summaryrefslogtreecommitdiff
path: root/arch
Commit message (Collapse)AuthorAgeLines
* keystone2: Move target selection to KconfigAndrew F. Davis2016-11-28-2/+2
| | | | | | | | | The config option TARGET_K2x_EVM is set by the k2x defconfigs to pick a board target, but the header configs also set K2x_EVM. This config is redundant, remove it and use TARGET_K2x_EVM everywhere in its place. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
* sunxi: add support for Nintendo NES Classic EditionFUKAUMI Naoki2016-11-28-0/+64
| | | | | | | | | Add board support for sun8i_r16 Nintendo NES Classic edition. Signed-off-by: FUKAUMI Naoki <naobsd@gmail.com> [jagan: Add commit message body] Signed-off-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
* arm: sunxi: do not force USB for arch-sunxiYann E. MORIN2016-11-28-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | Currently, USB is forced-enabled for the sunxi familly, and there is no way to disable it. However, USB takes a long time to initiliase, delaying the boot by up to 5 seconds (without any USB device attached!). This is a very long delay, especially in cases where USB booting is not wanted at all, and where the device is expected to boot relatively often (even in production). Change the way the dependencies are handled, by only forcibly selecting USB when CONFIG_DISTRO_DEFAULTS ("defaults suitable for booting general purpose Linux distributions") is set. This option defaults to y for the sunxi familly, so the current default behaviour is kept unchanged. Users interested in boot time and/or size will be able to disable this to further disable USB. With USB disabled, the time spent in U-Boot before handing control to the Linux kernel is about 1s now, down from ~5s (Nanopi Neo, sunxi H3). Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Cc: Ian Campbell <ijc@hellion.org.uk> Cc: Hans De Goede <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* efi_loader: Allow to compile helloworld.efi w/o bundling itAlexander Graf2016-11-27-3/+3
| | | | | | | | | | | | | | | | | Today we can compile a self-contained hello world efi test binary that allows us to quickly verify whether the EFI loader framwork works. We can use that binary outside of the self-contained test case though, by providing it to a to-be-tested system via tftp. This patch separates compilation of the helloworld.efi file from including it in the u-boot binary for "bootefi hello". It also modifies the efi_loader test case to enable travis to pick up the compiled file. Because we're now no longer bloating the resulting u-boot binary, we can enable compilation always, giving us good travis test coverage. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Tom Rini <trini@konsulko.com>
* Merge git://git.denx.de/u-boot-rockchipTom Rini2016-11-26-21/+697
|\
| * rockchip: Add support for veyron-minnie (ASUS Chromebook Flip)Simon Glass2016-11-25-1/+314
| | | | | | | | | | | | | | | | This adds support for the Asus Chromebook Flip, an RK3288-based clamshell device which can flip into 'tablet' mode. The device tree file comes from Linux v4.8. The SDRAM parameters are for 4GB Samsung LPDDR3. Signed-off-by: Simon Glass <sjg@chromium.org>
| * rockchip: Add support for veyron-mickey (Chromebit)Simon Glass2016-11-25-1/+289
| | | | | | | | | | | | | | | | This adds support for the Asus Chromebit, and RK3288-based device designed to plug directly into an HDMI monitor. The device tree file comes from Linux v4.8. Signed-off-by: Simon Glass <sjg@chromium.org>
| * rockchip: veyron: Adjust ARM clock after relocationSimon Glass2016-11-25-0/+44
| | | | | | | | | | | | | | | | Update board_init() to increase the ARM clock to the maximum speed on veyron boards. This makes quite a large difference in performance. With this change, speed goes from about 750 DMIPS to 2720 DMIPs. Signed-off-by: Simon Glass <sjg@chromium.org>
| * rockchip: Move jerry SDRAM settings into its own .dts fileSimon Glass2016-11-25-8/+11
| | | | | | | | | | | | | | The SDRAM settings are not common across all veyron models. Move the current settings into Jerry's file. Signed-off-by: Simon Glass <sjg@chromium.org>
| * rockchip: Rename jerry files to veyronSimon Glass2016-11-25-2/+2
| | | | | | | | | | | | | | | | | | | | | | At present we have a single rk3288-based Chromebook: chromebook_jerry. But all such Chromebooks can use the same binary with only device-tree differences. The family name is 'veyron', so rename the files accordingly. Also update the device-tree filename since this currently differs from Linux. Signed-off-by: Simon Glass <sjg@chromium.org>
| * rockchip: video: Check for device in useSimon Glass2016-11-25-5/+2
| | | | | | | | | | | | | | | | | | | | Check whether a display device is in use before using it. Add a comment as to why two displays cannot currently be used at the same time. This allows us to remove the device-tree change that disables vopb on jerry. Signed-off-by: Simon Glass <sjg@chromium.org>
