summaryrefslogtreecommitdiff
path: root/arch
Commit message (Collapse)AuthorAgeLines
* imx: dma: correct MXS_DMA_ALIGNMENTPeng Fan2015-05-26-1/+1
| | | | | | | | | | | | | | | | We should not hardcode MXS_DMA_ALIGNMENT to 32, since we can not guarantee that socs' cache line size is 32 bytes. If on chips whose cache line size is 64 bytes, error occurs: " NAND: ERROR: v7_dcache_inval_range - start address is not aligned - 0xbdf1d1a0 ERROR: v7_dcache_inval_range - stop address is not aligned - 0xbdf1f4a0 ERROR: v7_dcache_inval_range - start address is not aligned - 0xbdf1d1a0 " Align MXS_DMA_ALIGNMENT with ARCH_DMA_MINALIGN whose value is same to CONFIG_SYS_CACHELINE_SIZE if CONFIG_SYS_CACHELINE_SIZE defined. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Acked-by: Marek Vasut <marex@denx.de>
* wandboard: Switch to SPL supportFabio Estevam2015-05-21-0/+1
| | | | | | | | | | | | | | | | | Currently we need to build one U-boot image for each of the wandboard variants: quad, dual-lite and solo. By switching to SPL we can support all these variants with a single binary, which is very convenient. Based on the work from Richard Hu. Tested kernel booting on the three boards. Signed-off-by: Richard Hu <hakahu@gmail.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Tested-by: Vagrant Cascadian <vagrant@aikidev.net> Reviewed-by: Stefano Babic <sbabic@denx.de>
* imx: mx6: add display of CPU temperature grade in print_cpuinfo()Tim Harvey2015-05-19-4/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | When CONFIG_IMX6_THERMAL is defined print the CPU temperature grade info along with the current temperature. Before: CPU: Temperature 42 C After: CPU: Automotive temperature grade (-40C to 125C) at 42C CPU: Industrial temperature grade (-40C to 105C) at 42C CPU: Extended Commercial temperature grade (-20C to 105C) at 42C Cc: Stefan Roese <sr@denx.de> Cc: Eric Nelson <eric.nelson@boundarydevices.com> Cc: Heiko Schocher <hs@denx.de> Cc: Nikita Kiryanov <nikita@compulab.co.il> Cc: Jon Nettleton <jon.nettleton@gmail.com> Cc: Jason Liu <r64343@freescale.com> Cc: Ye Li <b37916@freescale.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Markus Niebel <Markus.Niebel@tq-group.com> Cc: Peng Fan <b51431@freescale.com> Tested-by: Nikolay Dimitrov <picmaster@mail.bg> Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* imx: mx6: add get_cpu_temp_grade to obtain cpu temperature grade from OTPTim Harvey2015-05-19-0/+39
| | | | | | | | | | | | | | | The MX6 has a temperature grade defined by OCOTP_MEM0[7:6] which is at 0x480 in the Fusemap Description Table in the reference manual. Return this value as well as min/max temperature based on the value. Note that the IMX6SDLRM and the IMX6SXRM do not indicate this in the their Fusemap Description Table however Freescale has confirmed that these eFUSE bits match the description within the IMX6DQRM and that they will be added to the next revision of the respective reference manuals. This has been tested with IMX6 Automative and Industrial parts. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* imx: mx6: display max cpu frequency in print_cpuinfo()Tim Harvey2015-05-19-1/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Display the max CPU frequency as well as the current running CPU frequency if the max CPU frequency is available and differs from the current CPU frequency. Before: CPU: Freescale i.MX6Q rev1.2 at 792 MHz After - using an 800MHz IMX6DL (running at its max) CPU: Freescale i.MX6DL rev1.1 at 792 MHz After - using a 1GHz IMX6Q (not running at its max): CPU: Freescale i.MX6Q rev1.2 996 MHz (running at 792 MHz) Cc: Stefan Roese <sr@denx.de> Cc: Eric Nelson <eric.nelson@boundarydevices.com> Cc: Heiko Schocher <hs@denx.de> Cc: Nikita Kiryanov <nikita@compulab.co.il> Cc: Jon Nettleton <jon.nettleton@gmail.com> Cc: Jason Liu <r64343@freescale.com> Cc: Ye Li <b37916@freescale.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Markus Niebel <Markus.Niebel@tq-group.com> Cc: Peng Fan <b51431@freescale.com> Tested-by: Nikolay Dimitrov <picmaster@mail.bg> Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* imx: mx6: add get_cpu_speed_grade_hz func to return MHz speed grade from OTPTim Harvey2015-05-19-0/+42
