summaryrefslogtreecommitdiff
path: root/board/freescale/mx6qarm2
Commit message (Collapse)AuthorAgeLines
* MLK-14845 mx6/mx7: Not call usb setup functions used by non-DM driverYe Li2017-05-09-0/+10
| | | | | | | | | | | Use CONFIG_DM_USB to comment out USB setup functions used by non-DM driver. So they won't be executed when using DM driver. These USB setup functions may setup power control pins to USB_PWR function not GPIO, which is different as the GPIO function used by USB vbus-supply. And cause the power control not work. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-13407: mx6qarm2: mt128x64mx3 2: add init pre charge all commandAdrian Alonso2017-04-05-3/+10
| | | | | | | | | | | | | | - Adjust ZQ delay for MMDC clock frequency at 400MHz - Precharge all commands per JEDEC The memory controller may optionally issue a Precharge-All command prior to the MRW Reset command, this is strongly recommended to ensure a robust DRAM initialization DDR Calibration script: http://sw-stash.freescale.net/projects/IMX/repos/ddr-scripts-rel/commits/a72e010a1fd8c7fe0fda7bdc4d058c478e94c3da Signed-off-by: Adrian Alonso <adrian.alonso@nxp.com> (cherry picked from commit 03cc626df73d6c2bb36daf280b1cd43170c298a0)
* MLK-13131: mx6qarm2: add fastboot and recovery supportAdrian Alonso2017-04-05-0/+33
| | | | | | | Add fastboot and recovery mode support for mx6qarm Signed-off-by: Adrian Alonso <adrian.alonso@nxp.com> (cherry picked from commit 505e899ce582118da28ca1f4487ce7f179225bd7)
* MLK-13132: mx6qarm2: mt128x64mx32: adjust ahb/axi podf dividersAdrian Alonso2017-04-05-1/+1
| | | | | | | | | Adjust ahb/axi clock root podf dividers to be divided by 1 to allow ahb/axi clock root to be 24Mhz when sourced from osc_clk. Signed-off-by: Adrian Alonso <adrian.alonso@nxp.com> (cherry picked from commit 9e80234c823d6a2a0d9e10ab4c4c605bf646bd22)
* MLK-14499 mx6qarm2: Convert to use OF_CONTROL and DM driverYe Li2017-04-05-48/+33
| | | | | | | | | Modify the mx6qarm2 configurations to enable OF_CONTROL and DM drivers: USB, Ethernet, UART and MMC. Add two DTS files for imx6q/dl arm2 board and imx6q pop arm2 board. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-12442: imx: mx6qarm2: lpddr2 set dram 2 channel fixed modeAdrian Alonso2017-04-05-2/+12
| | | | | | | | | | | | | | Setup MMDC in two channel fixed mode Initialize dram banks for two channel fixed mode DRAM bank = 0x00000000 -> start = 0x10000000 -> size = 0x20000000 DRAM bank = 0x00000001 -> start = 0x80000000 -> size = 0x20000000 Signed-off-by: Adrian Alonso <adrian.alonso@nxp.com> (cherry picked from commit bf1d8faf1dab7c4245ba7b79ceef6279cff45625)
* MLK-11230 imx6: USB: Modify OTG ID pin pad setting to pull upYe.Li2017-04-05-1/+5
| | | | | | | | | | | Set the ID pin pad to pull up not the pull down at default, otherwise we can't enter the device mode, but always detect as host. After this change we have to use portA cable to play as host, and use portB cable for device. Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit b315d6b36a913d75d25284320e69050ebdf7a7eb)
* MLK-12500-2 HAB: Add commented secure boot configurationsYe Li2017-04-05-0/+4
| | | | | | | | | | | | CONFIG_SECURE_BOOT is used for signed image building, this configuration is not enabled at default. Comment it in mx6/mx7 common header file. Users can uncomment it to enable. Also add CONFIG_CSF_SIZE for defining the CSF reserved size and resize the CONFIG_CSF_SIZE to 0x4000 to align with v2016.03. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit 01cc7d9bc205251c13712418d51f3a4d7b20861b)
* MLK-12495 mx6: Add LDO bypass supportYe Li2017-04-05-0/+8
