| Commit message (Collapse) | Author | Age | Lines |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
http://sw-stash.freescale.net/projects/IMX/repos/ddr-scripts-rel/commits/8111e4d0cd81226899be637013048281e3c097b4
http://compass.freescale.net/livelink/livelink?func=ll&objId=234753630&objAction=browse&viewType=1
arik_r2_sabre_ddr3_528_1.13.inc is for sabre-AI
arik_r2_sdb_ddr3_528_1.13.inc is for sabresd
1.13<-1.12:
Change log:
1. Remove 20c4080
1.12<-1.10
Change log:
1. NoC register DDRCONF change to 0 which is compatible
for only CS0 is used on board
2. Change 2 values to compatible with our DDR aid script,
these two registers doesn’t have any effect on current system
tRPA = 0;
//this bit only used in DDR2 mode
tAOFPD/tAONPD=0x4;
//These register only works when MDPDC. SLOW_PD = 1 which is 0 in script
Test results:
One mx6qp-sdb and one mx6qp-ard board and one mx6qp-ard board passed
60 hours memtester stress teset.
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
ddr script update to 1.09:
http://compass.freescale.net/livelink/livelink?func=ll&objId=
234694528&objAction=browse&viewType=1
arik_r2_sabre_ddr3_528_1.09.inc is for sabre-auto board.
arik_r2_sdb_ddr3_528_1.09.inc is for sabre-sd board.
Changelog:
1. Optimize DQS duty cycle setting
2. Optimize ZQ PU/PD value
Test results:
2 ARD boards.
2 6QP-SDB boards.
1 6DP-SDB board.
All passed overnight memtester stress test.
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
(cherry picked from commit ba8dcef9d8e10e46130559ce6defe4411bd1d1a6)
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Update ddr script to version 1.07:
1. Change MDCCR from default value to 0x24912492,
it will improve DDR duty cycle
2. The MMDC reorder bypass option, which has better DRAM performance
URL:
http://compass.freescale.net/livelink/livelink?func=ll&objId=234335046&objAction=browse&viewType=1
Test Results:
3 boards passed 48 hours memtester stress test.
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|
| |
|
|
|
|
|
|
| |
Abstracted the CSF size in imximage from a hardcoded value to a config
setting CONFIG_CSF_SIZE. This configuration is only enabled for secure
boot.
Increased the size of the CSF default allocation to 0x4000. This size
covers the event the worst case of 4906-bits keys.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Update IPU QoS settings from 0x007f007f to 0x77177717
according to the SoC team's recommendation. This change
should be able to balance AXI ID0/2/3 priority and set
AXI ID1 priority relatively lower, which matches the way
we use AXI ID0/1/2/3 for IDMAC23(0), regular IDMACs,
IDMAC27 and IDMAC28 respectively in kernel. The specific
priority values for each AXI ID are supposed to be picked
for the sake of an overall good system performance.
Signed-off-by: Liu Ying <Ying.Liu@freescale.com>
(cherry picked from commit 7c4bee613dc47c9e2fb147a159236bca04b8618b)
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Update to 1.05 ddr script, url:
http://compass.freescale.net/livelink/livelink?func=ll&
objId=233944823&objAction=browse&viewType=1
File name:
arik_r2_sabre_ddr3_528_1.05c.inc
Update:
Read latency
Aging control for IPU1/PRE0/PRE3
Aging control for IPU2/PRE1/PRE2
Test results:
3 boards passed overnight memtester stress test.
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
(cherry picked from commit b8625b732cfc59e44955f0e23b581e7896be1733)
|
|
|
1. Add DDR script v1.04 for i.MX6DQP SABREAUTO board.
2. On CPU3 board, enet RGMII tx clock is from internal PLL. Set the GPR5[9]
and init the enet pll output to 125Mhz.
3. On CPU3 board, SW1ABC=VDDSOC_IN, SW2=VDDARM_IN.
Build target: mx6qpsabreauto_config
Signed-off-by: Fugang Duan <B38611@freescale.com>
Signed-off-by: Robin Gong <b38343@freescale.com>
Signed-off-by: Ye.Li <B37916@freescale.com>
(cherry picked from commit e0b316f071aa17c8e41a50f395346ab9f012e665)
Conflicts:
board/freescale/mx6qsabreauto/mx6qsabreauto.c
boards.cfg
|
