summaryrefslogtreecommitdiff
path: root/board/samsung
Commit message (Collapse)AuthorAgeLines
* spl:falcon:trats Update Trats default board configuration file to support ↵Łukasz Majewski2013-01-03-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | FALCON MODE Support for a new command (defined at envs) - spl_export generates the ATAGS image necessary for fast boot. Afterwards, it is stored at ext4 partition. Generated image format: CRC [4B] SIZE [4B] PAYLOAD(ATAGS/DT) [SIZE] Remarks: - CRC is calculated only for PAYLOAD - SIZE is the size of PAYLOAD It is important to adjust ${splsize} when large image is generated. It is defined as hex, since ext4 related commands expect it. The ${spladdr} environment variable corresponds to CONFIG_SYS_SPL_ARGS_ADDR Additionally definitions for DFU have been refactored and support for EFI has been added as well. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* exynos5: Add DT based driver for SMC911X ethernetHatim RV2012-12-26-30/+85
| | | | | | | | | Add device tree based ethernet driver for SMC911X controller on SMDK5250 boards. Signed-off-by: Hatim Ali <hatim.rv@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* EXYNOS5: FDT: add initial dts file for EXYNOS5250, SMDK5250Hatim RV2012-12-26-0/+29
| | | | | | | | | | | | This patch adds initial dts file for EXYNOS5250 SoC. This dts file currently include only ethernet devices and properties. More devices to be added in subsequent patches. Also add the dts file for SMDK5250 board which uses the EXYNOS5250 dts file. Signed-off-by: Hatim Ali <hatim.rv@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* universal_c210: check the NULL pointer when get the PMICMinkyu Kang2012-12-11-0/+6
| | | | | | | | PMIC 2.0 require to test return pointer from pmic_get() Signed-off-by: Minkyu Kang <mk7.kang@samsung.com> Cc: Wolfgang Denk <wd@denx.de> Acked-by: Lukasz Majewski <l.majewski@samsung.com>
* SMDK5250: Enable pmic MAX77686Rajeshwari Shinde2012-12-11-4/+11
| | | | | | | | | Enabled pmic MAX77686 for SMDK5250. Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* universal_c210: fix compiler error and compiler warningMinkyu Kang2012-12-10-2/+6
| | | | | | | | | | | | | | | | | This patch fix following errors universal.c: In function 'init_pmic_lcd': universal.c:340: warning: implicit declaration of function 'get_pmic' universal.c:340: warning: initialization makes pointer from integer without a cast universal.c: In function 'lcd_power_on': universal.c:431: warning: initialization makes pointer from integer without a cast universal.c: At top level: universal.c:335: warning: 'init_pmic_lcd' defined but not used Signed-off-by: Minkyu Kang <mk7.kang@samsung.com> Cc: Donghwa Lee <dh09.lee@samsung.com> Cc: Lukasz Majewski <l.majewski@samsung.com> Tested-by: Piotr Wilczek <p.wilczek@samsung.com>
* Merge branch 'master' of git://git.denx.de/u-boot into resolveMinkyu Kang2012-12-10-26/+319
|\ | | | | | | | | | | | | | | | | | | | | Conflicts: README board/samsung/universal_c210/universal.c drivers/misc/Makefile drivers/power/power_fsl.c include/configs/mx35pdk.h include/configs/mx53loco.h include/configs/seaboard.h
| * arm:universal_c210:pmic: Adjust C210 Universal target platform board to new ↵Łukasz Majewski2012-11-14-4/+11
| | | | | | | | | | | | | | | | | | | | | | PMIC framework Move pmic_init() function call from board_init() to power_init_board() to work with new PMIC/POWER framework. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com>
| * arm:goni:pmic: Adjust GONI target platform board to new PMIC frameworkŁukasz Majewski2012-11-14-3/+10
| | | | | | | | | | | | | | | | | | Move pmic_init() function call from board_init() to power_init_board() to work with new PMIC/POWER framework. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com>
| * power:pmic: Rename CONFIG_PMIC* defines to CONFIG_POWERŁukasz Majewski2012-11-14-2/+2
| | | | | | | | | | | | | | | | Rename all CONFIG_PMIC* defines to CONFIG_POWER* Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Stefano Babic <sbabic@denx.de>
| * arm:trats:pmic: Support for charging battery at Samsung's TRATS boardŁukasz Majewski2012-11-14-1/+48
| | | | | | | | | | | | | | | | | | The battery connected to Samsung's Trats development board is now charged when voltage drops below threshold. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com>
| * arm:trats:pmic: Power consumption reduction state for Samsung's TRATS boardŁukasz Majewski2012-11-14-0/+58
