summaryrefslogtreecommitdiff
path: root/board/freescale
Commit message (Collapse)AuthorAgeLines
* NXP: Introduce board/freescale/common/Kconfig and migrate CHAIN_OF_TRUSTTom Rini2017-01-24-0/+64
| | | | | | | | | Introduce board/freescale/common/Kconfig so that we have a single place for CONFIG options that are shared between ARM and PowerPC NXP platforms. Cc: York Sun <york.sun@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: York Sun <york.sun@nxp.com>
* Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini2017-01-19-0/+206
|\
| * armv8: ls1012a: define esdhc_status_fixup for RDB boardYangbo Lu2017-01-18-0/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On LS1012ARDB board, three dual 1:4 mux/demux devices drive the SDHC2 signals to eMMC, SDIO wifi, SPI and Ardiuno shield. Only when we select eMMC and SDIO wifi, the SDHC2 could be used. Otherwise, the command inhibit bits of eSDHC2_PRSSTAT register will never release. This would cause below continious error messages in linux since it uses polling mode to detect card. "mmc1: Controller never released inhibit bit(s)." "mmc1: Controller never released inhibit bit(s)." "mmc1: Controller never released inhibit bit(s)." This patch is to define esdhc_status_fixup function for RDB to disable SDHC2 status if no SDIO wifi or eMMC is selected. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: ls1012a: define esdhc_status_fixup for QDS boardYangbo Lu2017-01-18-0/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The LS1012AQDS board has a hardware issue. When there is no eMMC adapter card inserted in SDHC2 adapter slot, the command inhibit bits of eSDHC2_PRSSTAT register will never release. This would cause below continious error messages in linux since it uses polling mode to detect card. "mmc1: Controller never released inhibit bit(s)." "mmc1: Controller never released inhibit bit(s)." "mmc1: Controller never released inhibit bit(s)." This patch is to define esdhc_status_fixup function for QDS to disable SDHC2 status if no eMMC adapter card is detected. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * ls1046ardb: Add support power initializationHou Zhiqiang2017-01-18-0/+34
| | | | | | | | | | | | | | | | | | Add the chip power supply voltage initialization on LS1046ARDB. Add function power_init_board(), and it will initialize the PMIC and call the chip power initialization function. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * ls1046ardb: cpld: add API for selecting core voltHou Zhiqiang2017-01-18-0/+10
| | | | | | | | | | Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * pmic: pmic_mc34vr500: Add APIs to set/get SWx voltHou Zhiqiang2017-01-18-0/+96
| | | | | | | | | | | | Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | SPL: Adjust more debug prints for ulong entry_pointTom Rini2017-01-11-1/+1
|/ | | | | | | | With entry_point now being an unsigned long we need to adapt the last two debug prints to use %lX not %X. Fixes: 11e1479b9e67 ("SPL: make struct spl_image 64-bit safe") Signed-off-by: Tom Rini <trini@konsulko.com>
* mx6ullevk: Add missing MAINTAINERS for mx6ull_14x14_evk_plugin_defconfigJagan Teki2017-01-08-0/+1
| | | | | | | | | | | Add 'Peng Fan' as MAINTAINERS of configs/mx6ull_14x14_evk_plugin_defconfig which is missing in below commit "imx: mx6ull_14x14_evk: add plugin defconfig" (sha1: b90ebf49bb8f74afe68f696f59a0e24cc79f2031) Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Jagan Teki <jagan@openedev.com>
* ddr: fsl: Merge macro CONFIG_NUM_DDR_CONTROLLERS and CONFIG_SYS_NUM_DDR_CTRLSYork Sun2017-01-04-5/+5