| | | | | | | | | | | | | | | | Port LDO bypass support from v2015 to support the features: 1. Add check for 1.2GHz core speed. If Speed grading fuse is for 1.2GHz, enable LDO bypass and setup PMIC voltages. LDO bypass is dependent on the flatten device tree file. 2. We set WDOG_B in set_anatop_bypass() before, because it is the only case, but now on i.mx6sabreauto board, we didn't use ldo-bypass mode, but have to use WDOG_B to reboot whole board, so split these code to independent function so that board file can call it freely. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit 5b87d04dba66fa45375d59648838ef89f559f75d)
* MLK-12436-3: mx6qarm2: add new board revision supportPeng Fan2017-04-05-0/+294
| | | | | | | | | | | | | | | | Add mx6qarm2 new board revision support using mx6q pop SoC Enable DRAM support for imx6q PoP SoC with populated LPDDR2 MT42L128M64D2 DDR calibration script: http://sw-stash.freescale.net/projects/IMX/repos/ddr-scripts-rel/commits/040ee38ba9ad238fcb6053b663746d51321abb69 Test result: Stress test passed. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Adrian Alonso <adrian.alonso@nxp.com> (cherry picked from commit b0ac10892cad46c22accf89c04ea59c46bd9eb01)
* MLK-12436-2: mx6qarm2: update ddr scriptsPeng Fan2017-04-05-1/+176
| | | | | | | | | | | | | | | | | | | | | | | | ALign with imx_v2015.04. Also to lpddr2 support: From commit: "620cf5f3d4cf37b065b5857a8ea91d61bf6c471d" " Current uboot supports for running LPDDR2 at 400MHz on MX6Q ARM2 board, but there is a problem in switching pre_periph_clk_sel to pll2_pfd2. We cannot directly change the parent of pre_periph_clk_sel as this mux is not a glitchless mux. We need to follow the correct procedure and wait for the busy bits to clear before switching. Change to follow the procedure: 1. Set periph_clk2 to OSC. 2. Switch the periph_clk to periph_clk2, checking the CCM_CDHIPR for periph_clk , ahb_podf and axi_podf busy bits. 3. Setting the pre_periph_clk to PLL2 PFD 396M. 4. Switch the periph_clk back to pre_periph_clk and checking CCM_CDHIPR busy bits. " Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Ye.Li <ye.li@nxp.com> (cherry picked from commit febf98c68853030ce5c1f9124e77d75456e71314)
* MLK-12436-1: mx6qarm2: support i.MX6DQ PoP lpddr2 boardPeng Fan2017-04-05-2/+10
| | | | | | | Add the support for i.MX6DQ PoP lpddr2 ARM2 board. Signed-off-by: Peng Fan <peng.fan@nxp.com> (cherry picked from commit e8777e91a239599ffd231ef56c60d49b68e5e3fc)
* MLK-14250-6 mx6dq/dl: Add plugin boot support for arm2 boardsYe Li2017-04-05-2/+1196
| | | | | | | | | | | | | Add plugin.S for plugin boot initialization on mx6dq/dl arm2 board. Need to set "CONFIG_USE_IMXIMG_PLUGIN" for this feature. New build configurations are added for the plugin: mx6dlarm2_lpddr2_plugin_defconfig mx6dlarm2_plugin_defconfig mx6qarm2_lpddr2_plugin_defconfig configs/mx6qarm2_plugin_defconfig Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-12434-2: mx6qarm2: dynamic setting mmcdev and mmcrootPeng Fan2017-04-05-1/+16
| | | | | | | Dynamic setting mmcdev and mmcroot for mx6qarm2. Signed-off-by: Peng Fan <peng.fan@nxp.com> (cherry picked from commit 54ea563dbe1804e426afbbf0710ffa815551d92b)
* treewide: replace #include <asm/errno.h> with <linux/errno.h>Masahiro Yamada2016-09-23-1/+1
| | | | | | | | | | | Now, arch/${ARCH}/include/asm/errno.h and include/linux/errno.h have the same content. (both just wrap <asm-generic/errno.h>) Replace all include directives for <asm/errno.h> with <linux/errno.h>. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> [trini: Fixup include/clk.] Signed-off-by: Tom Rini <trini@konsulko.com>
