summaryrefslogtreecommitdiff
path: root/arch
Commit message (Collapse)AuthorAgeLines
* arm: mvebu: Consolidate board Kconfig options into one fileStefan Roese2016-01-14-4/+17
| | | | | | | | Merging all the board specific Kconfig options into the main Kconfig file for mach-mvebu makes things easier to maintain. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
* arm: mvebu: Print CPU and SDRAM frequency upon startupStefan Roese2016-01-14-8/+113
| | | | | | | | | | | | | | | With this patch, the CPU and the DDR frequencies will get printed in the U-Boot startup messages. Resulting in such a log: U-Boot 2016.01-rc2-00188-gb8eeaec-dirty (Dec 21 2015 - 12:32:35 +0100) SoC: MV78460-B0 at 1600 MHz I2C: ready DRAM: 4 GiB (800 MHz, ECC not enabled) ... Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
* arm: mvebu: Make serdes setup on Armada XP less noisyStefan Roese2016-01-14-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Change some of the PEX configuration output lines from always output to only ouput upon specific debug enabling. This changes the SPL output from: U-Boot SPL 2016.01-rc2-00037-g9353a7f (Dec 10 2015 - 10:27:42) High speed PHY - Version: 2.1.5 (COM-PHY-V20) Update Device ID PEX0782611ab Update Device ID PEX1782611ab Update Device ID PEX2782611ab Update Device ID PEX3782611ab Update Device ID PEX8782611ab Update PEX Device ID 0x78260 High speed PHY - Ended Successfully DDR3 Training Sequence - Ver 5.7.4 DDR3 Training Sequence - Ended Successfully to: U-Boot SPL 2016.01-rc2-00037-g9353a7f-dirty (Dec 10 2015 - 10:32:04) High speed PHY - Version: 2.1.5 (COM-PHY-V20) High speed PHY - Ended Successfully DDR3 Training Sequence - Ver 5.7.4 DDR3 Training Sequence - Ended Successfully Resulting in a little faster bootup time. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
* arm: mvebu: Don't include "netdev.h" in cpu.cStefan Roese2016-01-14-1/+0
| | | | | | | | | This is not needed any more since the switch to DM / DTS network initialization on MVEBU. Lets remove it, as it otherwise leads to compilation warning when CONFIG_NET is not enabled. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
* arm: mvebu: Add support for MV78260Stefan Roese2016-01-14-5/+29
| | | | | | | | | | This patch adds support for the dual core Armada XP variant, the MV78260. It has some minor differences to the 4-core MV78460, e.g. only 12 serdes lanes. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Phil Sutter <phil@nwl.cc>
* arm: mvebu: Don't use 0 as board ID as its used for the custom boardsStefan Roese2016-01-14-1/+1
| | | | | | | | | Using board ID 0 is reserved for the non-Marvell "custom" boards. So move the board ID's to reflect this. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Phil Sutter <phil@nwl.cc>
* arm: mvebu: Simplify code in setup_usb_phys() a bitStefan Roese2016-01-14-5/+5
| | | | | | | | Use the clrbits() / setbits() functions instead of clrsetbits() when bit are only cleared or set. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
* arm: mvebu: Don't disable cache at startup on Armada XP at allStefan Roese2016-01-14-12/+13
| | | | | | | | | | This patch leaces the cache configuration untouched for the AXP in the setup done by the BootROM. Resulting in the cache still being enabled at the startup of U-Boot. This leads to a slightly faster boot to the U-Boot prompt (or Linux of course). Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
* arm: mvebu: Don't call arch_cpu_init() from SPL at allStefan Roese2016-01-14-21/+8
| | | | | | | | | | | | | | This patch removes the call to arch_cpu_init() in the SPL U-Boot version. As SPL does not need all the configuration done in this function. And also does not need the reconfiguration of the internal register address to 0xf1000000. This will be done by the main U-Boot later on. This also fixes a problem with the timer not beeing initialized on AXP, as needed for the mdelay in the setup_usb_phys(). This will now only be called once in main U-Boot. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
* arm: mvebu: Add v7_outer_cache_disable function for AXP & A38xStefan Roese2016-01-14-0/+8
| | | | | | | | | | | | Add functionality to correctly disable the L2 cache on the Armada XP and 38x platforms. Without this, booting into Linux on ClearFog (A38x) results in a hangup without any output on the serial console at all. Even with earlyprintk enabled. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
* arm: mvebu: Enable L2 cache on Armada XPStefan Roese2016-01-14-9/+25
| | | | | | | | | | | | | | | | | | Until now, the L2 cache was never enabled again in U-Boot. To get even better performance (bootup time), lets enable the L2 cache in U-Boot. This code was taken from the Linux kernel. A performance gain was measured on the DB-MV784MP-GP board by testing with tftpboot and sata commands. This patch also cleans up the L2 cache related code. And makes sure that the L2 cache is only disabled once. Please note that A38x still runs with L2 cache disabled. And needs to be enabled for this SoC in a separate patch if needed or desired. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
