| Commit message (Collapse) | Author | Age | Lines |
|
|
|
|
|
|
|
| |
Abstracted the CSF size in imximage from a hardcoded value to a config
setting CONFIG_CSF_SIZE. This configuration is only enabled for secure
boot.
Increased the size of the CSF default allocation to 0x4000. This size
covers the event the worst case of 4906-bits keys.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
On MX7D, boot rom can provide some boot information such as boot device,
arm freq, axi freq, etc. (see the structure below)
Offset Byte4 | Byte3 | Byte2 | Byte1
0x0 Reserved | Boot Device Type | Boot Device Instance | Reserved
0x4 ARM core frequency(in Hz)
0x8 AXI bus frequency(in Hz)
0x0C DDR frequency(in Hz)
0x10 GPT1 input clock frequency(in Hz)
0x14 Reserved
0x18
0x1C
The boot information can be accessed by get the pointer at 0x1E8. This patch
changes the u-boot to use the new approach. When manufacture boot, the info
recorded is the actual SD port, not the failed device.
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
| |
Use pmic framework to simplify code and make code clean.
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|
|
* Add mx7d_12x12_ddr3_arm2 target board support
* Initial support for mx7d_12x12_ddr3_arm2 target
board add support for base hardware eMMC, SD and
ECSPI boot.
Signed-off-by: Adrian Alonso <aalonso@freescale.com>
Signed-off-by: Ye.Li <B37916@freescale.com>
(cherry picked from commit 51d69f7996cc6e6da8bb3f0af751549cb2435e44)
Conflicts:
boards.cfg
|