summaryrefslogtreecommitdiff
path: root/arch
Commit message (Collapse)AuthorAgeLines
* arm: socfpga: Switch to filtered QTS filesMarek Vasut2015-08-23-30/+8
| | | | Signed-off-by: Marek Vasut <marex@denx.de>
* arm: socfpga: Add qts-filter.sh scriptMarek Vasut2015-08-23-0/+205
| | | | | | | | | Add script which loads the QTS-generated sources and headers and converts them into sensible format which can be used with much more easy in mainline U-Boot. The script also filters out macros which makes no sense anymore, so they don't pollute namespace and waste space. Signed-off-by: Marek Vasut <marex@denx.de>
* arm: socfpga: Split Altera socfpga into AV and CV SoCDKMarek Vasut2015-08-23-2/+2
| | | | | | | | | | | | | | | | | | The board/altera/socfpga directory is not a generic SoCFPGA machine anymore, but instead it represents the Altera SoCDK board. To make matters more complicated, it represents both CycloneV and ArriaV variant. On the other hand, nowadays, the content of this board directory is mostly comprised of QTS-generated header files, while all the generic code is in arch/arm/mach-socfpga already. Thus, this patch splits the board/altera/socfpga into a separate board directory for ArriaV SoCDK and CycloneV SoCDK, so that each can be populated with the correct QTS-generated header files for that particular board. Signed-off-by: Marek Vasut <marex@denx.de>
* arm: socfpga: Unbind CPU type from board typeMarek Vasut2015-08-23-8/+18
| | | | | | | | | | | | | | | | | | | The CONFIG_TARGET_SOCFPGA_CYCLONE5 and CONFIG_TARGET_SOCFPGA_ARRIA5 selected both a board and a CPU. This is not correct as these macros are supposed to select only board. All would be good, if QTS-generated header files didn't check for these macros exactly to determine if the platform is Cyclone V or Arria V. Thus, for the sake of compatibility with not well fleshed out header file generator, this patch makes these two macros into a stub config option and introduces new CONFIG_TARGET_SOCFPGA_CYCLONE5_SOCDK and CONFIG_TARGET_SOCFPGA_ARRIA5_SOCDK targets, which select the previous stub config option. The result is that compatibility with QTS is preserved and the new CONFIG_TARGET_* select actual target boards. Signed-off-by: Marek Vasut <marex@denx.de>
* arm: socfpga: Move wrappers into platform directoryMarek Vasut2015-08-23-0/+545
| | | | | | | | | Move the wrappers for QTS-generated files into platform directory out of the board directory. The trick here is to add -I to CFLAGS such that it points to the board directory in source tree and thus the qts/ directory there is still reachable. Signed-off-by: Marek Vasut <marex@denx.de>
* arm: socfpga: Do not enable gmac1 in Cyclone V dtsiMarek Vasut2015-08-23-6/+1
| | | | | | | | | | | The GMAC which is enabled is purely board property, so do not enable arbitrary GMAC in DT include files. Same goes for PHY mode, which is again a board property. The CycloneV SoCDK does this correctly, but SoCrates doesn't. This bug never manifested itself though, since all the boards ever used the GMAC1 . This bug manifests itself only on boards that utilise GMAC0. Signed-off-by: Marek Vasut <marex@denx.de>
* arm: socfpga: Make the DT mmc node consistentMarek Vasut2015-08-23-3/+2
| | | | | | | | The socfpga_cyclone5.dtsi has an mmc0 node, socrates has mmc node. This makes aliases not very usable, so make everything into mmc0. Moreover, zap the useless mmc alias while at this. Signed-off-by: Marek Vasut <marex@denx.de>
* arm: socfpga: Fix delay in clock managerMarek Vasut2015-08-23-7/+5
| | | | | | | | This code claims it needs to wait 7us, yet it uses get_timer() function which operates with millisecond granularity. Use timer_get_us() instead, which operates with microsecond granularity. Signed-off-by: Marek Vasut <marex@denx.de>
* arm: socfpga: Fix delay in freeze controllerMarek Vasut2015-08-23-7/+5
