summaryrefslogtreecommitdiff
path: root/board/freescale/mx6sabresd/mx6sabresd.c
Commit message (Collapse)AuthorAgeLines
* MLK-15341 mx6qpsabresd: add PHY AR8031 hw resetFugang Duan2017-07-12-10/+22
| | | | | | | | | | | | | | | Currently mx6qpsabresd board file only add PHY AR8031 gpio reset in non-DM driver, then net DM driver PHY cannot work after stress reboot test. So also add gpio reset for DM driver. RGMII and PHY work at VDDIO 1.8V has better timing and to align the IO voltage with kernel, also set the IO voltage to 1.8V. Since i.MX6QP tx_clk can loop from SOC internal, no need to set PHY output 125Mhz clock that can save power. Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com>
* MA-9375 [Android IMX] uboot: enable BCB and bootctrlzhang sanshan2017-06-21-87/+2
| | | | | | | | | * Add API to read\write MISC partition. * get the boot mode from BCB command when boot up. * get the boot up tactics from bootctrl. Change-Id: Icbba6340e10983dddc1b04804ecc012a3a3c57d0 Signed-off-by: zhang sanshan <sanshan.zhang@nxp.com>
* MLK-14845 mx6/mx7: Not call usb setup functions used by non-DM driverYe Li2017-05-09-0/+11
| | | | | | | | | | | Use CONFIG_DM_USB to comment out USB setup functions used by non-DM driver. So they won't be executed when using DM driver. These USB setup functions may setup power control pins to USB_PWR function not GPIO, which is different as the GPIO function used by USB vbus-supply. And cause the power control not work. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-13141 mx6qpsabresd: Do not touch VGEN3 and VGEN5Robin Gong2017-04-21-23/+28
| | | | | | | | | | VGEN3 and VGEN5 have been fused the right value in PF0100 on i.mx6qp board, so software didn't need to change their voltage output anymore. Otherwise, VGEN3 will be wrongly updated from 1.8v to 2.8v. Signed-off-by: Robin Gong <yibin.gong@nxp.com> (cherry picked from commit 6f7f185664a401f03f6ce6c81b996c1f27fdbe73) Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-12527-3 android: Add board support to enable android fastbootYe Li2017-04-05-0/+123
| | | | | | | | | | | | Add board level support for android fastboot feature. Each board has a android specified header file for defining android related configuraitons. And add build targets for their android uboot images building. For mx6qsabreauto, mx6sabresd and mx7dsabresd, we enable the android fastboot exclusive with DFU. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit 43fe988af28c5e51fb23aa846e04bc9698256926)
* MLK-12996 imx: mx6dqp/dq: Fix SATA read/write fail after booting from SATAYe Li2017-04-05-1/+8
| | | | | | | | | | | | | | | We found a issue in PLL6 ENET that changing the bit[1:0] DIV_SELECT for ENET ref clock will impact the SATA ref 100Mhz clock. If SATA is initialized before this changing, SATA read/write can't work after it. And we have to re-init SATA. The issue can reproduce on both i.MX6DQP and i.MX6DQ. IC investigation is ongoing. This patch is an work around that moves the ENET clock setting (enable_fec_anatop_clock) from ethernet init to board_init which is prior than SATA initialization. So there is no PLL6 change after SATA init. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit fd8fbf7fa0b10199ac89cd13cae851149f51accb)
* MLK-12791 mx6qpsabresd: Change ENET TXCLK clock from PLLYe Li2017-04-05-0/+10
| | | | | | | | | | | | | In u-boot, i.MX6QP sabresd board uses 125Mhz ref clock from PHY, While kernel uses the clock from internal PLL by setting GPR5 bit 9. When doing warm reset in kernel, the GPR regigster is not reset, so the clock source still is the PLL. This causes ENET in u-boot can't work. In this patch, we change the u-boot to use internal PLL to align with kernel for i.MX6QP. This also fixes the ENET issue after kernel warm reset. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit 7f00c72e17e4e440df62aa4945a619fdbc9cfd8f)
