summaryrefslogtreecommitdiff
path: root/board/freescale
Commit message (Collapse)AuthorAgeLines
...
* Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2015-08-02-8/+856
|\
| * imx: mx6ul_14x14_evk add basic board supportPeng Fan2015-08-02-0/+663
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1. Add USDHC, I2C, UART, 74LV, USB, QSPI support. 2. Support SPL 3. CONFIG_MX6UL_14X14_EVK_EMMC_REWORK is introduced, this board default supports sd for usdhc2, but can do hardware rework to make usdhc2 support emmc. Boot Log: U-Boot SPL 2015.07-rc3-00124-g35d727b (Jul 20 2015 - 18:40:59) reading u-boot.img reading u-boot.img U-Boot 2015.07-rc3-00124-g35d727b (Jul 20 2015 - 18:40:59 +0800) CPU: Freescale i.MX6UL rev1.0 792 MHz (running at 396 MHz) CPU: Commercial temperature grade (0C to 95C)CPU: Thermal invalid data, fuse: 0x0 - invalid sensor device Reset cause: POR Board: MX6UL 14x14 EVK I2C: ready DRAM: 512 MiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: CPU Net Initialization Failed No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
| * imx: mx6qpsabreauto: Add MX6QP SABREAUTO CPU3 board supportPeng Fan2015-08-02-7/+171
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1. Add DDR script for mx6qpsabreauto board. 2. On CPU3 board, enet RGMII tx clock is from internal PLL. Set the GPR5[9] and init the enet pll output to 125Mhz. 3. On CPU3 board, SW1ABC=VDDSOC_IN, SW2=VDDARM_IN. Build target: mx6qpsabreauto_config Boot Log: U-Boot 2015.07-rc2-00071-gfd985ff (Jun 29 2015 - 22:10:55 +0800) CPU: Freescale i.MX6QP rev1.0 996 MHz (running at 792 MHz) CPU: Automotive temperature grade (-40C to 125C) at 34C Reset cause: POR Board: MX6Q-Sabreauto revA I2C: ready DRAM: 2 GiB PMIC: PFUZE100 ID=0x10 Flash: 32 MiB NAND: 0 MiB MMC: FSL_SDHC: 0 *** Warning - bad CRC, using default environment No panel detected: default to HDMI Display: HDMI (1024x768) In: serial Out: serial Err: serial Net: FEC [PRIME] Hit any key to stop autoboot: 0 Note: In this patch, we still add a new config mx6qpsabreauto_config, since SPL is not supported now, and IMX_CONFIG is needed at build time, so add this config. Future, when SPL is converted, this config can be removed. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Signed-off-by: Robin Gong <b38343@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
| * imx: mx6sabresd/sabreauto runtime setting fdt_filePeng Fan2015-08-02-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | Detect the SOC and board variant at runtime and change the dtb name, but not hardcoding the fdt_file env variable. Take the following patch as a reference. Íd58699b157df75f1aa0b363ea9c21add21a0c "mx6cuboxi: Load the correct 'fdtfile' variable" Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
| * mx6sxsabresd: Use 'int' for return valuesFabio Estevam2015-07-26-1/+2
| | | | | | | | | | | | | | | | | | | | The variable 'ret' is used to store the value returned by pfuze_mode_init(), so it should be of type 'int' instead of 'unsigned int' in order to correctly handle negative numbers. Fix the variable type. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| * mx6sabresd: Use 'int' for return valuesFabio Estevam2015-07-26-1/+2
| | | | | | | | | | | | | | | | | | | | The variable 'ret' is used to store the value returned by pfuze_mode_init(), so it should of type 'int' instead of 'unsigned int' in order to correctly handle negative numbers. Fix the variable type. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* | powerpc/T104xRDB: Remove vbank check redundant codePriyanka Jain2015-07-31-4/+1
| | | | | | | | | | | | | | | | | | sw variable in checkboard function is storing vbank value which can only take 3-bit value. So check of sw value for if greater than 7 is redundant. Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | powerpc/t1023rdb: eMMC boot without external SD cardShengzhou Liu2015-07-31-0/+24
| | | | | | | | | | | | | | | | | | eMMC has no CD and WP pins, it needs to add board-specific board_mmc_getcd() and board_mmc_getwp() in SPL to support eMMC boot without external SD card inserted. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | powerpc/t1023rdb: add support for T1023RDB RevCShengzhou Liu2015-07-31-46/+118