| | | | | | | | | | | | Based on observation, this udelay(20) was apparently too high and caused subsequent failure to calibrate DDR when U-Boot was compiled with certain toolchains. Lowering this delay fixed the problem. Instead of permanently lowering the delay, calculate the correct delay based on the original comment, that is, obtain EOSC1 frequency and use it to calculate the precise delay. Signed-off-by: Marek Vasut <marex@denx.de>
* ARM: davinci: remove support for cam_enc_4xxMasahiro Yamada2015-08-20-5/+0
| | | | | | | | | This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Heiko Schocher <hs@denx.de> Acked-by: Marek Vasut <marex@denx.de>
* Merge git://git.denx.de/u-boot-usbTom Rini2015-08-19-0/+6
|\
| * usb: spear: Add support for both SPEAr600 EHCI controllersStefan Roese2015-08-19-0/+6
| | | | | | | | | | | | | | | | | | | | | | USB EHCI on SPEAr600 has not been tested for a while. The base controller addresses are missing. This patch adds the defines to the header. And adds the missing code. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Vipin Kumar <vk.vipin@gmail.com> Cc: Marek Vasut <marex@denx.de>
* | ARM: dts: Rename memory@0 to memoryMichal Simek2015-08-19-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | zynq-7000.dtsi include skeleton.dtsi which contains memory node with base address and size zero. If you add memory@0 node to the platform DTS in final DTB there are two memory nodes and U-Boot works with the first one (with zeros) which end up in failing in dram_init because size is zero. Platform memory node should rewrite default memory node setup from skeleton.dtsi that's why platfroms needs to also use memory as node name instead of memory@0. Reported-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | zynqmp: usb: Add usb dwc3 driver support for zynqmpSiva Durga Prasad Paladugu2015-08-19-0/+6
| | | | | | | | | | | | | | | | | | | | Added usb dwc3 driver support for zynqmp this also supports the DFU and LTHOR to download the linux images on to RAM and cen be booted from those linux images. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | ARM: zynq: drop "optional" from board select in favor of ZC702Masahiro Yamada2015-08-19-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | One disadvantage of commit a26cd04920dc (arch: Make board selection choices optional) is that Kconfig could create such an insane .config file that no board is selected. Rip off the "optional" again in favor of ZC702 as the default target. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | ARM: zynqmp: Add platform specific arch_get_page_tableMichal Simek2015-08-19-0/+5
| | | | | | | | | | | | | | | | | | Based on the patch: "armv8: caches: Added routine to set non cacheable region" (sha1: dad17fd51027ad02ac8f02deed186d08109d61fd) it is necessary to add platform specific hook. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | zynqmp: Enable U-Boot run in EL3Michal Simek2015-08-19-0/+8
|/ | | | | | | Enable Secure IOU setup to enable U-Boot to run in EL3 without setting from ATF. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* of: clean up OF_CONTROL ifdef conditionalsMasahiro Yamada2015-08-18-17/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | We have flipped CONFIG_SPL_DISABLE_OF_CONTROL. We have cleansing devices, $(SPL_) and CONFIG_IS_ENABLED(), so we are ready to clear away the ugly logic in include/fdtdec.h: #ifdef CONFIG_OF_CONTROL # if defined(CONFIG_SPL_BUILD) && !defined(SPL_OF_CONTROL) # define OF_CONTROL 0 # else # define OF_CONTROL 1 # endif #else # define OF_CONTROL 0 #endif Now CONFIG_IS_ENABLED(OF_CONTROL) is the substitute. It refers to CONFIG_OF_CONTROL for U-boot proper and CONFIG_SPL_OF_CONTROL for SPL. Also, we no longer have to cancel CONFIG_OF_CONTROL in include/config_uncmd_spl.h and scripts/Makefile.spl. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
* of: flip CONFIG_SPL_DISABLE_OF_CONTROL into CONFIG_SPL_OF_CONTROLMasahiro Yamada2015-08-18-14/+0
