summaryrefslogtreecommitdiff
path: root/board/amcc/bamboo
Commit message (Collapse)AuthorAgeLines
* Fix linker scripts: add NOLOAD atribute to .bss/.sbss sectionsWolfgang Denk2008-01-12-2/+2
| | | | | | | | | | | | | | | | | | | With recent toolchain versions, some boards would not build because or errors like this one (here for ocotea board when building with ELDK 4.2 beta): ppc_4xx-ld: section .bootpg [fffff000 -> fffff23b] overlaps section .bss [fffee900 -> fffff8ab] For many boards, the .bss section is big enough that it wraps around at the end of the address space (0xFFFFFFFF), so the problem will not be visible unless you use a 64 bit tool chain for development. On some boards however, changes to the code size (due to different optimizations) we bail out with section overlaps like above. The fix is to add the NOLOAD attribute to the .bss and .sbss sections, telling the linker that .bss does not consume any space in the image. Signed-off-by: Wolfgang Denk <wd@denx.de>
* ppc4xx: Fixed offset of refresh rate type for Bamboo on-board DDR SDRAMEugene O'Brien2007-10-31-2/+2
| | | | | | | | | | | | | This patch also adds a note to the fixed DDR setup for Bamboo NAND booting: Note: As found out by Eugene O'Brien <eugene.obrien@advantechamt.com>, the fixed DDR setup has problems (U-Boot crashes randomly upon TFTP), when the DIMM modules are still plugged in. So it is recommended to remove the DIMM modules while using the NAND booting code with the fixed SDRAM setup! Signed-off-by: Eugene O'Brien <eugene.obrien@advantechamt.com> Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Update AMCC Bamboo 440EP supportEugene OBrien2007-07-31-99/+227
| | | | | | | | | | | | | | | Changed storage type of cfg_simulate_spd_eeprom to const Changed storage type of gpio_tab to stack storage (Cannot access global data declarations in .bss until afer code relocation) Improved SDRAM tests to catch problems where data is not uniquely addressable (e.g. incorrectly programmed SDRAM row or columns) Added CONFIG_PROG_SDRAM_TLB to support Bamboo SIMM/DIMM modules Fixed AM29LV320DT (OpCode Flash) sector map Signed-off-by: Eugene OBrien <eugene.obrien@advantechamt.com> Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Add pci_pre_init() for 405 boardsStefan Roese2007-06-25-2/+2
| | | | | | | | This patch removes the CFG_PCI_PRE_INIT option completely, since it's not needed anymore with the patch from Matthias Fuchs with the "weak" pci_pre_init() implementation. Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Add missing file for Bamboo NAND booting supportStefan Roese2007-06-01-0/+137
| | | | Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Prepare Bamboo port for NAND booting supportStefan Roese2007-06-01-109/+119
| | | | | | | | | | This patch updates the "normal" Bamboo NOR booting port, so that it is compatible with the coming soon NAND booting Bamboo port. It also enables the 2nd NAND flash on the Bamboo. Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Bamboo: Use current NAND driver and *not* the legacy driverStefan Roese2007-04-29-94/+1
| | | | Signed-off-by: Stefan Roese <sr@denx.de>
* [PATCH] Add 4xx GPIO functionsStefan Roese2007-03-24-10/+1
| | | | | | | This patch adds some 4xx GPIO functions. It also moves some of the common code and defines into a common 4xx GPIO header file. Signed-off-by: Stefan Roese <sr@denx.de>
* Move "ar" flags to config.mk to allow for silent "make -s"Wolfgang Denk2006-10-09-1/+1
| | | | Based on patch by Mike Frysinger, 20 Jun 2006
* Add support for a saving build objects in a separate directory.Marian Balakowicz2006-09-01-7/+10
| | | | | | | | | | | | | | | | | | | | | Modifications are based on the linux kernel approach and support two use cases: 1) Add O= to the make command line 'make O=/tmp/build all' 2) Set environement variable BUILD_DIR to point to the desired location 'export BUILD_DIR=/tmp/build' 'make' The second approach can also be used with a MAKEALL script 'export BUILD_DIR=/tmp/build' './MAKEALL' Command line 'O=' setting overrides BUILD_DIR environent variable. When none of the above methods is used the local build is performed and the object files are placed in the source directory.
* AMCC bamboo (440EP) U-Boot image reduced to 384kbyteStefan Roese2006-07-27-2/+2
| | | | | Please see doc/README.bamboo for details. Patch by Stefan Roese, 27 Jul 2006
* Fix AMCC bamboo eval board compilation errors.Marian Balakowicz2006-07-04-14/+1
|
* Fix JFFS2 support for legacy NAND driver.Marian Balakowicz2006-04-08-3/+0
| | | | Some more NAND cleanup and small fixes.
* Minor code cleanupWolfgang Denk2006-03-06-1/+0
|
* Re-factoring the legacy NAND code (legacy NAND now only in board-specificBartlomiej Sieka2006-03-05-1/+5
| | | | | | | code and in SoC code). Boards using the old way have CFG_NAND_LEGACY and BOARDLIBS = drivers/nand_legacy/libnand_legacy.a added. Build breakage for NETTA.ERR and NETTA_ISDN - will go away when the new NAND support is implemented for these boards.
* (no commit message)Wolfgang Denk2005-12-12-0/+1
|
* Minor AMCC 4xx board cleanupsStefan Roese2005-11-29-12/+0
| | | | Patch by Stefan Roese, 27 Nov 2005
* Changed PPC44x startup message (cpu info, speed...) to common style:Stefan Roese2005-11-27-10/+1
| | | | | | | | | | | On PPC44x platforms, the startup message generated in "cpu.c" only comprised the ppc type and revision but not additional informations like speed etc. Those speed infos where printed in the board specific code. This new implementation now prints all CPU infos in the common cpu specific code. No board specific code is needed anymore and therefore removed from all current 44x implementations. Patch by Stefan Roese, 27 Nov 2005
* Fix Bamboo DDR SDRAM initialization (problem with onboard SDRAM)Stefan Roese2005-11-15-19/+38
| | | | Patch by Stefan Roese, 15 Nov 2005
* Fix problems with ld version 2.16 (dot outside sections problem)Wolfgang Denk2005-08-31-0/+2
| | | | | Pointed out by Gerhard Jaeger, 31 Aug 2005; cf. http://sourceware.org/ml/binutils/2005-08/msg00412.html
* Merged 405gp_enet.c and 440gx_enet.c to generic 4xx_enet.cStefan Roese2005-08-16-1/+0
| | | | | now handling all 4xx cpu's. Patch by Stefan Roese, 16 Aug 2005
* Add NAND FLASH support for AMCC Bamboo 440EP eval boardStefan Roese2005-08-11-31/+126
| | | | Patch by Stefan Roese, 11 Aug 2005
* Add support for ep8248 boardWolfgang Denk2005-08-06-569/+581
| | | | | | Patch by Yuli Barcohen, 12 Dec 2004 Minor code cleanup.
* Add support for AMCC Bamboo PPC440EP eval boardStefan Roese2005-08-04-134/+2250
| | | | Patch by Stefan Roese, 04 Aug 2005
* Major cleanup for AMCC PPC4xx eval boards.Stefan Roese2005-08-01-0/+793
Patch by Stefan Roese, 01 Aug 2005
generated by cgit v1.1 at 2024-11-12 20:18:43 +0000