| | | | | | | | These two macros are used for the same thing, the total number of DDR controllers for a given SoC. Use SYS_NUM_DDR_CTRLS in Kconfig and merge existing usage. Signed-off-by: York Sun <york.sun@nxp.com>
* powerpc: T2081QDS: Remove macro T2081QDSYork Sun2017-01-04-10/+10
| | | | | | Use TARGET_T2081QDS from Kconfig instead. Signed-off-by: York Sun <york.sun@nxp.com>
* powerpc: T2080RDB: Remove macro CONFIG_T2080RDBYork Sun2017-01-04-1/+1
| | | | | | Use TARGET_T2080RDB from Kconfig instead. Signed-off-by: York Sun <york.sun@nxp.com>
* powerpc: T2080QDS: Remove macro T2080QDSYork Sun2017-01-04-12/+12
| | | | | | Use TARGET_T2080QDS from Kconfig instead. Signed-off-by: York Sun <york.sun@nxp.com>
* powerpc: T1024RDB: Remove macro CONFIG_T1024RDBYork Sun2017-01-04-10/+10
| | | | | | | | Use TARGET_T1024RDB from Kconfig instead. Signed-off-by: York Sun <york.sun@nxp.com> [trini: Get missing hunk in board/freescale/t102xrdb/ddr.c] Signed-off-by: Tom Rini <trini@konsulko.com>
* powerpc: T1023RDB: Remove macro CONFIG_T1023RDBYork Sun2017-01-04-10/+10
| | | | | | Use TARGET_T1023RDB from Kconfig instead. Signed-off-by: York Sun <york.sun@nxp.com>
* mx6qsabreauto: Fix the EIM clock for the mx6qp variantFabio Estevam2017-01-02-0/+28
| | | | | | | | | | | | | | | | | | | On the MX6Q the aclk_eim_slow_podf field is '1' after POR, while on the MX6DQP it is '3'. This makes the EIM clock to be only 66MHz on the mx6qp variant, instead of 132 MHz. Instead of relying on the POR values for the CSMR1 register, make sure to manually configure the clk_eim_slow_sel field as '00' so that EIM clock is derived from AXI clock and the aclk_eim_slow_podf field as '1' so that EIM clock can be AXI clock divided by 2. This way a consistent EIM clock frequency is configured for all the mx6 variants. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Peng Fan <peng.fan@nxp.com>
* imx: mx6sllevk: add MAINTAINERS filePeng Fan2016-12-27-0/+7
| | | | | | | add MAINTAINERS files Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
* Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2016-12-18-2/+433
|\ | | | | | | | | | | Migrate CONFIG_ARCH_USE_MEMSET/MEMCPY with this merge. Signed-off-by: Tom Rini <trini@konsulko.com>
| * imx: mx6sllevk: add plugin supportPeng Fan2016-12-16-0/+161
| | | | | | | | | | | | | | Add plugin support for mx6sllevk board. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
| * arm: imx: add i.MX6SLL EVK board supportPeng Fan2016-12-16-0/+270
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add i.MX6SLL EVK board support. 1. Add imx6sll-evk device tree. 2. Enable SDHC/I2C/UART. 3. Enable REGULATOR/PMIC/I2C/GPIO/SDHC/PINCTRL driver. Boot Log: U-Boot 2016.11-00127-gc635871-dirty (Nov 24 2016 - 13:28:19 +0800) CPU: Freescale i.MX6SLL rev1.0 at 792MHz CPU: Commercial temperature grade (0C to 95C)Reset cause: POR Model: Freescale i.MX6SLL EVK Board Board: MX6SLL EVK DRAM: 2 GiB i2c bus 0 at 35258368, no gpio pinctrl state. PMIC: PFUZE100! DEV_ID=0x10 REV_ID=0x21 MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 In: serial Out: serial Err: serial Net: CPU Net Initialization Failed No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
| * imx: clock: gate clk before changing pix clk muxPeng Fan2016-12-16-2/+2
| | | | | | | | | | | | | | | | | | | | | | The LCDIF Pixel clock mux is not glitchless, so need to gate before changing mux. Also change enable_lcdif_clock prototype with a new input parameter to indicate disable or enable. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