* mx6qarm2: imximage_mx6dl.cfg update to fix tINIT3 violationTom Rini2016-04-03-2/+2
| | | | | | | | | | | Having had a similar board and memory part under logic analyzer, a tINIT3 violation was measured. The fix was involved keeping tXPR and SDE_to_RST at the power-on defaults and setting RST_to_CKE the JEDEC value for LPDDR2. Cc: Jason Liu <jason.hui.liu@nxp.com> Cc: Ye Li <ye.li@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
* mx6qarm2: Update maintainer's emailsFabio Estevam2016-03-02-2/+2
| | | | | | Use the new NXP emails. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
* imx: mx6: implement board_mmc_get_env_devPeng Fan2016-02-04-0/+5
| | | | | | | | | | | | Implement board_mmc_get_env_dev for the boards. Following is examples: SD1/SD2/SD3: return devno; SD2/SD3: return devno - 1; SD2/SD4: if (devno == 2), return dev - 2; return dev - 1; Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
* mx6: remove SYS_SOC from board KconfigPeng Fan2015-09-13-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | Remove duplicated SYS_SOC Kconfig entry from board Kconfig, because we have this entry in arch/arm/cpu/armv7/mx6/Kconfig. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Stefan Roese <sr@denx.de> Cc: Troy Kisky <troy.kisky@boundarydevices.com> Cc: Nikita Kiryanov <nikita@compulab.co.il> Cc: "Eric Bénard" <eric@eukrea.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Tim Harvey <tharvey@gateworks.com> Cc: Marek Vasut <marex@denx.de> Cc: Markus Niebel <Markus.Niebel@tq-group.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Christian Gmeiner <christian.gmeiner@gmail.com> Acked-by: Markus Niebel <Markus.Niebel@tq-group.com> Acked-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
* imx:mx6qarm2 add board level support for usbPeng Fan2014-12-19-0/+42
| | | | | | Add pinmux settings and implement board_ehci_hcd_init Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* mx6qarm2: Fix error handling in board_mmc_init()Fabio Estevam2014-11-21-4/+6
| | | | | | | | When an invalid USDHC port is passed we should return -EINVAL instead of 0. Also, return the error immediately on fsl_esdhc_initialize() failure. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* kconfig: arm: introduce symbol for ARM CPUsGeorges Savoundararadj2014-10-29-3/+0
| | | | | | | | | | | | | | | | | This commit introduces a Kconfig symbol for each ARM CPU: CPU_ARM720T, CPU_ARM920T, CPU_ARM926EJS, CPU_ARM946ES, CPU_ARM1136, CPU_ARM1176, CPU_V7, CPU_PXA, CPU_SA1100. Also, it adds the CPU feature Kconfig symbol HAS_VBAR which is selected for CPU_ARM1176 and CPU_V7. For each target, the corresponding CPU is selected and the definition of SYS_CPU in the corresponding Kconfig file is removed. Also, it removes redundant "string" type in some Kconfig files. Signed-off-by: Georges Savoundararadj <savoundg@gmail.com> Acked-by: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
* imx: mx6dlarm2: Add support for i.MX6Q/DL arm2 LPDDR2 boardsYe.Li2014-09-30-7/+510
| | | | | | | | Update the ddr scripts for LPDDR2 and add two build configs for LPDDR2 arm2 board. Since the LPDDR2 arm2 board has different DDR size, use CONFIG_DDR_MB in defconfig to replace the PHYS_SDRAM_SIZE. Signed-off-by: Ye.Li <B37916@freescale.com>
* imx: mx6dlarm2: Add support for i.MX6DL arm2 DDR3 boardYe.Li2014-09-30-0/+149
| | | | | | | | | | | | | This patch adds the i.MX6DL arm2 board support. The i.MX6DL ARM2 shared the same board with i.MX6Q ARM2 board since the i.MX6DL is pin-pin compatible with i.MX6Q. The patch also support the DDR 32-BIT mode option. Please define CONFIG_DDR_32BIT in the board configure file to enable DDR 32-BIT mode.But due to the board design, it's 64bit DDR buswidth physically, so, if you CONFIG_DDR_32BIT, the DDR memory size will be half of it. Signed-off-by: Ye.Li <B37916@freescale.com>
