summaryrefslogtreecommitdiff
path: root/board/freescale/p1_p2_rdb
Commit message (Collapse)AuthorAgeLines
* powerpc/85xx: Add support for 2nd USB controller on p1_p2_rdbRamneek Mehresh2011-04-27-0/+14
| | | | | | Second USB controller only works for SPI and SD boot because of pin muxing Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
* tsec: Convert tsec to use PHY LibAndy Fleming2011-04-20-0/+6
| | | | | | | | | | | | | This converts tsec to use the new PHY Lib. All of the old PHY support is ripped out. The old MDIO driver is split off, and placed in fsl_mdio.c. The initialization is modified to initialize the MDIO driver as well. The powerpc config file is modified to configure PHYLIB if TSEC_ENET is configured. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Detlev Zundel <dzu@denx.de>
* powerpc/85xx: Add 36-bit physical addressing support for P1_P2_RDBPoonam Aggrwal2011-04-04-4/+8
| | | | | | | | Add support for 36-bit address map for NOR, SD, and SPI boot cfgs. Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Priyanka Jain <priyanka.jain@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: Optimized DDR settings for 800MT/s on P1/P2 RDBPoonam Aggrwal2011-04-04-2/+2
| | | | | | | | | | | | Changed the following DDR timing parameters for 800Mt/s: tRRT BL/2+1 to BL/2 tWWT BL/2+1 to BL/2 tWRT BL/2+1 to BL/2 tRWT BL/2+1 to BL/2 REFINT 6500ns to 7800ns Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: Removed P1/P2 RDB RevB supportPoonam Aggrwal2011-04-04-22/+7
| | | | | | | | RevB boards never really made it outside of Freescale and have been replaced with RevC & RevD which had various board bug fixes. Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: Read board switch settings on p1_p2_rdbPriyanka Jain2011-04-04-0/+25
| | | | | | | | | | | | | | | | | | | | | PCA9557 is parallel I/O expansion device on I2C bus which stores various board switch settings like NOR Flash-Bank selection, SD Data width. On board: switch SW5[6] is to select width for eSDHC ON - 4-bit [Enable eSPI] OFF - 8-bit [Disable eSPI] switch SW4[8] is to select NOR Flash Bank for Booting OFF - Primary Bank ON - Secondary Bank Read board switch settings on p1_p2_rdb and configure corresponding eSDHC width. Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com> Signed-off-by: Dipen Dudhat <dipen.dudhat@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: Use DDR for RAMBOOT instead of L2 SRAM on p1_p2_rdbPriyanka Jain2011-04-04-13/+15
| | | | | | | | | | | | | | | | | | Using DDR as RAMBOOT base instead of L2SRAM for SDCard and SPI Flash boot loaders because: - P1_P2_RDB boards have soldered DDR so no need for SPD - Also P102x has 256K L2 cache size so becomes a limiting factor for size of image that could be loaded in SRAM mode and would require three stage boot loader (TPL). Changes done: 1. CONFIG_SYS_TEXT_BASE to 0x11000000 2. CONFIG_RESET_VECTOR_ADDRESS to 0x1107fffc Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com> Signed-off-by: Poonam Aggrwal <Poonam.Aggrwal@freescale.com> Signed-off-by: Dipen Dudhat <Dipen.Dudhat@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: Remove config.mk for nand linker scriptKumar Gala2011-04-04-31/+0
| | | | | | | Move the include of mpc85xx/u-boot-nand.lds to utilize CONFIG_SYS_LDSCRIPT rather than having an explicit config.mk Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc: Move cpu specific lmb reserve to arch_lmb_reserveKumar Gala2011-04-04-9/+0
| | | | | | | | We've been utilizing board_lmb_reserve to reserve the boot page for MP systems. We can just move this into arch_lmb_reserve for 85xx & 86xx systems rather than duplicating in each board port. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: Declare fsl_ddr_set_memctl_regs in <asm/fsl_ddr_sdram.h>Kumar Gala2011-04-04-3/+0
| | | | | | | | | Remove declerations of fsl_ddr_set_memctl_regs in board files with and place it into a common header. Based on patch from Poonam Aggrwal. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: Remove DATARATE_*_MHZ defines in static ddr initKumar Gala2011-04-04-14/+11