* MLK-11230 imx6: USB: Modify OTG ID pin pad setting to pull upYe.Li2017-04-05-1/+6
| | | | | | | | | | | Set the ID pin pad to pull up not the pull down at default, otherwise we can't enter the device mode, but always detect as host. After this change we have to use portA cable to play as host, and use portB cable for device. Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit b315d6b36a913d75d25284320e69050ebdf7a7eb)
* MLK-12495 mx6: Add LDO bypass supportYe Li2017-04-05-0/+191
| | | | | | | | | | | | | | | | Port LDO bypass support from v2015 to support the features: 1. Add check for 1.2GHz core speed. If Speed grading fuse is for 1.2GHz, enable LDO bypass and setup PMIC voltages. LDO bypass is dependent on the flatten device tree file. 2. We set WDOG_B in set_anatop_bypass() before, because it is the only case, but now on i.mx6sabreauto board, we didn't use ldo-bypass mode, but have to use WDOG_B to reboot whole board, so split these code to independent function so that board file can call it freely. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit 5b87d04dba66fa45375d59648838ef89f559f75d)
* MLK-12436-10: mx6sabresd: update board code and header fileYe Li2017-04-05-22/+138
| | | | | | | | | | | Align board code and header file with imx_v2016.03. Update pmic settings for i.MX6QP. wrap spi code together using CONFIG_MXC_SPI macro. To i.MX6SOLO, need to define nosmp in bootargs. Signed-off-by: Peng Fan <peng.fan@nxp.com> (cherry picked from commit bb35d09d140efc7ff9b74bbcd77d7827c1dd503e) Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-12434-3: mx6sabre: dynamic setting mmcdev and mmcrootPeng Fan2017-04-05-0/+9
| | | | | | | Dynamic setting mmcdev and mmcroot for mx6sabresd and mx6qsabreauto. Signed-off-by: Peng Fan <peng.fan@nxp.com> (cherry picked from commit 14040e07549a394500c11e815f31299e4fb0ac50)
* MLK-12425-4: mx6dlsabresd: support epdcPeng Fan2017-04-05-0/+231
| | | | | | | | | Support epdc for mx6dlsabresd board. Introduce a new configuration file mx6dlsabresd_epdc_defconfig. Add related settings. Signed-off-by: Peng Fan <peng.fan@nxp.com> (cherry picked from commit 467974ffda4b874e16f0c84974c3d65d85f84f6a)
* MLK-11304 MX6 SabreSD: Disable HDMI detectPeng Fan2017-04-05-1/+1
| | | | | | | | | | | | | | | | | As the HDMI splash screen feature is not well supported, we should not set it to be the default display. In case, users leave the 'panel' uboot environment variable empty and connect the board with a HDMI monitor, the HDMI detect funtion will work and enable the HDMI splash screen. So, this patch disables HDMI detect function so that users may only explicitly set the 'panel' variable to be 'HDMI' to use HDMI splash screen. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Signed-off-by: Liu Ying <Ying.Liu@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit d482c54a9fbf458fdb2270cf990d8ec727823bb1) (cherry picked from commit b484d36882c8db9ddb8262001cfef187a28051b2)
* MLK-10774-2 HDMI: splash screen function enhancementPeng Fan2017-04-05-11/+11
| | | | | | | | | | | | | | | | -Change HDMI video mode to VGA. -Add pixel clock fraction part setting in IPU driver, fix video mode timing issue. -Add overflow state clear workaround, fix kernel hang in HDMI driver issue. -Correct IPU clock to 264MHz. Signed-off-by: Sandor Yu <R01008@freescale.com> Signed-off-by: Nitin Garg <nitin.garg@freescale.com> Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit 5028519b434d5dfbe53c48ac4b115ff8b69bbac7) (cherry picked from commit 8dcbd43b971616fb67dc3b2af32e2d33f68ed0ce)