* kconfig: remove redundant "string" type in arch and board KconfigsMasahiro Yamada2014-09-13-5/+0
| | | | | | | | | | | | | | | | | | Now the types of CONFIG_SYS_{ARCH, CPU, SOC, VENDOR, BOARD, CONFIG_NAME} are specified in arch/Kconfig. We can delete the ones in arch and board Kconfig files. This commit can be easily reproduced by the following command: find . -name Kconfig -a ! -path ./arch/Kconfig | xargs sed -i -e ' /config[[:space:]]SYS_\(ARCH\|CPU\|SOC\|\VENDOR\|BOARD\|CONFIG_NAME\)/ { N s/\n[[:space:]]*string// } ' Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* Add board MAINTAINERS filesMasahiro Yamada2014-07-30-0/+6
| | | | | | | | | | | | | | | | | | | | We have switched to Kconfig and the boards.cfg file is going to be removed. We have to retrieve the board status and maintainers information from it. The MAINTAINERS format as in Linux Kernel would be nice because we can crib the scripts/get_maintainer.pl script. After some discussion, we chose to put a MAINTAINERS file under each board directory, not the top-level one because we want to collect relevant information for a board into a single place. TODO: Modify get_maintainer.pl to scan multiple MAINTAINERS files. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Suggested-by: Tom Rini <trini@ti.com> Acked-by: Simon Glass <sjg@chromium.org>
* kconfig: add board Kconfig and defconfig filesMasahiro Yamada2014-07-30-0/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds: - arch/${ARCH}/Kconfig provide a menu to select target boards - board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig set CONFIG macros to the appropriate values for each board - configs/${TARGET_BOARD}_defconfig default setting of each board (This commit was automatically generated by a conversion script based on boards.cfg) In Linux Kernel, defconfig files are located under arch/${ARCH}/configs/ directory. It works in Linux Kernel since ARCH is always given from the command line for cross compile. But in U-Boot, ARCH is not given from the command line. Which means we cannot know ARCH until the board configuration is done. That is why all the "*_defconfig" files should be gathered into a single directory ./configs/. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org>
* mx6qarm2: Remove unneeded error message when cpu_eth_init() failsFabio Estevam2014-01-13-5/+2
| | | | | | | There is no need to print an error message when cpu_eth_init() fails because net/eth.c already prints it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* i.MX6 (DQ/DLS): use macros for mux and pad declarationsEric Nelson2013-12-17-1/+1
| | | | | | | | | | | | | | | | | | | | This allows the use of either or both declarations from the files mx6q_pins.h and mx6dl_pins.h. All board files should include <asm/arch/mx6-pins.h> with one of the following defined in boards.cfg MX6Q - for boards targeting i.MX6Q or i.MX6D MX6DL - for boards targeting i.MX6DL MX6S - for boards targeting i.MX6S MX6QDL - for boards that support any of the above with run-time detection Pad declarations will be MX6_PAD_x for single-variant boards and MX6Q_PAD_x and MX6DL_PAD_x for boards supporting both processor classes. Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com> Acked-by: Stefano Babic <sbabic@denx.de>
* i.MX6DQ/DLS: replace pad names with their Linux kernel equivalentsEric Nelson2013-11-13-33/+33
| | | | Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
