summaryrefslogtreecommitdiff
path: root/board/amcc/sequoia/sequoia.c
Commit message (Collapse)AuthorAgeLines
* ppc4xx: Add Sequoia RAM-booting targetStefan Roese2009-06-12-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds another build target for the AMCC Sequoia PPC440EPx eval board. This RAM-booting version is targeted for boards without NOR FLASH (NAND booting) which need a possibility to initially program their NAND FLASH. Using a JTAG debugger (e.g. BDI2000/3000) configured to setup the SDRAM, this debugger can load this RAM- booting image to the target address in SDRAM (in this case 0x1000000) and start it there. Then U-Boot's standard NAND commands can be used to program the NAND FLASH (e.g. "nand write ..."). Here the commands to load and start this image from the BDI2000: 440EPX>reset halt 440EPX>load 0x1000000 /tftpboot/sequoia/u-boot.bin 440EPX>go 0x1000000 Please note that this image automatically scans for an already initialized SDRAM TLB (detected by EPN=0). This TLB will not be cleared. This TLB doesn't need to be TLB #0, this RAM-booting version will detect it and preserve it. So booting via BDI2000 will work and booting with a complete different TLB init via U-Boot works as well. Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Fixup chip-selects in dtb for NAND-booting SequoiaStefan Roese2009-04-16-2/+56
| | | | | | | | | | | | | | | | | | | | Currently the NOR & NAND support in Linux only works for the "standard" Sequoia, the version booting for NOR flash. The NAND-booting version has the chip-selects swapped. Here the chip-select mappings: "Standard" NOR-booting version: CS0 NOR CS3 NAND NAND-booting version: CS0 NAND CS3 NOR With this path the dtb gets fixed-up, so that the correct chip-select numbers are patched in the dtb enabling correct NOR & NAND support in Linux on the NAND-booting Sequoia version. Signed-off-by: Stefan Roese <sr@denx.de>
* rename CFG_ macros to CONFIG_SYSJean-Christophe PLAGNIOL-VILLARD2008-10-18-19/+19
| | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* rename CFG_ENV macros to CONFIG_ENVJean-Christophe PLAGNIOL-VILLARD2008-09-10-2/+2
| | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* rename CFG_ENV_IS_IN_FLASH in CONFIG_ENV_IS_IN_FLASHJean-Christophe PLAGNIOL-VILLARD2008-09-10-1/+1
| | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* Merge branch 'master' of /home/stefan/git/u-boot/u-boot into nextStefan Roese2008-08-12-0/+5
|\
| * ppc4xx: Sequoia has two UARTs in "4-pin" mode. Configure the GPIOs as per ↵Steven A. Falco2008-08-07-0/+5
| | | | | | | | | | | | | | | | | | | | | | schematic. The Sequoia board has two UARTs in "4-pin" mode. This patch modifies the GPIO configuration to match the schematic, and also sets the SDR0_PFC1 register to select the corresponding mode for the UARTs. Signed-off-by: Steven A. Falco <sfalco@harris.com> Signed-off-by: Stefan Roese <sr@denx.de>
| * ppc4xx: Remove redundant ft_board_setup() functions from some 4xx boardsStefan Roese2008-07-13-21/+0
| | | | | | | | | | | | | | | | | | This patch removes some ft_board_setup() functions from some 4xx boards. This can be done since we now have a default weak implementation for this in cpu/ppc4xx/fdt.c. Only board in need for a different/custom implementation like canyonlands need their own version. Signed-off-by: Stefan Roese <sr@denx.de>