* MLK-14420-3 mx6qsabresd: Update mx6qsabresd to enable OF_CONTROL and DM driversYe Li2017-03-14-1/+50
| | | | | | | | | Modify and remove configurations conflicts with DM drivers from head file. Enable DM drivers and OF_CONTROL in defconfig. Also update the GPIO usage to call gpio_request before any gpio using, and update power_init_board since the PMIC APIs are changed in Pfuze DM driver. Signed-off-by: Ye Li <ye.li@nxp.com>
* mx6sabresd: Make Ethernet functional againFabio Estevam2016-11-06-0/+33
| | | | | | | | | | | | | | | | | Since commit ce412b79e7255770 ("drivers: net: phy: atheros: add separate config for AR8031") ethernet does not work on mx6sabresd. This commit correctly assigns ar8031_config() as the configuration function for AR8031 in the same way as done in the Linux kernel. However, on mx6sabresd design we need some additional configuration, such as enabling the 125 MHz AR8031 output that needs to be done in the board file. This also aligns with the same method that the kernel performs the AR8031 fixup in arch/arm/mach-imx/mach-imx6q.c. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
* mx6sabresd: Add Falcon mode supportDiego Dorta2016-10-17-0/+12
| | | | | | | | Allow i.MX6Q Sabre SD to load the kernel and dtb via SPL in Falcon mode. Based on the Falcon mode code for MX6 Gateworks Ventana board. Signed-off-by: Diego Dorta <diego.dorta@nxp.com>
* mx6sabresd: Make SPL DDR configuration to match the DCD tableFabio Estevam2016-10-04-154/+197
| | | | | | | | | | | | | | | | | | | | | | | | | | | When using SPL on i.mx6 we frequently notice some DDR initialization mismatches between the SPL code and the non-SPL code. This causes stability issues like the ones reported at 7dbda25ecd6d7c ("mx6ul_14x14_evk: Pass refsel and refr fields to avoid hang") and also: http://lists.denx.de/pipermail/u-boot/2016-September/266355.html . As the non-SPL code have been tested for long time and proves to be reliable, let's configure the DDR in the exact same way as the non-SPL case. The idea is simple: just use the DCD table and write directly to the DDR registers. Retrieved the DCD tables from: board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg and board/freescale/mx6sabresd/mx6qp.cfg (NXP U-Boot branch imx_v2015.04_4.1.15_1.0.0_ga) This method makes it easier for people converting from non-SPL to SPL code. Other benefit is that the SPL binary size is reduced from 44 kB to 39.9 kB. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
* treewide: replace #include <asm/errno.h> with <linux/errno.h>Masahiro Yamada2016-09-23-1/+1
| | | | | | | | | | | Now, arch/${ARCH}/include/asm/errno.h and include/linux/errno.h have the same content. (both just wrap <asm-generic/errno.h>) Replace all include directives for <asm/errno.h> with <linux/errno.h>. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> [trini: Fixup include/clk.] Signed-off-by: Tom Rini <trini@konsulko.com>
* mx6: ddr: Allow changing REFSEL and REFR fieldsFabio Estevam2016-09-06-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently MX6 SPL DDR initialization hardcodes the REF_SEL and REFR fields of the MDREF register as 1 and 7, respectively for DDR3 and 0 and 3 for LPDDR2. Looking at the MDREF initialization done via DCD we see that boards do need to initialize these fields differently: $ git grep 0x021b0020 board/ board/bachmann/ot1200/mx6q_4x_mt41j128.cfg:DATA 4 0x021b0020 0x00005800 board/ccv/xpress/imximage.cfg:DATA 4 0x021b0020 0x00000800 /* MMDC0_MDREF */ board/freescale/mx6qarm2/imximage.cfg:DATA 4 0x021b0020 0x7800 board/freescale/mx6qarm2/imximage.cfg:DATA 4 0x021b0020 0x00005800 board/freescale/mx6qarm2/imximage_mx6dl.cfg:DATA 4 0x021b0020 0x00005800 board/freescale/mx6qarm2/imximage_mx6dl.cfg:DATA 