summaryrefslogtreecommitdiff
path: root/arch
Commit message (Collapse)AuthorAgeLines
* armv8/ls1043aqds: Spilt off board device treeWenbin Song2016-01-27-2/+17
| | | | | | | | Move new /chosen node out of the board device tree. Signed-off-by: Wenbin Song <wenbin.song@nxp.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: York Sun <york.sun@nxp.com>
* secure_boot: enable chain of trust for PowerPC platformsAneesh Bansal2016-01-27-0/+21
| | | | | | | | | | | | | | | Chain of Trust is enabled for PowerPC platforms for Secure Boot. CONFIG_BOARD_LATE_INIT is defined. In board_late_init(), fsl_setenv_chain_of_trust() is called which will perform the following: - If boot mode is non-secure, return (No Change) - If boot mode is secure, set the following environmet variables: bootdelay = 0 (To disable Boot Prompt) bootcmd = CONFIG_CHAIN_BOOT_CMD (Validate and execute Boot script) Signed-off-by: Aneesh Bansal <aneesh.bansal@nxp.com> Acked-by: Ruchika Gupta <ruchika.gupta@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* secure_boot: enable chain of trust for ARM platformsAneesh Bansal2016-01-27-0/+6
| | | | | | | | | | | | | | Chain of Trust is enabled for ARM platforms (LS1021 and LS1043). In board_late_init(), fsl_setenv_chain_of_trust() is called which will perform the following: - If boot mode is non-secure, return (No Change) - If boot mode is secure, set the following environmet variables: bootdelay = 0 (To disable Boot Prompt) bootcmd = CONFIG_CHAIN_BOOT_CMD (Validate and execute Boot script) Signed-off-by: Aneesh Bansal <aneesh.bansal@nxp.com> Acked-by: Ruchika Gupta <ruchika.gupta@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* secure_boot: create function to determine boot modeAneesh Bansal2016-01-27-0/+8
| | | | | | | | | A function is created to detrmine if the boot mode is secure or non-secure for differnt SoC's. Signed-off-by: Aneesh Bansal <aneesh.bansal@nxp.com> Acked-by: Ruchika Gupta <ruchika.gupta@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* secure_boot: split the secure boot functionality in two partsAneesh Bansal2016-01-27-23/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are two phases in Secure Boot 1. ISBC: In BootROM, validate the BootLoader (U-Boot). 2. ESBC: In U-Boot, continuing the Chain of Trust by validating and booting LINUX. For ESBC phase, there is no difference in SoC's based on ARM or PowerPC cores. But the exit conditions after ISBC phase i.e. entry conditions for U-Boot are different for ARM and PowerPC. PowerPC: If Secure Boot is executed, a separate U-Boot target is required which must be compiled with a diffrent Text Base as compared to Non-Secure Boot. There are some LAW and TLB settings which are required specifically for Secure Boot scenario. ARM: ARM based SoC's have a fixed memory map and exit conditions from BootROM are same irrespective of boot mode (Secure or Non-Secure). Thus the current Secure Boot functionlity has been split into two parts: CONFIG_CHAIN_OF_TRUST This will have the following functionality as part of U-Boot: 1. Enable commands like esbc_validate, esbc_halt 2. Change the environment settings based on bootmode, determined at run time: - If bootmode is non-secure, no change - If bootmode is secure, set the following: - bootdelay = 0 (Don't give boot prompt) - bootcmd = Validate and execute the bootscript. CONFIG_SECURE_BOOT This is defined only for creating a different compile time target for secure boot. Traditionally, both these functionalities were defined under CONFIG_SECURE_BOOT. This patch is aimed at removing the requirement for a separate Secure Boot target for ARM based SoC's. CONFIG_CHAIN_OF_TRUST will be defined and boot mode will be determine at run time. Another Security Requirement for running CHAIN_OF_TRUST is that U-Boot environemnt must not be picked from flash/external memory. This cannot be done based on bootmode at run time in current U-Boot architecture. Once this dependency is resolved, no separate SECURE_BOOT target will be required for ARM based SoC's. Currently, the only code under CONFIG_SECURE_BOOT for ARM SoC's is defining CONFIG_ENV_IS_NOWHERE Signed-off-by: Aneesh Bansal <aneesh.bansal@nxp.com> Acked-by: Ruchika Gupta <ruchika.gupta@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* secure_boot: include/configs: move definition of CONFIG_CMD_BLOBAneesh Bansal2016-01-27-0/+2