| | | | | | | | | | | | | | | | | | When charging battery is necessary, the development board needs to be turned into low power mode for better efficiency. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com>
| * arm:trats:pmic: Enable battery support at Samsung's TRATS boardŁukasz Majewski2012-11-14-0/+2
| | | | | | | | | | | | | | | | | | Support for TRATS battery has been added. It is treated as a "normal" power related device and thereof controlled by pmic/power subsystem. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com>
| * arm:trats:pmic: Enable fuel-gauge (MAX17042) at Samsung's TRATS boardŁukasz Majewski2012-11-14-0/+2
| | | | | | | | | | | | | | | | | | FG IC built into the MAX8997 device (compliant to MAX17042) is enabled at TRATS. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com>
| * arm:trats:pmic: Enable MUIC (MAX8997) at Samsung's TRATS boardŁukasz Majewski2012-11-14-1/+2
| | | | | | | | | | | | | | | | MUIC IC built into the MAX8997 device is enabled at TRATS. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com>
| * arm:trats:pmic: Default PMIC(MAX8997) initialization for Samsung's TRATS boardŁukasz Majewski2012-11-14-0/+151
| | | | | | | | | | | | | | | | Default PMIC (MAX8997) initialization for Samsung's TRATS development board. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com>
| * pmic: Enable power_board_init() support at TRATSŁukasz Majewski2012-11-14-4/+11
| | | | | | | | | | | | | | | | Enable support for power_board_init() method at TRATS board. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com>
| * pmic: Extend PMIC framework to support multiple instances of PMIC devicesŁukasz Majewski2012-11-14-15/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The PMIC framework has been extended to support multiple instances of the variety of devices responsible for power management. This change allows supporting of e.g. fuel gauge, charger, MUIC (Micro USB Interface Circuit). Power related includes have been moved to ./include/power directory. This is a first of a series of patches - in the future "pmic" will be replaced with "power". Two important issues: 1. The PMIC needs to be initialized just after malloc is configured 2. It uses list to hold information about available PMIC devices Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Stefano Babic <sbabic@denx.de>
* | EXYNOS5: Enable SPI booting.Rajeshwari Shinde2012-11-15-3/+30
| | | | | | | | | | | | | | This patch enables SPI Booting for EXYNOS5 Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | EXYNOS5: Enable SPIHatim RV2012-11-15-0/+4
| | | | | | | | | | | | | | | | | | This patch enables SPI driver for EXYNOS5. Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Signed-off-by: Hatim Ali <hatim.rv@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | exynos4: universal_C210: add display supportPiotr Wilczek2012-11-15-0/+166
| | | | | | | | | | | | | | | | | | | | | | This patch add support for display on Universal C210 board. Width of displyed logo must be not bigger than 480 pixel and is limited by width of the screen. Tizen logo size is 520x120 pixels and should be resized. Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | exynos4: universal_C210: use software SPIPiotr Wilczek2012-11-15-18/+69
| | | | | | | | | | | | | | | | This patch use software spi on Samsung Universal C210 board. Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | SMDK5250: Config: Enable MAX77686 pmic chipRajeshwari Shinde2012-11-15-0/+4
| | | | | | | | | | | | | | This patch enables MAX77686 pmic chip for SMDK5250. Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | arm: trats: Power down core 1Piotr Wilczek2012-11-15-0/+4
| | | | | | | | | | | | | | | | This patch turns power down for unused core 1 Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | arm:exynos4:universal: Eliminated low level initPiotr Wilczek2012-11-15-396/+8
| | | | | | | | | | | | | | | | Low level initialisation is done by another bootloader Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | arm:exynos4:universal: Use pinmux for mmc configurationPiotr Wilczek2012-11-15-59/+15
| | | | | | | | | | | | | | | | This patch use the pinmux for mmc configuration for Universal C210 Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | arm:exynos4:trats: Use pinmux for mmc configurationPiotr Wilczek2012-11-15-56/+12