| | | | | | | | | | Rather than having #defines DATARATE_*_MHZ, lets just match what we do on the SPD code and convert the DDR frequency into MHZ and just compare with a constant. Based on patch from Poonam Aggrwal. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: Fix PCI memory map setup on P1_P2_RDBPrabhakar Kushwaha2011-03-24-2/+2
| | | | | | | | | Update the PCIe address map to match standard FSL memory map. Additionally, fix the TLBs so the cover the PCIe address space properly so cards plugged in like an e1000 work correctly. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/85xx: Fix compile err when PCI disabled on P1_P2_RDBPrabhakar Kushwaha2011-01-19-2/+6
| | | | | | | | | u-boot cannot be compiled after disabling CONFIG_PCI. Place PCI related codes under #ifdef CONFIG_PCI Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: Move RESET_VECTOR_ADDRESS into config.hKumar Gala2011-01-19-13/+1
| | | | | | | | | | | Rather than defining it config.mk we can set it in config.h and remove config.mk from several boards that don't need it. We mimic what 4xx does and introduce CONFIG_RESET_VECTOR_ADDRESS for config.h to set. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
* powerpc/85xx: Rework P1_P2_RDB pci_init_board to use common FSL PCIe codeKumar Gala2011-01-14-62/+2
| | | | | | | | Remove duplicated code in P1_P2_RDB boards and utilize the common fsl_pcie_init_board(). We also now dynamically setup the LAWs for PCI controllers based on which PCIe controllers are enabled. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* mpc85xx boards: initdram() cleanup/bugfixBecky Bruce2011-01-14-14/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Correct initdram to use phys_size_t to represent the size of dram; instead of changing this all over the place, and correcting all the other random errors I've noticed, create a common initdram that is used by all non-corenet 85xx parts. Most of the initdram() functions were identical, with 2 common differences: 1) DDR tlbs for the fixed_sdram case were set up in initdram() on some boards, and were part of the tlb_table on others. I have changed them all over to the initdram() method - we shouldn't be accessing dram before this point so they don't need to be done sooner, and this seems cleaner. 2) Parts that require the DDR11 erratum workaround had different implementations - I have adopted the version from the Freescale errata document. It also looks like some of the versions were buggy, and, depending on timing, could have resulted in the DDR controller being disabled. This seems bad. The xpedite boards had a common/fsl_8xxx_ddr.c; with this change only the 517 board uses this so I have moved the ddr code into that board's directory in xpedite517x.c Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org> Tested-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: Cleanup SGMII detection and reportingKumar Gala2011-01-14-7/+4
| | | | | | | | Use new is_serdes_configured to determine if TSECs are in SGMII mode and report that on the various boards that use or can be configured in SGMII mode in board_eth_init() instead of in the PCI init code. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/8xxx: Replace is_fsl_pci_cfg with is_serdes_configuredKumar Gala2011-01-14-6/+4
| | | | | | | Now that we have serdes support for all 85xx/86xx/Pxxx chips we can replace the is_fsl_pci_cfg() code with the is_serdes_configured(). Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Switch from archive libraries to partial linkingSebastien Carlier2010-11-17-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Before this commit, weak symbols were not overridden by non-weak symbols found in archive libraries when linking with recent versions of binutils. As stated in the System V ABI, "the link editor does not extract archive members to resolve undefined weak symbols". This commit changes all Makefiles to use partial linking (ld -r) instead of creating library archives, which forces all symbols to participate in linking, allowing non-weak symbols to override weak symbols as intended. This approach is also used by Linux, from which the gmake function cmd_link_o_target (defined in config.mk and used in all Makefiles) is inspired. The name of each former library archive is preserved except for extensions which change from ".a" to ".o". This commit updates references accordingly where needed, in particular in some linker scripts. This commit reveals board configurations that exclude some features but include source files that depend these disabled features in the build, resulting in undefined symbols. Known such cases include: - disabling CMD_NET but not CMD_NFS; - enabling CONFIG_OF_LIBFDT but not CONFIG_QE. Signed-off-by: Sebastien Carlier <sebastien.carlier@gmail.com>
