summaryrefslogtreecommitdiff
path: root/board/gateworks
Commit message (Collapse)AuthorAgeLines
* imx: ventana: add econfig commandTim Harvey2014-08-20-85/+194
| | | | | | | | | | | | The Gateworks Ventana EEPROM contains a set of configuration bits that affect the removal of device-tree nodes that support peripherals that do not exist on sub-loaded boards. This patch adds: - a structure to define a config bit name, dt node alias, bit position - an array of supported configuration items - an econfig command to get/set/list configuration bits - use of the array when adjusting the FDT prior to boot Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* imx: ventana: leave PCI reset de-asserted if PCI enabledTim Harvey2014-08-20-5/+3
| | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* imx: ventana: add iomux for PCISKT_WDIS# gpioTim Harvey2014-08-20-0/+17
| | | | | | | The PCISKT_WDIS# gpio allows for asserting WDIS# going to the various PCIe sockets on the Ventana board. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* imx: ventana: enable SION bit on gpio outputsTim Harvey2014-08-20-63/+70
| | | | | | | Enable the SION bit on gpio outputs that we wish to be able to read the value of. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* imx: ventana: configure i2c_dis# pin properly for gw53xxTim Harvey2014-08-20-2/+2
| | | | | | | | The i2c_dis# pinmux/padconf was missing for the GW53xx (this feature was added to the GW53xx on revB PCB's). Additionally, remove the duplicate config for GW54xx. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* imx: ventana: add missing crlf to printTim Harvey2014-08-20-1/+1
| | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* imx: ventana: add video enable gpio pinmux for GW54xxTim Harvey2014-08-20-0/+2
| | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* imx: ventana: add appropriate delay following GSC i2c writeTim Harvey2014-08-20-1/+1
| | | | | | | The Gateworks System Controller EEPROM config is flash based. Add a delay following writes to avoid errors on back-to-back writes. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* imx: ventana: remove caam disable per eeprom bitTim Harvey2014-08-20-1/+1
| | | | | | | During manufacturing this bit is not getting enabled when it should be, so we will ignore it. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* imx: ventana: set dynamic env var for flash layoutTim Harvey2014-08-20-0/+4
| | | | | | | | | | | NAND devices have differing layouts with respect to page size and pages per block. These parameters affect the parameters that need to be passed to mkfs.ubifs and ubinize used to create UBI images. The various NAND chips supported by Gateworks Ventana fall into two different layouts which we refer to as 'normal' and 'large'. This layout is useful when referencing ubi files to download and flash so we create a dynamic env variable for it. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* Merge branch 'master' of git://git.denx.de/u-boot-armStefano Babic2014-08-11-0/+29
|\ | | | | | | | | | | | | Conflicts: boards.cfg Signed-off-by: Stefano Babic <sbabic@denx.de>
| * Add board MAINTAINERS filesMasahiro Yamada2014-07-30-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We have switched to Kconfig and the boards.cfg file is going to be removed. We have to retrieve the board status and maintainers information from it. The MAINTAINERS format as in Linux Kernel would be nice because we can crib the scripts/get_maintainer.pl script. After some discussion, we chose to put a MAINTAINERS file under each board directory, not the top-level one because we want to collect relevant information for a board into a single place. TODO: Modify get_maintainer.pl to scan multiple MAINTAINERS files. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Suggested-by: Tom Rini <trini@ti.com> Acked-by: Simon Glass <sjg@chromium.org>
| * kconfig: add board Kconfig and defconfig filesMasahiro Yamada2014-07-30-0/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds: - arch/${ARCH}/Kconfig provide a menu to select target boards - board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig set CONFIG macros to the appropriate values for each board - configs/${TARGET_BOARD}_defconfig default setting of each board (This commit was automatically generated by a conversion script based on boards.cfg) In Linux Kernel, defconfig files are located under arch/${ARCH}/configs/ directory. It works in Linux Kernel since ARCH is always given from the command line for cross compile. But in U-Boot, ARCH is not given from the command line. Which means we cannot know ARCH until the board configuration is done. That is why all the "*_defconfig" files should be gathered into a single directory ./configs/. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org>