| * rockchip: Allow jerry to use of-platdataSimon Glass2016-11-25-0/+2
| | | | | | | | | | | | | | This board always boots from SPI, so update the code to support that with of-platdata. The boot source is not currently available with of-platdata. Signed-off-by: Simon Glass <sjg@chromium.org>
| * dts: arm: rk3036: add usb vbus nodeKever Yang2016-11-25-4/+33
| | | | | | | | | | | | | | add fix regulator node for usb vbus power control. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
| * arm: rockchip: Fix typo in ROCKCHIP_RK3288 helpAndreas Färber2016-11-25-1/+1
| | | | | | | | | | | | | | UART,s -> UARTs, to avoid this spreading via copy&paste. Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Simon Glass <sjg@chromium.org>
| * arm: dts: Fix Rockchip sort orderAndreas Färber2016-11-25-1/+1
| | | | | | | | | | | | | | Sort rk3036 before rk3288. Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Simon Glass <sjg@chromium.org>
* | Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini2016-11-25-110/+909
|\ \ | |/ |/| | | | | | | | | Signed-off-by: Tom Rini <trini@konsulko.com> Conflicts: arch/arm/Kconfig
| * armv8: fsl-layerscape: Support loading 32-bit OS with PSCI enabledAlison Wang2016-11-22-0/+37
| | | | | | | | | | | | | | | | | | | | | | As PSCI and secure monitor firmware framework are enabled, this patch is to support loading 32-bit OS in such case. The default target exception level returned to U-Boot is EL2, so the corresponding work to switch to AArch32 EL2 and jump to 32-bit OS are done in U-Boot and secure firmware together. Signed-off-by: Alison Wang <alison.wang@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: fsl-layerscape: SMP support for loading 32-bit OSAlison Wang2016-11-22-0/+18
| | | | | | | | | | | | | | | | | | | | | | Spin-table method is used for secondary cores to load 32-bit OS. The architecture information will be got through checking FIT image and saved in the os_arch element of spin-table, then the secondary cores will check os_arch and jump to 32-bit OS or 64-bit OS automatically. Signed-off-by: Alison Wang <alison.wang@nxp.com> Signed-off-by: Chenhui Zhao <chenhui.zhao@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: Support loading 32-bit OS in AArch32 execution stateAlison Wang2016-11-22-67/+378
| | | | | | | | | | | | | | | | | | | | | | | | | | To support loading a 32-bit OS, the execution state will change from AArch64 to AArch32 when jumping to kernel. The architecture information will be got through checking FIT image, then U-Boot will load 32-bit OS or 64-bit OS automatically. Signed-off-by: Ebony Zhu <ebony.zhu@nxp.com> Signed-off-by: Alison Wang <alison.wang@nxp.com> Signed-off-by: Chenhui Zhao <chenhui.zhao@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * arm: exynos7420: remove custome low level init functionThomas Abraham2016-11-22-8/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove the custom low-level initialization function and reuse the default low-level initialization function. But this requires the ARMV8_MULTIENTRY config option to be enabled for Exynos7420. On Exynos7420, the boot CPU belongs to the second cluster and so with ARMV8_MULTIENTRY config option enabled, the 'branch_if_master' macro fails to detect the CPU as boot CPU. As a temporary workaround the CPU_RELEASE_ADDR is set to point to '_main'. Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Alison Wang <alison.wang@nxp.com> Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Reviewed-by: Alison Wang <alison.wang@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8/fsl-lsch3: Update code to release secondary coresPriyanka Jain2016-11-22-5/+66
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | NXP ARMv8 SoC LS2080A release all secondary cores in one-go. But other new SoCs like LS2088A, LS1088A release secondary cores one by one. Update code to release secondary cores based on SoC SVR Add code to release cores one by one for non LS2080A SoCs Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Raghav Dogra <raghav.dogra@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> [YS: remove "inline" from declaration of initiator_type] Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: fsl-layerscape: Add NXP LS2088A SoC supportPriyanka Jain2016-11-22-2/+71
| | | | | | | | | | | | | | | | | | | | | | | | The QorIQ LS2088A SoC is built on layerscape architecture. It is similar to LS2080A SoC with some differences like 1)Timer controller offset is different 2)It has A72 cores 3)It supports TZASC module Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: fsl-layerscape : Check SVR for initializing TZASCPriyanka Jain2016-11-22-1/+12
