| Commit message (Collapse) | Author | Age | Lines |
|
|
|
|
|
|
| |
Add NAND pinmux settings, clock setting and related configurations.
Default not enabled, need hardware rework.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
| |
Current i.MX6UL EVK boards enable the SPL u-boot. Change it to non-SPL
for default configurations. Add two other build configurations for SPL.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
| |
Enable the configurations CONFIG_MODULE_FUSE and CONFIG_OF_SYSTEM_SETUP for
module fuse check. And modify board level codes for SD, FEC and EIM.
Signed-off-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit 9232e9f7637afa3b71b43ab2d1361582ec5a080a)
|
|
|
|
|
|
|
| |
Add configurations and board codes for second enet.
Signed-off-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit 4dfd06dc649615f8dd3e1ac8018a0a7109fc4147)
|
|
|
|
|
|
|
| |
Add configurations and board codes for second enet.
Signed-off-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit b646262f1f201e11e08968ddf88aeb8ab41fcf21)
|
|
|
|
|
|
|
| |
Add LCD configurations and TFT43AB display settings for mx6sllevk.
Enable the CONFIG_VIDEO for this feature.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
| |
Add LCD configurations and MCIMX28LCD display settings for mx6sllevk.
Enable the CONFIG_VIDEO for this feature.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
| |
Change to panel environment for display at default. Align this feature to
v2015.04 uboot.
Signed-off-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit ea93a34a3348f80462ea5b61a4ca2e9a1d267f4c)
|
|
|
|
|
|
|
|
| |
Support two display panels, one for LVDS, another for parallel LCD. Align
the feature to v2015.04 uboot.
Signed-off-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit d5f7833adf6236357cf3c139e14e46d718e20524)
|
|
|
|
|
|
|
|
| |
Support two display panels, one for LVDS, another for parallel LCD. Align the
feature to the v2015.04 uboot.
Signed-off-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit d7f54f22607ffcace6cda97984649a5ae4f65996)
|
|
|
|
|
|
|
| |
Dynamic setting mmcdev and mmcroot for mx7dsabresd.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit 2fc0e6ccc90989375ac6355d4f33fd4ffaca9b3a)
|
|
|
|
|
|
|
| |
Dynamic setting mmcdev and mmcroot for mx6ul evk board.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit 95cf514bb3c17014622bca26cbcbfda31cec861a)
|
|
|
|
|
|
|
| |
Dynamic setting mmcdev and mmcroot for mx6slevk.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit 3308f3c48c644938c415ead23ed9acedc2fd7981)
|
|
|
|
|
|
|
| |
Dynamic setting mmcdev and mmcroot for mx6sxsabresd.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit ebb43ae292d43817202b71b25368516887f4686b)
|
|
|
|
|
|
|
| |
Dynamic setting mmcdev and mmcroot for mx6sxsabresd.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit fb53c90269ead4f72028fd9bcc764e4924921a30)
|
|
|
|
|
|
|
| |
Dynamic setting mmcdev and mmcroot for mx6sabresd and mx6qsabreauto.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit 14040e07549a394500c11e815f31299e4fb0ac50)
|
|
|
|
|
|
|
| |
Dynamic setting mmcdev and mmcroot for mx6qarm2.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit 54ea563dbe1804e426afbbf0710ffa815551d92b)
|
|
|
|
|
|
|
|
| |
Align to imx_v2015.04, dynamic setting mmcdev and mmcroot.
Then when boot linux, we can have correct "root=/dev/mmcblk[x]p2"
Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit b46b99a901eb194e81fc4836ee2259ad8857f4d3)
|
|
|
|
|
|
|
|
|
| |
Support epdc for mx6dlsabresd board.
Introduce a new configuration file mx6dlsabresd_epdc_defconfig.
Add related settings.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit 467974ffda4b874e16f0c84974c3d65d85f84f6a)
|
|
|
|
|
|
|
|
|
| |
Support epdc for mx6slevk board.
Introduce a new configuration file mx6slevk_epdc_defconfig.
Add related settings.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit 8e4304c2ab95928fb6fbb24ba83115cf1cd1e6d2)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Support EPDC.
E-Ink feature is supported by i.MX6DL/SL and i.MX7D.
For now this driver only supports i.MX6DL/SL, because the
i.MX7D EPDC driver needs pxp support which is not included
in U-Boot.
Support user defined logo file, if there is no logo file, it will
draw a black border around a white screen.