| | | | | | | | | | CONFIG_CMD_BLOB must be defined in case of Secure Boot. It was earlier defined in all config files. The definition has been moved to a common file which is included by all configs. Signed-off-by: Aneesh Bansal <aneesh.bansal@nxp.com> Acked-by: Ruchika Gupta <ruchika.gupta@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* secure_boot: include/configs: make secure boot header file uniformAneesh Bansal2016-01-27-0/+5
| | | | | | | | | | | | | | The file fsl_secure_boot.h must be included in config file for Secure Boot. This is not required to be protected by any macro. CONFIG_FSL_CAAM must be defined and CONFIG_CMD_HASH should be turned on. The above was missing in some config files and all files have been made uniform in this respect. Signed-off-by: Aneesh Bansal <aneesh.bansal@nxp.com> Acked-by: Ruchika Gupta <ruchika.gupta@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* armv8: ls2040a: Add support of LS2040A SoCPratiyush Mohan Srivastava2016-01-25-0/+2
| | | | | | | | | Freescale's LS2040A is a another personality of LS2080A SoC without AIOP support consisting of 4 armv8 cores. Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@freescale.com> Acked-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* armv8: Enable all 8 DPMAC ports in LS2080A PersonalityPratiyush Mohan Srivastava2016-01-25-5/+0
| | | | | | | | | | LS2080A has support for 8 DPMAC ports out of which only 5 ports can be used at a time. Enabling all 8 DPMAC ports of LS2080A personality. Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@freescale.com> Acked-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* armv8: fsl-layerscape: fixes lsch2 serdes registers defineShaohui Xie2016-01-25-20/+47
| | | | | | | Fixes lsch2 SerDes registers define according to LS1043A RM Rev D. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Reviewed-by: York Sun <york.sun@nxp.com>
* arm: ls1021a: Adjust sata register default valuesTang Yuantian2016-01-25-5/+5
| | | | | | | | Updated the default sata register values to enhance the performance and stability. Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> Reviewed-by: York Sun <york.sun@nxp.com>
* driver/ddr/fsl: Add workaround for A009663Shengzhou Liu2016-01-25-0/+9
| | | | | | | | | | | | Erratum A-009663 workaround requires to set DDR_INTERVAL[BSTOPRE] to 0 before setting DDR_SDRAM_CFG[MEM_EN] and set DDR_INTERVAL[BSTOPRE] to the desired value after DDR initialization has completed. When DDR controller is configured to operate in auto-precharge mode(DDR_INTERVAL[BSTOPRE]=0), this workaround is not needed. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <york.sun@nxp.com>
* armv8: fsl-lsch3: fixup SYSCLK frequency in device treePrabhakar Kushwaha2016-01-25-0/+3
| | | | | | | | | | | | SYSCLK frequency is dependent on on-board switch settings. It may vary as per requirement. boot-loader is aware of board switch configurations. So Fixup Linux device tree from boot-loader. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> CC: Mingkai Hu <Mingkai.Hu@freescale.com> Reviewed-by: York Sun <york.sun@nxp.com>
* fsl/ddr: Add workaround for ERRATUM_A009942Shengzhou Liu2016-01-25-0/+1
| | | | | | | | | | | | During the receive data training, the DDRC may complete on a non-optimal setting that could lead to data corruption or initialization failure. Workaround: before setting MEM_EN, set DEBUG_29 register with specific value for different data rates. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <york.sun@nxp.com>
* rockchip: Add support for Raxda Rock 2Simon Glass2016-01-21-0/+13
| | | | | | | | | | | | This board includes an RK3288 SoC on a SOM. It can be mounted on a base-board which provides a wide range of peripherals. So far this is verified to boot to a prompt from a microSD card. The serial console works as well as HDMI. Thanks to Tom Cubie for sending me a board. Signed-off-by: Simon Glass <sjg@chromium.org>
* rockchip: rock2: dts: Make changes for U-BootSimon Glass2016-01-21-0/+21
| | | | | | Add the required pre-relocation tags and SDRAM init information for U-Boot. Signed-off-by: Simon Glass <sjg@chromium.org>
* rockchip: rock2: Bring in device tree files from LinuxSimon Glass2016-01-21-0/+458
| | | | | | | Bring in the current device tree files for rock2 from linux/next commit 719d6c1. Hopefully this is the latest one. Signed-off-by: Simon Glass <sjg@chromium.org>
* rockchip: dts: Sync up SPDIF node with LinuxSimon Glass2016-01-21-0/+21
