| Commit message (Collapse) | Author | Age | Lines |
|---|
| |
|
|
|
|
|
|
|
| |
This pin is missed to change in patch:
"MLK-11230 imx6: USB: Modify OTG ID pin pad setting to pull up"
Should set it to pull down at default.
Signed-off-by: Ye.Li <B37916@freescale.com>
|
| |
|
|
|
|
|
| |
The SW1AB on PMIC is used for ARM_SOC_IN supply, set the standby voltage to
0.975V to save power when system is in DSM mode.
Signed-off-by: Bai Ping <b51503@freescale.com>
|
| |
|
|
|
|
|
|
|
|
| |
Set the ID pin pad to pull up not the pull down at default, otherwise
we can't enter the device mode, but always detect as host.
After this change we have to use portA cable to play as host,
and use portB cable for device.
Signed-off-by: Ye.Li <B37916@freescale.com>
|
| |
|
|
|
|
|
|
| |
The current pad DSE for QSPI is 60ohm. Per hardware team measurement,
this setting cause too strong drive to clock and data signals. Need
to change the DSE to 120ohm for better signal quality.
Signed-off-by: Ye.Li <B37916@freescale.com>
|
| |
|
|
|
|
|
|
| |
Abstracted the CSF size in imximage from a hardcoded value to a config
setting CONFIG_CSF_SIZE. This configuration is only enabled for secure
boot.
Increased the size of the CSF default allocation to 0x4000. This size
covers the event the worst case of 4906-bits keys.
|
| |
|
|
|
|
|
|
|
|
| |
Since directory name changed, need to change it in imximage.cfg, or
we will get "Can't stat board/freescale/mx6ulevk/plugin.bin".
Since this commit 7331a4cc0853722b4c3addf1927a2797f39f5de2
missed to update ddr, here update the plugin code.
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|
|
|
Since there is another 9x9 package for mx6ul, modify the BSP names
of ddr3 arm2 board and evk board to add 14x14 package info.
Also modify the loaded dtb file to align with kernel.
After the change, the build target for mx6ul ddr3 arm2 board is:
mx6ul_14x14_ddr3_arm2_config
and the build target for mx6ul evk board is:
mx6ul_14x14_evk_config
Signed-off-by: Ye.Li <B37916@freescale.com>
|