If need to enable EPDC, a waveform file is required to let all
work.
Since we need LCD_MONOCHROME mode for EPDC, we introduce LCD_MONOCHROME
support.
Please refer to Linux Reference Manual for how to flash WAVEFORM file.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Robby Cai <R63905@freescale.com>
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
Signed-off-by: Ye.Li <B37916@freescale.com>
(cherry picked from commit a7244f279cc3c3994bcd103f5e9a183b1075ae71)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
As the HDMI splash screen feature is not well supported,
we should not set it to be the default display. In case,
users leave the 'panel' uboot environment variable empty
and connect the board with a HDMI monitor, the HDMI detect
funtion will work and enable the HDMI splash screen. So,
this patch disables HDMI detect function so that users
may only explicitly set the 'panel' variable to be 'HDMI'
to use HDMI splash screen.
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Signed-off-by: Liu Ying <Ying.Liu@freescale.com>
Signed-off-by: Ye.Li <B37916@freescale.com>
(cherry picked from commit d482c54a9fbf458fdb2270cf990d8ec727823bb1)
(cherry picked from commit b484d36882c8db9ddb8262001cfef187a28051b2)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
-Change HDMI video mode to VGA.
-Add pixel clock fraction part setting in IPU driver,
fix video mode timing issue.
-Add overflow state clear workaround,
fix kernel hang in HDMI driver issue.
-Correct IPU clock to 264MHz.
Signed-off-by: Sandor Yu <R01008@freescale.com>
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit 5028519b434d5dfbe53c48ac4b115ff8b69bbac7)
(cherry picked from commit 8dcbd43b971616fb67dc3b2af32e2d33f68ed0ce)
|
|
|
|
|
|
|
|
|
| |
Modify and remove configurations conflicts with DM drivers from head file.
Enable DM drivers and OF_CONTROL in defconfig.
Also update the GPIO usage to call gpio_request before any gpio using, and
update power_init_board since the PMIC APIs are changed in Pfuze DM driver.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
| |
Since the DM pmic driver has changed the driver API, add a new file
pfuze_dm.c for common pfuze100 init.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In some cases this is absolutely required, so select this for some secure
features. This also requires migration of RSA_FREESCALE_EXP
Cc: Ruchika Gupta <ruchika.gupta@nxp.com>
Cc: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Cc: Naveen Burmi <NaveenBurmi@freescale.com>
Cc: Po Liu <po.liu@freescale.com>
Cc: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Cc: Priyanka Jain <Priyanka.Jain@freescale.com>
Cc: Sumit Garg <sumit.garg@nxp.com>
Cc: Shaohui Xie <Shaohui.Xie@freescale.com>
Cc: Chunhe Lan <Chunhe.Lan@freescale.com>
Cc: Feng Li <feng.li_2@nxp.com>
Cc: Alison Wang <alison.wang@freescale.com>
Cc: Mingkai Hu <Mingkai.Hu@freescale.com>
Cc: York Sun <york.sun@nxp.com>
Cc: Saksham Jain <saksham.jain@nxp.freescale.com>
Cc: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We repeated partial moves for CONFIG_SYS_NO_FLASH, but this is
not completed. Finish this work by the tool.
During this move, let's rename it to CONFIG_MTD_NOR_FLASH.
Actually, we have more instances of "#ifndef CONFIG_SYS_NO_FLASH"
than those of "#ifdef CONFIG_SYS_NO_FLASH". Flipping the logic will
make the code more readable. Besides, negative meaning symbols do
not fit in obj-$(CONFIG_...) style Makefiles.
This commit was created as follows:
[1] Edit "default n" to "default y" in the config entry in
common/Kconfig.
