summaryrefslogtreecommitdiff
path: root/board/freescale/ls2080ardb
Commit message (Collapse)AuthorAgeLines
* NXP: Introduce board/freescale/common/Kconfig and migrate CHAIN_OF_TRUSTTom Rini2017-01-24-0/+2
| | | | | | | | | Introduce board/freescale/common/Kconfig so that we have a single place for CONFIG options that are shared between ARM and PowerPC NXP platforms. Cc: York Sun <york.sun@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: York Sun <york.sun@nxp.com>
* fsl/board/ddr: optimize board-specific cpo for erratum A-009942Shengzhou Liu2016-12-15-0/+3
| | | | | | | | | | Optimize board-specific cpo for erratum A-009942 on b4860qds, ls1043aqds, ls1043ardb, ls1046aqds, ls1046ardb, ls2080ardb, t102xqds, t102xrdb, t1040qds, t104xrdb, t208xqds, t208xrdb, t4qds, t4rdb boards. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* armv8: fsl-layerscape: Add NXP LS2088A SoC supportPriyanka Jain2016-11-22-5/+5
| | | | | | | | | | | | The QorIQ LS2088A SoC is built on layerscape architecture. It is similar to LS2080A SoC with some differences like 1)Timer controller offset is different 2)It has A72 cores 3)It supports TZASC module Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* ls2080ardb: Reserve DP-DDR RAMAlexander Graf2016-11-17-0/+9
| | | | | | | | The DP-DDR shouldn't be exposed as conventional memory to an OS, so let's rather claim it's a reserved region in the EFI memory map Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: York Sun <york.sun@nxp.com>
* ls2080: Exit dpaa only right before exiting U-BootAlexander Graf2016-11-17-6/+5
| | | | | | | | | | | | | | | | | | | | | On ls2080 we have a separate network fabric component which we need to shut down before we enter Linux (or any other OS). Along with that also comes configuration of the fabric using a description file. Today we always stop and configure the fabric in the boot script and (again) exit it on device tree generation. This works ok for the normal booti case, but with bootefi the payload we're running may still want to access the network. So let's add a new fsl_mc command that defers configuration and stopping the hardware to when we actually exit U-Boot, so that we can still use the fabric from an EFI payload. For existing boot scripts, nothing should change with this patch. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: York Sun <york.sun@nxp.com> [agraf: Fix x86 build]
* usb: fsl: Rename fdt_fixup_dr_usbSriram Dash2016-09-27-1/+1
| | | | | | | | The function fdt_fixup_dr_usb is specific to fsl/nxp. So, make the function name explicit and rename fdt_fixup_dr_usb into fsl_fdt_fixup_dr_usb. Signed-off-by: Sriram Dash <sriram.dash@nxp.com>
* armv8: ls2080a: Remove debug server supportYork Sun2016-09-14-4/+0
| | | | | | Debug server feature has been dropped from roadmap. Signed-off-by: York Sun <york.sun@nxp.com>
* armv8: Move secure_ram variable out of generic global dataYork Sun2016-07-15-7/+8
| | | | | | | Secure_ram variable was put in generic global data. But only ARMv8 uses this variable. Move it to ARM specific data structure. Signed-off-by: York Sun <york.sun@nxp.com>
* Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini2016-06-18-0/+2
|\ | | | | | | | | | | | | Signed-off-by: Tom Rini <trini@konsulko.com> Conflicts: arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
| * usb: xhci: fsl: Add workaround for USB erratum A008751Sriram Dash2016-06-13-0/+2
| | | | | | | | | | | | | | | | | | This patch is doing the following: 1. Implementing the errata for LS2080. 2. Adding fixup for fdt for LS2080. Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
* | board: ls2080a: Add "mcinitcmd" env for MC & DPL deploymentPratiyush Mohan Srivastava2016-06-10-0/+5
|/ | | | | | | | | | | | Environment variable mcinitcmd is defined to initiate MC and DPL deployment from the location where it is stored (NOR, NAND, SD, SATA, USB) during booting. If this variable is not defined then macro MC_BOOT_ENV_VAR will be null and MC will not be booted and DPL will not be applied during U-boot booting. Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* armv8: fsl-layerscape: Organize SoC overview at common locationPrabhakar Kushwaha2016-06-03-42/+3
| | | | | | | | | | SoC overviews are getting repeated across board folders. So, Organize SoC overview at common location i.e. fsl-layerscape/doc Also move README.lsch2 and README.lsch3 in same folder. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* board: ls2080ardb: qds: Fix compiling issue when FSL_MC_ENET not definedYork Sun2016-06-03-0/+6
| | | | | | | U-Boot should continue to work without management complex (MC). Fix compiling errors and warnings. Signed-off-by: York Sun <york.sun@nxp.com>
* board/freescale: Update ddr clk_adjustShengzhou Liu2016-06-03-16/+16
| | | | | | | | | This patch updates clk_adjust to actual value for boards with T-series and LS-series SoCs to match the setting of clk_adjust in latest ddr driver. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* armv8: ls2080a: Update MAINTAINERS filePrabhakar Kushwaha2016-05-17-1/+1
| | | | | | | Update MAINTAINERS file for ls2080aqds and ls2080ardb platforms. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* armv8/ls2080ardb: Update DDR timing to support more UDIMMsShengzhou Liu2016-05-17-3/+3