* arm: mvebu: Add SolidRun ClearFog Armada 38x initial supportStefan Roese2016-01-14-0/+514
| | | | | | | | | | | | | | | | | | | | This patch adds basic support for the SolidRun ClearFog Armada 38x based board to mainline U-Boot. Supported interfaces / devices are: - DDR3 - UART - MMC - Ethernet port 0 (connected to dedicated PHY) - I2C The included DT source was taken from Russell King's ftp server: http://www.home.arm.linux.org.uk/~rmk/clearfog/ With only minor modifications, like the addition of some aliases and the "u-boot,dm-pre-reloc" property. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Rabeeh Khoury <rabeeh@solid-run.com> Cc: Luka Perkov <luka.perkov@sartura.hr>
* arm: mvebu: Move some defines to common include fileStefan Roese2016-01-14-0/+6
| | | | | | | | | This patch moves some config options to the mvebu common include file. Making it easier to not forget these defines for new boards. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Dirk Eibach <dirk.eibach@gdsys.cc>
* net: mvneta: Convert to driver modelStefan Roese2016-01-14-28/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update this driver to support driver model. As all MVEBU boards using this driver are converted with this patch, the non-driver-model code can be removed completely. This is also the reason why this patch is quite big and includes a) the driver change and b) the platform change. As its not git-bisect save otherwise. With this conversion, some parameters are now extracted from the DT instread of using the config header defines. The supported properties right now are: PHY-mode ("phy-mode") and PHY-address ("reg"). The base addresses for the ethernet controllers can be removed from the header files as well. Please note that this patch also removes the E1000 network driver from some MVEBU config headers. This is necessary, as with DM_ETH configured and the e1000 driver enabled, the PCI driver also needs to support DM. But the MVEBU PCI(e) driver still needs to get ported to DM. When this is done, the E1000 driver can be enabled again. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Dirk Eibach <dirk.eibach@gdsys.cc> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Simon Glass <sjg@chromium.org>
* arm: mvebu: armada-388-gp.dts: Add ethernet aliasesStefan Roese2016-01-14-0/+2
| | | | | | | | Adding these aliases enables the update of the MAC addresses from within U-Boot. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
* arm: mvebu: Add armada-xp-maxbcm.dts for maxbcm boardStefan Roese2016-01-14-1/+251
| | | | | | | | | This is needed for the upcoming ethernet DM conversion of the maxbcm board. The configuration of the PHY is then extracted from the DT instead of using the defines from the config header. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
* arm: mvebu: Add SPI driver model supportStefan Roese2016-01-14-3/+22
| | | | | | | | | | | | This patch enables the DM support for the SPI driver and the SPI NOR flash chips. Some MVEBU boards boot from SPI NOR, so adding the aliases and enabling CONFIG_DM_SEQ_ALIAS is needed here. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Dirk Eibach <dirk.eibach@gdsys.cc> Cc: Simon Glass <sjg@chromium.org>
* arm: mvebu: Add DM and OF_CONTROL support to SPLStefan Roese2016-01-14-65/+32
| | | | | | | | | | | | | | | | | | | | | | This patch adds full DM support to the SPL on MVEBU. Currently only serial is supported. Other drivers will follow. This patch also adds the necessary config values for the DEBUG UART to the MVEBU defconfig files. This came in handy while implementing this DM support. Additionally, the mvebu specific SPL linker script is removed and this common one is used instead: arch/arm/cpu/u-boot-spl.lds This common linker script already handles all special cases. No need to reinvent the wheel for MVEBU here. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Dirk Eibach <dirk.eibach@gdsys.cc> Cc: Simon Glass <sjg@chromium.org>
* arm: mvebu/kirkwood: Use common timer functionsStefan Roese2016-01-14-124/+22
| | | | | | | | | | By using the common timer functions for mvebu/kirkwood we can get rid of quite a lot of code. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Simon Guinot <simon.guinot@sequanux.org> Cc: Valentin Longchamp <valentin.longchamp@keymile.com>
* arm: dts: am4372: add qspi register maps for memory mapMugunthan V N2016-01-13-1/+4
| | | | | | | | Add qspi memory map address to device tree. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jteki@openedev.com>
