summaryrefslogtreecommitdiff
path: root/board/freescale
Commit message (Collapse)AuthorAgeLines
...
| * mx7dsabresd: Use Adrian's NXP email addressFabio Estevam2016-02-21-1/+1
| | | | | | | | | | | | Use the new NXP email address for the board maintainer. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
* | Use correct spelling of "U-Boot"Bin Meng2016-02-06-171/+171
|/ | | | | | | | | | Correct spelling of "U-Boot" shall be used in all written text (documentation, comments in source files etc.). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
* imx: mx6: implement board_mmc_get_env_devPeng Fan2016-02-04-0/+20
| | | | | | | | | | | | Implement board_mmc_get_env_dev for the boards. Following is examples: SD1/SD2/SD3: return devno; SD2/SD3: return devno - 1; SD2/SD4: if (devno == 2), return dev - 2; return dev - 1; Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
* imx: mx7dsabresd: move mmc_get_env_devno to soc codePeng Fan2016-02-04-15/+5
| | | | | | | | | | | Move mmc_get_env_devno to soc.c and rename to mmc_get_env_dev to match the one in common/env_mmc.c. Introduce a weak function board_mmc_get_env_dev. Different boards can implement this according to sdhc controller which is used by the board. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
* imx: mx6sxsabresd: Add MCIMX28LCD display supportYe Li2016-02-02-0/+61
| | | | | | | | The i.MX6SX SABRESD board supports MCIMX28LCD (800x480x24) at LCDIF1 port, enable this display feature by adding relevant BSP codes and configurations. Signed-off-by: Ye Li <ye.li@nxp.com>
* imx: MX6DQ{P}/DL:SABRESD Fix bmode eMMC failureYe Li2016-02-02-1/+1
| | | | | | | | | | | The BOOTCFG value used by bmode for SABRESD eMMC boot are actually for SD card. Fixed the value to correct one. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Fabio Estevam <fabio.estevam@nxp.com>
* mx6slevk: Fix the reset delay for the the LAN8720 PHYFabio Estevam2016-02-02-1/+1
| | | | | | | | | | | | | | | Since commit 59370f3fcd1350 ("net: phy: delay only if reset handler is registered") Ethernet is no longer functional. This commit does not have an issue in itself, but it revelead a problem with the Ethernet initialization. According to the LAN8720 datasheet tpurstd (time that reset line should stay asserted) is 25ms. So do as suggested in order to have Ethernet working again. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
* imx: mx6sxsabreauto: Add support for mx6sx SABREAUTO boardYe Li2016-02-02-0/+668
| | | | | | | Initial version for mx6sx SABREAUTO board support with features: PMIC, QSPI, NAND flash, SD/MMC, USB, Ethernet, I2C, IO Expander. Signed-off-by: Ye Li <ye.li@nxp.com>
* Merge branch 'master' of git://git.denx.de/u-boot-netTom Rini2016-01-28-12/+12
|\
| * arm: ls1021atwr: Do not wrap pci_eth_init() with CONFIG_TSEC_ENETBin Meng2016-01-28-2/+2
| | | | | | | | | | | | | | The call to pci_eth_init() should not be wrapped with CONFIG_TSEC_ENET. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * powerpc: p1010rdb: Do not wrap pci_eth_init() with CONFIG_TSEC_ENETBin Meng2016-01-28-2/+2
| | | | | | | | | | | | | | The call to pci_eth_init() should not be wrapped with CONFIG_TSEC_ENET. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * powerpc: mpc8548cds: Do not wrap pci_eth_init() with CONFIG_TSEC_ENETBin Meng2016-01-28-2/+2
| | | | | | | | | | | | | | The call to pci_eth_init() should not be wrapped with CONFIG_TSEC_ENET. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * powerpc: mpc8572ds: Do not wrap pci_eth_init() with CONFIG_TSEC_ENETBin Meng2016-01-28-2/+2
| | | | | | | | | | | | | | The call to pci_eth_init() should not be wrapped with CONFIG_TSEC_ENET. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * powerpc: c29xpcie: Do not wrap pci_eth_init() with CONFIG_TSEC_ENETBin Meng2016-01-28-2/+2
| | | | | | | | | | | | | | The call to pci_eth_init() should not be wrapped with CONFIG_TSEC_ENET. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * powerpc: bsc9132qds: Do not wrap pci_eth_init() with CONFIG_TSEC_ENETBin Meng2016-01-28-2/+2
| | | | | | | | | | | | | | The call to pci_eth_init() should not be wrapped with CONFIG_TSEC_ENET. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriqTom Rini2016-01-27-146/+377
|\ \
| * | armv8/ls1043aqds: add QSPI boot supportQianyu Gong2016-01-27-1/+5