| | | | | | | | | | | | | | | | | | | | | | Add support for NOR flash and GPIO/I2C switch control on RevC. - NOR support - bank0/bank4 switch - SD/eMMC switch - board version Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | powerpc/mpc85xx: SECURE BOOT- NAND secure boot target for P5020 and P5040Aneesh Bansal2015-07-31-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | Secure Boot Target is added for NAND for P5020 and P5040. The Secure boot target has already been added for P3041 by enabling CONFIG_SYS_RAMBOOT and configuring CPC as SRAM. The targets for P5020 and P5040 are added in the same manner. Signed-off-by: Saksham Jain <saksham@freescale.com> Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com> Signed-off-by: Aneesh Bansal <aneesh.bansal@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | powerpc/mpc85xx: SECURE BOOT- NAND secure boot target for P3041Aneesh Bansal2015-07-31-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Secure Boot Target is added for NAND for P3041. For mpc85xx SoCs, the core begins execution from address 0xFFFFFFFC. In case of secure boot, this default address maps to Boot ROM. The Boot ROM code requires that the bootloader(U-boot) must lie in 0 to 3.5G address space i.e. 0x0 - 0xDFFFFFFF. In case of NAND Secure Boot, CONFIG_SYS_RAMBOOT is enabled and CPC is configured as SRAM. U-Boot binary will be located on SRAM configured at address 0xBFF00000. In the U-Boot code, TLB entries are created to map the virtual address 0xFFF00000 to physical address 0xBFF00000 of CPC configured as SRAM. Signed-off-by: Saksham Jain <saksham@freescale.com> Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com> Signed-off-by: Aneesh Bansal <aneesh.bansal@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | powerpc/t104x, t102x: Update CPC debug register value in PBI commandsPriyanka Jain2015-07-28-4/+4
| | | | | | | | | | | | | | | | | | Update PBI command in pbi_cfg files to keep register bit to default reset value while configuring CPC as SRAM Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | powerpc/t4rdb: fix cpld reset altbankShaohui Xie2015-07-28-7/+1
| | | | | | | | | | | | | | | | cpld reset altbank should always reset to bank4 no matter what current bank is. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | powerpc/p2020rdb: fix the FDT_ERR_NOTFOUND issueYing Zhang2015-07-28-4/+11
| | | | | | | | | | | | | | | | | | | | | | Because the function ft_board_setup() delete the USB2 device node, it leads to can't find the device node and hung up. In fact only P1020RDB needs to delete the USB2 node, this patch fixes this issue. Signed-off-by: Ying Zhang <b40530@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | powerpc/T104xD4: Add Secure boot support for T104xD4RDB platformsgaurav rana2015-07-28-0/+2
| | | | | | | | | | | | | | | | defconfig files are added and SFP version for these platforms is updated. Signed-off-by: Gaurav Rana <gaurav.rana@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | powerpc/T104xD4RDB: Add T104xD4RDB boards supportPriyanka Jain2015-07-28-6/+184
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | T1040D4RDB is a Freescale reference board that hosts the T1040 SoC. T1040D4RDB is re-designed T1040RDB board with following changes : - Support of DDR4 memory - Support of 0x66 serdes protocol which can support following interfaces - 2 RGMII's on DTSEC4, DTSEC5 - 1 SGMII on DTSEC3 - Support of QE-TDM Similarily T1042D4RDB is a Freescale reference board that hosts the T1040 SoC. T1042D4RDB is re-designed T1042RDB board with following changes : - Support of DDR4 memory - Support for 0x86 serdes protocol which can support following interfaces - 2 RGMII's on DTSEC4, DTSEC5 - 3 SGMII on DTSEC1, DTSEC2 & DTSEC3 - Support of DIU Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com> Signed-off-by: Wang Dongsheng <dongsheng.wang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | armv8/ls2085ardb: DSPI pin muxing configure through QIXIS CPLDHaikun.Wang@freescale.com2015-07-20-20/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | DSPI has pin muxing with SDHC and other IPs, this patch check the value of RCW SPI_PCS_BASE and SPI_BASE_BASE fields, it also check the "hwconfig" variable. If those pins are configured to DSPI and "hwconfig" enable DSPI, set the BRDCFG5 of QIXIS CPLD to configure the routing to on-board SPI memory. Otherwise will configure to SDHC. DSPI is enabled in "hwconfig" by appending "dspi", eg. setenv hwconfig "$hwconfig;dspi" Signed-off-by: Haikun Wang <Haikun.Wang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | armv8/ls2085aqds: DSPI pin muxing configure through QIXISHaikun Wang2015-07-20-0/+48