| | | | | | | This has been added and we have references to it in the rock2 board. Add this node. Signed-off-by: Simon Glass <sjg@chromium.org>
* rockchip: jerry: Enable EDP and HDMI video outputSimon Glass2016-01-21-0/+6
| | | | | | | | | | | Enable these devices using the VOPL video output device. We explicitly disable VOPB in the device tree to avoid it taking over. Since this device has an LCD display this comes up by default. If the display fails for some reason then it will attempt to use HDMI. It is possible to force it to fail (and thus fall back to HDMI) by puting 'return -EPERM' at the top of rk_edp_probe(). For now there is no easy way to select between the two. Signed-off-by: Simon Glass <sjg@chromium.org>
* rockchip: spl: Support full-speed CPU in SPLSimon Glass2016-01-21-0/+64
| | | | | | | | Add a feature which speeds up the CPU to full speed in SPL to minimise boot time. This is only supported for certain boards (at present only jerry). Signed-off-by: Simon Glass <sjg@chromium.org>
* rockchip: jerry: Fix the SDRAM timingSimon Glass2016-01-21-1/+1
| | | | | | | There is a minor error in the SDRAM timing. It does not seem to affect anything so far. Fix it just in case. Signed-off-by: Simon Glass <sjg@chromium.org>
* rockchip: spl: Drop MMC support code when not neededSimon Glass2016-01-21-2/+4
| | | | | | When the board does not use MMC SPL this code is a waste of space. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
* rockchip: Tidy up the register-access macrosSimon Glass2016-01-21-3/+4
| | | | | | | | | These work reasonable well, but there are a few errors: - Brackets should be used to avoid unexpected side-effects - When setting bits, the corresponding upper 16 bits should be set also Signed-off-by: Simon Glass <sjg@chromium.org>
* rockchip: sdram: Use syscon_get_first_range() where possibleSimon Glass2016-01-21-14/+3
| | | | | | | This is a shortcut to obtaining a register address. Use it where possible, to simplify the code. Signed-off-by: Simon Glass <sjg@chromium.org>
* rockchip: sdram: Tidy up a few commentsSimon Glass2016-01-21-2/+2
| | | | | | Fix spaces in two comments in this file. Signed-off-by: Simon Glass <sjg@chromium.org>
* rockchip: Add a simple 'clock' commandSimon Glass2016-01-21-0/+24
| | | | | | Add a command that displays the PLLs and their current rate. Signed-off-by: Simon Glass <sjg@chromium.org>
* rockchip: Don't skip low-level initSimon Glass2016-01-21-0/+8
| | | | | | | At present the low-level init is skipped on rockchip. Among other things this means that the instruction cache is left disabled. Fix this. Signed-off-by: Simon Glass <sjg@chromium.org>
* rockchip: video: Add a video-output driverSimon Glass2016-01-21-0/+349
| | | | | | | | Some rockchip SoCs include video output (VOP). Add a driver to support this. It can output via a display driver (UCLASS_DISPLAY) and currently HDMI and eDP are supported. Signed-off-by: Simon Glass <sjg@chromium.org>
* rockchip: video: Add a display driver for rockchip eDPSimon Glass2016-01-21-0/+636
| | | | | | | Some Rockchip SoCs support embedded DisplayPort output. Add a display driver for this so that these displays can be used on supported boards. Signed-off-by: Simon Glass <sjg@chromium.org>
* rockchip: video: Add a display driver for rockchip HDMISimon Glass2016-01-21-0/+456
| | | | | | | | | | | | Some Rockchip SoCs support HDMI output. Add a display driver for this so that these displays can be used on supported boards. Unfortunately this driver is not fully functional. It cannot reliably read EDID information over HDMI. This seems to be due to the clocks being incorrect - the I2C bus speed appears to be up to 100x slower than the clock settings indicate. The root cause may be in the clock logic. Signed-off-by: Simon Glass <sjg@chromium.org>
* rockchip: Rename the CRU_MODE_CON fieldsSimon Glass2016-01-21-29/+29
| | | | | | These should match the datasheet naming. Adjust them. Signed-off-by: Simon Glass <sjg@chromium.org>
* pwm: rockchip: Add a PWM driver for Rockchip SoCsSimon Glass2016-01-21-0/+41
| | | | | | Add a simple driver which implements the standard PWM uclass interface. Signed-off-by: Simon Glass <sjg@chromium.org>
* rockchip: jerry: Enable the Chrome OS ECSimon Glass2016-01-21-0/+4
| | | | | | Turn on the EC and enable the keyboard. Signed-off-by: Simon Glass <sjg@chromium.org>
* rockchip: clk: Make rkclk_get_clk() SoC-specificSimon Glass2016-01-21-29/+0