* | ARMv8: LS1043A: Enable LS1043A default PSCI supportmacro.wave.z@gmail.com2016-12-15-0/+9
| | | | | | | | | | | | | | | | | | | | A most basic PSCI implementation with only one psci_version is added for LS1043A, this can verify the generic PSCI framework, and more platform specific implementation will be added later. Signed-off-by: Hongbo Zhang <hongbo.zhang@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | fsl/board/ddr: optimize board-specific cpo for erratum A-009942Shengzhou Liu2016-12-15-0/+42
|/ | | | | | | | | | Optimize board-specific cpo for erratum A-009942 on b4860qds, ls1043aqds, ls1043ardb, ls1046aqds, ls1046ardb, ls2080ardb, t102xqds, t102xrdb, t1040qds, t104xrdb, t208xqds, t208xrdb, t4qds, t4rdb boards. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* fsl/ddr: Add erratum_a009942_check_cpo and clean related erratumShengzhou Liu2016-12-05-2/+4
| | | | | | | | | | | | | - add additional function erratum_a009942_check_cpo to check if the board needs tuning CPO calibration for optimal setting. - move ERRATUM_A009942(with revision to check cpo_sample option) from fsl_ddr_gen4.c to ctrl_regs.c for reuse on all DDR4/DDR3 parts. - move ERRATUM_A008378 from fsl_ddr_gen4.c to ctrl_regs.c - remove obsolete ERRATUM_A004934 which is replaced with ERRATUM_A009942. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com> [YS: Replaced CONFIG_QEMU_E500 with CONFIG_ARCH_QEMU_E500] Reviewed-by: York Sun <york.sun@nxp.com>
* Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2016-11-30-0/+24
|\
| * imx7: SPI: add suport for SPI flash in mikroBUS slotAngus Ainslie2016-11-29-0/+24
| | | | | | | | | | | | | | | | | | | | Enable the escpi3 nets attached to the mikroBUS slot on the i.MX7 Sabre evalution board. Also enble the SPI flash commands to work with the "flash click" board. This is V2 of this patch with changes recommended by the maintainer CC: Jagan Teki <jteki@openedev.com>
* | Merge git://git.denx.de/u-boot-mpc85xxTom Rini2016-11-29-94/+106
|\ \ | |/ |/|
| * powerpc: MPC8641HPCN: Remove macro CONFIG_MPC8641HPCNYork Sun2016-11-23-1/+1
| | | | | | | | | | | | Use TARGET_MPC8641HPCN from Kconfig instead. Signed-off-by: York Sun <york.sun@nxp.com>
| * powerpc: MPC8610HPCD: Remove macro CONFIG_MPC8610HPCDYork Sun2016-11-23-1/+1
| | | | | | | | | | | | Use TARGET_MPC8610HPCD from Kconfig instead. Signed-off-by: York Sun <york.sun@nxp.com>
| * powerpc: T4240RDB: Remove macro CONFIG_T4240RDBYork Sun2016-11-23-1/+1
| | | | | | | | | | | | Use CONFIG_TARGET_T4240RDB instead. Signed-off-by: York Sun <york.sun@nxp.com>
| * powerpc: T4160RDB: Separate from T4240RDB in KconfigYork Sun2016-11-23-1/+2
| | | | | | | | | | | | Use TARGET_T4160RDB to simplify Kconfig options. Signed-off-by: York Sun <york.sun@nxp.com>
| * powerpc: T4240QDS: Remove macro CONFIG_T4240QDSYork Sun2016-11-23-1/+1
| | | | | | | | | | | | Use CONFIG_TARGET_T4240QDS instead. Signed-off-by: York Sun <york.sun@nxp.com>
| * powerpc: T4160QDS: Separate from T4240QDS in KconfigYork Sun2016-11-23-1/+2
| | | | | | | | | | | | Use TARGET_T4160QDS to simplify Kconfig options. Signed-off-by: York Sun <york.sun@nxp.com>
| * powerpc: T2080RDB: Rename from T208XRDB in KconfigYork Sun2016-11-23-1/+1
| | | | | | | | | | | | | | T208XRDB only has one target T2080RDB. Use TARGET_T2080RDB in Kconfig and clean up existing macros. Signed-off-by: York Sun <york.sun@nxp.com>
| * powerpc: T208XQDS: Split as T2080QDS and T2081QDSYork Sun2016-11-23-1/+1