[2] Run "tools/moveconfig.py -y -r HEAD SYS_NO_FLASH"
[3] Rename the instances in defconfigs by the following:
find . -path './configs/*_defconfig' | xargs sed -i \
-e '/CONFIG_SYS_NO_FLASH=y/d' \
-e 's/# CONFIG_SYS_NO_FLASH is not set/CONFIG_MTD_NOR_FLASH=y/'
[4] Change the conditionals by the following:
find . -name '*.[ch]' | xargs sed -i \
-e 's/ifndef CONFIG_SYS_NO_FLASH/ifdef CONFIG_MTD_NOR_FLASH/' \
-e 's/ifdef CONFIG_SYS_NO_FLASH/ifndef CONFIG_MTD_NOR_FLASH/' \
-e 's/!defined(CONFIG_SYS_NO_FLASH)/defined(CONFIG_MTD_NOR_FLASH)/' \
-e 's/defined(CONFIG_SYS_NO_FLASH)/!defined(CONFIG_MTD_NOR_FLASH)/'
[5] Modify the following manually
- Rename the rest of instances
- Remove the description from README
- Create the new Kconfig entry in drivers/mtd/Kconfig
- Remove the old Kconfig entry from common/Kconfig
- Remove the garbage comments from include/configs/*.h
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|\
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Signed-off-by: Tom Rini <trini@konsulko.com>
Conflicts:
configs/ls1046aqds_defconfig
configs/ls1046aqds_nand_defconfig
configs/ls1046aqds_qspi_defconfig
configs/ls1046aqds_sdcard_ifc_defconfig
configs/ls1046aqds_sdcard_qspi_defconfig
configs/ls1046ardb_emmc_defconfig
configs/ls1046ardb_qspi_defconfig
configs/ls1046ardb_sdcard_defconfig
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
The PPA implements PSCI which requires for power managment.
Added support of PPA for LS1012AQDS, LS1012ARDB and LS1012AFRDM.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Abhimanyu Saini <abhimanyu.saini@nxp.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
PPA binary needs to be relocated on secure DDR, hence marking out
a portion of DDR as secure if CONFIG_SYS_MEM_RESERVE_SECURE flag
is set
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Abhimanyu Saini <abhimanyu.saini@nxp.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
|
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Set cpo_sample as suggested by the driver
"WARN: pls set popts->cpo_sample = 0x58 in <board>/ddr.c to optimize
cpo".
Signed-off-by: York Sun <york.sun@nxp.com>
CC: Shengzhou Liu <Shengzhou.Liu@nxp.com>
|
|/
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Enable MMC/I2C/GPIO/PMIC/REGULATOR/PCA953X DM drivers
for mx6sxsabreauto board. Drop non-DM code.
Note:
The i.MX DM drivers has such dependency.
MXC GPIO -> MXC I2C -> PFUZE/REGULATOR
MXC GPIO -> PCA953X
MXC GPIO -> FSL_USDHC
So the drivers needs to be enabled all to avoid
compiling error.
The uboot dm tree log:
=> dm tree
Class Probed Name
----------------------------------------
root [ + ] root_driver
thermal [ ] |-- imx_thermal
simple_bus [ + ] |-- soc
simple_bus [ + ] | |-- aips-bus@02000000
simple_bus [ ] | | |-- spba-bus@02000000
gpio [ + ] | | |-- gpio@0209c000
gpio [ + ] | | |-- gpio@020a0000
gpio [ + ] | | |-- gpio@020a4000
gpio [ + ] | | |-- gpio@020a8000
gpio [ + ] | | |-- gpio@020ac000
gpio [ + ] | | |-- gpio@020b0000
gpio [ + ] | | |-- gpio@020b4000
simple_bus [ ] | | |-- anatop@020c8000
simple_bus [ ] | | |-- snvs@020cc000
pinctrl [ + ] | | `-- iomuxc@020e0000
pinconfig [ + ] | | `-- imx6x-sabreauto
pinconfig [ + ] | | |-- i2c2grp-1
pinconfig [ + ] | | |-- i2c3grp-2
pinconfig [ ] | | |-- uart1grp
pinconfig [ + ] | | |-- usdhc3grp
pinconfig [ ] | | |-- usdhc3grp-100mhz
pinconfig [ ] | | |-- usdhc3grp-200mhz
pinconfig [ + ] | | |-- usdhc4grp
pinconfig [ + ] | | `-- vccsd3grp
simple_bus [ + ] | |-- aips-bus@02100000
mmc [ + ] | | |-- usdhc@02198000
mmc [ + ] | | |-- usdhc@0219c000
i2c [ + ] | | |-- i2c@021a4000
i2c_generic [ + ] | | | |-- generic_8
i2c_generic [ + ] | | | `-- generic_4e
i2c [ + ] | | `-- i2c@021a8000
gpio [ + ] | | |-- gpio@30
gpio [ + ] | | `-- gpio@32
simple_bus [ ] | `-- aips-bus@02200000
simple_bus [ ] | `-- spba-bus@02200000
simple_bus [ + ] `-- regulators
regulator [ + ] `-- regulator@0
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
|
|
|
|
|
|
|
| |
To avoid an unnecessary arch-specific call in board_init_f(), rename this
function.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
|
|
|
|
|
|
|
| |
Introduce board/freescale/common/Kconfig so that we have a single place
for CONFIG options that are shared between ARM and PowerPC NXP platforms.