| | | | | | | | | | | | | | | | | | | | | Enable the U-Boot Driver Model(DM) to use the Freescale QSPI driver. Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * | armv8/ls1043aqds: add QSPI support in SD bootGong Qianyu2016-01-27-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | QSPI and IFC are pin-multiplexed on LS1043A. So we use ls1043aqds_sdcard_ifc_defconfig to support IFC in SD boot and ls1043aqds_sdcard_qspi_defconfig to support QSPI in SD boot. Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * | armv8/ls1043aqds: Select lpuart pins of various muxesShaohui Xie2016-01-27-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Set Board Configuration Register to select the lpuart pins of various muxes. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * | secure_boot: change error handler for esbc_validateAneesh Bansal2016-01-27-1/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In case of error while executing esbc_validate command, SNVS transition and issue of reset is required only for secure-boot. If boot mode is non-secure, this is not required. Similarly, esbc_halt command which puts the core in Spin Loop is applicable only for Secure Boot. Signed-off-by: Aneesh Bansal <aneesh.bansal@nxp.com> Acked-by: Ruchika Gupta <ruchika.gupta@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * | secure_boot: enable chain of trust for ARM platformsAneesh Bansal2016-01-27-0/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Chain of Trust is enabled for ARM platforms (LS1021 and LS1043). In board_late_init(), fsl_setenv_chain_of_trust() is called which will perform the following: - If boot mode is non-secure, return (No Change) - If boot mode is secure, set the following environmet variables: bootdelay = 0 (To disable Boot Prompt) bootcmd = CONFIG_CHAIN_BOOT_CMD (Validate and execute Boot script) Signed-off-by: Aneesh Bansal <aneesh.bansal@nxp.com> Acked-by: Ruchika Gupta <ruchika.gupta@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * | secure_boot: create function to determine boot modeAneesh Bansal2016-01-27-0/+53
| | | | | | | | | | | | | | | | | | | | | | | | | | | A function is created to detrmine if the boot mode is secure or non-secure for differnt SoC's. Signed-off-by: Aneesh Bansal <aneesh.bansal@nxp.com> Acked-by: Ruchika Gupta <ruchika.gupta@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * | SECURE BOOT: support for validation of dynamic imageAneesh Bansal2016-01-25-16/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some images to be validated are relocated to a dynamic address at run time. So, these addresses cannot be known befor hand while signing the images and creating the header offline. So, support is required to pass the image address to the validate function as an argument. If an address is provided to the function, the address field in Header is not read and is treated as a reserved field. Signed-off-by: Saksham Jain <saksham@freescale.com> Signed-off-by: Aneesh Bansal <aneesh.bansal@freescale.com> Acked-by: Ruchika Gupta <ruchika.gupta@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * | SECURE BOOT: separate function created for signatureAneesh Bansal2016-01-25-44/+54
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The code for image hash calculation, hash calculation from RSA signature and comparison of hashes has been mobed to a separate function. Signed-off-by: Saksham Jain <saksham@freescale.com> Signed-off-by: Aneesh Bansal <aneesh.bansal@freescale.com> Acked-by: Ruchika Gupta <ruchika.gupta@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * | SECURE BOOT: separate functions for reading keysAneesh Bansal2016-01-25-73/+96
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Separate functions are created for reading and checking the sanity of Public keys: - read_validate_single_key - read_validate_ie_tbl - read_validate_srk_table Signed-off-by: Saksham Jain <saksham@freescale.com> Signed-off-by: Aneesh Bansal <aneesh.bansal@freescale.com> Acked-by: Ruchika Gupta <ruchika.gupta@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * | SECURE BOOT: change prototype of fsl_secboot_validate functionAneesh Bansal2016-01-25-12/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The prototype and defination of function fsl_secboot_validate has been changed to support calling this function from another function within u-boot. Only two aruments needed: 1) header address - Mandatory 2) SHA256 string - optional Signed-off-by: Saksham Jain <saksham@freescale.com> Signed-off-by: Aneesh Bansal <aneesh.bansal@freescale.com> Acked-by: Ruchika Gupta <ruchika.gupta@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * | freescale/qixis: Add support for booting from SD/QSPIGong Qianyu2016-01-25-0/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1.Use "qixis_reset sd" to boot from SD 2.Use "qixis_reset sd_qspi" to boot from SD with QSPI support 3.Use "qixis_reset qspi" to boot from QSPI flash On some SoCs such as LS1021A and LS1043A, IFC and QSPI could be pin-multiplexed. So the switches are different between SD boot with IFC support and SD boot with QSPI support. The default booting from SD is with IFC support. Once QSPI is enabled(IFC disabled), only use I2C to access QIXIS. Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * | armv8/ls1043aqds: Add support for >2GB memoryShaohui Xie2016-01-25-3/+26
| | | | | | | | | | | | | | | | | | | | | This patch also exposes the complete DDR region(s) to Linux. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | | Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxTom Rini2016-01-25-66/+28
|\ \ \
| * | | powerpc/board/t4240rdb: Enable VID supportYing Zhang2016-01-25-1/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The fuse status register provides the values from on-chip voltage ID efuses programmed at the factory. These values define the voltage requirements for the chip. u-boot reads FUSESR and translates the values into the appropriate commands to set the voltage output value of an external voltage regulator. Signed-off-by: Ying Zhang <b40530@freescale.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * | | board/freescale/common: Check IR chip mode for VID supportYing Zhang2016-01-25-1/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | IR chip on all the boards are required to be used in Intel mode to support VID. VDD will not be adjusted if IR chip is used in other modes. Signed-off-by: Ying Zhang <b40530@freescale.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * | | powerpc: mpc85xx: Move set_liodns, setup_portals to common boot seqPrabhakar Kushwaha2016-01-25-65/+0
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Users migrating Freescale's PowerPC SoC U-Boot code to their custom board, often overlook the need to execute set_liodns() and setup_portals() being called by platform files. So Move set_liodns() and setup_portals() to common u-boot boot sequence Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | | imx: mx7dsabresd: support nandPeng Fan2016-01-24-0/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add pinmux settings. Add related macro definitions. Nand pin conflicts with emmc, so if want to enable nand, need to do hardware rework. After hardware rework, define CONFIG_NAND_MXS in board header file. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
* | | mx25pdk: Remove lowlevel_init.S fileFabio Estevam2016-01-24-11/+3
|/ / | | | | | | | | | | | | | | As the lowlevel_init function is empty we should better remove this assembly file entirely and use a dummy C function instead. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
* | m68k: M54418TWR: drop board/freescale/m54418twr/config.mkMasahiro Yamada2016-01-20-7/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The board/freescale/m54418twr/config.mk defined TEXT_BASE, which has the same value as CONFIG_SYS_TEXT_BASE. The TEXT_BASE is referenced by two files: - arch/m68k/cpu/mcf5445x/start.S and include/ - include/configs/M54418TWR.h Replace the references with CONFIG_SYS_TEXT_BASE and delete board/freescale/m54418twr/config.mk. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Angelo Dureghello <angelo at sysam.it>
* | m68k: move CONFIG_SYS_TEXT_BASE to defconfig filesMasahiro Yamada2016-01-20-108/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For historical reason, CONFIG_SYS_TEXT_BASE has been specified in various ways: [1] by board/${VENDOR}/${BOARD}/config.mk [2] by CONFIG_SYS_EXTRA_OPTIONS (This was "options" field of boards.cfg before Kconfig conversion) [3] by include/configs/${BOARD}.h [4] by configs/${BOARD}_defconfig Most of M68K boards use either [1] or [2], both of which we want to deprecate. Switch them into [4], which is the newest way (Kconfig). We still allow [3] too, because it is still used by many boards and we expect much time for conversion. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Angelo Dureghello <angelo at sysam.it> Reviewed-by: Simon Glass <sjg@chromium.org>
* | Add more SPDX-License-Identifier tagsTom Rini2016-01-19-69/+23