| | | | | | | | | | | | | | | | | | | As we discussed a couple of times, negative CONFIG options make our life difficult; CONFIG_SYS_NO_FLASH, CONFIG_SYS_DCACHE_OFF, ... and here is another one. Now, there are three boards enabling OF_CONTROL on SPL: - socfpga_arria5_defconfig - socfpga_cyclone5_defconfig - socfpga_socrates_defconfig This commit adds CONFIG_SPL_OF_CONTROL for them and deletes CONFIG_SPL_DISABLE_OF_CONTROL from the other boards to invert the logic. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* lpc32xx: add common USB OHCI defines for all LPC32xx boardsVladimir Zapolskiy2015-08-18-0/+9
| | | | | | | | The change adds a number of macro definitions used by USB OHCI driver, if CONFIG_USB_OHCI_LPC32XX is selected from a board config file. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Tested-by: Sylvain Lemieux <slemieux@tycoint.com>
* usb: lpc32xx: add host USB driverSylvain Lemieux2015-08-18-0/+19
| | | | | | | | | | | | | Incorporate USB driver from legacy LPCLinux NXP BSP. The files taken from the legacy patch are: - lpc32xx USB driver - lpc3250 header file USB registers definition. The legacy driver was updated and clean-up as part of the integration with the latest u-boot. Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com> Acked-by: Marek Vasut <marex@denx.de> Tested-by: Vladimir Zapolskiy <vz@mleia.com>
* lpc32xx: move common SLC NAND defines to arch/config.hVladimir Zapolskiy2015-08-18-0/+29
| | | | | | | | | | | | | | | A number of LPC32xx SLC NAND defines is dictated by controller hardware limits and OOB layout is defined by operating system, the definitions are common for all users. Since those macro are used in out of NAND SLC driver code (simple NAND SPL framework), they can not be placed into the driver, therefore move them from board config files to arch/config.h The change also adds OOB layout details specific to small page NAND devices taken from Linux kernel. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Tested-by: Sylvain Lemieux <slemieux@tycoint.com>
* dma: lpc32xx: add DMA driverSylvain Lemieux2015-08-18-0/+78
| | | | | | | | | | | | | Incorporate DMA driver from legacy LPCLinux NXP BSP. The files taken from the legacy patch are: - lpc32xx DMA driver - lpc3250 header file DMA registers definition. The legacy driver was updated and clean-up as part of the integration with the latest u-boot. Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com> Acked-by: Marek Vasut <marex@denx.de> Tested-by: Vladimir Zapolskiy <vz@mleia.com>
* Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini2015-08-18-0/+205
|\
| * ARM: dra7xx_evm: Enable EDMA3 in SPL to support DMA on qspiVignesh R2015-08-17-0/+5
| | | | | | | | | | | | | | | | | | | | | | Enable TI_EDMA3 and SPL_DMA support, so as to reduce boot time. With DMA enabled there is almost 3x improvement in read performance. This helps in reducing boot time in qspiboot mode Also add EDMA3 base address for DRA7XX and AM57XX. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
| * dma: ti-edma3: Add helper function to support edma3 transferVignesh R2015-08-17-0/+2
| | | | | | | | | | Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
| * ARM: AM43XX: Add functions to enable and disable EDMA3 clocksVignesh R2015-08-17-0/+36
| | | | | | | | | | | | | | | | | | Adds functions to enable and disable edma3 clocks which can be invoked by drivers using edma3 to control the clocks. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
| * ARM: OMAP5: Add functions to enable and disable EDMA3 clocksVignesh R2015-08-17-0/+52
| | | | | | | | | | | | | | | | | | Adds functions to enable and disable edma3 clocks which can be invoked by drivers using edma3 to control the clocks. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
| * ARM: OMAP5: Add support for disabling clocks in ubootKishon Vijay Abraham I2015-08-17-0/+57
| | | | | | | | | | | | | | | | | | Add do_disable_clocks() to disable clock domains and module clocks. These clocks are enabled using do_enable_clocks(). Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
| * ARM: AM43xx: Add support for disabling clocks in ubootKishon Vijay Abraham I2015-08-17-0/+53
| | | | | | | | | | | | | | | | | | Add do_disable_clocks() to disable clock domains and module clocks. These clocks are enabled using do_enable_clocks(). Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-samsungTom Rini2015-08-18-7/+5