* | ppc4xx: Consolidate PPC4xx UIC definesStefan Roese2008-07-11-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This 2nd patch now removes all UIC mask bit definition. They should be generated from the vectors by using the UIC_MASK() macro from now on. This way only the vectors need to get defined for new PPC's. Also only the really used interrupt vectors are now defined. This makes definitions for new PPC versions easier and less error prone. Another part of this patch is that the 4xx emac driver got a little cleanup, since now the usage of the interrupts is clearer. Signed-off-by: Stefan Roese <sr@denx.de>
* | ppc4xx: Consolidate PPC4xx UIC definesStefan Roese2008-07-11-2/+1
| | | | | | | | | | | | | | | | | | This patch is the first step to consolidate the UIC related defines in the 4xx headers. Move header from asm-ppc/ppc4xx-intvec.h to asm-ppc/ppc4xx-uic.h as it will hold all UIC related defines in the next steps. Signed-off-by: Stefan Roese <sr@denx.de>
* | ppc4xx: Remove redundant ft_board_setup() functions from some 4xx boardsStefan Roese2008-07-11-21/+0
|/ | | | | | | | | This patch removes some ft_board_setup() functions from some 4xx boards. This can be done since we now have a default weak implementation for this in cpu/ppc4xx/fdt.c. Only board in need for a different/custom implementation like canyonlands need their own version. Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Remove implementations of testdram()Stefan Roese2008-06-03-38/+0
| | | | | | | This patch removes the used testdram() implementations of the board that are maintained by myself. Signed-off-by: Stefan Roese <sr@denx.de>
* PPC440EPx: Optionally enable second I2C busMike Nuss2008-02-16-1/+4
| | | | | | | | | The option CONFIG_I2C_MULTI_BUS does not have any effect on Sequoia, the PPC440EPx reference platform, because IIC1 is never enabled. Add Sequoia board code to turn on IIC1 if CONFIG_I2C_MULTI_BUS is selected. Signed-off-by: Mike Nuss <mike@terascala.com> Cc: Stefan Roese <sr@denx.de>
* Coding Style Cleanup; update CHANGELOGWolfgang Denk2008-01-23-2/+2
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* ppc4xx: Sequoia coding style cleanup and beautificationMatthias Fuchs2008-01-16-136/+110
| | | | Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
* ppc4xx: assign PCI interrupts on seuqoia boardsMatthias Fuchs2008-01-09-0/+14
| | | | | | Some operating systems rely on assigned PCI interrupts. Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
* ppc4xx: Use CFG_4xx_GPIO_TABLE to configure Sequoia boardLawrence R. Johnson2008-01-04-30/+1
| | | | | | | | | | | | | | Note: this patch changes the configuration of some GPIO registers: Register Old Value New Value --------------- ---------- ---------- DCR GPIO0_TCR 0x0000000F 0x0000F0CF DCR GPIO0_TSRH 0x55005000 0x00000000 DCR GPIO1_TCR 0xC2000000 0xE2000000 DCR GPIO1_TSRL 0x0C000000 0x00200000 DCR GPIO1_ISR2L 0x00050000 0x00110000 Signed-off-by: Larry Johnson <lrj@acm.org>
* Use out_be32() and friends to access memory-mapped registers in sequoia.cLarry Johnson2007-12-27-29/+29
| | | | Signed-off-by: Larry Johnson <lrj@acm.org>
* ppc4xx: Bring 4xx fdt support up-to-dateStefan Roese2007-12-27-1/+24
| | | | | | | | This patch update the 4xx fdt support. It enabled fdt booting on the AMCC Kilauea and Sequoia for now. More can follow later quite easily. Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Fix incorrect 33/66MHz PCI clock log-message on Sequoia & YosemiteStefan Roese2007-10-15-3/+4
| | | | | | | | | | | The BCSR status bit for the 66MHz PCI operation was correctly addressed (MSB/LSB problem). Now the correct currently setup PCI frequency is displayed upon bootup. This patch also fixes this problem on Rainier & Yellowstone, since these boards use the same souce code as Sequoia & Yosemite do. Signed-off-by: Stefan Roese <sr@denx.de>
* resubmit: ppc4xx: Remove sequoia/sequioa.h. Cleanup ppc440.h for PPC440EPXNiklaus Giger2007-07-04-5/+4
| | | | Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
* Merge with git://www.denx.de/git/u-boot.gitStefan Roese2007-06-25-0/+10
|\
| * Extend POST support for PPC440Igor Lisitsin2007-06-22-0/+10
| | | | | | | | | | | | | | Added memory, CPU, UART, I2C and SPR POST tests for PPC440. Signed-off-by: Igor Lisitsin <igor@emcraft.com> --
* | ppc4xx: Add pci_pre_init() for 405 boardsStefan Roese2007-06-25-15/+2
|/ | | | | | | | This patch removes the CFG_PCI_PRE_INIT option completely, since it's not needed anymore with the patch from Matthias Fuchs with the "weak" pci_pre_init() implementation. Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Undo Sequoia patch for dynamic EBC speed support of 83MHzStefan Roese2007-06-01-6/+0
| | | | | | | | This patch undoes the patch by Jeff Mann with commit-id ada4697d. As suggested by AMCC it is not recommended to dynamically change the EBC speed after bootup. So we undo this change to be on the safe side. Signed-off-by: Stefan Roese <sr@denx.de>
* [PATCH] Run new sequoia boards with an EBC speed of 83MHzJeffrey Mann2007-05-16-2/+8
| | | | | | | | | | | | | | | Because the Sequoia board does not boot with an EBC faster than 66MHz, the clock divider are changed after the initial boot process. This allows for maximum clocking speeds to be achieved on newer boards. Sequoia boards with 666.66 MHz processors require that the EBC divider be set to 3 in order to start the initial boot process at a slower EBC speed. After the initial boot process, the divider can be set back to 2, which will cause the boards to run at 83.333MHz. This is backward compatible with boards with 533.33 MHz processors, as these boards will already be set with an EBC divider of 2. Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
* Merge with /home/stefan/git/u-boot/acadiaStefan Roese2007-03-24-2/+2
|\
| * [PATCH] Small Sequoia cleanupStefan Roese2007-03-24-2/+2
| | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de>
* | ppc4xx: Fix file mode of sequoia.cStefan Roese2007-03-08-0/+0
| | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de>
* | ppc4xx: Clear Sequoia/Rainier security engine reset bitsJohn Otken john@softadvances.com2007-03-08-0/+4
|/ | | | Signed-off-by: John Otken john@softadvances.com <john@softadvances.com>
* [PATCH] Update Sequoia (440EPx) to display board rev and PCI bus speedStefan Roese2007-01-13-0/+7
| | | | | | | Now the board revision and the current PCI bus speed are printed after the board message. Signed-off-by: Stefan Roese <sr@denx.de>
* [PATCH] Clear PLB4A0_ACR[WRP] on Sequoia (440EPx)Stefan Roese2007-01-05-3/+12
| | | | | | | This fix will make the MAL burst disabling patch for the Linux EMAC driver obsolete. Signed-off-by: Stefan Roese <sr@denx.de>
* [PATCH] Fix sequoia flash autodetection (finally correct)Stefan Roese2006-12-22-3/+11
| | | | | | | Now 32MByte and 64MByte FLASH is know to work and other configurations should work too. Signed-off-by: Stefan Roese <sr@denx.de>
* Coding style cleanupWolfgang Denk2006-10-09-36/+36
|
* Add support for AMCC Rainier PPX440GRx eval boardStefan Roese2006-09-13-0/+8
| | | | Patch by Stefan Roese, 13 Sep 2006
* Add support for AMCC Sequoia PPC440EPx eval boardStefan Roese2006-09-07-0/+552
- Add support for PPC440EPx & PPC440GRx - Add support for PPC440EP(x)/GR(x) NAND controller in cpu/ppc4xx directory - Add NAND boot functionality for Sequoia board, please see doc/README.nand-boot-ppc440 for details - This Sequoia NAND image doesn't support environment in NAND for now. This will be added in a short while. Patch by Stefan Roese, 07 Sep 2006
generated by cgit v1.1 at 2024-11-29 06:58:35 +0000