| | | | | | | | | | | | | | | | | | | | | | | | | | DSPI has pin muxing with SDHC and other IPs, this patch check the value of RCW SPI_PCS_BASE and SPI_BASE_BASE fields, it also check the "hwconfig" variable. If those pins are configured to DSPI and "hwconfig" enable DSPI, set the BRDCFG5 of QIXIS FPGA to configure the routing to on-board SPI memory. Otherwise will configure to SDHC. DSPI is enabled in "hwconfig" by appending "dspi", eg. setenv hwconfig "$hwconfig;dspi" Signed-off-by: Haikun Wang <haikun.wang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | arm/ls102xa: Add little-endian mode support for audio IPsAlison Wang2015-07-20-0/+6
| | | | | | | | | | | | | | | | As SCFG_ENDIANCR register is added to choose little-endian or big-endian for audio IPs on Rev2.0 silion, little-endian mode is selected. Signed-off-by: Alison Wang <alison.wang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | board/ls2085rdb: Export functions for standalone AQ FW load appsPrabhakar Kushwaha2015-07-20-0/+15
| | | | | | | | | | | | | | | | | | Export functions required by Aquntia PHY firmware load application. functions are memset, strcpy, mdelay, mdio_get_current_dev, phy_find_by_mask, mdio_phydev_for_ethname and miiphy_set_current_dev Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | armv8/fsl-lsch3: Support 256M mem split for MC & dbg-srvrPrabhakar Kushwaha2015-07-20-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | The agreed split of the top of memory is 256M for debug server and 256M for MC. This patch implements the split. In addition, the MC mem must be 512MB aligned, so the amount of memory to hide must be 512MB to achieve that alignment. Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | armv8/ls2085a: Expose all DDR region(s) to LinuxBhupesh Sharma2015-07-20-18/+68
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch allows u-boot to expose the complete DDR region(s) to Linux (after subtracting the memory hidden via MEM_TOP_HIDE mechanism). This allows the u-boot to support the 48-bit VA support provided by ARM64 Linux in flavors 3.18 and above, by passing the appropriate 'memory' DTS nodes. Signed-off-by: Bhupesh Sharma <bhupesh.sharma at freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | armv8/ls2085ardb: Fix SPD address error on early boardsYork Sun2015-07-20-0/+19
| | | | | | | | | | | | | | | | | | Board rev C and earlier has duplicated SPD address on 2nd DDR controller slots. It is fixed on rev D and later. SPD addresses need to be updated accordingly. Signed-off-by: York Sun <yorksun at freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com>
* | armv8/ls2085a: Avoid hard-coding for board name printPrabhakar Kushwaha2015-07-20-2/+9
| | | | | | | | | | | | | | | | | | | | | | LS2085A supports 6 personalities i.e. LS2045AE, LS2045A, LS2080AE, LS2080A, LS2085AE and LS2085A personlities. Instead of hard-coding, board name should change as per selected personality. Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | armv8/ls2085RDB: Update board version print logicPrabhakar Kushwaha2015-07-20-1/+1
| | | | | | | | | | | | | | | | | | | | As per updated board document, no need to substract 1 from arch[BRD] bit field. Default value + 'A' represents the board revision. So update board version print logic to reflect the same. Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | board/fsl/common: Fix eeprom system version endiannessJaiprakash Singh2015-07-20-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | SYSTEM ID EPPROM always store SYSTEM version info in big endian format. SoC with ARM or PowerPC core should read/write version info from eeprom in BIG endian format. So use cpu-specific APIs to read SYSTEM version. Signed-off-by: Jaiprakash Singh <b44839 at freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | armv8/ls2085qds: Update SFP TX bit as "0" to enable XFIPrabhakar Kushwaha2015-07-20-1/+1