* board: arm: convert makefiles to Kbuild styleMasahiro Yamada2013-11-01-20/+1
| | | | | | | | | | | | Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Andreas Bießmann <andreas.devel@googlemail.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Prafulla Wadaskar <prafulla@marvell.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Vipin Kumar <vipin.kumar@st.com> Cc: Tom Warren <twarren@nvidia.com> Cc: Tom Rini <trini@ti.com>
* Add GPL-2.0+ SPDX-License-Identifier to source filesWolfgang Denk2013-07-24-48/+3
| | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
* Merge branch 'u-boot/master' into 'u-boot-arm/master'Albert ARIBAUD2013-05-30-1/+1
|\ | | | | | | | | | | Conflicts: common/cmd_fpga.c drivers/usb/host/ohci-at91.c
| * Fix references to the documentation filesAnatolij Gustschin2013-05-10-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Many boot image configuration files refer to the appropriate documentation file, but these references contain typos in the directory and file name. Fix them. Also fix reference to doc/README.SPL file. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Prafulla Wadaskar <prafulla@marvell.com> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
* | imx: iomux-v3: Include PKE and PUE to pad control pull definitionsBenoît Thébaudeau2013-04-28-9/+8
|/ | | | | | | | | | | | | | | | | PUE requires PKE to mean something, as do pull values with PUE, so do not compell users to explicitly use PKE and PUE everywhere. This is also what is done on Linux and what has already been done for i.MX51. By the way, remove some unused pad control definitions. There is no change of behavior. Note that SPI_PAD_CTRL was defined by several boards with a pull value, but without PKE or PUE, which means that no pull was actually enabled in the pad. This might be a bug in those boards, but this patch does not change the behavior, so it just removes the meaningless pull value from those definitions. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* i.MX6: consolidate pad names for multi-CPU boardsEric Nelson2013-03-07-39/+39
| | | | | | | | | | | Rename all i.MX6 pad declarations to MX6_PAD_x, so a board may support either i.MX6Quad/Dual (MX6Q) or i.MX6Dual-Lite/Solo (MX6DL) by including the proper header. Boards mx6qarm2, mx6qsabreauto, mx6qsabrelite, and mx6qsabresd only support MX6Q, so they include mx6q_pins.h. Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
* imximage.cfg: run files through C preprocessorTroy Kisky2013-01-22-42/+46
| | | | | | | | | | | | The '#' used as comments in the files cause the preprocessor trouble, so change to /* */. The mkimage command which uses this preprocessor output was moved to arch/arm/imx-common/Makefile .gitignore was updated to ignore .cfgtmp files. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
* i.MX: declare iomux_v3_cfg_t arrays as constEric Nelson2012-10-16-4/+4
| | | | Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
* mxc: Fix SDHC multi-instance clockBenoît Thébaudeau2012-10-16-0/+4
| | | | | | | | | | | | | | | | | | On mxc, each SDHC instance has a dedicated clock, so gd->sdhc_clk is not suitable for the multi-instance use case (initialization made directly with fsl_esdhc_initialize()). This patch fixes this issue by adding a configuration field for the SDHC input clock frequency. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Eric Bénard <eric@eukrea.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Jason Liu <r64343@freescale.com> Cc: Matt Sealey <matt@genesi-usa.com> Cc: Andy Fleming <afleming@gmail.com>
* fsl_esdhc: Remove cache snooping for i.MXBenoît Thébaudeau2012-09-01-2/+2