4 0x021b0020 0x00005800 board/freescale/mx6qsabreauto/imximage.cfg:DATA 4 0x021b0020 0x00005800 board/freescale/mx6qsabreauto/mx6dl.cfg:DATA 4 0x021b0020 0x00005800 board/freescale/mx6qsabreauto/mx6qp.cfg:DATA 4 0x021b0020 0x00005800 board/freescale/mx6sabresd/mx6dlsabresd.cfg:DATA 4 0x021b0020 0x00005800 board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg:DATA 4 0x021b0020 0x00005800 board/freescale/mx6slevk/imximage.cfg:DATA 4 0x021b0020 0x00001800 board/freescale/mx6sxsabreauto/imximage.cfg:DATA 4 0x021b0020 0x00000800 board/freescale/mx6sxsabresd/imximage.cfg:DATA 4 0x021b0020 0x00000800 board/warp/imximage.cfg:DATA 4 0x021b0020 0x00001800 So introduce a mechanism for users to be able to configure REFSEL and REFR fields as needed. Keep all the mx6 SPL users in their current REF_SEL and REFR values, so no functional changes for the existing users. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Eric Nelson <eric@nelint.com>
* mx6sabresd: Allow LVDS backlight to be functional after a kernel rebootMarco Franchi2016-06-18-2/+16
| | | | | | | | | | | | | | | Currently the LVDS backlight does not work in U-Boot after a “reboot” comand in the kernel. This problem occurs because the kernel uses this pin in PWM mode and U-Boot does not configure the backlight pin as GPIO functionality. So fix the problem by explicitly configuring the backlight pin as GPIO in U-Boot. Signed-off-by: Marco Franchi <marco.franchi@nxp.com> Acked-by: Stefano Babic <sbabic@denx.de> Tested-by: Fabio Estevam <fabio.estevam@nxp.com>
* board: mx6sabresd/auto: use simpler runtime cpu dection macrosPeng Fan2016-05-24-2/+2
| | | | | | | | Use simpler runtime cpu dection macros. Signed-off-by: Peng Fan <van.freenix@gmail.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
* mx6sabresd: Remove unneeded enable_lvds() functionFabio Estevam2016-04-03-11/+1
| | | | | | | | | | enable_lvds() function only set bits IOMUXC_GPR2_DATA_WIDTH_CH0_18BIT and IOMUXC_GPR2_DATA_WIDTH_CH1_18BIT, but these bits were already set previously inside setup_display(). We can safely remove enable_lvds() then. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
* mx6sabresd: Use VESA 1024x768 timingsFabio Estevam2016-03-25-14/+14
| | | | | | | | VESA 1024x768 results in much more accurate timings. Based on the patch from Soeren Moch for the tbs2910 board. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
* Use correct spelling of "U-Boot"Bin Meng2016-02-06-1/+1
| | | | | | | | | | Correct spelling of "U-Boot" shall be used in all written text (documentation, comments in source files etc.). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
* imx: mx6: implement board_mmc_get_env_devPeng Fan2016-02-04-0/+5
| | | | | | | | | | | | Implement board_mmc_get_env_dev for the boards. Following is examples: SD1/SD2/SD3: return devno; SD2/SD3: return devno - 1; SD2/SD4: if (devno == 2), return dev - 2; return dev - 1; Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
* imx: MX6DQ{P}/DL:SABRESD Fix bmode eMMC failureYe Li2016-02-02-1/+1
| | | | | | | | | | | The BOOTCFG value used by bmode for SABRESD eMMC boot are actually for SD card. Fixed the value to correct one. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Fabio Estevam <fabio.estevam@nxp.com>
* mx6sabresd: Simplify the Ethernet PHY configurationFabio Estevam2016-01-07-34/+2
| | | | | | | | | | | | | | | | | As per the AR8031 datasheet: "For a reliable power on reset, suggest to keep asserting the reset low long enough (10ms) to ensure the clock is stable and clock-to-reset 1ms requirement is satisfied." So do as suggested and also add a 100us delay after deasserting the reset line to guarantee that the PHY ID can be read correctly and the Atheros 8031 PHY driver can be loaded automatically. This results in a simpler code. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* mx6sabresd: Remove empty reset_cpu()Fabio Estevam2015-11-12-4/+0