| | | | | | | | | | | | | | | | | | This patch use the pinmux for mmc configuration for Trats Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | arm:exynos4:trats: Fix SDRAM sizePiotr Wilczek2012-11-15-1/+7
|/ | | | | | | | Full 1GiB is visible Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* Origen: Add default clock settings for multimedia IPsAnnamalai Lakshmanan2012-10-26-1/+110
| | | | | | | | | | Added clock settings for MFC, FIMC, FB and G3D. They are clocked to maximum respective frequencies as per datasheet. Signed-off-by: Annamalai Lakshmanan <annamalai.lakshmanan@linaro.org> Signed-off-by: Giridhar Maruthy <giridhar.maruthy@linaro.org> Signed-off-by: Inderpal Singh <inderpal.singh@linaro.org> Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
* common: Discard the __u_boot_cmd sectionMarek Vasut2012-10-22-3/+0
| | | | | | | | | | | The command declaration now uses the new LG-array method to generate list of commands. Thus the __u_boot_cmd section is now superseded and redundant and therefore can be removed. Also, remove externed symbols associated with this section from include/command.h . Signed-off-by: Marek Vasut <marex@denx.de> Cc: Joe Hershberger <joe.hershberger@gmail.com> Cc: Mike Frysinger <vapier@gentoo.org>
* common: Add .u_boot_list into all linker filesMarek Vasut2012-10-22-1/+11
| | | | | | | | | | Add section for the linker-generated lists into all possible linker files, so that everyone can easily use these lists. This is mostly a mechanical adjustment. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Joe Hershberger <joe.hershberger@gmail.com> Cc: Mike Frysinger <vapier@gentoo.org>
* IPL: Remove remains of OneNAND IPLMarek Vasut2012-09-18-162/+0
| | | | | | | | | | | After removing the Apollon board, remove the OneNAND IPL too. There are no users for it any more. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Minkyu Kang <promsoft@gmail.com> Cc: Tom Rini <trini@ti.com> Acked-by: Minkyu Kang <mk7.kang@samsung.com>
* i2c:soft:multi: Enable soft I2C multibus at Trats development boardŁukasz Majewski2012-09-17-0/+15
| | | | | | | | | This commit enables multibus handling at Samsung's Trats development board. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Acked-by: Heiko Schocher <hs@denx.de>
* i2c:soft:multi: Support for multiple soft I2C buses at Samsung boardsŁukasz Majewski2012-09-17-0/+108
| | | | | | | | | | | | | | | | | | Support for multiple soft I2C buses. Multibus I2C support is achieved by defining get_multi_{sda|scl}_pin functions to switch between multiple "soft" I2C buses. Common definition of I2C_X I2C buses is provided at <i2c.h>. TEST HW: Samsung's Exynos4210 evt.0.1 - Trats development board Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Heiko Schocher <hs@denx.de> Cc: Minkyu Kang <mk7.kang@samsung.com> Acked-by: Heiko Schocher <hs@denx.de>
* Merge branch 'master' of git://git.denx.de/u-boot-usbWolfgang Denk2012-09-02-0/+8
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'master' of git://git.denx.de/u-boot-usb: MUSB driver: Timeout is never detected as the while loop does not end usb: fix ulpi_set_vbus prototype pxa25x: Add UDC registers definitions USB: Fix strict aliasing in ohci-hcd usb: Optimize USB storage read/write ehci: Optimize qTD allocations usb_stor_BBB_transport: Do not delay when not required usb_storage: Remove EHCI constraints usb_storage: Restore non-EHCI support ehci-hcd: Boost transfer speed ehci: cosmetic: Define used constants ehci: Fail for multi-transaction interrupt transfers arm:trats: Enable g_dnl composite USB gadget with embedded DFU function on TRATS arm:trats: Support for USB UDC driver at TRATS board. dfu:cmd: Support for DFU u-boot command dfu: MMC specific routines for DFU operation dfu: DFU backend implementation dfu:usb: DFU USB function (f_dfu) support for g_dnl composite gadget dfu:usb: Support for g_dnl composite download gadget. ehci: cosmetic: Define the number of qt_buffers Signed-off-by: Wolfgang Denk <wd@denx.de>
| * arm:trats: Support for USB UDC driver at TRATS board.Lukasz Majewski2012-09-01-0/+8
| | | | | | | | | | | | | | | | | | Support for USB UDC driver at trats board. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Vasut <marex@denx.de> Cc: Minkyu Kang <mk7.kang@samsung.com>
* | SMDK5250: Enable UART and MMC for Exynos5250 Rev 1.0Rajeshwari Shinde2012-09-01-3/+3
| | | | | | | | | | | | | | This patch sets UART3 and MMC channle 0 for Exynos5250 Rev 1.0 Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | Exynos5: DDR3: Add DDR3 memory setup for Exynos5250 Rev 1.0Rajeshwari Shinde2012-09-01-464/+486
