summaryrefslogtreecommitdiff
path: root/board/freescale/mpc8610hpcd
Commit message (Collapse)AuthorAgeLines
...
* Clean up diufb command definitionsPeter Tyser2009-01-28-1/+1
| | | | | | | The diufb command usage formatting is non-standard. It was made standard in preparation for larger command usage updates. Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
* fsl-ddr: use the 1T timing as default configurationDave Liu2009-01-23-0/+3
| | | | | | | | | For light loaded system, we use the 1T timing to gain better memory performance, but for some heavily loaded system, you have to add the 2T timing options to board files. Signed-off-by: Dave Liu <daveliu@freescale.com> Acked-by: Andy Fleming <afleming@freescale.com>
* mpc8610hpcd: Fix PCI mapping conceptsBecky Bruce2009-01-13-8/+8
| | | | | | | | | Rename _BASE to _BUS, as it's actually a PCI bus address, separate virtual and physical addresses into _VIRT and _PHYS, and use each appopriately. This makes the code easier to read and understand, and facilitates mapping changes going forward. Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
* Align end of bss by 4 bytesSelvamuthukumar2008-11-18-0/+1
| | | | | | | | | | Most of the bss initialization loop increments 4 bytes at a time. And the loop end is checked for an 'equal' condition. Make the bss end address aligned by 4, so that the loop will end as expected. Signed-off-by: Selvamuthukumar <selva.muthukumar@e-coninfotech.com> Signed-off-by: Wolfgang Denk <wd@denx.de>
* Merge commit 'wd/master'Jon Loeliger2008-11-10-1/+1
|\
| * Coding Style cleanup, update CHANGELOGWolfgang Denk2008-11-02-1/+1
| | | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* | 86xx: Make dram_size a phys_size_tBecky Bruce2008-11-03-3/+3
|/ | | | | | It's currently a long and should be phys_size_t. Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
* 86xx: remove the unused ddr_enable_ecc in the board fileDave Liu2008-10-30-11/+0
| | | | | | | | | The DDR controller of 86xx processors have the ECC data init feature, and the new DDR code is using the feature, we don't need the way with DMA to init memory again. Signed-off-by: Dave Liu <daveliu@freescale.com> Acked-by: Kumar Gala <kumar.gala@freescale.com>
* 86xx: Convert all fsl_pci_init users to new APIsKumar Gala2008-10-24-54/+24
| | | | | | | | | | | | Converted MPC8610HCPD, MPC8641HPCN, and SBC8641D to use fsl_pci_setup_inbound_windows() and ft_fsl_pci_setup(). With these changes the board code is a bit smaller and we get dma-ranges set in the device tree for these boards. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com> Acked-by: Jon Loeliger <jdl@freescale.com>
* Pass dimm parameters to populate populate controller optionsHaiying Wang2008-10-18-1/+4
| | | | | | | | | | | | | Because some dimm parameters like n_ranks needs to be used with the board frequency to choose the board parameters like clk_adjust etc. in the board_specific_paramesters table of the board ddr file, we need to pass the dimm parameters to the board file. * move ddr dimm parameters header file from /cpu to /include directory. * add ddr dimm parameters to populate board specific options. * Fix fsl_ddr_board_options() for all the 8xxx boards which call this function. Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
* rename CFG_ macros to CONFIG_SYSJean-Christophe PLAGNIOL-VILLARD2008-10-18-47/+47
| | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* Introduce netdev.h header file and remove externsBen Warren2008-09-02-6/+2
| | | | | | | This addresses all drivers whose initializers have already been moved to board_eth_init()/cpu_eth_init(). Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* Moved initialization of ULI526X Ethernet driver to board code.Ben Warren2008-08-26-0/+10
| | | | | | | The only board using this driver is the Freescale MPC8610HPCD board. Removed initialization for the driver from net/eth.c Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* FSL DDR: Convert MPC8610HPCD to new DDR code.Jon Loeliger2008-08-27-6/+86
| | | | | Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Fix some more print() format errors.Wolfgang Denk2008-07-11-2/+2
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* Merge commit 'wd/master'Jon Loeliger2008-07-10-1/+1
|\
| * Cleanup out-or-tree building for some boards (.depend)Wolfgang Denk2008-07-02-1/+1
| | | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* | MPC8610HPCD: Report board id, board version and fpga version.Kumar Gala2008-06-19-1/+4
|/ | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Change initdram() return type to phys_size_tBecky Bruce2008-06-12-1/+1
| | | | | | | | | | | | | | | | | | | This patch changes the return type of initdram() from long int to phys_size_t. This is required for a couple of reasons: long int limits the amount of dram to 2GB, and u-boot in general is moving over to phys_size_t to represent the size of physical memory. phys_size_t is defined as an unsigned long on almost all current platforms. This patch *only* changes the return type of the initdram function (in include/common.h, as well as in each board's implementation of initdram). It does not actually modify the code inside the function on any of the platforms; platforms which wish to support more than 2GB of DRAM will need to modify their initdram() function code. Build tested with MAKEALL for ppc, arm, mips, mips-el. Booted on powerpc MPC8641HPCN. Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
* Merge branch 'master' of git://www.denx.de/git/u-boot-mpc85xxWolfgang Denk2008-06-11-9/+9
|\ | | | | | | | | | | | | | | Conflicts: include/asm-ppc/fsl_lbc.h Signed-off-by: Wolfgang Denk <wd@denx.de>
| * 85xx/86xx: Move to dynamic mgmt of LAWsKumar Gala2008-06-11-9/+9
| | | | | | | | | | | | | | | | | | | | | | With the new LAW interface (set_next_law) we can move to letting the system allocate which LAWs are used for what purpose. This makes life a bit easier going forward with the new DDR code. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Andy Fleming <afleming@freescale.com> Acked-by: Jon Loeliger <jdl@freescale.com> Acked-by: Becky Bruce <becky.bruce@freescale.com>
* | Merge commit 'wd/master'Jon Loeliger2008-06-06-0/+20
|\ \ | |/
| * Move pixel clock setting to board fileYork Sun2008-05-21-0/+20
| | | | | | | | | | | | | | The clock divider has different format in 5121 and 8610. This patch moves it to board specific code. Signed-off-by: York Sun <yorksun@freescale.com>
* | mpc86xx: Removed unused and unconfigured memory test code.Jon Loeliger2008-05-19-36/+0
|/ | | | | | Besides, other common code exists. Signed-off-by: Jon Loeliger <jdl@freescale.com>
* MPC8610HPCD: Drop -O2 from the build flagsKumar Gala2008-05-03-1/+1
| | | | | | Make the flags use -Os like all other boards Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 85xx/86xx: Rename ext_refrec to timing_cfg_3 to match docsKumar Gala2008-04-29-1/+1
| | | | | | | All the 85xx and 86xx UM describe the register as timing_cfg_3 not as ext_refrec. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* FSL: Clean up board/freescale/common/MakefileJon Loeliger2008-03-26-4/+0
| | | | | | | | | | | | | | | Each file that can be built here now follows some CONFIG_ option so that they are appropriately built or not, as needed. And CONFIG_ defines were added to various board config files to make sure that happens. The other board/freescale/*/Makefiles no longer need to reach up and over into ../common to build their individually needed files any more. Boards that are CDS specific were renamed with cds_ prefix. Signed-off-by: Jon Loeliger <jdl@freescale.com>
* Remove erroneous or extra spd.h #includers.Jon Loeliger2008-03-05-5/+1
| | | | | | | | | | Many of the spd.h #includers don't need it, and wanted to have spd_sdram() declared instead. Since they didn't get that, some also had open coded extern declarations of it instead or as well. Fix it all up by using spd_sdram.h where needed. Signed-off-by: Jon Loeliger <jdl@freescale.com>
* 86xx: Fix GUR PCI config registers properly.Jon Loeliger2008-02-20-2/+4
| | | | | | | | | | | | | | Back in commit 975a083a5ef785c414b35f9c5b8ae25b26b41524 where I tried to "8610HPCD: Fix typos in two PCI setup registers", I botched it due to not realizing that 8610 and 8641 had different Global Utility Register defintions, one of which was like 85xx, and the other wasn't. Correct this problem by introducing two symbols, one for each 86xx SoC, but neither of which is named anything like 85xx. My bad. Lovely Wednesday with git bisect. You know. Signed-off-by: Jon Loeliger <jdl@freescale.com>
* 8610HPCD: Fix typos in two PCI setup registers.Jon Loeliger2008-02-19-3/+2
