summaryrefslogtreecommitdiff
path: root/board/Marvell
Commit message (Collapse)AuthorAgeLines
* ppc: Move cpu/$CPU to arch/ppc/cpu/$CPUPeter Tyser2010-04-13-2/+2
| | | | Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
* sheevaplug: correct SDRAM address control registerMark Asselstine2009-11-27-5/+5
| | | | | | | | | | | | | | | | | | | | | | | value The SheevaPlug DevKit is shipped with 4x8 by 1Gb DDR devices in two banks for a total of 512MB of RAM. Based on this configuration the existing values for SDRAM address control register are incorrect and result in random kernel oops as memory is incorrectly accessed (while for example extracting a large tarball such as a rootfs). Based on the hardware configuration along with the supporting documentation from Marvell these are the correct values, as well this change mimics values previously used in Marvell's own u-boot git tree for the SheevaPlug. Other variants of the hardware such as the PogoPlug and TonidoPlug may have different memory configurations but to properly support those additional board directories should be maintained or a better system to support other kwb*.cfg is needed. Tested on SheevaPlug DevKit. Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
* Support for the OpenRD base boardSimon Kagstrom2009-10-13-0/+463
| | | | | | | The implementation is borrowed from the sheevaplug board and the Marvell 1.1.4 code. Unsupported (or untested) is the SD card, PCIe and SATA. Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
* Kirkwood: mv88f6281gtw_ge: Add kwbimage build supportPrafulla Wadaskar2009-10-13-0/+168
| | | | | | | | | | | This patch adds kwbimage configuration file (used by mkimage utility) to support u-boot.kwb target on mv88f6281gtw_ge board. To create Kirkwood boot image to be flashed on SPI Flash, additional parameter u-boot.kwb need to be passed during make. Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
* Kirkwood: rd6281a: Add kwbimage build supportPrafulla Wadaskar2009-10-13-0/+170
| | | | | | | | | | | This patch adds kwbimage configuration file (used by mkimage utility) to support u-boot.kwb target on rd6281a platform. To create Kirkwood boot image to be flashed on NAND, additional parameter u-boot.kwb need to be passed during make. Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
* ppc: Enable full relocation to RAMPeter Tyser2009-10-03-2/+0
| | | | | | | | | | | | | The following changes allow U-Boot to fully relocate from flash to RAM: - Remove linker scripts' .fixup sections from the .text section - Add -mrelocatable to PLATFORM_RELFLAGS for all boards - Define CONFIG_RELOC_FIXUP_WORKS for all boards Previously, U-Boot would partially relocate, but statically initialized pointers needed to be manually relocated. Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
* Kirkwood: Sheevaplug: Add kwimage configuration filePrafulla Wadaskar2009-09-10-0/+165
| | | | Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
* Marvell RD6281A Board supportPrafulla Wadaskar2009-07-23-0/+296
| | | | | | | | | | | | This is Marvell's 88F6281_A0 based reference design board This patch is tested for- 1. Boot from DRAM/NAND flash/NFS 2. File transfer using tftp and loadb 3. NAND flash read/write/erase Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* Marvell MV88F6281GTW_GE Board supportPrafulla Wadaskar2009-07-18-0/+253
| | | | | | | | | | | | | | | This is Marvell's 88F6281_A0 based custom board developed for wireless access point product This patch is tested for- 1. Boot from DRAM/SPI flash/NFS 2. File transfer using tftp and loadb 3. SPI flash read/write/erase 4. Booting Linux kernel and RFS from SPI flash 5. Boot from USB supported Reviewed-by: Ronen Shitrit <rshitrit@marvell.com> Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
* Marvell Sheevaplug Board supportPrafulla Wadaskar2009-07-18-0/+272
| | | | | | | | | | | | | | | | | | | Reference: http://plugcomputer.org/ http://openplug.org/plugwiki/index.php/Das_U-boot_plug_support This patch is tested for- 1. Boot from DRAM/NAND flash 2. File transfer using tftp 3. NAND flash read/write/erase 4. Linux kernel and RFS Boot from NAND 5. Enabled USB PHY init for kernel need 6. Boot from USB supported Note: to boot Kirkwood kernel with USB support, you should add "usb start" in the boot sequence Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
* asm-generic: Consolidate errno.h to asm-generic/errno.hMichal Simek2009-07-09-167/+2
| | | | | | | | | | | | | | | This patch use blackfin errno.h implementation which correspond Linux kernel one. MIPS implemetation is different that's why I keep it. I removed ppc_error_no.h from Marvell boards which was the same too. I have got ack from ppc40x, blackfin, arm, coldfire and avr custodians. Acked-by: Stefan Roese <sr@denx.de> Signed-off-by: Michal Simek <monstr@monstr.eu>