* | pmic: pmic_pfuze100: Use a shorter name for PMIC nameFabio Estevam2014-08-08-1/+1
| | | | | | | | | | | | | | | | | | | | | | It is redundant to use 'PFUZE100_PMIC' as the PMIC name because we already know it is a PMIC. Call it simply 'PFUZE100' instead. Cc: Tim Harvey <tharvey@gateworks.com> Cc: Markus Niebel <Markus.Niebel@tq-group.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* | mx6: Remove duplication of iomuxc structureFabio Estevam2014-07-23-2/+1
|/ | | | | | | | | | | | | | | There is no need to keep iomuxc_base_regs structure as it serves the exact same purpose of the iomuxc structure, which is to provide access to the GPR registers. The additional fields of iomuxc_base_regs are not used. Other advantage of 'iomuxc' is that it has a shorter name and the variable declarations can fit into a single line. So remove iomuxc_base_regs structure and use iomuxc instead. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
* imx: ventana: switch to SPLTim Harvey2014-06-06-51/+486
| | | | | | | | | | | | | | | | | | | | Switch to an SPL image. The SPL for Ventana does the following: - setup i2c and read the factory programmed EEPROM to obtain DRAM config and model for board-specific calibration data - configure DRAM per CPU/size/layout/devices/calibration - load u-boot.img from NAND and jump to it This allows for a single SPL+u-boot.img to replace the previous multiple boa configurations. Cc: Stefan Roese <sr@denx.de> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Andy Ng <andreas2025@gmail.com> Cc: Eric Nelson <eric.nelson@boundarydevices.com> Cc: Tapani Utriainen <tapani@technexion.com> Cc: Tom Rini <trini@ti.com> Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* imx: ventana: auto-configure for IMX6Q vs IMX6DLTim Harvey2014-06-06-186/+312
| | | | | | | | | | | | | | use the new iomux function and a macros to create a multi-dimensional array of iomux values without duplicating the defintions. Cc: Stefan Roese <sr@denx.de> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Andy Ng <andreas2025@gmail.com> Cc: Eric Nelson <eric.nelson@boundarydevices.com> Cc: Tapani Utriainen <tapani@technexion.com> Cc: Tom Rini <trini@ti.com> Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* imx: ventana: split read_eeprom into standalone fileTim Harvey2014-06-06-89/+102
| | | | | | | | | | | | | Split the read_eeprom function out so that it can be shared (ie with SPL) Cc: Stefan Roese <sr@denx.de> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Andy Ng <andreas2025@gmail.com> Cc: Eric Nelson <eric.nelson@boundarydevices.com> Cc: Tapani Utriainen <tapani@technexion.com> Cc: Tom Rini <trini@ti.com> Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* imx: ventana: add HDMI and LVDS display capabilityTim Harvey2014-05-09-0/+133
| | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* imx6: ventana: fix system-serial dt propertyTim Harvey2014-05-09-1/+1
| | | | | | | Fix typo in setting of system-serial property causing the prop len to be off by 1. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* ventana: Add support for the LTC3676 PMICTim Harvey2014-05-09-23/+57
| | | | | | | | | | | The LTC3676 PMIC is used instead of the PFUZE100 PMIC on the GW51xx/GW52xx/GW53xx Ventana baseboards. In order to support the IMX6Q SoC at 1GHz on those baseboards, we need to adjust the voltage scaling for the SW1 and SW3 DC/DC converters on the LTC3676 for 1225mV. Note that the scalar values for the LTC3676 are board-specific as they relate to a resistor devider chosen by the board design. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* ventana: use non-generic pfuze100 initTim Harvey2014-05-09-2/+3
| | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* ventana: remove redundant includeTim Harvey2014-04-28-1/+0
| | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* ventana: fixed comments in eeprom headerTim Harvey2014-04-28-7/+7
| | | | | | | Fix several invalid comments regarding the EEPROM structure used by Gateworks Ventana boards. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* ventana: Add Gateworks Ventana family supportTim Harvey2014-03-12-0/+1713
Gateworks Ventana is a product family based on the i.MX6. This patch adds support for all boards in the Ventana family. Where possible, data from the boards EEPROM is used to determine various details about the board at runtime. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
generated by cgit v1.1 at 2024-11-18 16:12:43 +0000