|\ \
| * | ARM: exynos: fix regression for Origen4210Thomas Abraham2015-08-17-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The do_lowlevel_init() function includes certian CA15 specific L2 cache configuration which is only applicable on Exynos5420 and members of its family. Fix the regression on Origen4210 by skipping the Exynos5420 specific portions of the code. Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Tested-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | ARM: exynos: move SoC sources to mach-exynosThomas Abraham2015-08-17-3/+3
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | Move arch/arm/cpu/armv7/exynos/* to arch/arm/mach-exynos/* to allow reuse of existing code for ARMv8 based Exynos platforms. Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Masahiro Yamada <yamada.m@jp.panasonic.com> Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | pci: mvebu: Add PCIe driverAnton Schubert2015-08-17-8/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds a PCI driver for the controllers found on Marvell MVEBU SoCs. Besides the driver, this patch also removes the statically defined PCI MBUS windows. As they are not needed anymore, since this PCIe driver now creates the windows dynamically. Tested on Armada XP db-mv784mp-gp eval board using an Intel E1000 PCIe card in all 3 PCIe slots. And on the Armada 38x db-88f6820-gp eval board using this Intel E1000 PCIe card in the PCIe 0 slot. This port was done in cooperation with Anton Schubert. Signed-off-by: Anton Schubert <anton.schubert@gmx.de> Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Dirk Eibach <eibach@gdsys.de>
* | arm: mvebu: Add complete SDRAM ECC scrubbingStefan Roese2015-08-17-6/+139
| | | | | | | | | | | | | | | | | | | | | | | | This patch introduces the SDRAM scrubbing for ECC enabled board to fill/initialize the ECC bytes. This is done via the XOR engine to speed up the process. The scrubbing is a 2-stage process: 1) SPL scrubs the area 0 - 0x100.0000 (16MiB) for the main U-Boot 2) U-Boot scrubs the remaining SDRAM area(s) Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
* | arm: mvebu: dram.c: Rework dram_init() and dram_init_banksize()Stefan Roese2015-08-17-9/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | Rework these functions so that dram_init_banksize() does not call dram_init() again. It only needs to set the banksize values in the bdinfo struct. Make sure to also clip the size of the last bank if it exceeds the maximum allowed value of 3 GiB (0xc000.0000). Otherwise other address windows (e.g. PCIe) will overlap with this memory window. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
* | arm: mvebu: Display ECC enabled / disabled upon bootupStefan Roese2015-08-17-0/+19
| | | | | | | | | | | | | | | | | | This patch adds "(ECC enabled)" or "(ECC disabled)" to the DRAM bootup text. Making it easier for board with SPD DIMM's to see, if ECC is enabled or not. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
* | arm: mvebu: Enable USB EHCI support on Armada XPStefan Roese2015-08-17-0/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch enables the USB EHCI support for the Marvell Armada XP (AXP) SoCs. In compatism to the Armada 38x (A38x), the AXP needs to configure the USB PLL and the USB PHY's specifically in U-Boot. The A38x has done this already in the bin_hdr (SPL U-Boot). Without this, accessing the controller registers in U-Boot or Linux will hang the CPU. Additionally, the AXP uses a different USB EHCI base address. This patch also takes care of this by runtime SoC detection in the Marvell EHCI driver. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Anton Schubert <anton.schubert@gmx.de> Cc: Marek Vasut <marex@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