| | | | | | | | | | | | | | | The IMX6 has four different speed grades determined by eFUSE SPEED_GRADING indicated by OCOTP_CFG3[17:16] which is at 0x440 in the Fusemap Description Table. Return this frequency so that it can be used elsewhere. Note that the IMX6SDLRM and the IMX6SXRM do not indicate this in the their Fusemap Description Table however Freescale has confirmed that these eFUSE bits match the description within the IMX6DQRM and that they will be added to the next revision of the respective reference manuals. These have been tested with IMX6 Quad/Solo/Dual-light 800Mhz and 1GHz grades. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* mx6: add OTP bank1 registersTim Harvey2015-05-19-0/+19
| | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* arm: mx6: ddr: set fast-exit on DDR3 if pd_fast_exit specifiedTim Harvey2015-05-19-1/+2
| | | | | | | | | | | | | Commit fa8b7d66f49f0c7bd41467fe78f6488d8af6976a introduced fast-exit support to the MMDC however enabling it on the DDR3 got missed. Make sure we enable it on the DDR3 as well. Gateworks uses Micron memory as well as Winbond in MX6. We have found in testing that we need to enable fast-exit for Winbond stability. Gateworks boards are currently the only boards using the MX6 SPL and enabling fast-exit mode. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* arm/imx-common: Fix warning 'get_reset_cause' defined but not usedPrabhakar Kushwaha2015-05-19-0/+2
| | | | | | | | | | | Fix below warning arch/arm/imx-common/cpu.c:29:14: warning: ‘get_reset_cause’ defined but not used static char *get_reset_cause(void) Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: Eric Nelson <eric.nelson@boundarydevices.com> Acked-by: Stefano Babic <sbabic@denx.de>
* imx: mx6sx enable SION for i2c pin muxPeng Fan2015-05-19-20/+20
| | | | | | | | | | | | Enable IOMUX_CONFIG_SION for all I2C pin mux settings, otherwise we will get erros when doing i2c operations. error log like the following: " wait_for_sr_state: failed sr=81 cr=a0 state=2020 i2c_init_transfer: failed for chip 0xb retry=1 " Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* arm: mx6: ddr3: Remove dead codeNikolay Dimitrov2015-05-15-22/+0
| | | | | | | imx6 mmdc supports data rates up to 1066 MT/s, so remove the code handling higher data rates. Signed-off-by: Nikolay Dimitrov <picmaster@mail.bg>
* mx6: Set shared override bit in PL310 AUX_CTRL registerFabio Estevam2015-05-15-0/+10
| | | | | | | | | | | | | | | | | | | | | | Having bit 22 cleared in the PL310 Auxiliary Control register (shared attribute override enable) has the side effect of transforming Normal Shared Non-cacheable reads into Cacheable no-allocate reads. Coherent DMA buffers in Linux always have a Cacheable alias via the kernel linear mapping and the processor can speculatively load cache lines into the PL310 controller. With bit 22 cleared, Non-cacheable reads would unexpectedly hit such cache lines leading to buffer corruption. This was inspired by a patch from Catalin Marinas [1] and also from recent discussions in the linux-arm-kernel list [2] where Russell King and Rob Herring suggested that bootloaders should initialize the cache. [1] http://lists.infradead.org/pipermail/linux-arm-kernel/2010-November/031810.html [2] https://lkml.org/lkml/2015/2/20/199 Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com>
* hummingboard: Remove mx6solo specific supportFabio Estevam2015-05-15-5/+0
| | | | | | | | | | Hummingboard dual, dual-lite and solo are now supported via SPL mechanism. Remove the previous hummingboard support, which does not use SPL and supported only the solo variant. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* imx: dek_blob: Add explicit include for mapmemUlises Cardenas2015-05-15-0/+1
| | | | | | | | | | | Boards such as imx6q_sabresd might not have mapmem.h as part of their common library. This causes a build error if the DEK blob command is enabled. Fix: make explicit the include of mapmem.h Signed-off-by: Ulises Cardenas <Ulises.Cardenas@freescale.com> Reviewed-by: Ruchika Gupta <Ruchika.gupta@freescale.com>
* arm: mx6: Clamp MMDC and DDR3 clocks for timing calculationsNikolay Dimitrov2015-05-15-7/+23
