summaryrefslogtreecommitdiff
path: root/board/freescale/mpc8568mds
Commit message (Collapse)AuthorAgeLines
* Remove erroneous or extra spd.h #includers.Jon Loeliger2008-03-05-3/+1
| | | | | | | | | | Many of the spd.h #includers don't need it, and wanted to have spd_sdram() declared instead. Since they didn't get that, some also had open coded extern declarations of it instead or as well. Fix it all up by using spd_sdram.h where needed. Signed-off-by: Jon Loeliger <jdl@freescale.com>
* 85xx: Convert MPC8568 MDS to new TLB setupKumar Gala2008-01-17-183/+101
| | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 85xx: Use proper defines for PCI addressesKumar Gala2008-01-16-4/+4
| | | | | | | | We should be using the _MEM_PHYS for LAW and TLB setup and not _MEM_BASE. While _MEM_BASE & _MEM_PHYS are normally the same, _MEM_BASE should only be used for configuring the PCI ATMU. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 85xx: convert remaining 85xx boards over to use new LAW init codeKumar Gala2008-01-16-59/+63
| | | | | | | Converted ATUM8548, MPC8568 MDS, MPC8540 EVAL, and TQM85xx boards over to use new LAW init code. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Fix linker scripts: add NOLOAD atribute to .bss/.sbss sectionsWolfgang Denk2008-01-12-1/+1
| | | | | | | | | | | | | | | | | | | With recent toolchain versions, some boards would not build because or errors like this one (here for ocotea board when building with ELDK 4.2 beta): ppc_4xx-ld: section .bootpg [fffff000 -> fffff23b] overlaps section .bss [fffee900 -> fffff8ab] For many boards, the .bss section is big enough that it wraps around at the end of the address space (0xFFFFFFFF), so the problem will not be visible unless you use a 64 bit tool chain for development. On some boards however, changes to the code size (due to different optimizations) we bail out with section overlaps like above. The fix is to add the NOLOAD attribute to the .bss and .sbss sections, telling the linker that .bss does not consume any space in the image. Signed-off-by: Wolfgang Denk <wd@denx.de>
* MPC8568E-MDS: set up QE pario for UART1Anton Vorontsov2008-01-09-0/+7
| | | | | | | To use UART1 on the MPC8568E-MDS, QE pario pins PC[0:3] should be set up appropriately. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
* MPC8568E-MDS: reset UCCs to use them reliablyAnton Vorontsov2008-01-09-0/+33
| | | | | | | | | | In order to use GETH1 and GETH2 on the MPC8568E-MDS, we should reset UCCs. p.s Similar code exists in the Linux kernel board file (for capability reasons with older U-Boots), but should be removed some day. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
* Reworked FSL Book-E TLB macros to be more readableKumar Gala2008-01-09-56/+48
| | | | | | | | | | | The old macros made it difficult to know what WIMGE and perm bits were set for a TLB entry. Actually use the bit masks for these items since they are only a single bit. Also moved the macros into mmu.h out of e500.h since they aren't specific to e500. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Move the MPC8568 MDS board under board/freescale.Kumar Gala2007-12-11-0/+1193
Minor path corrections needed to ensure buildability. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
generated by cgit v1.1 at 2024-12-12 12:27:59 +0000