| | | | | | | | | | | | | | | The cache snooping feature of Freescale's eSDHC IP is not available on i.MX, so disable it globally for this architecture. This avoids setting no_snoop for all i.MX boards, and it prevents setting a reserved bit of a reserved register if fsl_esdhc_mmc_init() is used on i.MX, like in arch/arm/cpu/armv7/imx-common/cpu.c/cpu_mmc_init(). Since no_snoop was only used on i.MX, get rid of it BTW. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Andy Fleming <afleming@gmail.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Kim Phillips <kim.phillips@freescale.com>
* mx6qarm2:Use IMX_GPIO_NR macroAshok Kumar Reddy2012-09-01-2/+2
| | | | | | Signed-off-by: Ashok Kumar Reddy <ashokkourla2000@gmail.com> Acked-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
* i.mx: iomux-v3.h: move to imx-common include directoryTroy Kisky2012-07-31-1/+1
| | | | Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
* mx6: Avoid writing to read-only bits in imximage.cfgVikram Narayanan2012-07-07-1/+1
| | | | | If in case this is valid according to the latest datasheet, ignore this patch. Acked-by: Marek Vasut <marex@denx.de>
* mx6qarm2: Remove unused SOBJSFabio Estevam2012-07-07-4/+3
| | | | | | | | There is no .S file in this directory, so just remove SOBJS. Cc: Jason Liu <r64343@freescale.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Jason Liu <r64343@freescale.com>
* i.MX6: arm2: Add AXI cache and Qos settingDirk Behme2012-04-17-0/+6
| | | | | | | | | | | | | | | Do the same AXI cache and Qos settings done already in the SabreLite imximage.cfg for the ARM2 board, too. It fixes a display flash issue caused by low priority of the display IDMA channel. Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com> CC: Jason Chen <b02280@freescale.com> CC: Jason Liu <r64343@freescale.com> CC: Stefano Babic <sbabic@denx.de> CC: Fabio Estevam <festevam@gmail.com> Acked-by: Jason Liu <r64343@freescale.com>
* imx6: mx6qarm2: updated board_mmc_getcd() to the new prototypeStefano Babic2012-02-12-4/+5
| | | | | | | | | | | | Commit 314284b1567f1ce29c19060641e7f213146f7ab8 has changed board_mmc_getcd() function prototype, while mx6qarm2 has still the old one. Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Jason Liu <jason.hui@linaro.org> Acked-by: Dirk Behme <dirk.behme@de.bosch.com> Acked-by: Jason Liu <jason.hui@linaro.org> Tested-by: Jason Liu <jason.hui@linaro.org>
* i.mx6q: mx6qarm2: Enable the usboh3 clockEric Nelson2012-01-16-1/+1
| | | | | | | | | Bits 0 and 1 of CCM_CCGR7 are the usboh3 clock enable bits. Enabling this clock is necessary for the USB download. Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com> CC: Jason Hui <jason.hui@linaro.org> Acked-by: Jason Hui <jason.hui@linaro.org>
* i.mx6q: arm2: Add the enet function supportJason Liu2012-01-16-0/+90
| | | | | | | | | This enable the network function on the i.mx6q armadillo2 board(arm2), thus we can use tftp to load image from network. Cc: Stefano Babic <sbabic@denx.de> Signed-off-by: Jason Liu <jason.hui@linaro.org> Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
* i.mx: i.mx6q: add the initial support for i.mx6q ARM2 boardJason Liu2011-12-09-0/+364
Add the initial support for Freescale i.MX6Q Armadillo2 board Support: MMC boot from slot 0/1, debug UART(UART4), usdhc. There is two MMC slots on the boards: mmc dev 0 -> connect USDHC3 -> the lower slot on the board, mmc dev 1 -> connect USDHC4 -> the upper slot on the board, Signed-off-by: Jason Liu <jason.hui@linaro.org> Cc: Stefano Babic <sbabic@denx.de> Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
generated by cgit v1.1 at 2024-08-21 08:16:34 +0000