* arm: dts: dra72-evm: add spi-flash comaptible for flashMugunthan V N2016-01-13-1/+1
| | | | | | | | | In U-Boot most flashes uses "spi-flash" as compatible to bind the device to flash driver, so adding "spi-flash" compatible to m25p80 node. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
* arm: dts: dra7-evm: add spi-flash comaptible for flashMugunthan V N2016-01-13-1/+1
| | | | | | | | | In U-Boot most flashes uses "spi-flash" as compatible to bind the device to flash driver, so adding "spi-flash" compatible to m25p80 node. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
* arm: dts: am437x-gp-evm: add spi-flash comaptible for flashMugunthan V N2016-01-13-1/+1
| | | | | | | | | In U-Boot most flashes uses "spi-flash" as compatible to bind the device to flash driver, so adding "spi-flash" compatible to m25p80 node. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
* arm: dts: dra7: add qspi register maps for memory map and control moduleMugunthan V N2016-01-13-2/+5
| | | | | | | | Add qspi memory map and control module register maps to device tree. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jteki@openedev.com>
* dts: dra7: add spi alias for qspiMugunthan V N2016-01-13-0/+1
| | | | | | | | | add spi alias for qspi so that spi probes the device and driver successfully. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jteki@openedev.com>
* Merge git://git.denx.de/u-boot-dmTom Rini2016-01-12-97/+56
|\
| * sandbox: eth-raw-os.c: Ensure that our interface name is not too longTom Rini2016-01-12-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | Coverity notes that we do not ensure when we copy ifname we still have space left to ensure NULL termination. As cannot control the size of ifr_name we must make sure that our argument will not overflow the buffer. Reported-by: Coverity (CID 131094) Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * rockchip: Use the debug UART on rk3036Simon Glass2016-01-12-65/+8
| | | | | | | | | | | | | | Rather than using a new debug UART implementation, use the standard one provided by U-Boot. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Thomas Chou <thomas@wytron.com.tw>
| * dm: Convert PCI MMC over to use DM PCI APISimon Glass2016-01-12-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | At present pci_mmc_init() does not correctly use the PCI function since the list it passes is not terminated. The array size passed to pci_mmc_init() is actually not used correctly. Fix this and adjust the pci_mmc_init() to scan all available MMC devices. Adjust this code to use the new driver model PCI API. This should move over to the new MMC uclass at some point. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| * dm: tegra: net: Convert tegra boards to driver model for EthernetSimon Glass2016-01-12-0/+1
| | | | | | | | | | | | | | | | | | Adjust all Tegra boards to use driver model for Ethernet, now that the required drivers are converted. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * dm: x86: pci: Adjust bios_run_on_x86() to use the DM PCI APISimon Glass2016-01-12-1/+2
| | | | | | | | | | | | | | | | This function should take a struct udevice rather than pci_dev_t. Update it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
| * dm: pci: video: Convert video and pci_rom to use DM PCI APISimon Glass2016-01-12-2/+2
| | | | | | | | | | | | | | | | | | | | Adjust these files to use the driver-model PCI API instead of the legacy functions. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
| * dm: Convert bios_interrupts to use DM PCI APISimon Glass2016-01-12-13/+23
| | | | | | | | | | | | | | | | | | Adjust this code to use driver model for devices where possible. Since existing users have not been converted the old code must remain. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
| * dm: x86: ivybridge: Convert graphics init to use DM PCI APISimon Glass2016-01-12-12/+12
| | | | | | | | | | | | | | | | | | Use the driver-model PCI functions here where possible. For now we have to search for the device with pci_bus_find_bdf() but at some point we can put this in a proper driver and avoid this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | ARM: uniphier: add dump command for DDR Multi PHY registersMasahiro Yamada2016-01-13-0/+339
| | | | | | | | | | | | | | | | The ProXstream2/PH1-LD6b is integrated with a new IP for DDR PHY which is not register-compatible with the former SoCs. Add a new command to support the register dump of this IP. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* | ARM: uniphier: add DRAM init code for ProXstream2/PH1-LD6bMasahiro Yamada2016-01-13-0/+826
| | | | | | | | | | | | | | | | As mentioned in the log of commit 019df879a93e2 (ARM: uniphier: add ProXstream2 and PH1-LD6b support), the DRAM init code was missing for a long time. Finally, here it is. SPL works now. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* | ARM: uniphier: move headers out of include/mach directoryMasahiro Yamada2016-01-13-129/+188