* mpc85xx: Fix SERDES/eTSEC message indentationPeter Tyser2010-11-14-1/+1
| | | | | | | | | | | | | Previously some mpc85xx boards printed indented messages such as the following on bootup: printf(" eTSEC4 is in sgmii mode.\n"); printf(" Serdes2 disalbed\n"); The bootup appearance looks cleaner if the indentation is removed which aligns these messages with other bootup output. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> CC: galak@kernel.crashing.org
* fsl: Clean up printing of PCI boot infoPeter Tyser2010-11-14-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Previously boards used a variety of indentations, newline styles, and colon styles for the PCI information that is printed on bootup. This patch unifies the style to look like: ... NAND: 1024 MiB PCIE1: connected as Root Complex Scanning PCI bus 01 04 01 8086 1010 0200 00 04 01 8086 1010 0200 00 03 00 10b5 8112 0604 00 02 01 10b5 8518 0604 00 02 02 10b5 8518 0604 00 08 00 1957 0040 0b20 00 07 00 10b5 8518 0604 00 09 00 10b5 8112 0604 00 07 01 10b5 8518 0604 00 07 02 10b5 8518 0604 00 06 00 10b5 8518 0604 00 02 03 10b5 8518 0604 00 01 00 10b5 8518 0604 00 PCIE1: Bus 00 - 0b PCIE2: connected as Root Complex Scanning PCI bus 0d 0d 00 1957 0040 0b20 00 PCIE2: Bus 0c - 0d In: serial ... Signed-off-by: Peter Tyser <ptyser@xes-inc.com> CC: wd@denx.de CC: sr@denx.de CC: galak@kernel.crashing.org
* p1_p2_rdb: to set SQW/INT pin of RTC as INT linePriyanka Jain2010-11-12-1/+3
| | | | | | | | | | SQW/INT pin in RTC can be used for generating square wave(by default) or as interrupt line. U-boot is registering this pin for interrupts. Configuring SQW/INT bit as interrupt line during board initialization to avoid spurious interrupts generated by square wave. Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Makefile: move all Power Architecture boards into boards.cfgWolfgang Denk2010-10-18-7/+0
| | | | | | | | | | Clean up Makefile, and drop a lot of the config.mk files on the way. We now also automatically pick all boards that are listed in boards.cfg (and with all configurations), so we can drop the redundant entries from MAKEALL to avoid building these twice. Signed-off-by: Wolfgang Denk <wd@denx.de>
* Rename TEXT_BASE into CONFIG_SYS_TEXT_BASEWolfgang Denk2010-10-18-5/+5
| | | | | | | | | | | | The change is currently needed to be able to remove the board configuration scripting from the top level Makefile and replace it by a simple, table driven script. Moving this configuration setting into the "CONFIG_*" name space is also desirable because it is needed if we ever should move forward to a Kconfig driven configuration system. Signed-off-by: Wolfgang Denk <wd@denx.de>
* mkconfig: change CONFIG_MK_ prefix into plain CONFIG_Wolfgang Denk2010-10-18-3/+3
| | | | | | | | | | | | | | | | | | | | When planning for more generalization and Makefile cleanup it became obvious that the introduction of a separate CONFIG_MK_ name space for config options that were set through scripting in the Makefile was not a good idea. Originally the idea was to provide a script-free approach to supply configuration options - there was no real need for a separate name space. But when we now convert the existing Makefile entries to make use of this approach, it would mean that we have to touch a large number of board config files and add #ifdef / #define sequences to "convert" from the CONFIG_MK_ to the CONFIG_ name space. It seems much cleaner to get rid of this somewhat arbitrary _MK string now for the few boards that actually use it. Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Mike Frysinger <vapier@gentoo.org>
* powerpc/85xx & 86xx: Rework ft_fsl_pci_setup to not require aliasesKumar Gala2010-07-20-13/+2
