summaryrefslogtreecommitdiff
path: root/arch
Commit message (Collapse)AuthorAgeLines
* exynos: Simplify calling of exynos_dp_phy_ctrl()Simon Glass2016-05-25-2/+2
| | | | | | | | This function controls enabling the EDP PHY. Rename it and drop the existing weak functions, which are confusing. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* exynos: Allow PWM0 pinmux to be set upSimon Glass2016-05-25-0/+6
| | | | | | | | This is commonly used for LCD backlight control. Add pinmux support for it on exynos5250 and 5420. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* exynos: dts: Add pwm device tree nodeSimon Glass2016-05-25-0/+14
| | | | | | | Add this node from Linux v4.4 so that PWMs can be used in U-Boot. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* exynos: pwm: Add a driver for the exynos5 PWMSimon Glass2016-05-25-0/+3
| | | | | | | | This driver supports the standard PWM API. There are 5 PWMs. Four are used normally and the last is normally used as a timer. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* exynos: video: Move mipi_lcd_device_dt into a functionSimon Glass2016-05-25-1/+1
| | | | | | | | | In preparation for making this a parameter, move it into the function that sets it up. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* exynos: video: Move struct exynos_platform_mipi_dsim into vidinfoSimon Glass2016-05-25-2/+3
| | | | | | | | | Put the pointer to this structure in struct vidinfo so that we can reference it without it being global. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* exynos: video: Remove use of vidinfo_t typedefSimon Glass2016-05-25-1/+2
| | | | | | | | | Use 'struct vidinfo' instead so that we can change this to a struct with a different name in future. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* exynos: video: Drop dead codeSimon Glass2016-05-25-2/+0
| | | | | | | | | | We always use device tree with video, so can drop these #ifdefs. Some of the hardware addresses are not needed either. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* board: samsung: add initial Espresso7420 board supportThomas Abraham2016-05-25-0/+44
| | | | | | | | | | Espresso7420 is a development/evaluation board for Exynos7420 SoC. It includes multiple onboard compoments (EMMC/Codec) and various interconnects (USB/HDMI). Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* arm: exynos: add support for Exynos7420 SoCThomas Abraham2016-05-25-0/+135
| | | | | | | | | Add support for Exynos7420 SoC. The Exynos7420 SoC has four Cortex-A57 and four Cortex-A53 CPUs and includes various peripheral controllers. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* arm: exynos: realign the code to allow support for newer 64-bit platformsThomas Abraham2016-05-25-6/+40
| | | | | | | | | | | | | The existing Exynos 32-bit platform support needs to be realigned in order to support newer 64-bit Exynos platforms. The driver model will be utlized for drivers on the 64-bit Exynos platforms and so some of the older platform support code would not be required for the newer 64-bit Exynos platforms. Cc: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriqTom Rini2016-05-24-20/+109
|\
| * driver/ddr/fsl: Add workaround for erratum A-010165Shengzhou Liu2016-05-18-0/+1
| | | | | | | | | | | | | | | | | | During DDR-2133 operation, the transmit data eye margins determined during the memory controller initialization may be sub-optimal, set DEBUG_29[12] and DEBUG_29[13:16] = 4'b0100 before MEM_EN is set. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * crypto/fsl: add support for multiple SEC engines initializationAlex Porosanu2016-05-18-0/+9
| | | | | | | | | | | | | | | | | | For SoCs that contain multiple SEC engines, each of them needs to be initialized (by means of initializing among others the random number generator). Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * arch/arm, arch/powerpc: add # of SEC engines on the SOCAlex Porosanu2016-05-18-0/+9
| | | | | | | | | | | | | | | | | | | | Some SOCs, specifically the ones in the C29x familiy can have multiple security engines. This patch adds a system configuration define which indicates the maximum number of SEC engines that can be found on a SoC. Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * arch/arm: add SEC JR0 offsetAlex Porosanu2016-05-18-10/+28
| | | | | | | | | | | | | | | | | | Freescale PPC SoCs do not hard-code security engine's Job Ring 0 address, rather a define is used. This patch adds the same functionality to the ARM based SoCs (i.e. LS1/LS2 and i.MX parts) Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv7: ls102xa: spl: fix the macro name of MMC modeQianyu Gong2016-05-18-1/+1
| | | | | | | | | | | | | | MMCSD_MODE_FAT has been renamed to MMCSD_MODE_FS by commit 205b4f33. Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: fsl-layerscape: spl: fix the macro name of MMC modeQianyu Gong2016-05-18-1/+1
| | | | | | | | | | | | | | MMCSD_MODE_FAT has be renmaed to MMCSD_MODE_FS by commit 205b4f33. Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: fsl-layerscape: spl: remove duplicate init_early_memctl_regs()Qianyu Gong2016-05-18-3/+0
| | | | | | | | | | | | | | | | init_early_memctl_regs() is also be called in board_early_init_f(). So remove the duplicated call in spl code. Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: fsl-layerscape: Remove unnecessary flushing dcacheAlison Wang2016-05-18-3/+0
| | | | | | | | | | | | | | | | | | As the issue about the stack will get corrupted when switching between the early and final mmu tables is fixed by commit 70e21b064, the workaround to flush dcache is unnecessary and should be removed. Signed-off-by: Alison Wang <alison.wang@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8/ls1043a: update the node for QSPI supportYuan Yao2016-05-18-2/+3
