summaryrefslogtreecommitdiff
path: root/board/freescale
Commit message (Collapse)AuthorAgeLines
* mpc83xx: Add the support of MPC837xEMDS boardDave Liu2008-01-08-0/+287
| | | | | | | | | | | The MPC837xEMDS board support: * DDR2 400MHz hardcoded and SPD init * Local bus NOR Flash * I2C, UART, MII and RTC * eTSEC RGMII * PCI host Signed-off-by: Dave Liu <daveliu@freescale.com>
* MPC8360E-MDS: configure and enable second UARTAnton Vorontsov2008-01-08-0/+8
| | | | | | | Despite user manual, BCSR9.7 is negated (high) on HRST, so UART2 is disabled. Fix that and configure QE pins properly. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
* 8610: Move include of config.h earlier.Jon Loeliger2008-01-03-1/+1
| | | | | | | | Include config.h earlier in the set of #includes so as to avoid a incidental and duplicate definition of CFG_CACHELINE_SIZE. Signed-off-by: Jon Loeliger
* Convert MPC8641HPCN to use libfdt.Jon Loeliger2008-01-03-26/+34
| | | | | | | | | Assumes the presence of the aliases node in the DTS to locate the ethernet, pci and serial nodes for fixups. Use consistent fdtaddr and fdtfile in environment variables. Signed-off-by: Jon Loeliger <jdl@freescale.com>
* Merge commit 'wd/master'Jon Loeliger2008-01-03-61/+6751
|\
| * Move the MPC8541/MPC8555/MPC8548 CDS board under board/freescale.Kumar Gala2007-12-11-0/+3567
| | | | | | | | | | | | Minor path corrections needed to ensure buildability. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * Move the MPC8540 ADS board under board/freescale.Kumar Gala2007-12-11-0/+863
| | | | | | | | | | | | Minor path corrections needed to ensure buildability. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * Move the MPC8560 ADS board under board/freescale.Kumar Gala2007-12-11-0/+1083
| | | | | | | | | | | | Minor path corrections needed to ensure buildability. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * Move the MPC8568 MDS board under board/freescale.Kumar Gala2007-12-11-0/+1193
| | | | | | | | | | | | Minor path corrections needed to ensure buildability. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * Use standard LAWAR_TRGT_IF_* defines for LAW setup on 85xxKumar Gala2007-12-11-16/+9
| | | | | | | | | | | | | | | | We already had defines for LAWAR_TRGT_IF_* that we should use rather than creating new ones. Also, added some missing defines for PCIE targets. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * Stop using immap_t on 85xxKumar Gala2007-12-11-3/+2
| | | | | | | | | | | | | | | | In the future the offsets to various blocks may not be in same location. Move to using CFG_MPC85xx_*_ADDR as the base of the registers instead of getting it via &immap. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * Stop using immap_t for guts offset on 85xxKumar Gala2007-12-11-3/+2
| | | | | | | | | | | | | | | | In the future the offsets to various blocks may not be in same location. Move to using CFG_MPC85xx_GUTS_ADDR as the base of the guts registers instead of getting it via &immap->im_gur. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * Update MPC8544DS to use libfdtKumar Gala2007-12-11-39/+32
| | | | | | | | | | | | | | Updated the MPC8544DS config to use libfdt and assume use of aliases for ethernet, pci, and serial for the various fixups that are done. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | Merge commit 'wd/master'Jon Loeliger2007-12-06-6/+6
|\ \ | |/
| * Update libfdt from device tree compiler (dtc)Kumar Gala2007-11-21-6/+6
| | | | | | | | | | | | | | Update libfdt to commit 8eaf5e358366017aa2e846c5038d1aa19958314e from the device tree compiler (dtc) project. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | Move 8610 DIU interface structure definitions to header file.Jon Loeliger2007-11-20-32/+34
| | | | | | | | | | | | | | | | | | | | These two structures are still needed during the initialization and setup of the DIU hardware. So move them to the fsl_diu_fb.h file for now. Official "blah". Noticed-by: York Sun <yorksun@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com>
* | Merge commit 'remotes/wd/master'Jon Loeliger2007-11-20-1/+286
|\ \ | |/
| * Fix compiler warnings for PPC systems. Update CHANGELOG.Wolfgang Denk2007-11-18-1/+1
| | | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
| * Merge branch 'master' of git://www.denx.de/git/u-boot-coldfireWolfgang Denk2007-11-17-0/+285
| |\
| | * ColdFire: MCF5445x - Update correct RAMBAR and missing linker filesTsiChungLiew2007-11-07-0/+285
| | | | | | | | | | | | Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
| * | Unify pixis_reset altbank across board familiesJason Jin2007-11-17-1/+4
| |/ | | | | | | | | | | | | | | Basically, refactor the CFG_PIXIS_VBOOT_MASK values into the separate board config files. Signed-off-by: Jason Jin <Jason.jin@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com>
* | Merge branch 'mpc8610'Jon Loeliger2007-11-07-5/+1794
|\ \
| * | 8610: Add console frame buffer support to FSL 8610 DIU driver.York Sun2007-11-07-3/+75
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add cfb console support to FSL 8610 DIU driver. Inspect board version from PIXIS to obtain correct pixel format. Use #define CONFIG_VIDEO in config file to enable fb console. To switch monitor, set monitor variable to 0 - DVI, 1 - Single link LVDS, 2 - Double link LVDS followed by "diufb init". Preserve logo bitmap at the top of the fb console. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com>
| * | 8610: Add 8610 DIU display driverYork Sun2007-11-07-5/+844