| | | | | | | | There is really no need to provide an empty reset_cpu() implementation, so just remove it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
* imx: mx6sabresd: add i.MX6DQP Sabresd supportPeng Fan2015-10-30-6/+63
| | | | | | | | | | Add i.MX6DQP-Sabresd board support: 1. set fdt_file according to board_rev which is set at runtime. 2. Add mx6dqp_ddr_ioregs and calibration value for this board. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com>
* imx: mx6: ddr init MMDC according to ddr_typePeng Fan2015-09-02-0/+1
| | | | | | | | | | | | | | | | | To i.MX6, DDR3 and LPDDR2 is supported, so rename function mx6_dram_cfg to mx6_ddr3_cfg and the original mx6_dram_cfg function only is a wrapper. The new reimplemented function mx6_dram_cfg only invokes mx6_ddr3_cfg when ddr_type is for DDR3. Later we can use ddr_type to initialize MMDC for LPDDR2. Initialize ddr_type for different boards which enable SPL. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Tim Harvey <tharvey@gateworks.com> Cc: Stefan Roese <sr@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Stefan Roese <sr@denx.de>
* imx: mx6sabresd/sabreauto runtime setting fdt_filePeng Fan2015-08-02-0/+10
| | | | | | | | | | | | | Detect the SOC and board variant at runtime and change the dtb name, but not hardcoding the fdt_file env variable. Take the following patch as a reference. Íd58699b157df75f1aa0b363ea9c21add21a0c "mx6cuboxi: Load the correct 'fdtfile' variable" Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
* mx6sabresd: Use 'int' for return valuesFabio Estevam2015-07-26-1/+2
| | | | | | | | | | The variable 'ret' is used to store the value returned by pfuze_mode_init(), so it should of type 'int' instead of 'unsigned int' in order to correctly handle negative numbers. Fix the variable type. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* mx6sabresd: Remove uneeded ifdefFabio Estevam2015-04-22-4/+0
| | | | | | RTT_NOM_120OHM is not defined, so remove its ifdef. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* mx6sabresd: Fix SPL memory descriptionFabio Estevam2015-04-22-4/+5
| | | | | | | mx6sabresd has four MT41K128M16JT-125 chips. Each memory has 16-bit bus and 2GiB, so fix the width and density fields accordingly. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* imx:mx6 set normal APS and standby PFM modePeng Fan2015-02-11-1/+5
| | | | | | | | To normal mode, use APS switching mode. To standy mode, use PFM switching mode. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
* imx:mx6sabresd add board level support for usbPeng Fan2014-12-19-0/+68
| | | | | | Add pinmux settings, implement board_ehci_hcd_init and board_ehci_power Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* imx: mx6sabresd: Use the pfuze common init functionYe.Li2014-11-20-43/+9
| | | | | | | | Modify the pfuze init for mx6sabresd to use the shared "pfuze_common_init" function. And move this initialization to power_init_board. Signed-off-by: Ye.Li <B37916@freescale.com>
* mx6sabresd: Access SRC_SBMR1 register via structureFabio Estevam2014-11-20-3/+2
| | | | | | | In U-boot it is preferred to access the register via structure pointer, so convert it such style. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* mx6sabresd: State that only mx6q is supported in SPLFabio Estevam2014-11-20-4/+2
| | | | | | Make clear that current SPL code only supports the mx6q variant. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* mx6sabresd: Move the DCD settings to spl codeFabio Estevam2014-11-20-0/+27