| | | | | | | | | | | | | | Optimize DDR timing for good margins to support new Transcend and Apacer DDR4 UDIMM besides current Micron UDIMM. Verified 1333MT/s, 1600MT/s, 1866MT/s, 2133MT/s rate with following UDIMM on LS2080ARDB. - Micron UDIMM: MTA18ASF1G72AZ-2G1A1Z - Apacer UDIMM: 78.C1GM4.AF10B - Transcend UDIMM: TS1GLH72V1H Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* armv8: LS2080A: Consolidate LS2080A and LS2085AYork Sun2016-04-06-16/+16
| | | | | | | | | | | | LS2080A is the primary SoC, and LS2085A is a personality with AIOP and DPAA DDR. The RDB and QDS boards support both personality. By detecting the SVR at runtime, a single image per board can support both SoCs. It gives users flexibility to swtich SoC without the need to reprogram the board. Signed-off-by: York Sun <york.sun@nxp.com> CC: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
* armv8/ls2080ardb: Enable VID supportRai Harninder2016-03-29-0/+9
| | | | | | | | This patch enable VID support for ls2080ardb platform. It uses the common VID driver. Signed-off-by: Rai Harninder <harninder.rai@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* armv8: ls2080rdb: ls2080qds: Add secure boot supportSaksham Jain2016-03-29-1/+10
| | | | | | | | | | Sec_init has been called at the beginning to initialize SEC Block (CAAM) which is used by secure boot validation later for both ls2080a qds and rdb. 64-bit address in ESBC Header has been enabled. Secure boot defconfigs are created for boards (NOR boot). Signed-off-by: Saksham Jain <saksham.jain@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* armv8: ls2080a: Update fdt path for fsl-mc nodeStuart Yoder2016-03-24-2/+2
| | | | | | | | | | | | The fsl-mc node has been moved under /soc, so update the path references accordingly. Backwards compatibility is retained for /fsl-mc. Delete backwards compatibility for the completely obsolete /fsl,dprc@0. Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* armv8: ls2085a: Remove phy configuration from QDS and RDBPrabhakar Kushwaha2016-03-21-39/+0
| | | | | | | | | As phy_connect and phy_config are being called from DPAA2 driver. Remove calling of mentioned function from board file. Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* armv8: ls2080ardb: invert irq pins polarity for AQR405 PHYShaohui Xie2016-03-21-0/+4
| | | | | | | | | To use AQR405 PHY's interrupt, we need to invert the relative IRQ pins polarity by setting IRQCR register, because AQR405 interrupt is low active but GIC accepts high active. Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* Use correct spelling of "U-Boot"Bin Meng2016-02-06-1/+1
| | | | | | | | | | Correct spelling of "U-Boot" shall be used in all written text (documentation, comments in source files etc.). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
* armv8: fsl-layerscale: Rewrite reserving memory for MC and debug serverYork Sun2015-12-15-17/+0
| | | | | | | | | | | MC and debug server are not board-specific. Move reserving memory to SoC file, using the new board_reserve_ram_top function. Reduce debug server memory by 2MB to make room for secure memory. In the system with MC and debug server, the top of u-boot memory is not the end of memory. PRAM is not used for this reservation. Signed-off-by: York Sun <yorksun@freescale.com>
* armv8: fsl-layerscape: Make DDR non secure in MMU tablesYork Sun2015-12-15-0/+15
| | | | | | | | | | | | | | | | | | | DDR has been set as secure in MMU tables. Non-secure master such as SDHC DMA cannot access data correctly. Mixing secure and non- secure MMU entries requirs the MMU tables themselves in secure memory. This patch moves MMU tables into a secure DDR area. Early MMU tables are changed to set DDR as non-secure. A new table is added into final MMU tables so secure memory can have 2MB granuality. gd->secure_ram tracks the location of this secure memory. For ARMv8 SoCs, the RAM base is not zero and RAM is divided into several banks. gd->secure_ram needs to be maintained before using. This maintenance is board-specific, depending on the SoC and memory bank of the secure memory falls into. Signed-off-by: York Sun <yorksun@freescale.com>
* armv8/ls2080ardb: Update DDR settings for four chip-select caseYork Sun2015-12-13-4/+12
| | | | | | | When 4 chip-selects are used, vref should use range 1 and CDT uses 80 ohm, and 2T timing is enabled. Signed-off-by: York Sun <yorksun@freescale.com>
* armv8: ls2085a: Add support of LS2085A SoCPrabhakar Kushwaha2015-11-30-0/+2
| | | | | | | | | | | | | Freescale's LS2085A is a another personality of LS2080A SoC with support of AIOP and DP-DDR. This Patch adds support of LS2085A Personality. Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> [York Sun: Updated MAINTAINERS files Dropped #ifdef in cpu.h Add CONFIG_SYS_NS16550=y in defconfig] Reviewed-by: York Sun <yorksun@freescale.com>
* armv8: LS2080A: Rename LS2085A to reflect LS2080APrabhakar Kushwaha2015-11-30-0/+931
LS2080A is a prime personality of Freescale’s LS2085A. It is a non-AIOP personality without support of DP-DDR, L2 switch, 1588, PCIe endpoint etc. So renaming existing LS2085A code base to reflect LS2080A (Prime personality) Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> [York Sun: Dropped #ifdef in cpu.c for cpu_type_list] Reviewed-by: York Sun <yorksun@freescale.com>
generated by cgit v1.1 at 2024-07-07 21:19:49 +0000