| | | | | | | | | The two symbols MPC86xx_PORDEVSR_IO_SEL and MPC86xx_PORBMSR_HA were erroneously present as 85xx names and values, leftover from the clone wars. Fix this by removing the 85xx cruft from the 86xx codebase. Signed-off-by: Jon Loeliger <jdl@freescale.com>
* 86xx: Remove old-style law setup codeBecky Bruce2008-01-24-150/+0
| | | | | | This includes mpc8610hpcd, mpc8641hpcn, and sbc8641d. Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
* 86xx: Convert mpc8610hpcd to new law setup method.Becky Bruce2008-01-24-1/+45
| | | | Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
* FSL: Convert board/freescale/common/Makefile to use CONFIG_Jon Loeliger2008-01-16-6/+6
| | | | | | | | | | | | | | | | Convert the board/freescale/common/Makefile to use CONFIG_* options to select which files to conditionally compile into the board/freescale/common library rather than conditionally compiling entire files. Now handles:: CONFIG_FSL_PIXIS CONFIG_FSL_DIU_FB CONFIG_PQ_MDS_PIB CONFIG_ID_EEPROM is introduced until CFG_ID_EEPROM is gone. Signed-off-by: Jon Loeliger <jdl@freescale.com>
* Fix linker scripts: add NOLOAD atribute to .bss/.sbss sectionsWolfgang Denk2008-01-12-1/+1
| | | | | | | | | | | | | | | | | | | With recent toolchain versions, some boards would not build because or errors like this one (here for ocotea board when building with ELDK 4.2 beta): ppc_4xx-ld: section .bootpg [fffff000 -> fffff23b] overlaps section .bss [fffee900 -> fffff8ab] For many boards, the .bss section is big enough that it wraps around at the end of the address space (0xFFFFFFFF), so the problem will not be visible unless you use a 64 bit tool chain for development. On some boards however, changes to the code size (due to different optimizations) we bail out with section overlaps like above. The fix is to add the NOLOAD attribute to the .bss and .sbss sections, telling the linker that .bss does not consume any space in the image. Signed-off-by: Wolfgang Denk <wd@denx.de>
* Convert MPC8610HPCD to use libfdt.Jon Loeliger2008-01-09-33/+40
| | | | | | | | | Assumes the presence of the aliases node in the DTS to locate the pci and serial nodes for fixups. Use consistent fdtaddr and fdtfile in environment variables. Signed-off-by: Jon Loeliger <jdl@freescale.com>
* 8610: Fix lingering compile warnings.Jon Loeliger2008-01-09-1/+4
| | | | | | Turn off DEBUG. Signed-off-by: Jon Loeliger <jdl@freescale.com>
* 8610: Move include of config.h earlier.Jon Loeliger2008-01-03-1/+1
| | | | | | | | Include config.h earlier in the set of #includes so as to avoid a incidental and duplicate definition of CFG_CACHELINE_SIZE. Signed-off-by: Jon Loeliger
* 8610: Add console frame buffer support to FSL 8610 DIU driver.York Sun2007-11-07-3/+75
| | | | | | | | | | | | | | | | Add cfb console support to FSL 8610 DIU driver. Inspect board version from PIXIS to obtain correct pixel format. Use #define CONFIG_VIDEO in config file to enable fb console. To switch monitor, set monitor variable to 0 - DVI, 1 - Single link LVDS, 2 - Double link LVDS followed by "diufb init". Preserve logo bitmap at the top of the fb console. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com>
* 8610: Add 8610 DIU display driverYork Sun2007-11-07-4/+150
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1280x1024 and 1024x768 @ 32 bpp are supported now. DVI, Single-link LVDS, Double-link LVDS are all supported. Environmental variable "monitor" is used to specify monitor port. A new command "diufb" is introduced to reinitialize monitor and display a BMP file in the memory. So far, 1-bit, 4-bit, 8-bit and 24-bit BMP formats are supported. diufb init - initialize the diu driver Enable the port specified in the environmental variable "monitor" diufb addr - display bmp file in memory. The bmp image should be no bigger than the resolution, 1280x1024 for DVI and double-link LVDS, 1024x768 for single-link LVDS. Note, this driver allocate memory but doesn't free it after use It is written on purpose -- to avoid a failure of reallocation due to memory fragement. ECC of DDR is disabled for DIU performance. L2 data cache is also disabled. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Jon loeliger <jdl@freescale.com>
* Initial mpc8610hpcd board files.Jon Loeliger2007-10-17-0/+871
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com> Signed-off-by: Jason Jin <Jason.jin@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com>