arm-boot/u-boot-imx.git - U-boot NXP imx6

	Commit message (Collapse)	Author	Age	Lines
*	MLK-10567: Extend u-boot imximage to support check bits set/clr	Nitin Garg	2015-04-29	-2/+2
\| \| \| \| \| \| \| \| \| \| \|	Add support for HAB "Check data" all bits set and clear check functionality. Rename CHECK_DATA to CHECK_BITS_SET. Flag=0 -> (address & mask) == 0 \| All bits clear Flag=2 -> (address & mask) == mask \| All bits set Signed-off-by: Nitin Garg <nitin.garg@freescale.com> (cherry picked from commit 0836912ef7a53d1f3d65f95556a34d03b8d65399)
*	MLK-10492-2 imx: mx7dsabresd: Add TFT43AB LCD support	Ye.Li	2015-04-29	-9/+9
\| \| \| \| \| \| \| \|	The mx7dsabresd uses new LCD TFT43AB which has 480 x 272 pixels. Update panel info for this LCD. Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit e77d667b20956a37de9d367a8914ef2fe79258df)
*	MLK-10477-5 imx: mx7dsabresd: Add EPDC support	Ye.Li	2015-04-29	-75/+250
\| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	To enable the EPDC feature: 1. Uncomments CONFIG_SPLASH_SCREEN and CONFIG_MXC_EPDC settings in mx7dsabresd.h 2. cd <kernel_dir>/firmware/imx 3. python ihex2bin.py -i epdc_ED060XD4C1_TC.fw.ihex -o epdc_splash.bin 4. cp epdc_splash.bin to [FAT partition on SD card] Since the EPDC has pinmux conflicts with ENET and QSPI. These two modules can't work at same time. Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit 8ba7f88f9efac9f90319b71644d3d1191f535d03)
*	MLK-10476 imx: mx7dsabresd: Fix 74LV driver issue	Ye.Li	2015-04-29	-8/+9
\| \| \| \| \| \| \| \| \|	Should write the bits to SDI in reverse order because of the bits will be shifted. Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit 83389e054d3cb7a905a3f81c20f395e784beb258) Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
*	MLK-10774-37 imx:mx7d fix qspi probe error	Peng Fan	2015-04-29	-2/+2
\| \| \| \| \| \|	We should use CONFIG_FSL_QSPI, but not CONFIG_QSPI Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
*	MLK-10774-35 imx:mx7 use power_init_board	Peng Fan	2015-04-29	-40/+24
\| \| \| \| \| \| \|	Upgrade to upstream way, using power_init_board. Add pfuze300 support. Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
*	MLK-10385-4 imx: mx7dsabresd: Add board codes for NAND flash support	Ye.Li	2015-04-29	-22/+25
\| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	Update board codes to support GPMI NAND flash. Since the GPMI NAND needs board rework, it is disabled at default. Two ways to enable GPMI NAND: 1. Define CONFIG_SYS_BOOT_NAND for NAND boot case 2. Modify the line 306 in mx7dsabresd.h from QSPI to NAND. #define CONFIG_SYS_USE_QSPI /* Enable the QSPI flash at default / to #define CONFIG_SYS_USE_NAND / Enable the NAND flash at default */ Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit 5db03facf3add6a95728bc97ac2300003a103932) Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
*	MLK-10363-3 Android: Add android support for MX7D SABRESD board	Ye.Li	2015-04-29	-0/+103
\| \| \| \| \| \| \| \| \| \| \| \|	Enable android fastboot, recovery, booti features for mx7d sabresd board by using new build target: mx7devkandroid_config Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit bfc2b467ddac9c6eccb3f39aad3663a959546b64) Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Conflicts: boards.cfg
*	MLK-10362 imx: mx7dsabresd: Add support for MX7D SABRESD board	Peng Fan	2015-04-29	-0/+1170
	Add i.MX7D SABRESD board BSP codes, with enabled modules: UART, PMIC, USB/OTG, SD, eMMC, ENET, I2C, 74LV IOX. Build target: mx7dsabresd_config Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit 3bf52a153e2964d4fdc17f0e8cb816686cbb6c2b) Conflicts: boards.cfg