* Marvell: i2c cleanupPeter Tyser2009-06-12-7/+12
| | | | | | | | | | | The following changes were made, primarily to bring the Marvell i2c driver in line with U-Boot's current I2C API: - Made i2c_init() globally accessible - Made i2c_read() and i2c_write() return an integer - Updated i2c_init() calls to pass in CONFIG_SYS_I2C_SLAVE in the offhand chance someone adds slave support in the future Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
* Fix all linker script to handle all rodata sectionsTrent Piepho2009-03-20-6/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A recent gcc added a new unaligned rodata section called '.rodata.str1.1', which needs to be added the the linker script. Instead of just adding this one section, we use a wildcard ".rodata*" to get all rodata linker section gcc has now and might add in the future. However, '*(.rodata*)' by itself will result in sub-optimal section ordering. The sections will be sorted by object file, which causes extra padding between the unaligned rodata.str.1.1 of one object file and the aligned rodata of the next object file. This is easy to fix by using the SORT_BY_ALIGNMENT command. This patch has not be tested one most of the boards modified. Some boards have a linker script that looks something like this: *(.text) . = ALIGN(16); *(.rodata) *(.rodata.str1.4) *(.eh_frame) I change this to: *(.text) . = ALIGN(16); *(.eh_frame) *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) This means the start of rodata will no longer be 16 bytes aligned. However, the boundary between text and rodata/eh_frame is still aligned to 16 bytes, which is what I think the real purpose of the ALIGN call is. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
* Align end of bss by 4 bytesSelvamuthukumar2008-11-18-0/+2
| | | | | | | | | | Most of the bss initialization loop increments 4 bytes at a time. And the loop end is checked for an 'equal' condition. Make the bss end address aligned by 4, so that the loop will end as expected. Signed-off-by: Selvamuthukumar <selva.muthukumar@e-coninfotech.com> Signed-off-by: Wolfgang Denk <wd@denx.de>
* Cleanup: fix "MHz" spellingWolfgang Denk2008-10-21-6/+6
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* rename CFG_ macros to CONFIG_SYSJean-Christophe PLAGNIOL-VILLARD2008-10-18-236/+236
| | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* rename environment.c in env_embedded.c to reflect is functionalityJean-Christophe PLAGNIOL-VILLARD2008-09-10-2/+2
| | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* rename CFG_ENV_IS_IN_EEPROM in CONFIG_ENV_IS_IN_EEPROMJean-Christophe PLAGNIOL-VILLARD2008-09-10-1/+1
| | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* Moved initialization of EEPRO100 Ethernet controller to board_eth_init()Ben Warren2008-09-02-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Affected boards: db64360 db64460 katmai taihu taishan yucca cpc45 cpu87 eXalion elppc debris kvme080 mpc8315erdb integratorap ixdp425 oxc pm826 pm828 pm854 pm856 ppmc7xx sc3 sc520_spunk sorcery tqm8272 tqm85xx utx8245 Removed initialization of the driver from net/eth.c Also, wrapped contents of pci_eth_init() by CONFIG_PCI. Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* Clean up usage of icache_disable/dcache_disableKumar Gala2008-08-19-10/+0
| | | | | | | | | | | | There is no point in disabling the icache on 7xx/74xx/86xx parts and not also flushing the icache. All callers of invalidate_l1_instruction_cache() call icache_disable() right after. Make it so icache_disable() calls invalidate_l1_instruction_cache() for us. Also, dcache_disable() already calls dcache_flush() so there is no point in the explicit calls of dcache_flush(). Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Change initdram() return type to phys_size_tBecky Bruce2008-06-12-2/+2
| | | | | | | | | | | | | | | | | | | This patch changes the return type of initdram() from long int to phys_size_t. This is required for a couple of reasons: long int limits the amount of dram to 2GB, and u-boot in general is moving over to phys_size_t to represent the size of physical memory. phys_size_t is defined as an unsigned long on almost all current platforms. This patch *only* changes the return type of the initdram function (in include/common.h, as well as in each board's implementation of initdram). It does not actually modify the code inside the function on any of the platforms; platforms which wish to support more than 2GB of DRAM will need to modify their initdram() function code. Build tested with MAKEALL for ppc, arm, mips, mips-el. Booted on powerpc MPC8641HPCN. Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
* Big white-space cleanup.Wolfgang Denk2008-05-21-81/+81