| | | | | | | | | | | | | | | | | | | | LS2080 SoC and its personalities does not support TZASC But other new SoCs like LS2088A, LS1088A supports TZASC Hence, skip initializing TZASC for Ls2080A based on SVR Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: fsl-layerscape: Update TZASC registers typePriyanka Jain2016-11-22-14/+14
| | | | | | | | | | | | | | | | | | | | | | TZASC registers like TZASC_GATE_KEEPER, TZASC_REGION_ATTRIBUTES are 32-bit regsiters. So while doing register load-store operations, 32-bit intermediate register, w0 should be used. Update x0 register to w0 register type. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: lsch3: Use SVR based timer base address detectionPriyanka Jain2016-11-22-3/+17
| | | | | | | | | | | | | | | | | | | | | | | | Timer controller base address has been changed from LS2080A SoC (and its personalities) to new SoCs like LS2088A, LS1088A. Use SVR based timer base address detection to avoid compile time #ifdef. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: lsch3: Add generic get_svr() in assemblyPriyanka Jain2016-11-22-3/+14
| | | | | | | | | | Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8/fsl-layerscape: Update CONFIG_LS2080A to CONFIG_FSL_LSCH3Shengzhou Liu2016-11-21-3/+4
| | | | | | | | | | | | | | | | Update CONFIG_LS2080A to CONFIG_FSL_LSCH3 to make those workaround implementing of erratum reusable for more SoCs. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: fsl-layerscape: Add README for deploying QSPI imageYuan Yao2016-11-21-0/+42
| | | | | | | | | | | | Signed-off-by: Yuan Yao <yao.yuan@nxp.com> [YS: Reviese commit subject] Reviewed-by: York Sun <york.sun@nxp.com>
| * fsl: serdes: fix a deadloop issue for P4080Hou Zhiqiang2016-11-21-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | This deadloop is introduced by commit: 71fe222 fsl: serdes: ensure accessing the initialized maps of serdes protocol deadloop detail: cpu_init_r => fsl_serdes_init => p4080_erratum_serdes_a005 => is_serdes_configured => fsl_serdes_init Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * powerpc: mpc512x: Add support for get_svr() for mpc512x devicesSriram Dash2016-11-21-0/+5
| | | | | | | | | | | | | | | | Defines get_svr() for mpc512x devices Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: ls2080a: Update serdes protocol supportPriyanka Jain2016-11-21-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | Add these serdes protocols Serdes1: 0x39, 0x4B, 0x4C, 0x4D Serdes2: 0x47, 0x57 Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> [YS: Revise commit message] Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: ls1046aqds: add lpuart supportShaohui Xie2016-11-21-0/+75
| | | | | | | | | | | | | | LPUART0 is used by default, and it's using platform clock. Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv7: Add support of ls1021a-iot boardFeng Li2016-11-21-1/+136
| | | | | | | | | | | | | | | | The patch adds support for Freescale ls1021a-iot board. Signed-off-by: Feng Li <feng.li_2@nxp.com> [YS: rewrite commit message, fix whitespace in Kconfig] Reviewed-by: York Sun <york.sun@nxp.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini2016-11-22-0/+4
|\ \
| * | spi: kirkwood_spi: implement mvebu_spi_set_mode()Chris Packham2016-11-18-0/+4
| |/ | | | | | | | | | | | | | | | | Set the appropriate bits in the interface config register based on the SPI_ mode flags. Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Jagan Teki <jteki@openedev.com> Signed-off-by: Chris Packham <judge.packham@gmail.com>
* | arm: add save_boot_params for ARM1176Cédric Schieli2016-11-21-0/+10
| | | | | | | | | | | | | | | | | | | | Implement a hook to allow boards to save boot-time CPU state for later use. When U-Boot is chain-loaded by another bootloader, CPU registers may contain useful information such as system configuration information. This feature mirrors the equivalent ARMv7 feature. Signed-off-by: Cédric Schieli <cschieli@gmail.com> Acked-by: Stephen Warren <swarren@nvidia.com>
* | TI: Remove CONFIG_OMAP_COMMON in favor of CONFIG_ARCH_OMAP2Tom Rini2016-11-21-3/+3
| | | | | | | | | | | | | | | | With the move to arch/arm/mach-omap2 there are now very few uses of CONFIG_OMAP_COMMON and further they can all be replaced with CONFIG_ARCH_OMAP2, so do so. Signed-off-by: Tom Rini <trini@konsulko.com>
* | arm: Introduce arch/arm/mach-omap2 for OMAP2 derivative platformsTom Rini2016-11-21-72/+25
| | | | | | | | | | | | | | | | | | | | | | This moves what was in arch/arm/cpu/armv7/omap-common in to arch/arm/mach-omap2 and moves arch/arm/cpu/armv7/{am33xx,omap3,omap4,omap5} in to arch/arm/mach-omap2 as subdirectories. All refernces to the former locations are updated to the current locations. For the logic to decide what our outputs are, consolidate the tests into a single config.mk rather than including 4. Signed-off-by: Tom Rini <trini@konsulko.com>
* | arm: Introduce ARCH_OMAP2Tom Rini2016-11-21-30/+20