| | | | | | | | | | | | | | | | FPGA BRDCFG9[SFP_TX] should be clear in order to enable XFI ports. Signed-off-by: Dai Haruki <Dai.Haruki at freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | armv8/ls2085aqds: Add support of SerDes protocol 0x49Prabhakar Kushwaha2015-07-20-0/+2
| | | | | | | | | | | | | | | | | | | | SerDes Protocol 0x49 enables 4 SGMII, PEX4, SATA1 and SATA2. Add support of 0x49 SerDes protocol to enable 4SGMII on slot4 of ls2085aqds platform. Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | armv8/ls2085ardb: add hwconfig setting for eSDHCYangbo Lu2015-07-20-0/+36
| | | | | | | | | | | | | | | | | | Add hwconfig setting for eSDHC since it shares some pins with other IP block. Signed-off-by: Yangbo Lu <yangbo.lu at freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | armv8/ls2085ardb: Add eth & phy firmware loading supportPrabhakar Kushwaha2015-07-20-14/+134
|/ | | | | | | | | | Add support for board eth initialization and support for loading phy firmware. PHY firmware needs to be loaded from board_eth_init() because all the MACs are not initialized by ldpaa_eth driver. Signed-off-by: pankaj chauhan <pankaj.chauhan at freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2015-05-26-2/+2
|\
| * pmic: pfuze100 fix typoPeng Fan2015-05-19-2/+2
| | | | | | | | | | | | Change PUZE_100_SW1ABCONF to PFUZE100_SW1ABCONF Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* | arm/ls1021a: Remove ccsr_ddr from immap_ls102xa.hYork Sun2015-05-20-0/+1
|/ | | | | | | | | ccsr_ddr structure is already defined in fsl_immap.h. Remove this duplicated define. Move fixed timing into ls1021atwr.h. Signed-off-by: York Sun <yorksun@freescale.com> CC: Alison Wang <alison.wang@freescale.com> Acked-by: Alison Wang <alison.wang@freescale.com>
* ARM: Clean up CONFIG_ARMV7_NONSEC/VIRT/PSCI conditionsJan Kiszka2015-05-13-1/+1
| | | | | | | | | | | | | | CONFIG_ARMV7_VIRT depends on CONFIG_ARMV7_NONSEC, thus doesn't need to be taken into account additionally. CONFIG_ARMV7_PSCI is only set on boards that support CONFIG_ARMV7_NONSEC, and it only works on those. CC: Tang Yuantian <Yuantian.Tang@freescale.com> CC: York Sun <yorksun@freescale.com> CC: Steve Rae <srae@broadcom.com> CC: Andre Przywara <andre.przywara@linaro.org> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Tested-by: Alison Wang <alison.wang@freescale.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* powerpc/t4240qds: Update RCW, defconfig and maintainerShaohui Xie2015-05-04-4/+2
| | | | | | | | | | | | | | | | | 1. board/freescale/t4qds/t4_rcw.cfg 1.8GHz support is requested as default frequency, so update the rcw. 2. remove un-used configs configs/T4160QDS_SPIFLASH_defconfig configs/T4240QDS_SPIFLASH_defconfig SPI boot is not available on T4QDS, so the configs should be removed. 3. board/freescale/t4qds/MAINTAINERS Updated MAINTAINERS accordingly. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> [York Sun: revise subject] Reviewed-by: York Sun <yorksun@freescale.com>
* t2080rdb/rcw: update ddr frequency from 1600MT/s to 1867MT/sShengzhou Liu2015-05-04-1/+4
| | | | | | | | | T2080RDB RevC uses new SODIMM 1867MT/s instead of previous 1600MT/s. So update RCW to support new DDR frequency 1867MT/s by default. Reserve the old 1600MT/s in comment for users in needed. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* mmc: fsl_esdhc: Add adapter card type identification supportYangbo Lu2015-05-04-0/+14
| | | | | | | | | | | | Add adapter card type identification support by reading FPGA STAT_PRES1 register SDHC Card ID[0:2] bits. To use this function, define CONFIG_FSL_ESDHC_ADAPTER_IDENT. Signed-off-by: Yangbo Lu <yangbo.lu@freescale.com> Cc: York Sun <yorksun@freescale.com> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> [York Sun: resolve conflicts in README.fsl-esdhc] Reviewed-by: York Sun <yorksun@freescale.com>
* board/t2080rdb: reset cs4315 phyShengzhou Liu2015-05-04-0/+10
| | | | | | | | CS4315 PHY doesn't support phy-reset by software, it needs to reset it by hardware via CPLD control. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* fsl/deepsleep: avoid the DDR restore from being optimized outTang Yuantian2015-05-04-4/+4