| | | | | | | | | | | | | | | | This is proposal for clamping the MMDC/DDR3 clocks to the maximum supported frequencies as per imx6 SOC models, and for dynamically calculating valid clock value based on mem_speed. Currently the code uses impossible values for mem_speed (1333, 1600 MT/s) for calculating the DDR timings, and uses fixed clock (528 or 400 MHz) which doesn't take into account DDR3 memory limitations. Signed-off-by: Nikolay Dimitrov <picmaster@mail.bg> Cc: Fabio Estevam <festevam@gmail.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Tim Harvey <tharvey@gateworks.com> Cc: Eric Nelson <eric.nelson@boundarydevices.com>
* sandbox: dts: add sandbox_pmic.dtsi and include it to sandbox.dts and test.dtsPrzemyslaw Marczak2015-05-14-0/+88
| | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds dtsi file for Sandbox PMIC. It fully describes the PMIC by: - i2c emul node - with a default settings of 16 registers - 2x buck regulator nodes - 2x ldo regulator nodes The default register settings are set with preprocessor macros: - VAL2REG(min[uV/uA], step[uV/uA], val[uV/uA]) - VAL2OMREG(mode id) Both defined in file: - include/dt-bindings/pmic/sandbox_pmic.h The Voltage ranges of each regulator can be found in: - include/power/sandbox_pmic.h The new file is included into: - sandbox.dts - test.dts Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Tested on sandbox: Tested-by: Simon Glass <sjg@chromium.org>
* test: dm: test.dts - move to sandbox dts directoryPrzemyslaw Marczak2015-05-14-0/+231
| | | | | | | | | | | | | | | | | The file test.dts from driver model test directory, was compiled by call dtc in script: test/dm/test-dm.sh. This doesn't allow for including of dtsi files and using of C preprocessor routines in this dts file. Since the mentioned script builds U-Boot before tests, then moving the test.dts file into sandbox dts directory is reasonable. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Tested on sandbox: Tested-by: Simon Glass <sjg@chromium.org>
* odroid: dts: add 'voltage-regulators' description to max77686 nodePrzemyslaw Marczak2015-05-14-0/+253
| | | | | | | | | Adding regulators subnode to fdt max77686 node, allows properly init regulators by the max77686 regulator driver. This enables the complete functionality of the regulator command. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Simon Glass <sjg@chromium.org>
* pmic: max77686 set the same compatible as in the kernelPrzemyslaw Marczak2015-05-14-4/+4
| | | | | | | This commit also updates the proper dts files. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Simon Glass <sjg@chromium.org>
* i2c: mxc: refactor i2c driver and support dmPeng Fan2015-05-14-8/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1. Introduce a new structure `struct mxc_i2c_bus`, this structure will used for non-DM and DM. 2. Remove `struct mxc_i2c_regs` structure, but use register offset to access registers based on `base` entry of `struct mxc_i2c_bus`. 3. Remove most `#ifdef I2C_QUIRK_REG`. Using driver_data to contain platform flags. A new flag is introduced, I2C_QUIRK_FLAG. 4. Most functions use `struct mxc_i2c_bus` as one of the parameters. Make most functions common to DM and non-DM, try to avoid duplicated code. 5. Support DM, but pinctrl is not included. Pinmux setting is still set by setup_i2c, but we do not need bus_i2c_init for DM. 6. struct i2c_parms and struct sram_data are removed. 7. Remove bus_i2c_read bus_i2c_write prototype in header file. The frist paramter of bus_i2c_init is modified to i2c index. Add new prototype i2c_idle_bus and force_bus_idle. Since bus_i2c_init is not good for DM I2C and pinctrl is missed, we use a weak function for i2c_idle_bus. Board file take the responsibility to implement this function, like this: " int i2c_idle_bus(struct mxc_i2c_bus *i2c_bus) { if (i2c_bus->index == 0) force_bus_idle(i2c_pads_info0); else if (i2c_bus->index == 1) force_bus_idle(i2c_pads_info1); else xxxxxx } " 8. Introduce a weak function, enable_i2c_clk 9. Tested on an i.MX7 platform. Log info: => dm tree Class Probed Name ---------------------------------------- root [ + ] root_driver simple_bus [ ] |-- soc simple_bus [ ] | |-- aips-bus@30000000 simple_bus [ ] | | |-- anatop@30360000 simple_bus [ ] | | `-- snvs@30370000 simple_bus [ ] | |-- aips-bus@30400000 simple_bus [ ] | `-- aips-bus@30800000 i2c [ ] | |-- i2c@30a20000 i2c [ ] | `-- i2c@30a40000 simple_bus [ ] `-- regulators => i2c dev 0 Setting bus to 0 => i2c probe Valid chip addresses: 08 50 => i2c md 8 31 0031: 08 08 08 08 08 08 08 08 08 08 08 08 08 08 08 08 Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Acked-by: Simon Glass <sjg@chromium.org>