| | | | | | | | | | | | | | | | The patch adds the memory initialization sequence of DDR3. Signed-off-by: Hatim Ali <hatim.rv@samsung.com> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | EXYNOS5: CLOCK: Add clock support for Exynos5250 Rev 1.0Rajeshwari Shinde2012-09-01-440/+1139
| | | | | | | | | | | | | | | | Add new clock values for Exynos5250 Rev 1.0 Signed-off-by: Hatim Ali <hatim.rv@samsung.com> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | SMDK5250: Add smdk5250-uboot-spl.ldsRajeshwari Shinde2012-09-01-0/+66
| | | | | | | | | | | | | | | | | | | | | | | | | | Default spl/u-boot-spl.lds created by spl/Makefile resolves the spl text load addr to 0x0. As 0x0 belongs to iROM addr so Global variables can not be used. Adding specific smdk5250-uboot-spl.lds makes possible to use Global Variables in spl. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | SMDK5250: SPL: Define parametric board initializerRajeshwari Shinde2012-09-01-0/+69
|/ | | | | | | | | | | | Define table-driven configuration mechanism for SMDK5250 rather than hard-coding board initialization parameters. Signed-off-by: Che-Liang Chiou <clchiou@chromium.org> Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Tom Wai-Hong Tam <waihong@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* CONFIG: SMDK5250: I2C: Enable I2CRajeshwari Shinde2012-07-31-1/+29
| | | | | | | | | | | This enables I2C support on smdk5250. Pinmux setting moved to board file to avoid repeated setting of gpio lines. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org>
* EXYNOS: SMDK5250: Enable the pinmux setupRajeshwari Shinde2012-07-07-138/+38
| | | | | | | | | | Use the pinmux configuration function for SMDK5250. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Acked-by: Chander Kashyap <chander.kashyap@linaro.org> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* misc:pmic:trats: Correct procedure of enabling/disabling USB regulatorsŁukasz Majewski2012-07-07-4/+11
| | | | | | | | | In the MAX8997, LDO regulators needs to preserve previously set voltage values. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* TRATS: initialize panel_info data structure in board fileDonghwa Lee2012-07-07-34/+36
| | | | | | | | | | | | panel_info data structure is gloable variable, so, I have initialized it in board file. If it is initialized in init_panel_info() like existing, it can't be used in drv_lcd_init() in common/lcd.c because init_panel_info() is called after drv_lcd_init(). Signed-off-by: Donghwa Lee <dh09.lee@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* EXYNOS: display 32bpp bitmap TIZEN logoDonghwa Lee2012-05-25-0/+8
| | | | | | | | | | | | | This patch supports drawing 32bpp bitmap TIZEN logo in exynos fb. "tizen_hd_logo.h" data is compressed from trats_logo.bmp to trats_logo.bmp.gz by gzip and converted to tizen_hd_logo.h header file format by some application. The logo data is decompressed in the exynos fb driver by bmp_display(). Signed-off-by: Donghwa Lee <dh09.lee@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Anatolij Gustschin <agust@denx.de>
* LCD: support another s6e8ax0 panel typeDonghwa Lee2012-05-25-0/+8
| | | | | | | | | | | s6e8ax0 panel has many panel of types. This patch support another panel on TIZEN lunchbox board(HWREVISION 2). This panel has reversed panel display type. So, I had added necessary command. Signed-off-by: Donghwa Lee <dh09.lee@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Anatolij Gustschin <agust@denx.de>
* EXYNOS: Change bits per pixel value proper for u-boot.Donghwa Lee2012-05-15-1/+1
| | | | | | | | | | vl_bpix of vidinfo_t was changed proper value for u-boot. It is used to multiple of 2 by using NBITS() macro. Signed-off-by: Donghwa Lee <dh09.lee@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* EXYNOS: support TRATS board display functionDonghwa Lee2012-05-15-0/+146
| | | | | | | | | This patch support TRATS board configuration and display function. Signed-off-by: Donghwa Lee <dh09.lee@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* SMDK5250: fix compiler warningMinkyu Kang2012-05-15-1/+1
| | | | | | | | | this patch fixed following warning. tzpc_init.c: In function 'tzpc_init': tzpc_init.c:35: warning: assignment from incompatible pointer type Signed-off-by: Minkyu Kang <mk7.kang@samsung.com> Cc: Chander Kashyap <chander.kashyap@linaro.org>
generated by cgit v1.1 at 2024-11-05 08:41:56 +0000