| | | | | | | | | | | | The current method assumes that clocks are numbered from 0 and we can determine a clock by its number. It is safer to use an ID in the clock's platform data to avoid the situation where another clock is bound before the one we expect. Move the existing code into rk3036 since it still works there. Add a new implementation for rk3288. Signed-off-by: Simon Glass <sjg@chromium.org>
* rockchip: reset: Use the rk_clr/setreg() interfaceSimon Glass2016-01-21-2/+2
| | | | | | Use this function in preference to the macro. Signed-off-by: Simon Glass <sjg@chromium.org>
* rockchip: sdram: Use the rk_clr/setreg() interfaceSimon Glass2016-01-21-4/+3
| | | | | | Use this function in preference to the macro. Signed-off-by: Simon Glass <sjg@chromium.org>
* rockchip: clock: Add a function to find a clock by IDSimon Glass2016-01-21-0/+12
| | | | | | | | The current approach of using uclass_get_device() is error-prone. Another clock (for example a fixed-clock) may cause it to break. Add a function that does a proper search. Signed-off-by: Simon Glass <sjg@chromium.org>
* rockchip: jerry: Disable pmic-int-1 setup to avoid a hangSimon Glass2016-01-21-1/+4
| | | | | | | This hangs when activated (by probing the PMIC). Disable it for now until we understand the root cause. Signed-off-by: Simon Glass <sjg@chromium.org>
* rockchip: Use pwrseq for MMC start-up on jerrySimon Glass2016-01-21-4/+11
| | | | | | | This is defined in the device tree in Linux. Copy over the settings so that this can be used instead of hard-coding the reset line. Signed-off-by: Simon Glass <sjg@chromium.org>
* rockchip: Convert the PMU IOMUX registers into an arraySimon Glass2016-01-21-4/+8
| | | | | | | | | This is easier to deal with when using generic code since it allows us to use a register index instead of naming each register. Adjust it, adding an enum to improve readability. Signed-off-by: Simon Glass <sjg@chromium.org>
* rockchip: Avoid using MMC code when not booting from MMCSimon Glass2016-01-21-0/+2
| | | | | | This saves some code space in SPL which is useful on jerry. Signed-off-by: Simon Glass <sjg@chromium.org>
* ARM: bootm: Try to use relocated ramdiskJeffy Chen2016-01-21-1/+11
| | | | | | | | | After boot_ramdisk_high(), ramdisk would be relocated to initrd_start & initrd_end, so use them instead of rd_start & rd_end. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
* Merge git://git.denx.de/u-boot-dmTom Rini2016-01-21-7/+58
|\
| * dm: video: test: Add tests for the video uclassSimon Glass2016-01-20-0/+7
| | | | | | | | | | | | | | | | | | Add tests that check that the video console is working correcty. Also check that text output produces the expected result. Test coverage includes character output, wrapping and scrolling. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de>
| * dm: video: sandbox: Convert sandbox to use driver model for videoSimon Glass2016-01-20-0/+1
| | | | | | | | | | | | | | | | Now that driver model support is available, convert sandbox over to use it. We can remove a few of the special hooks that sandbox currently has. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de>
| * arm: ls1021atwr: Enable driver model lpuart serial driverBin Meng2016-01-20-1/+17
| | | | | | | | | | | | | | | | | | | | | | Convert ls1021atwr_nor_lpuart to driver model support. As a start, enable lpuart serial port driver. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Alison Wang <alison.wang@nxp.com> Tested-by: Alison Wang <alison.wang@nxp.com> Acked-by: Simon Glass <sjg@chromium.org>
| * arm: ls1021atwr: Split off board device treeBin Meng2016-01-20-3/+18
| | | | | | | | | | | | | | Move /chosen node out of the board device tree. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
| * arm: ls1021atwr: Convert to driver model and enable serial supportBin Meng2016-01-20-4/+4
| | | | | | | | | | | | | | | | Convert ls1021atwr_nor to driver model support. As a start, enable ns16550 serial port driver. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
| * arm: dts: dra7-evm: add tick-timer to chosen nodeMugunthan V N2016-01-20-0/+1
| | | | | | | | | | | | | | Specify timer2 to be used as tick-timer in chosen node. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
| * arm: dts: dra72-evm: add tick-timer to chosen nodeMugunthan V N2016-01-20-0/+1
| | | | | | | | | | | | | | Specify timer2 to be used as tick-timer in chosen node. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
generated by cgit v1.1 at 2024-11-14 22:52:42 +0000