| | | | | | | | | | | This commit gets rid of a huge amount of silly white-space issues. Especially, all sequences of SPACEs followed by TAB characters get removed (unless they appear in print statements). Also remove all embedded "vim:" and "vi:" statements which hide indentation problems. Signed-off-by: Wolfgang Denk <wd@denx.de>
* Remove all the search paths from the .lds files.Jason Wessel2008-04-17-2/+0
| | | | | | | The cross compiler is responsible for providing the correct libraries and the logic to find the linking libraries. Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
* Fix linker scripts: add NOLOAD atribute to .bss/.sbss sectionsWolfgang Denk2008-01-12-2/+2
| | | | | | | | | | | | | | | | | | | With recent toolchain versions, some boards would not build because or errors like this one (here for ocotea board when building with ELDK 4.2 beta): ppc_4xx-ld: section .bootpg [fffff000 -> fffff23b] overlaps section .bss [fffee900 -> fffff8ab] For many boards, the .bss section is big enough that it wraps around at the end of the address space (0xFFFFFFFF), so the problem will not be visible unless you use a 64 bit tool chain for development. On some boards however, changes to the code size (due to different optimizations) we bail out with section overlaps like above. The fix is to add the NOLOAD attribute to the .bss and .sbss sections, telling the linker that .bss does not consume any space in the image. Signed-off-by: Wolfgang Denk <wd@denx.de>
* board/[A-Za-i]*: Remove lingering references to CFG_CMD_* symbols.Jon Loeliger2007-07-10-1/+1
| | | | | | | | Fixed some broken instances of "#ifdef CMD_CFG_IDE" too. Those always evaluated TRUE, and thus were always compiled even when IDE really wasn't defined/wanted. Signed-off-by: Jon Loeliger <jdl@freescale.com>
* board/[A-Za-c]*: Remove obsolete references to CONFIG_COMMANDSJon Loeliger2007-07-09-1/+1
| | | | Signed-off-by: Jon Loeliger <jdl@freescale.com>
* board/[Ma-i]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).Jon Loeliger2007-07-04-1/+1
| | | | | | | | | | | | | | This is a compatibility step that allows both the older form and the new form to co-exist for a while until the older can be removed entirely. All transformations are of the form: Before: #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) After: #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) Signed-off-by: Jon Loeliger <jdl@freescale.com>
* Move "ar" flags to config.mk to allow for silent "make -s"Wolfgang Denk2006-10-09-2/+2
| | | | Based on patch by Mike Frysinger, 20 Jun 2006
* Coding style cleanupWolfgang Denk2006-10-09-2/+2
|
* Add support for a saving build objects in a separate directory.Marian Balakowicz2006-09-01-12/+32
| | | | | | | | | | | | | | | | | | | | | Modifications are based on the linux kernel approach and support two use cases: 1) Add O= to the make command line 'make O=/tmp/build all' 2) Set environement variable BUILD_DIR to point to the desired location 'export BUILD_DIR=/tmp/build' 'make' The second approach can also be used with a MAKEALL script 'export BUILD_DIR=/tmp/build' './MAKEALL' Command line 'O=' setting overrides BUILD_DIR environent variable. When none of the above methods is used the local build is performed and the object files are placed in the source directory.
* More code cleanupWolfgang Denk2006-07-21-0/+3
|
* GCC-4.x fixes: clean up global data pointer initialization for all boards.Wolfgang Denk2006-03-31-22/+14
|
* (no commit message)Wolfgang Denk2005-12-12-0/+2
|
* Code cleanup, especially MIPS for GCC 4.xWolfgang Denk2005-12-04-3/+3
|
* Cleanup for GCC-4.xWolfgang Denk2005-10-13-18/+19
|
* Fix problems with ld version 2.16 (dot outside sections problem)Wolfgang Denk2005-08-31-0/+4
| | | | | Pointed out by Gerhard Jaeger, 31 Aug 2005; cf. http://sourceware.org/ml/binutils/2005-08/msg00412.html
* Fix problems with SNTP support;wdenk2005-04-02-2/+0
| | | | enable SNTP support in some boards.
* * Patch by Detlev Zundel, 08 Sep 2004:wdenk2004-09-08-24/+24
| | | | | | | | | | | Update etags build target * Improve NetConsole support: add support for broadcast destination address and buffered input. * Cleanup compiler warnings for GCC 3.3.x and later * Fix problem in cmd_jffs2.c introduced by CFG_JFFS_SINGLE_PART patch
* * The PS/2 mux on the BMS2003 board needs 450 ms after power onwdenk2004-01-20-7/+7
| | | | | | | | | | | | before we can access it; add delay in case we are faster (with no CF card inserted) * Cleanup of some init functions * Make sure SCC Ethernet is always stopped by the time we boot Linux to avoid Linux crashes by early packets coming in. * Accelerate flash accesses on LWMON board by using buffered writes
* * Patch by Ronen Shitrit, 10 Dec 2003:wdenk2004-01-03-0/+28503
Add support for the Marvell DB64360 / DB64460 development boards * Patch by Detlev Zundel, 10 Dec 2003: fix dependency problem in examples/Makefile
generated by cgit v1.1 at 2024-12-22 14:24:12 +0000