| | | | | | | | | | | | | | | | To start consolidating various TI-related code, introduce the ARCH_OMAP2 symbol. While we have removed omap2-specific boards some time ago, matching up with the kernel naming here will help overall. Signed-off-by: Tom Rini <trini@konsulko.com>
* | board: ti: amx3xx: Remove multiple EEPROM readsLokesh Vutla2016-11-21-0/+4
| | | | | | | | | | | | | | Detect the board very early and avoid reading eeprom multiple times. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | ARM: AMx3xx: Centralize early clock initializationLokesh Vutla2016-11-21-3/+20
| | | | | | | | | | | | | | | | | | | | | | | | This is similar to Commit 93e6253d11030 ("ARM: OMAP4/5: Centralize early clock initialization") that was done for OMAP4+, reflecting the same for AM33xx and AM43xx SoCs to centralize clock initialization. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> [trini: Add setup_early_clocks that calls setup_clocks_for_console for ti81xx] Signed-off-by: Tom Rini <trini@konsulko.com>
* | ARM: AMx3xx: Allow arch specific code to use early DMLokesh Vutla2016-11-21-6/+20
|/ | | | | | | | | | | | Early system initialization is being done before initf_dm is being called in U-Boot. Then system will fail to boot if any of the DM enabled driver is being called in this system initialization code. So, rearrange the code a bit so that DM enabled drivers can be called during early system initialization. This is inspired by commit e850ed82bce8 ("ARM: OMAP4+: Allow arch specific code to use early DM") Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* Merge tag 'signed-efi-next' of git://github.com/agraf/u-bootTom Rini2016-11-17-30/+687
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | Patch queue for efi - 2016-11-17 Highlights this time around: - x86 efi_loader support - hello world efi test case - network device name is now representative - terminal output reports modes correctly - fix psci reset for ls1043/ls1046 - fix efi_add_runtime_mmio definition for x86 - efi_loader support for ls2080
| * armv8: fsl-layerscape: Add support for efi_loader RTS resetAlexander Graf2016-11-17-2/+31
| | | | | | | | | | | | | | | | | | | | When implementing efi loader support, we can expose runtime services for payloads. One such service is CPU reset. This patch implements RTS CPU reset support for layerscape systems. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: ls2080a: Declare spin tables as reserved for efi loaderAlexander Graf2016-11-17-0/+6
| | | | | | | | | | | | | | | | The efi loader code has its own memory map, so it needs to be aware where the spin tables are located, to ensure that no code writes into those regions. Signed-off-by: Alexander Graf <agraf@suse.de>
| * ls2080: Exit dpaa only right before exiting U-BootAlexander Graf2016-11-17-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On ls2080 we have a separate network fabric component which we need to shut down before we enter Linux (or any other OS). Along with that also comes configuration of the fabric using a description file. Today we always stop and configure the fabric in the boot script and (again) exit it on device tree generation. This works ok for the normal booti case, but with bootefi the payload we're running may still want to access the network. So let's add a new fsl_mc command that defers configuration and stopping the hardware to when we actually exit U-Boot, so that we can still use the fabric from an EFI payload. For existing boot scripts, nothing should change with this patch. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: York Sun <york.sun@nxp.com> [agraf: Fix x86 build]
| * efi_loader: Disable PSCI reset for ls1043 and ls1046Alexander Graf2016-11-17-2/+3
| | | | | | | | | | | | | | The NXP ls1043 and ls1046 systems do not (yet) have PSCI enablement for reset. Don't enable generic PSCI reset code on them. Signed-off-by: Alexander Graf <agraf@suse.de>
| * efi: x86: Adjust EFI files support efi_loaderSimon Glass2016-11-14-4/+21
| | | | | | | | | | | | | | | | | | Add compiler flags and make a few minor adjustments to support the efi loader. Signed-off-by: Simon Glass <sjg@chromium.org> [agraf: Add Kconfig dep] Signed-off-by: Alexander Graf <agraf@suse.de>
| * x86: Move efi .S files into the 'lib' directorySimon Glass2016-11-14-19/+19
| | | | | | | | | | | | | | | | These files now need to be in a standard place so that they can be located by generic Makefile rules. Move them to the 'lib' directory. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Alexander Graf <agraf@suse.de>
| * x86: Move efi .lds files into the 'lib' directorySimon Glass2016-11-14-1/+1
| | | | | | | | | | | | | | | | These files now need to be in a standard place so that they can be located by generic Makefile rules. Move them to the 'lib' directory. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Alexander Graf <agraf@suse.de>
generated by cgit v1.1 at 2024-11-06 23:46:29 +0000