| | | | | | | | | | | Previously we used an alias the pci node to determine which node to fixup or delete. Now we use the new fdt_node_offset_by_compat_reg to find the node to update. Additionally, we replace the code in each board with a single macro call that makes assumes uniform naming and reduces duplication in this area. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 85xx/p1_p2_rdb: Added RevD board version supportPoonam Aggrwal2010-06-29-3/+13
| | | | | | | | - Also modified the code to use io accessors. Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Dipen Dudhat <dipen.dudhat@freescale.com> Acked-by: Kumar Gala <galak@kernel.crashing.org>
* 85xx/p1_p2_rdb: Modify the CLK_CTRL value for DDR at 667MHzPoonam Aggrwal2010-06-29-1/+1
| | | | | | | | | | | Use a slighly larger value of CLK_CTRL for DDR at 667MHz which fixes random crashes while linux booting. Applicable for both NAND and NOR boot. Signed-off-by: Sandeep Gopalpet <sandeep.kumar@freescale.com> Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Acked-by: Andy Fleming <afleming@freescale.com>
* ppc/85xx: Fixup PCI nodes for P1_P2_RDBKumar Gala2010-04-26-0/+4
| | | | | | | | While we had ft_pci_board_setup it wasn't being called by ft_board_setup. Fix that so we actually update the device tree PCI nodes on P1_P2_RDB boards. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Create CPUDIR variablePeter Tyser2010-04-13-1/+1
| | | | | | | | | | | | The CPUDIR variable points to the location of a target's CPU directory. Currently, it is set to cpu/$CPU. However, using $CPUDIR will allow for more flexibility in the future. It lays the groundwork for reorganizing U-Boot's directory structure to support a layout such as: arch/$ARCH/cpu/$CPU/* (architecture with multiple CPU types) arch/$ARCH/cpu/* (architecture with one CPU type) Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
* PCIe, USB: Replace 'end point' references with 'endpoint'Peter Tyser2010-01-17-2/+2
| | | | | | | | | When referring to PCIe and USB 'endpoint' is the standard naming convention. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Remy Bohmer <linux@bohmer.net>
* ppc/85xx: Map boot page guarded for MP bootKumar Gala2010-01-05-1/+1
| | | | | | | We already map the page cache-inhibited. There is no reason we shouldn't also be marking it guarded to prevent speculative accesses. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/85xx: Make flash TLB entry determined at runtime on FSL boardsKumar Gala2010-01-05-1/+1
| | | | | | | Rather than hard coding which TLB entry the FLASH is mapped with we can use find_tlb_idx to determine the entry. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/85xx: Move to using fsl_setup_hose on P1/P2 RDBKumar Gala2010-01-05-6/+4
| | | | | | | | We can use fsl_setup_hose to determine if we are a agent/end-point or a host. Rather than using some SoC specific register we can just look at the PCI cfg space of the host controller to determine this. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Revert "ppc/85xx/pci: fsl_pci_init: pcie agent mode support"Kumar Gala2009-11-04-2/+2
| | | | | | | | | | | This reverts commit 70ed869ea5f6b1d13d7b140c83ec0dcd8a127ddc. There isn't any need to modify the API for fsl_pci_init_port to pass the status of host/agent(end-point) status. We can determine that internally to fsl_pci_init_port. Revert the patch that makes the API change. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/85xx/pci: fsl_pci_init: pcie agent mode supportVivek Mahajan2009-10-27-2/+2
| | | | | | | | | | | | | | | Originally written by Jason Jin and Mingkai Hu for mpc8536. When QorIQ based board is configured as a PCIe agent, then unlock/enable inbound PCI configuration cycles and init a 4K inbound memory window; so that a PCIe host can access the PCIe agents SDRAM at address 0x0 * Supported in fsl_pci_init_port() after adding pcie_ep as a param * Revamped copyright in drivers/pci/fsl_pci_init.c * Mods in 85xx based board specific pci init after this change Signed-off-by: Vivek Mahajan <vivek.mahajan@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 85xx/p1_p2_rdb: Fixing DDR configuration for 800MHz data ratePoonam Aggrwal2009-10-27-2/+2
| | | | | Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 85xx/p1_p2rdb: Fix crash while configuring 32 bit DDR i/f for P1020RDB.Poonam Aggrwal2009-10-27-8/+8
| | | | | | | The data being modified was in NOR flash which caused the crash. Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/P1_P2_RDB: On-chip BootROM supportDipen Dudhat2009-10-16-0/+12
| | | | | | | | | On Chip BootROM support for P1 and P2 series RDB platforms. This patch is derived from latest On Chip BootROM support on MPC8536DS Signed-off-by: Dipen Dudhat <dipen.dudhat@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/P1_P2_RDB: NAND Boot SupportDipen Dudhat2009-10-16-0/+17
| | | | | | | | | NAND Boot support for P1 and P2 series RDB platforms. This patch is derived from NAND Boot support on MPC8536DS. Signed-off-by: Dipen Dudhat <dipen.dudhat@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/85xx: 32bit DDR changes for P1020/P1011Poonam Aggrwal2009-09-24-5/+24
| | | | | | | | | | | | | The P1020/P1011 SOCs support max 32bit DDR width as opposed to P2020/P2010 where max DDR data width supported is 64bit. As a next step the DDR data width initialization would be made more dynamic with more flexibility from the board perspective and user choice. Going forward we would also remove the hardcodings for platforms with onboard memories and try to use the FSL SPD code for DDR initialization. Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/85xx: Clean up use of LAWAR definesKumar Gala2009-09-24-2/+2
| | | | | | | | | On 85xx platforms we shouldn't be using any LAWAR_* defines but using the LAW_* ones provided by fsl-law.h. Rename any such uses and limit the LAWAR_ to the 83xx platform as the only user so we will get compile errors in the future. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/85xx: Clean up p1_p2_rdb PCI setupKumar Gala2009-09-24-20/+22
| | | | | | | | General code cleanup to use in/out IO accessors as well as making the code that prints out info sane between board and generic fsl pci code. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/85xx: Introduce RESET_VECTOR_ADDRESS to handle non-standard link addressKumar Gala2009-09-09-0/+2
| | | | | | | | | | Some board ports place TEXT_BASE at a location that would cause the RESET_VECTOR_ADDRESS not to be at 0xfffffffc when we link. By default we assume RESET_VECTOR_ADDRESS will be 0xfffffffc if the board doesn't explicitly set it. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
* ppc/8xxx: Refactor code to determine if PCI is enabled & agent/hostKumar Gala2009-09-08-6/+4
| | | | | | | | | | | Refactor the code into a simple bitmask lookup table that determines if a given PCI controller is enabled and if its in host/root-complex or agent/end-point mode. Each processor in the PQ3/MPC86xx family specified different encodings for the cfg_host_agt[] and cfg_IO_ports[] boot strapping signals. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/8xxx: Remove ddr_pd_cntl register since it doesn't existKumar Gala2009-09-08-5/+0
| | | | | | | | The ddr_pd_cntl isn't defined in any reference manual and thus we wil remove especially since we set it to 0, which would most likely be its POR value. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 85xx: Added PCIe support for P1 P2 RDBPoonam Aggrwal2009-08-28-1/+119
| | | | | | | Call fsl_pci_init_port() to initialize all the PCIe ports on the board. Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 85xx: Move to a common linker scriptKumar Gala2009-08-28-143/+0
| | | | | | | | There are really no differences between all the 85xx linker scripts so we can just move to a single common one. Board code is still able to override the common one if need be. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 85xx: Add support for P2020RDB boardPoonam Aggrwal2009-08-28-0/+809
The code base adds P1 & P2 RDB platforms support. The folder and file names can cater to future SOCs of P1/P2 family. P1 & P2 processors are 85xx platforms, part of Freescale QorIQ series. Tested following on P2020RDB: 1. eTSECs 2. DDR, NAND, NOR, I2C. Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
generated by cgit v1.1 at 2024-12-23 15:22:45 +0000