| | | | | | | | | | | | | | These headers are only included locally in arch/arm/mach-uniphier/. There is no reason to export them by putting in the mach/ directory. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* | ARM: uniphier: move cmd_pinmon.c to boot-mode subdirectoryMasahiro Yamada2016-01-13-1/+2
| | | | | | | | | | | | | | This command shows the boot mode pins, so it would be more at home in the boot-mode subdirectory. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* | ARM: uniphier: move cmd_ddrphy.c to dram subdirectoryMasahiro Yamada2016-01-13-1/+2
| | | | | | | | | | | | | | This command shows the register dump of the DDR PHY, so it would be more at home in the dram subdirectory. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* | ARM: uniphier: kill bogus header includesMasahiro Yamada2016-01-13-15/+0
|/ | | | | | These includes are not necessary. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* am33xx/am43xx: Add platform data for GPIOsTom Rini2016-01-08-0/+23
| | | | | | | | | | | | | On these platforms we have many cases of boards that enable device model and GPIO support but do not enable OF_CONTROL and pass in a device tree with the binary. We need to bring in the platform data here as well. Tested on Beaglebone Black. Reported-by: Robert Nelson <robertcnelson@gmail.com> Reported-by: Francisco Aguerre <franciscoaguerre@gmail.com> Reported-by: Jason Kridner <jkridner@beagleboard.org> Signed-off-by: Tom Rini <trini@konsulko.com>
* powerpc: Various typo fixes under arch/powerpc/cpu/mpc83xxRobert P. J. Day2016-01-08-20/+20
| | | | Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
* test: add sandbox timer to test.dtsThomas Chou2016-01-07-0/+5
| | | | | | | | Add missing sandbox timer to test.dts, so that test-dm works. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
* Merge git://git.denx.de/u-boot-mpc85xxTom Rini2016-01-07-0/+2
|\
| * powerpc, mpc5xxx: fix missing bootflag initHeiko Schocher2016-01-05-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | since: commit: f05ad9ba "Add a way to skip relocation" tqm5200s board fails to boot. Reason is that board_init_f has a function parameter bootflag, which is not setup in in arch/powerpc/cpu/mpc5xxx/start.S _start So board_init_f gets a undefined bootflag, currently the gd pointer address. Unfortunately this address sets the GD_FLG_SKIP_RELOC bit, so u-boot code gets not relocated and u-boot does not boot ... Init bootflag with 0, and tqm5200 boots fine again. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: York Sun <yorksun@freescale.com>
* | Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2016-01-03-5/+50
|\ \ | |/ |/|
| * imx_common: check for Serial Downloader in spl_boot_deviceStefano Babic2016-01-03-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Check for bmode before reading the boot device to check if a serial downloader is started, and returns UART if the serial downloader is set, letting SPL to wait for an image if CONFIG_SPL_YMODEM_SUPPORT is set. This allows to load again a SPL based board with imx_usb_loader together with a tool such as kermit. Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Tim Harvey <tharvey@gateworks.com> CC: Fabio Estevam <Fabio.Estevam@freescale.com> CC: Eric Nelson <eric.nelson@boundarydevices.com> Reviewed-by: Eric Nelson <eric@nelint.com> Tested-by: Eric Nelson <eric@nelint.com>
| * ARM: mxs: allow boards to select DC-DC switching clock sourceMichael Heimpold2016-01-03-0/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For some board designs, it might be useful to switch the DC-DC clock source to something else rather the default 24 MHz, e.g. for EMI reasons. For this, override the mxs_power_setup_dcdc_clocksource function in your board support files. Example: void mxs_power_setup_dcdc_clocksource(void) { mxs_power_switch_dcdc_clocksource(POWER_MISC_FREQSEL_20MHZ); } Signed-off-by: Michael Heimpold <mhei@heimpold.de> Cc: Marek Vasut <marex@denx.de> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Marek Vasut <marex@denx.de>
| * imx: ddr: drop duplicated debug infoPeng Fan2016-01-03-1/+0
| | | | | | | | | | | | | | Drop duplicated debug info for tcl. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
| * imx: mx6: fix reg base address when runtime usagePeng Fan2015-12-07-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Should use parenthese to wrap the macro definition, otherwise we will encounter error like the following: " if (base_addr != LCDIF1_BASE_ADDR) { puts("Wrong LCD interface!\n"); return -EINVAL; } " Without this patch, we will always encounter "Wrong LCD interface". Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
generated by cgit v1.1 at 2024-11-06 18:37:30 +0000