* imx: mx27 move GPIO_PORTx to gpio.hPeng Fan2015-05-14-22/+20
| | | | | | | | | | | | | | These GPIO_PORTx macros should be in gpio.h, but not in imx-regs.h. Also, imx-regs.h and iomux-v3.h has same macro defintion for GPIO_PORTx, and both of them are included in mxc_i2c.c(include mxc_i2c.h). This will incur build warnings with macro redefinition. Since iomux-v3.h is not compatible with mx27, we can not simply include iomux-v3.h for mx27, so move the GPIO_PORTx to gpio.h to fix the build warning. Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* sandbox: Support wide-screen LCD emulationSimon Glass2015-05-14-2/+2
| | | | | | Increase the LCD size to 1366x768. Signed-off-by: Simon Glass <sjg@chromium.org>
* sandbox: Add missing errno.h includes in a few filesSimon Glass2015-05-14-0/+1
| | | | | | These files use error numbering, so add the include. Signed-off-by: Simon Glass <sjg@chromium.org>
* sandbox: Correct error handling in state_read_file()Simon Glass2015-05-14-1/+1
| | | | | | | This function should return a useful error for U-Boot, rather than -1. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
* arm: Add a prototype for save_boot_params_ret()Simon Glass2015-05-14-0/+16
| | | | | | | | It is convenient for some boards to implement save_boot_params() in C rather than assembler. Provide a way to return in this case. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
* arm: Include the .got section in the binarySimon Glass2015-05-14-1/+2
| | | | | | | Commit 47ed5dd0 dropped the .got section from U-Boot binaries. This is needed for some relocations, and causes failures if missing. Add it back. Signed-off-by: Simon Glass <sjg@chromium.org>
* tpm: Rename Infineon TPM to slb9645ttSimon Glass2015-05-14-2/+2
| | | | | | This name is used in Linux, so use it in U-Boot. Signed-off-by: Simon Glass <sjg@chromium.org>
* sunxi: ohci: Add ohci usb host controller supportHans de Goede2015-05-14-0/+4
| | | | | | | | | | | | | This commit adds support for the OHCI companion controller, which makes usb-1 devices directly plugged into to usb root port work. Note for now this switches usb-keyboard support for sunxi back from int-queue support to the old interrupt polling method. Adding int-queue support to the ohci code and switching back to int-queue support is in the works. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* arch/arm/lib/bootm-fdt.c: Guard the include of <asm/armv7.h>Tom Rini2015-05-14-0/+2
| | | | | | | | | With d6b72da0 we started including this file unconditionally. This isn't allowed in a file that we also use on armv8. This will get cleaned up a bit better once we really start using these same features (and have similar fdt updates needed) on armv8. Signed-off-by: Tom Rini <trini@konsulko.com>
* Merge branch 'master' of git://git.denx.de/u-boot-tegraTom Rini2015-05-14-222/+1393
|\
| * ARM: tegra: move NVIDIA common files to arch/arm/mach-tegraMasahiro Yamada2015-05-13-1/+326
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All the Tegra boards borrow the files from board/nvidia/common/ directory, i.e., board/nvidia/common/* are not vendor-common files, but SoC-common files. Move NVIDIA common files to arch/arm/mach-tegra/ to clean up Makefiles. As arch/arm/mach-tegra/board.c already exists, this commit renames board/nvidia/common/board.c to arch/arm/mach-tegra/board2.c, expecting they will be consolidated as a second step. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Cc: Stephen Warren <swarren@nvidia.com> Cc: Tom Warren <twarren@nvidia.com> Cc: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * jetson-tk1: Add PSCI configuration options and reserve secure codeIan Campbell2015-05-13-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The secure world code is relocated to the MB just below the top of 4G, we reserve it in the FDT (by setting CONFIG_ARMV7_SECURE_RESERVE_SIZE) but it is not protected in h/w. Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Tested-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * tegra: Boot in non-secure mode by defaultJan Kiszka2015-05-13-1/+1