| | | | | | | | | | | | | | | | The address value and size value set for QSPI dts node "reg" property have type of u64 on arm64. Signed-off-by: Yuan Yao <yao.yuan@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8/fdt: add fixup_crypto_nodeAlex Porosanu2016-05-17-0/+19
| | | | | | | | | | | | | | | | | | For Qoriq PPC&ARM v7 platforms, the crypto node is being fixup'ed in order to update the SEC internal version (aka SEC ERA). This patch adds the same functionality to the ARMv8 SoCs. Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * driver/ddr/fsl: Add workaround for erratum A-009801Shengzhou Liu2016-05-17-0/+1
| | | | | | | | | | | | | | | | The initial training for the DDRC may provide results that are not optimized. The workaround provides better read timing margins. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8/ls1043: Add workaround for DDR erratum A-008850Shengzhou Liu2016-05-17-0/+37
| | | | | | | | | | | | | | | | | | Barrier transactions from CCI400 need to be disabled till the DDR is configured, otherwise it may lead to system hang. The patch adds workaround to fix the erratum. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-netTom Rini2016-05-24-1/+15
|\ \ | | | | | | | | | | | | | | | | | | Signed-off-by: Tom Rini <trini@konsulko.com> Conflicts: drivers/net/zynq_gem.c
| * | arm: dts: dra7: fix ethernet name with proper device addressMugunthan V N2016-05-24-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Fix typo error for cpsw device name with proper device address Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | arm: dts: dra7: add syscon node to cpsw to read mac addressMugunthan V N2016-05-24-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add syscon node to cpsw device node to read mac address from efuse. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | arm: dts: am4372: add syscon node to cpsw to read mac addressMugunthan V N2016-05-24-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add syscon node to cpsw device node to read mac address from efuse. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | ARM: omap5: add platform specific ethernet phy modes configurationsMugunthan V N2016-05-24-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add platforms specific phy mode configuration bits to be used to configure phy mode in control module. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* | | Merge branch 'master' of git://www.denx.de/git/u-boot-microblazeTom Rini2016-05-24-45/+150
|\ \ \
| * | | ARM: zynq: Simplify zynq configurationMichal Simek2016-05-24-42/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Extending Kconfig for adding new platform is a lot of work for nothing. Setting SYS_CONFIG_NAME directly in Kconfig and remove all dependencies on TARGET_ZYNQ_* options including SPL. As a side-effect it also remove custom init folder for ps7_init_gpl.* files. Folder is chosen based on device-tree file. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | | ARM64: zynqmp: Add SPL support supportMichal Simek2016-05-24-0/+111
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Support RAM and MMC boot mode in SPL also with SPL_FIT images. In MMC boot mode two boot options are available: 1) Boot flow with ATF(EL3) and full U-Boot(EL2): aarch64-linux-gnu-objcopy -O binary bl31.elf bl31.bin mkimage -A arm64 -O linux -T kernel -C none -a 0xfffe5000 -e 0xfffe5000 -d bl31.bin atf.ub cp spl/boot.bin <sdcard fat partition> cp atf.ub <sdcard fat partition> cp u-boot.bin <sdcard fat partition> 2) Boot flow with full U-Boot(EL3): cp spl/boot.bin <sdcard> cp u-boot*.img <sdcard> 3) emmc boot mode dd if=/dev/zero of=sd.img bs=1024 count=1024 parted sd.img mktable msdos parted sd.img mkpart p fat32 0% 100% kpartx -a sd.img mkfs.vfat /dev/mapper/loop0p1 mount /dev/mapper/loop0p1 /mnt/ cp spl/boot.bin /mnt cp u-boot.img /mnt cp u-boot.bin /mnt cp atf.ub /mnt umount /dev/mapper/loop0p1 kpartx -d sd.img cp sd.img /tftpboot/ and program it via u-boot tftpb 10000 sd.img mmcinfo mmc write 10000 0 $filesize mmc rescan mmc part ls mmc 0 psu_init() function contains low level SoC setup generated for every HW design by Xilinx design tools. xil_io.h is only supporting file to fix all dependencies from tools. The same solution was used on Xilinx Zynq. The patch also change CONFIG_SYS_INIT_SP_ADDR to the end of OCM which stays at the same location all the time. Bootrom expects starting address to be at 0xfffc0000 that's why this address is SPL_TEXT_BASE. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | | ARM64: zynqmp: Add missing u-boot,dm-pre-reloc to DTSIMichal Simek2016-05-24-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | Add missing u-boot,dm-pre-reloc to get IPs initialized. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | | ARM64: zynqmp: Align gic ranges for 64k in device treeAlexander Graf2016-05-24-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The GIC ranges in the zynqmp device tree are only 4kb aligned. Since commit 12e14066f we automatically deal with aliases GIC regions though, so we can map them transparently into guests even on 64kb page size systems. This patch makes use of that features and sets GICC and GICV to 64kb aligned and sized regions. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | | ARM: zynq: Call ps7_post_config() for SPLMichal Simek2016-05-24-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | If ps7_post_config() is defined call it. It is enabling for example level shifters for PL bitstreams. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | | ARM: zynq: Add support for SPL_LOAD_FITMichal Simek2016-05-24-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | Enable minimal function to be able to compile SPL_LOAD_FIT. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | | ARM: dts: zynq: describe SLCR as simple-mfd rather than simple-busMasahiro Yamada2016-05-24-1/+1
