summaryrefslogtreecommitdiff
path: root/board/amcc/sequoia
Commit message (Collapse)AuthorAgeLines
...
| * ppc4xx: Update Sequoia NAND booting support with ECCStefan Roese2007-06-01-0/+4
| | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de>
* | ppc4xx: Undo Sequoia patch for dynamic EBC speed support of 83MHzStefan Roese2007-06-01-6/+0
| | | | | | | | | | | | | | | | This patch undoes the patch by Jeff Mann with commit-id ada4697d. As suggested by AMCC it is not recommended to dynamically change the EBC speed after bootup. So we undo this change to be on the safe side. Signed-off-by: Stefan Roese <sr@denx.de>
* | [PATCH] Run new sequoia boards with an EBC speed of 83MHzJeffrey Mann2007-05-16-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Because the Sequoia board does not boot with an EBC faster than 66MHz, the clock divider are changed after the initial boot process. This allows for maximum clocking speeds to be achieved on newer boards. Sequoia boards with 666.66 MHz processors require that the EBC divider be set to 3 in order to start the initial boot process at a slower EBC speed. After the initial boot process, the divider can be set back to 2, which will cause the boards to run at 83.333MHz. This is backward compatible with boards with 533.33 MHz processors, as these boards will already be set with an EBC divider of 2. Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
* | ppc4xx: Sequoia: Remove cpu/ppc4xx/speed.c from NAND bootingStefan Roese2007-05-05-1/+9
|/ | | | | | | | Using cpu/ppc4xx/speed.c to calculate the bus frequency is too big for the 4k NAND boot image so define bus_frequency to 133MHz here which is save for the refresh counter setup. Signed-off-by: Stefan Roese <sr@denx.de>
* Merge with /home/stefan/git/u-boot/acadiaStefan Roese2007-03-24-2/+2
|\
| * [PATCH] Small Sequoia cleanupStefan Roese2007-03-24-2/+2
| | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de>
* | ppc4xx: Fix file mode of sequoia.cStefan Roese2007-03-08-0/+0
| | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de>
* | ppc4xx: Clear Sequoia/Rainier security engine reset bitsJohn Otken john@softadvances.com2007-03-08-0/+4
| | | | | | | | Signed-off-by: John Otken john@softadvances.com <john@softadvances.com>
* | [PATCH] Speed optimization of AMCC Sequoia/Rainier DDR2 setupStefan Roese2007-03-06-8/+13
|/ | | | | | | | | | | | | | As provided by the AMCC applications team, this patch optimizes the DDR2 setup for 166MHz bus speed. The values provided are also save to use on a "normal" 133MHz PLB bus system. Only the refresh counter setup has to be adjusted as done in this patch. For this the NAND booting version had to include the "speed.c" file from the cpu/ppc4xx directory. With this addition the NAND SPL image will just fit into the 4kbytes of program space. gcc version 4.x as provided with ELDK 4.x is needed to generate this optimized code. Signed-off-by: Stefan Roese <sr@denx.de>
* Merge with /home/hs/SC3/u-bootWolfgang Denk2007-01-15-3/+0
|\ | | | | | | Some code cleanup.
* | [PATCH] Update Sequoia (440EPx) to display board rev and PCI bus speedStefan Roese2007-01-13-0/+7
| | | | | | | | | | | | | | Now the board revision and the current PCI bus speed are printed after the board message. Signed-off-by: Stefan Roese <sr@denx.de>
* | [PATCH] Clear PLB4A0_ACR[WRP] on Sequoia (440EPx)Stefan Roese2007-01-05-3/+12
| | | | | | | | | | | | | | This fix will make the MAL burst disabling patch for the Linux EMAC driver obsolete. Signed-off-by: Stefan Roese <sr@denx.de>
* | [PATCH] Add DDR2 optimization code for Sequoia (440EPx) boardStefan Roese2007-01-05-10/+866
|/ | | | | | | | | | This code will optimize the DDR2 controller setup on a board specific basis. Note: This code doesn't work right now on the NAND booting image for the Sequoia board, since it doesn't fit into the 4kBytes for the SPL image. Signed-off-by: Stefan Roese <sr@denx.de>
* [PATCH] Fix sequoia flash autodetection (finally correct)Stefan Roese2006-12-22-3/+11
| | | | | | | Now 32MByte and 64MByte FLASH is know to work and other configurations should work too. Signed-off-by: Stefan Roese <sr@denx.de>
* Fix sequoia separate object direcory building problems.Marian Balakowicz2006-10-23-2/+1
|
* Move "ar" flags to config.mk to allow for silent "make -s"Wolfgang Denk2006-10-09-1/+1
| | | | Based on patch by Mike Frysinger, 20 Jun 2006
* Coding style cleanupWolfgang Denk2006-10-09-36/+36
|
* Fix reset problem in sequoia sdram init codeStefan Roese2006-10-04-6/+0
| | | | Patch by Stefan Roese, 23 Sep 2006
* Add support for AMCC Rainier PPX440GRx eval boardStefan Roese2006-09-13-0/+8
| | | | Patch by Stefan Roese, 13 Sep 2006
* Add NAND environment support for PPC440EPx Sequoia NAND boot configStefan Roese2006-09-12-1/+7
| | | | Patch by Stefan Roese, 12 Sep 2006
* Add support for AMCC Sequoia PPC440EPx eval boardStefan Roese2006-09-07-0/+1228
- Add support for PPC440EPx & PPC440GRx - Add support for PPC440EP(x)/GR(x) NAND controller in cpu/ppc4xx directory - Add NAND boot functionality for Sequoia board, please see doc/README.nand-boot-ppc440 for details - This Sequoia NAND image doesn't support environment in NAND for now. This will be added in a short while. Patch by Stefan Roese, 07 Sep 2006
generated by cgit v1.1 at 2024-11-07 05:36:14 +0000