| | | | | | | | | | | | | | | | | | In a number of places we had wordings of the GPL (or LGPL in a few cases) license text that were split in such a way that it wasn't caught previously. Convert all of these to the correct SPDX-License-Identifier tag. Signed-off-by: Tom Rini <trini@konsulko.com>
* | Fix GCC format-security errors and convert sprintfs.Ben Whitten2016-01-14-13/+13
| | | | | | | | | | | | | | | | | | | | | | With format-security errors turned on, GCC picks up the use of sprintf with a format parameter not being a string literal. Simple uses of sprintf are also converted to use strcpy. Signed-off-by: Ben Whitten <ben.whitten@gmail.com> Acked-by: Wolfgang Denk <wd@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
* | block: pass block dev not num to read/write/erase()Stephen Warren2016-01-13-1/+1
|/ | | | | | | | | | | This will allow the implementation to make use of data in the block_dev structure beyond the base device number. This will be useful so that eMMC block devices can encompass the HW partition ID rather than treating this out-of-band. Equally, the existence of the priv field is crying out for this patch to exist. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* MAINTAINERS/mailmap: Update my email addressFabio Estevam2016-01-11-8/+8
| | | | | | Update my email address to the NXP account. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
* Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2016-01-08-35/+4
|\
| * pfuze: Fix unsigned variable for less-than-zero comparisonYe.Li2016-01-07-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | According to the Coverity result, a unsigned int variable is used fo less- than-zero comparison, the result is never true. Need to fix the variable type to signed int. Signed-off-by: Ye.Li <B37916@freescale.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
| * mx6sabresd: Simplify the Ethernet PHY configurationFabio Estevam2016-01-07-34/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As per the AR8031 datasheet: "For a reliable power on reset, suggest to keep asserting the reset low long enough (10ms) to ensure the clock is stable and clock-to-reset 1ms requirement is satisfied." So do as suggested and also add a 100us delay after deasserting the reset line to guarantee that the PHY ID can be read correctly and the Atheros 8031 PHY driver can be loaded automatically. This results in a simpler code. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* | MAINTAINERS, .mailmap: Update my email addressYork Sun2016-01-08-2/+2
|/ | | | | | Change from yorksun@freescale.com to york.sun@nxp.com. Signed-off-by: York Sun <york.sun@nxp.com>
* qemu-ppce500: pass 'range_id' around in pci_map_regionMiao Yan2016-01-04-1/+1
| | | | | | | | | | In pci_map_region(), pass 'range_id' to fdt_read_range(), otherwise the same address will be mapped again in other calls to pci_map_region() Signed-off-by: Miao Yan <yammiaobest@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alexander Graf <agraf@suse.de>
* Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2016-01-03-6/+91
|\
| * imx: mx6qsabreauto: support lvds displayPeng Fan2016-01-03-3/+84
| | | | | | | | | | | | | | | | | | | | | | Move setup_display from board_early_init_f to board_init. Add more clock settings. Add blacklight iomux setting. Add display_info_t info for the lvds screen. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
| * mx6sxsabresd: Fix Ethernet PHY reset sequenceFabio Estevam2015-12-07-3/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 59370f3fcd1350 ("net: phy: delay only if reset handler is registered") Ethernet is no longer functional. This commit does not have an issue in itself, but it revelead a problem with the Ethernet initialization. Fix this by calling enable_fec_anatop_clock() earlier and also by adding a 10ms reset delay as recommended in the AR8031 datasheet. Suggested-by: Jörg Krause <joerg.krause@embedded.rocks> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
* | armv8/ls1043aqds/rcw: change core frequency to 1600MHzMingkai Hu2015-12-17-4/+4
| | | | | | | | | | | | | | Change RCW for SD boot and NAND boot. Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | armv8/ls1043ardb/rcw: change core frequency to 1600MHzMingkai Hu2015-12-17-4/+4
| | | | | | | | | | | | | | Change RCW for SD boot and NAND boot. Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
generated by cgit v1.1 at 2024-11-07 19:08:07 +0000