* | arm: mvebu: Enable NAND controller on MVEBU SoC'sStefan Roese2015-08-17-2/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch enables the NAND controller on the Armada XP/38x and provides a new function that returns the NAND controller input clock. This function will be used by the MVEBU NAND driver. As part of this patch, the multiple BIT macro definitions are moved to a common place in soc.h. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Peter Morrow <peter@senient.com> Cc: Luka Perkov <luka.perkov@sartura.hr>
* | arm: mvebu: Disable MBUS error propagationStefan Roese2015-08-17-0/+6
| | | | | | | | | | | | | | | | | | Accessing MBUS windows not backed-up by e.g. PCIe devices will hang the SoC. Disable MBUS error propagation back to CPU allows to read 0xffffffff instead of hanging the SoC. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
* | arm: mvebu: Flush caches and disable MMU only on A38xStefan Roese2015-08-17-7/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Only with disabled MMU its possible to switch the base register address on Armada 38x. Without this the SDRAM located at >= 0x4000.0000 is also not accessible, as its still locked to cache. So to fully release / unlock this area from cache, we need to first flush all caches, then disable the MMU and disable the L2 cache. On Armada XP this does not seem to be needed. Even worse, with this code added, I sometimes see strange input charactes loss from the console. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
* | arm: mvebu: Setup the MBUS bridge registersStefan Roese2015-08-17-0/+58
| | | | | | | | | | | | | | | | | | | | | | | | | | | | With this patch, the MBUS bridge registers (base and size) are configured upon each call to mbus_dt_setup_win(). This is needed, since the board code can also call this function in later boot stages. As done in the maxbcm board. This is needed to fix a problem with the secondary CPU's not booting in Linux on AXP. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Peter Morrow <peter@senient.com> Cc: Luka Perkov <luka.perkov@sartura.hr>
* | arm: mvebu: Change MBUS base addresses and sizesStefan Roese2015-08-17-10/+16
| | | | | | | | | | | | | | | | | | This patch changes the MBUS base addresses and sizes to use more generic names and also adds defines for the sizes. It also moves the base address to higher addresses. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
* | arm: mvebu/armada100: dram.c: Remove CONFIG_SYS_BOARD_DRAM_INITStefan Roese2015-08-17-4/+0
| | | | | | | | | | | | | | | | CONFIG_SYS_BOARD_DRAM_INIT is not defined anywhere. So lets get rid of all references here. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
* | arm: lpc32xx: gpio macro for pin mappingSylvain Lemieux2015-08-17-0/+40
| | | | | | | | | | | | Add LPC32xx GPIO interface macro for pin mapping. Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com>
* | lpc32xx: cpu: add support for soft resetSylvain Lemieux2015-08-17-6/+17
| | | | | | | | | | | | | | | | Add support for optional soft reset (i.e. "RESOUT_N" not asserted during reset). To be compatible with the original U-Boot code, when the "addr" parameter is 0, a hard is performed; for any other values, a soft reset is done. Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com>
* | arm: lpc32xx: mux: add missing registersSylvain Lemieux2015-08-17-1/+18
|/ | | | | | | Add missing registers in struct definition. Update GPIO MUX base register to match GPIO base (refer to "LPC32x0 User manual" Rev. 3 - 22 July 2011). Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com>
* Merge git://git.denx.de/u-boot-x86Tom Rini2015-08-14-189/+386
|\
| * x86: minnowmax: Define and enable interrupt setupSimon Glass2015-08-14-3/+66
| | | | | | | | | | | | | | | | Set up interrupts correctly so that Linux can use all devices. Use savedefconfig to regenerate the defconfig file. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| * x86: Return -1 when reading a PCI config register failsSimon Glass2015-08-14-3/+6
| | | | | | | | | | | | | | | | This can fail for internal reasons, so return a sensible value rather than a random one. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
generated by cgit v1.1 at 2025-01-03 22:02:51 +0000