Cc: York Sun <york.sun@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: York Sun <york.sun@nxp.com>
|
|\ |
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
On LS1012ARDB board, three dual 1:4 mux/demux devices drive the SDHC2
signals to eMMC, SDIO wifi, SPI and Ardiuno shield. Only when we select
eMMC and SDIO wifi, the SDHC2 could be used. Otherwise, the command
inhibit bits of eSDHC2_PRSSTAT register will never release. This would
cause below continious error messages in linux since it uses polling
mode to detect card.
"mmc1: Controller never released inhibit bit(s)."
"mmc1: Controller never released inhibit bit(s)."
"mmc1: Controller never released inhibit bit(s)."
This patch is to define esdhc_status_fixup function for RDB to disable
SDHC2 status if no SDIO wifi or eMMC is selected.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
The LS1012AQDS board has a hardware issue. When there is no eMMC
adapter card inserted in SDHC2 adapter slot, the command inhibit
bits of eSDHC2_PRSSTAT register will never release. This would cause
below continious error messages in linux since it uses polling mode
to detect card.
"mmc1: Controller never released inhibit bit(s)."
"mmc1: Controller never released inhibit bit(s)."
"mmc1: Controller never released inhibit bit(s)."
This patch is to define esdhc_status_fixup function for QDS to
disable SDHC2 status if no eMMC adapter card is detected.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
|
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Add the chip power supply voltage initialization on LS1046ARDB.
Add function power_init_board(), and it will initialize the
PMIC and call the chip power initialization function.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
|
| |
| |
| |
| |
| | |
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
|
| |
| |
| |
| |
| |
| | |
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: York Sun <york.sun@nxp.com>
|
|/
|
|
|
|
|
|
| |
With entry_point now being an unsigned long we need to adapt the last
two debug prints to use %lX not %X.
Fixes: 11e1479b9e67 ("SPL: make struct spl_image 64-bit safe")
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
|
|
|
|
|
|
|
|
|
| |
Add 'Peng Fan' as MAINTAINERS of configs/mx6ull_14x14_evk_plugin_defconfig
which is missing in below commit
"imx: mx6ull_14x14_evk: add plugin defconfig"
(sha1: b90ebf49bb8f74afe68f696f59a0e24cc79f2031)
Cc: Stefano Babic <sbabic@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jagan Teki <jagan@openedev.com>
|
|
|
|
|
|
|
|
| |
These two macros are used for the same thing, the total number of DDR
controllers for a given SoC. Use SYS_NUM_DDR_CTRLS in Kconfig and
merge existing usage.
Signed-off-by: York Sun <york.sun@nxp.com>
|
|
|
|
|
|
| |
Use TARGET_T2081QDS from Kconfig instead.
Signed-off-by: York Sun <york.sun@nxp.com>
|
|
|
|
|
|
| |
Use TARGET_T2080RDB from Kconfig instead.
Signed-off-by: York Sun <york.sun@nxp.com>
|
|
|
|
|
|
| |
Use TARGET_T2080QDS from Kconfig instead.
Signed-off-by: York Sun <york.sun@nxp.com>
|
|
|
|
|
|
|
|
| |
Use TARGET_T1024RDB from Kconfig instead.
Signed-off-by: York Sun <york.sun@nxp.com>
[trini: Get missing hunk in board/freescale/t102xrdb/ddr.c]
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
|
|
|
|
| |
Use TARGET_T1023RDB from Kconfig instead.
Signed-off-by: York Sun <york.sun@nxp.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
On the MX6Q the aclk_eim_slow_podf field is '1' after POR, while on the
MX6DQP it is '3'.
This makes the EIM clock to be only 66MHz on the mx6qp variant, instead of
132 MHz.
Instead of relying on the POR values for the CSMR1 register, make sure to
manually configure the clk_eim_slow_sel field as '00' so that EIM clock is
derived from AXI clock and the aclk_eim_slow_podf field as '1' so that EIM
clock can be AXI clock divided by 2.
This way a consistent EIM clock frequency is configured for all the mx6
variants.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
|
|
|
|
|
|
|
| |
add MAINTAINERS files
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
|