| | | | | | | | | | | Function dp_ddr_restore is to restore the first 128-byte space of DDR. However those codes may be optimized out by compiler since the destination address is at 0x0. In order to avoid compiler optimization, we restore the space from high address, which is not at 0x0, to low address. Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* board/t102x: use fdt_setprop_string instead of fdt_setpropShengzhou Liu2015-05-04-6/+7
| | | | | | | Use fdt_setprop_string instead of fdt_setprop to fix string length. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc/t1023rdb: Add T1023 RDB board supportShengzhou Liu2015-05-04-28/+286
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | T1023RDB is a Freescale Reference Design Board that hosts the T1023 SoC. T1023RDB board Overview ----------------------- - T1023 SoC integrating two 64-bit e5500 cores up to 1.4GHz - CoreNet fabric supporting coherent and noncoherent transactions with prioritization and bandwidth allocation - Memory: 2GB Micron MT40A512M8HX unbuffered 32-bit fixed DDR4 without ECC - Accelerator: DPAA components consist of FMan, BMan, QMan, DCE and SEC - Ethernet interfaces: - one 1G RGMII port on-board(RTL8211F PHY) - one 1G SGMII port on-board(RTL8211F PHY) - one 2.5G SGMII port on-board(AQR105 PHY) - PCIe: Two Mini-PCIe connectors on-board. - SerDes: 4 lanes up to 10.3125GHz - NOR: 128MB S29GL01GS110TFIV10 Spansion NOR Flash - NAND: 512MB S34MS04G200BFI000 Spansion NAND Flash - eSPI: 64MB S25FL512SAGMFI010 Spansion SPI flash. - USB: one Type-A USB 2.0 port with internal PHY - eSDHC: support SD/MMC card and eMMC on-board - 256Kbit M24256 I2C EEPROM - RTC: Real-time clock DS1339 on I2C bus - UART: one serial port on-board with RJ45 connector - Debugging: JTAG/COP for T1023 debugging As well updated T1024RDB to add T1023RDB. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> [York Sun: fix defconfig files] Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc/t4rdb: Add SD boot support for T4240RDB boardChunhe Lan2015-05-04-8/+117
| | | | | | | | | | | | This patch adds SD boot support for T4240RDB board. SPL framework is used. PBL initializes the internal RAM and copies SPL to it. Then SPL initializes DDR using SPD and copies u-boot from SD card to DDR, finally SPL transfers control to u-boot. Signed-off-by: Chunhe Lan <Chunhe.Lan@freescale.com> [York Sun: Fix T4240RDB_SDCARD_defcofig] Reviewed-by: York Sun <yorksun@freescale.com>
* mpc85xx/T4240EMU: Remove T4240EMU boardYork Sun2015-05-04-46/+0
| | | | | | | T4240 SoC has been available for a long time. Emulator support is no longer needed. Signed-off-by: York Sun <yorksun@freescale.com>
* Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2015-04-28-10/+6
|\
| * mx6sabresd: Remove uneeded ifdefFabio Estevam2015-04-22-4/+0
| | | | | | | | | | | | RTT_NOM_120OHM is not defined, so remove its ifdef. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| * mx6sabresd: Fix SPL memory descriptionFabio Estevam2015-04-22-4/+5
| | | | | | | | | | | | | | mx6sabresd has four MT41K128M16JT-125 chips. Each memory has 16-bit bus and 2GiB, so fix the width and density fields accordingly. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| * iMX: Fix compilation error when enabling SECURE_BOOTgaurav rana2015-04-22-2/+1
| | | | | | | | | | | | | | | | | | Move the compilation of file fsl_validate.c in MACRO CONFIG_CMD_ESBC_VALIDATE. This file should be compiled only when the above MACRO is defined This caused a break in compilation of iMX platforms when compiling for SECURE_BOOT Signed-off-by: Gaurav Rana <gaurav.rana@freescale.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriqTom Rini2015-04-24-70/+2067
|\ \
| * | armv8/ls2085ardb: Enable NAND SPL supportScott Wood2015-04-23-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable NAND boot support using SPL framework. To boot from NAND, either use DIP switches on board, or "qixis_reset nand" command. Details of forming NAND image can be found in README. Signed-off-by: Scott Wood <scottwood@freescale.com> [York Sun: Remove +S from defconfig after commit 252ed872] Signed-off-by: York Sun <yorksun@freescale.com>
| * | freescale/qixis: Add support for booting from NANDScott Wood2015-04-23-10/+21
| | | | | | | | | | | | | | | | | | | | | Use "qixis_reset nand" to reset the board to boot from NAND. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: York Sun <yorksun@freescale.com>
generated by cgit v1.1 at 2024-11-10 23:59:58 +0000