| | | | | | | | | | | mx6sabresd_spl.cfg configures CCM registers, GPR registers and CCM_CCOSR. Move the configuration to the spl code. CCM_CCOSR setting is no longer required to get audio functionality in the kernel, so remove such setting. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* mx6sabresd: Staticize when possibleFabio Estevam2014-11-13-6/+6
| | | | | | Annotate 'static' when appropriate for the variables used locally. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* mx6sabresd: Fix error handling in board_mmc_init()Fabio Estevam2014-11-13-4/+6
| | | | | | | | When an invalid USDHC port is passed we should return -EINVAL instead of 0. Also, return the error immediately on fsl_esdhc_initialize() failure. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* imx6: SPL support for iMX6 SabreSDJohn Tobias2014-11-13-2/+184
| | | | | | | | This patch will enable the support for SPL on iMX6 SabreSD. It tested on SD2 and SD3 mmc port (Switch 1 or 2 of SW6) Signed-off-by: John Tobias <john.tobias.ph@gmail.com> Acked-by: Stefano Babic <sbabic@denx.de>
* mx6sabresd: Add Seiko WVGA panel supportFabio Estevam2014-10-30-0/+61
| | | | | | | | | | | | | Add support for the 4.3'' Seiko WVGA parallel display. In order to direct the splash screen to the Seiko display: => setenv panel SEIKO-WVGA => save => reset Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
* spi: mxc: fix sf probe when using mxc_spiNikita Kiryanov2014-09-24-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MXC SPI driver has a feature whereas a GPIO line can be used to force CS high across multiple transactions. This is set up by embedding the GPIO information in the CS value: cs = (cs | gpio << 8) This merge of cs and gpio data into one value breaks the sf probe command: if the use of gpio is required, invoking "sf probe <cs>" will not work, because the CS argument doesn't have the GPIO information in it. Instead, the user must use "sf probe <cs | gpio << 8>". For example, if bank 2 gpio 30 is used to force cs high on cs 0, bus 0, then instead of typing "sf probe 0" the user now must type "sf probe 15872". This is inconsistent with the description of the sf probe command, and forces the user to be aware of implementaiton details. Fix this by introducing a new board function: board_spi_cs_gpio(), which will accept a naked CS value, and provide the driver with the relevant GPIO, if one is necessary. Cc: Eric Nelson <eric.nelson@boundarydevices.com> Cc: Eric Benard <eric@eukrea.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Tim Harvey <tharvey@gateworks.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Tom Rini <trini@ti.com> Cc: Marek Vasut <marex@denx.de> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Reviewed-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
* pmic: pmic_pfuze100: Use a shorter name for PMIC nameFabio Estevam2014-08-08-1/+1
| | | | | | | | | | | It is redundant to use 'PFUZE100_PMIC' as the PMIC name because we already know it is a PMIC. Call it simply 'PFUZE100' instead. Cc: Tim Harvey <tharvey@gateworks.com> Cc: Markus Niebel <Markus.Niebel@tq-group.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* mx6sabred: Add PFUZE100 PMIC supportFabio Estevam2014-05-28-0/+84
| | | | | | | | mx6sabresd boards have a PFUZE100 PMIC connected to I2C2 bus. Add support for it Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* mx6sabresd: use common detect_hdmiEric Benard2014-04-15-8/+0
| | | | Signed-off-by: Eric Bénard <eric@eukrea.com>
* mx6sabresd: use common board_video_skipEric Benard2014-04-15-56/+3
| | | | Signed-off-by: Eric Bénard <eric@eukrea.com>
generated by cgit v1.1 at 2024-07-15 12:57:13 +0000