| | | | | | | | | | | | | | | | | | | | Upstream Linux is broken with default configs when PSCI, thus non-secure mode is enabled. So the user should explicitly enable this mode, e.g. when she disabled CONFIG_CPU_IDLE in Linux (in which case it's safe to use). We can revert this workaround once Linux got fixed. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * ARM: tegra: Enable SMMU when going non-secureThierry Reding2015-05-13-0/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | Make sure to enable the SMMU when booting the kernel in non-secure mode. This is necessary because some of the SMMU registers are restricted to TrustZone-secured requestors, hence the kernel wouldn't be able to turn the SMMU on. At the same time, enable translation for all memory clients for the same reasons. The kernel will still be able to control SMMU IOVA translation using the per-SWGROUP enable bits. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * tegra: Set CNTFRQ for secondary CPUsJan Kiszka2015-05-13-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We only set CNTFRQ in arch_timer_init for the boot CPU. But this has to happen for all cores. Fixing this resolves problems of KVM with emulating the generic timer/counter. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Tested-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * tegra124: Reserve secure RAM using MC_SECURITY_CFG{0, 1}_0Ian Campbell2015-05-13-0/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These registers can be used to prevent non-secure world from accessing a megabyte aligned region of RAM, use them to protect the u-boot secure monitor code. At first I tried to do this from s_init(), however this inexplicably causes u-boot's networking (e.g. DHCP) to fail, while networking under Linux was fine. So instead I have added a new weak arch function protect_secure_section() called from relocate_secure_section() and reserved the region there. This is better overall since it defers the reservation until after the sec vs. non-sec decision (which can be influenced by an envvar) has been made when booting the os. Signed-off-by: Ian Campbell <ijc@hellion.org.uk> [Jan: tiny style adjustment] Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Tested-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * tegra124: Add PSCI support for Tegra124Jan Kiszka2015-05-13-0/+174
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is based on Thierry Reding's work and uses Ian Campell's preparatory patches. It comes with full support for CPU_ON/OFF PSCI services. The algorithm used in this version for turning CPUs on and off was proposed by Peter De Schrijver and Thierry Reding in http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/210881. It consists of first enabling CPU1..3 via the PMC, just to powergate them again with the help of the Flow Controller. Once the Flow Controller is in place, we can leave the PMC alone while processing CPU_ON and CPU_OFF PSCI requests. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * ARM: Add board-specific initialization hook for PSCIJan Kiszka2015-05-13-0/+7
| | | | | | | | | | | | | | | | Tegra boards will have to initialize power management for the PSCI support this way. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * tegra: Make tegra_powergate_power_on publicJan Kiszka2015-05-13-1/+2
| | | | | | | | | | | | | | | | | | | | | | Will be used for unpowergating CPUs. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Tested-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * virt-dt: Allow reservation of secure region when in a RAM carveoutJan Kiszka2015-05-13-0/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In this case the secure code lives in RAM, and hence the memory node in the device tree needs to be adjusted. This avoids that the OS will map and possibly access the reservation. Add support for setting CONFIG_ARMV7_SECURE_RESERVE_SIZE to carve out such a region. We only support cutting off memory from the beginning or the end of a RAM bank as we do not want to increase their number (which would happen if punching a hole) for simplicity reasons This will be used in a subsequent patch for Jetson-TK1. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * tegra124: Add more registers to struct mc_ctlrIan Campbell2015-05-13-2/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | I will need mc_security_cfg0/1 in a future patch and I added the rest while debugging, so thought I might as well commit them. Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Tested-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * ARM: Put target PC for PSCI CPU_ON on per-CPU stackJan Kiszka2015-05-13-9/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Use a per-CPU variable for saving the target PC during CPU_ON operations. This allows us to run this service independently on targets that have more than 2 cores and also core-local power control. CC: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Tested-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * ARM: Factor out reusable psci_get_cpu_stack_topJan Kiszka2015-05-13-10/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | This algorithm will be useful on Tegra as well, plus we will need it for making _psci_target_pc per-CPU. CC: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Tested-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * ARM: Factor out reusable psci_cpu_entryJan Kiszka2015-05-13-18/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | _sunxi_cpu_entry can be converted completely into a reusable psci_cpu_entry. Tegra124 will use it as well. As with psci_disable_smp, also the enabling is designed to be overloaded in cased SMP is not controlled via ACTLR. CC: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Tested-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * ARM: Factor out reusable psci_cpu_off_commonJan Kiszka2015-05-13-62/+78
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move parts of sunxi's psci_cpu_off into psci_cpu_off_common, namely cache disabling and flushing, clrex and the disabling of SMP for the dying CPU. These steps are apparently generic for ARMv7 and will be reused for Tegra124 support. As the way of disabled SMP is not architectural, though commonly done via ACLTR, the related function can be overloaded. CC: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Tested-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * ARM: Factor out common psci_get_cpu_idJan Kiszka2015-05-13-5/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Will be required for obtaining the ID of the current CPU in shared PSCI functions. The default implementation requires a dense ID space and only supports a single cluster. Therefore, the functions can be overloaded in cases where these assumptions do not hold. CC: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Tested-by: Ian Campbell <ijc@hellion.org.uk> Acked-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * ARM: Clean up CONFIG_ARMV7_NONSEC/VIRT/PSCI conditionsJan Kiszka2015-05-13-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_ARMV7_VIRT depends on CONFIG_ARMV7_NONSEC, thus doesn't need to be taken into account additionally. CONFIG_ARMV7_PSCI is only set on boards that support CONFIG_ARMV7_NONSEC, and it only works on those. CC: Tang Yuantian <Yuantian.Tang@freescale.com> CC: York Sun <yorksun@freescale.com> CC: Steve Rae <srae@broadcom.com> CC: Andre Przywara <andre.przywara@linaro.org> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Tested-by: Alison Wang <alison.wang@freescale.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * tegra124: video: Add full link training for eDPSimon Glass2015-05-13-0/+4
| | | | | | | | | | | | | | | | | | Add full link training as a fallback in case the fast link training fails. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * tegra: video: support eDP displays on Tegra124 devicesSimon Glass2015-05-13-0/+58
| | | | | | | | | | | | | | | | | | Connect up the clocks and the eDP driver to make these displays work with Tegra124-based devices. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * tegra: dts: nyan-big: Add definitions for eDP displaySimon Glass2015-05-13-0/+43
| | | | | | | | | | | | | | Add the various host1x peripherals to allow an eDP display to be connected. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
generated by cgit v1.1 at 2024-11-09 09:15:21 +0000