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1280x1024 and 1024x768 @ 32 bpp are supported now. DVI, Single-link LVDS, Double-link LVDS are all supported. Environmental variable "monitor" is used to specify monitor port. A new command "diufb" is introduced to reinitialize monitor and display a BMP file in the memory. So far, 1-bit, 4-bit, 8-bit and 24-bit BMP formats are supported. diufb init - initialize the diu driver Enable the port specified in the environmental variable "monitor" diufb addr - display bmp file in memory. The bmp image should be no bigger than the resolution, 1280x1024 for DVI and double-link LVDS, 1024x768 for single-link LVDS. Note, this driver allocate memory but doesn't free it after use It is written on purpose -- to avoid a failure of reallocation due to memory fragement. ECC of DDR is disabled for DIU performance. L2 data cache is also disabled. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Jon loeliger <jdl@freescale.com>
| * | FSL: Add a freescale bitmap logo.York Sun2007-11-07-0/+878
| | | | | | | | | | | | | | | | | | | | | | | | This Freescale logo is a 340 x 128 x 4bpp BMP file that can be displayed by the DIU Framebuffer driver. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com>
* | | Unify pixis_reset altbank across board familiesJason Jin2007-11-07-1/+4
|/ / | | | | | | | | | | | | | | Basically, refactor the CFG_PIXIS_VBOOT_MASK values into the separate board config files. Signed-off-by: Jason Jin <Jason.jin@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com>
* | Merge commit 'remotes/wd/master'Jon Loeliger2007-11-02-14/+16
|\ \ | |/
| * ColdFire 54455: Fix correct boot location for atmel and intelTsiChungLiew2007-10-25-1/+3
| | | | | | | | Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
| * mpc83xx: pq-mds-pib.c typo errorTony Li2007-10-18-13/+13
| | | | | | | | | | | | | | Correct to val8 from val. Signed-off-by: Tony Li <tony.li@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* | Initial mpc8610hpcd board files.Jon Loeliger2007-10-17-0/+871
|/ | | | | | | Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com> Signed-off-by: Jason Jin <Jason.jin@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com>
* ColdFire: fix build error becasue of bad type of mii_init()Liew Tsi Chung-r5aahp2007-09-15-3/+3
| | | | Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
* ColdFire: Fix build error caused by pixis.cLiew Tsi Chung-r5aahp2007-09-15-2/+1
| | | | | | Moved the #include <asm/cache.h> inside the #ifdef CONFIG_FSL_PIXIS. Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
* Fix cases where DECLARE_GLOBAL_DATA_PTR was not declared as globalWolfgang Denk2007-09-15-1/+2
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* Fix ULI RTC support on MPC8544 DSKumar Gala2007-09-04-1/+7
| | | | | | | | | | | The RTC on the M1575 ULI chipset requires a dummy read before we are able to talk to the RTC. We accomplish this by adding a second memory region to the PHB the ULI is on and read from it. The second region is added to maintain compatiabilty with Linux's view of the PCI memory map. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ft_board_setup update 85xx/86xx of pci/pcie bus-range property.Ed Swarthout2007-09-04-3/+27
| | | | | | pcie is now differentiated from pci. Add 8641 bus-range updates. Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
* support board vendor-common makefilesKim Phillips2007-08-29-15/+66
| | | | | | | | | | | | | | | | | | if a board/$(VENDOR)/common/Makefile exists, build it. also add the first such case, board/freescale/common/Makefile, to handle building board-shared EEPROM, PIXIS, and MDS-PIB code, as dictated by board configuration. thusly get rid of alternate build dir errors such as: FATAL: can't create /work/wd/tmp/u-boot-ppc/board/freescale/mpc8360emds/../common/pq-mds-pib.o: No such file or directory by putting the common/ mkdir command in its proper place (the common Makefile). Common bits from existing individual board Makefiles have been removed. Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* Merge with /home/wd/git/u-boot/custodian/u-boot-coldfireWolfgang Denk2007-08-18-0/+4004
|\
| * Coding style cleanupStefan Roese2007-08-18-3/+0
| | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de>
| * ColdFire: Add M5235EVB Platform for MCF523xTsiChungLiew2007-08-17-0/+939
| | | | | | | | Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
| * ColdFire: Add M54455EVB for MCF5445xTsiChungLiew2007-08-16-0/+1672
| | | | | | | | Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
| * ColdFire: Add M5253EVBE platform for MCF52x2TsiChungLiew2007-08-16-0/+346
| | | | | | | | Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
| * ColdFire: Add M5249EVB platform for MCF52x2TsiChungLiew2007-08-16-0/+329
| | | | | | | | Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
| * ColdFire: MCF5329 Update and cleanupTsiChungLiew2007-08-16-5/+5
| | | | | | | | Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
| * Merge branch 'denx-coldfire' into coldfire-aug2007John Rigby2007-08-16-0/+721
| |\
| | * Merge with git://www.denx.de/git/u-boot.gitStefan Roese2007-08-15-10/+655
| | |\
| | * | Coding style cleanupStefan Roese2007-08-08-53/+51
| | | | | | | | | | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de>
| | * | Added NAND supportTsiChungLiew2007-08-08-1/+116
| | | | | | | | | | | | | | | | Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
| | * | Moved sync() from board file to include/asm-m68k/io.hTsiChungLiew2007-08-08-7/+0
| | | | | | | | | | | | | | | | Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
| | * | Declared attributes of void __mii_init(void) as an alias for int mii_init(void)TsiChungLiew2007-08-08-1/+3
| | | | | | | | | | | | | | | | Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
| | * | Coding style cleanupStefan Roese2007-07-16-1/+0
| | | | | | | | | | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de>
generated by cgit v1.1 at 2024-12-04 02:36:13 +0000