| | | | | | | | | | | | Use two separated targets in Kconfig to simplify configurations. Signed-off-by: York Sun <york.sun@nxp.com>
| * powerpc: T104xRDB: Remove macro CONFIG_T104xRDB and T104xD4RDBYork Sun2016-11-23-3/+3
| | | | | | | | | | | | | | | | CONFIG_T104xRDB is defined in T104xRDB.h, so it is always enabled for all T1040RDB, T1040D4RDB, T1042RDB, T1042D4RDB, T1042RDB_PI. CONFIG_T104XD4RDB is defined for all T1040D4RDB, T1042D4RDB. Signed-off-by: York Sun <york.sun@nxp.com>
| * powerpc: T1042RDB: Remove macro CONFIG_T1042RDBYork Sun2016-11-23-1/+1
| | | | | | | | | | | | Use TARGET_T1042RDB instead. Signed-off-by: York Sun <york.sun@nxp.com>
| * powerpc: T1042D4RDB: Separate from T1042RDB in KconfigYork Sun2016-11-23-2/+4
| | | | | | | | | | | | | | Use TARGET_T1042D4RDB in Kconfig to simplify config options. Remove macro CONFIG_T1042D4RDB. Signed-off-by: York Sun <york.sun@nxp.com>
| * powerpc: T1042RDB_PI: Split from T1042RDB in KconfigYork Sun2016-11-23-1/+1
| | | | | | | | | | | | | | Use separated TARGET_T1042RDB_PI to simplify config options. Remove macro CONFIG_T1042RDB_PI. Signed-off-by: York Sun <york.sun@nxp.com>
| * powerpc: T1040RDB: Remove macro CONFIG_T1040RDBYork Sun2016-11-23-1/+1
| | | | | | | | | | | | Use CONFIG_TARGET_T1040RDB instead. Signed-off-by: York Sun <york.sun@nxp.com>
| * powerpc: T1040D4RDB: Separate from T1040RDB in KconfigYork Sun2016-11-23-3/+3
| | | | | | | | | | | | | | Use TARGET_T1040D4RDB in Kconfig to simplify config macros. Replace CONFIG_T1040D4RDB with TARGET_T1040D4RDB and clean up existing macros. Signed-off-by: York Sun <york.sun@nxp.com>
| * powerpc: T1040: Remove macro CONFIG_PPC_T1040York Sun2016-11-23-1/+1
| | | | | | | | | | | | | | Replace CONFIG_PPC_T1040 with ARCH_T1040 in Kconfig and clean up existing macros. Signed-off-by: York Sun <york.sun@nxp.com>
| * powerpc: T104XRDB: Split to T1040RDB and T1042RDB in KconfigYork Sun2016-11-23-1/+1
| | | | | | | | | | | | | | Split ARCH_T104XRDB as ARCH_T1040RDB and ARCH_T1042RDB in Kconfig to simplify config options. Signed-off-by: York Sun <york.sun@nxp.com>
| * powerpc: T1024: Remove macro CONFIG_PPC_T1024York Sun2016-11-23-2/+2
| | | | | | | | | | | | | | Replace CONFIG_PPC_T1024 with ARCH_T1024 in Kconfig and clean up existing macros. Signed-off-by: York Sun <york.sun@nxp.com>
| * powerpc: T1024QDS: Rename Kconfig option to match the nameYork Sun2016-11-23-1/+1
| | | | | | | | | | | | Rename TARGET_T102XQDS to TARGET_T1024QDS to match the name. Signed-off-by: York Sun <york.sun@nxp.com>
| * powerpc: T102xRDB: Split as T1023RDB and T1024RDBYork Sun2016-11-23-1/+1
| | | | | | | | | | | | | | The defconfig files are separated. Splitting targets in Kconfig simplifies config options. Signed-off-by: York Sun <york.sun@nxp.com>
| * powerpc: B4420: Remove macro CONFIG_PPC_B4420York Sun2016-11-23-6/+6
| | | | | | | | | | Replace CONFIG_PPC_B4420 with ARCH_B4420 in Kconfig and clean up existing macros.
| * powerpc: B4860QDS: Remove macro CONFIG_B4860QDSYork Sun2016-11-23-1/+2
| | | | | | | | | | | | Use CONFIG_TARGET_B4860QDS instead. Signed-off-by: York Sun <york.sun@nxp.com>
| * powerpc: B4420QDS: Split from B4860QDS in KconfigYork Sun2016-11-23-1/+1
| | | | | | | | | | | | Use TARGET_B4420QDS to simplify Kconfig options. Signed-off-by: York Sun <york.sun@nxp.com>
| * powerpc: P5040DS: Remove macro CONFIG_P5040DSYork Sun2016-11-23-10/+10
| | | | | | | | | | | | Use CONFIG_TARGET_P5040DS instead. Signed-off-by: York Sun <york.sun@nxp.com>
generated by cgit v1.1 at 2024-11-07 14:26:59 +0000