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 9f56917ab88a ("dm: core: make simple-bus compatible to simple-mfd") made possible to import the following commit: Linux commit: bc5ba9b98435bf76d92e0954da1784695aa449f1 The SLCR (System-Level Control Registers) block is an MFD (Multi Function Device) rather than a bus. "simple-mfd" seems a more suitable compatible string than "simple-bus". Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | | Merge branch 'master' of git://git.denx.de/u-boot-atmelTom Rini2016-05-24-1/+115
|\ \ \
| * | | ARM: sama5d2: Implement boot device autodetectionMarek Vasut2016-05-24-1/+67
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Implement support for saving ARM register R4 early during boot using save_boot_params . Implement support for decoding the stored register R4 value in spl_boot_device() to obtain boot device from which the SoC booted. This way, the SPL will always load U-Boot from the same device from which the SPL itself booted instead of using hard-coded boot device. This functionality is useful for example when booting sama5d2-xplained from SD card, where by default the SPL would try loading the U-Boot from eMMC and fail. This is because eMMC is on SDHCI0 (BOOT_DEVICE_MMC1), while SD slot is on SDHCI1 (BOOT_DEVICE_MMC2) and the SPL was hard-wired to always boot from BOOT_DEVICE_MMC1. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andreas Bießmann <andreas.devel@googlemail.com> Cc: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
| * | | ARM: at91: clock: complete the GCK's clock sourcesWenyou Yang2016-05-24-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the UPLL clock and master clock as a clock source for getting the generated clock frequency to complete its clock sources support. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
| * | | ARM: at91: clock: fix the GCK's clock sourceWenyou Yang2016-05-24-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Before enabling a generated clock whose source is from the UPLL clock, check and enable the UPLL clock. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
| * | | board: atmel: add SAMA5D2 PTC Engineering boardWenyou Yang2016-05-24-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The board supports following features: - Boot media support: NAND Flash/SPI Flash - Support ethernet - Support USB mass storage Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
| * | | ARM: at91: sama5d2: add macro & field definitionsWenyou Yang2016-05-24-0/+29
| |/ / | | | | | | | | | | | | | | | | | | They will be used on SAMA5D2 PTC board. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
* | | Merge branch 'master' of git://git.denx.de/u-boot-x86Tom Rini2016-05-23-7891/+9259
|\ \ \ | |/ / |/| |
| * | x86: Switch to use SMBIOS Kconfig options when writing SMBIOS tablesBin Meng2016-05-23-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | Make use of the newly added Kconfig options of board manufacturer and product name to write SMBIOS tables. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * | x86: kconfig: Add two options for SMBIOS manufacturer and product nameBin Meng2016-05-23-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | This introduces two Kconfig options to be used by SMBIOS tables: board manufacturer and product name. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * | x86: broadwell: Correct I/O APIC IDBin Meng2016-05-23-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Currently ID 2 is assgined to broadwell I/O APIC, however per chromebook_samus.dts 2 is the core#2 LAPIC ID. Now we change I/O APIC ID to 4 to avoid conflict. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * | x86: quark: Assign a unique I/O APIC IDBin Meng2016-05-23-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After power-on, both LAPIC and I/O APIC appear with the same APIC ID zero, which creates an ID conflict. When generating MP table, U-Boot reports zero as the LAPIC ID in the processor entry, and zero as the I/O APIC ID in the I/O APIC as well as the I/O interrupt assignment entries. Such MP table confuses Linux kernel and finally a kernel panic is seen during boot: BUG: unable to handle kernel paging request at ffff9000 IP: [<c101d462>] native_io_apic_write+0x22/0x30 *pdpt = 00000000014fb001 *pde = 00000000014ff067 *pte = 0000000000000000 Oops: 0002 [#1] Modules linked in: Pid: 1, comm: swapper Tainted: G W 3.8.7 #3 intel galileo/galileo EIP: 0060:[<c101d462>] EFLAGS: 00010086 CPU: 0 EIP is at native_io_apic_write+0x22/0x30 ... Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * | x86: Call lapic_setup() in interrupt_init()Bin Meng2016-05-23-7/+5
| | | | | | | | | | | | | | | | | | | | | Let's configure LAPIC in a common place - interrupt_init(). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * | x86: Remove SMP limitation in lapic_setup()Bin Meng2016-05-23-6/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | At present LAPIC is enabled and configured as virtual wire mode in lapic_setup() only when CONFIG_SMP is on. This limitation is however not necessary as for uniprocessor this is still needed. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.1 at 2024-11-10 11:49:15 +0000