summaryrefslogtreecommitdiff
path: root/arch
Commit message (Collapse)AuthorAgeLines
* powerpc/mpc86xx: Fix boot_flag for calling board_init_f()York Sun2014-05-13-0/+1
| | | | | | | The argument boot_flag of board_inti_f() hasn't been used for powerpc until recent changing to use generic board. Set it to 0 as a proper value. Signed-off-by: York Sun <yorksun@freescale.com>
* powerpc/mpc85xx: Fix boot_flag for calling board_init_f()York Sun2014-05-13-5/+8
| | | | | | | | | baord_init_f takes one argument, boot_flag. It has not been used for powerpc, until recently changing to use generic board architecture. The boot flag is added as a return value from cpu_init_f(). Signed-off-by: York Sun <yorksun@freescale.com> CC: Alexander Graf <agraf@suse.de>
* powerpc/mpc85xx: Ignore FDT pointer for non-QEMU in cpu_init_early_f()York Sun2014-05-13-0/+2
| | | | | | | | | The pointer of device tree comes from r3 for QEMU. This is not the case for normal SoCs out of reset. Having gd->fdt_blob as 0 is important for other functions to detect the non-existence of device tree. Signed-off-by: York Sun <yorksun@freescale.com> CC: Alexander Graf <agraf@suse.de>
* powerpc/mpc85xx: Update TLB CAMs in relocated modeAlexander Graf2014-05-13-0/+1
| | | | | | | | We want to use the TLB mapping helpers in relocated mode as well. These helpers need to have awareness of already occupied TLB entries. We already had them in sync in non-relocated mode, but need to resync them when we move into relocated. Signed-off-by: Alexander Graf <agraf@suse.de>
* PPC 85xx QEMU: Don't use HID1Alexander Graf2014-05-13-1/+1
| | | | | | | | | | For the QEMU machine type, we can plug in either e500v2, e500mc, e5500 or e6500 style cores into the system. U-boot has to work with all of them. So avoid using HID1 which is not available on e500mc systems to make sure we don't trap on it. Signed-off-by: Alexander Graf <agraf@suse.de>
* PPC 85xx QEMU: Always assume 1 coreAlexander Graf2014-05-13-2/+2
| | | | | | | | | | | | | | | We only need u-boot to bother about a single core in the QEMU machine. Everything that would require additional knowledge of more cores gets handled by QEMU and passed straight into the payload we execute. Because of this setup, it would be counterproductive to enable SMP support in u-boot. We would have to rip CPUs out of already existing spin tables and respin them from u-boot. It would be a pretty big mess. So only assume we have a single core. This fixes errors about CONFIG_MP being disabled. Signed-off-by: Alexander Graf <agraf@suse.de>
* powerpc/85xx: add T4080 SoC supportShengzhou Liu2014-05-13-10/+56
| | | | | | | | The T4080 SoC is a low-power version of the T4160. T4080 combines 4 dual-threaded Power Architecture e6500 cores with single cluster and two memory complexes. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
* powerpc/t208x: enable errata A006261, A006593, A006379Shengzhou Liu2014-05-13-0/+6
| | | | | | | Enable errata A006261, A006593, A006379 for T208x. Additionally enable CONFIG_CMD_ERRATA for T2080RDB. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
* powerpc/mpc85xx: SECURE BOOT- Add secure boot target for T2080RDBAneesh Bansal2014-05-13-0/+1
| | | | | | | | | | | Secure Boot Target is added for T2080RDB Changes: For Secure boot, CPC is configured as SRAM and used as house keeping area which needs to be disabled. So CONFIG_SYS_CPC_REINIT_F is defined for CONFIG_T2080RDB. Signed-off-by: Aneesh Bansal <aneesh.bansal@freescale.com>
* powerpc/mpc85xx: SECURE BOOT- secure boot target for t1040rdbAneesh Bansal2014-05-13-1/+1
| | | | | | | | T1040RDB.h file is removed and a unified file T104xRDB.h is created. Hence macro CONFIG_T1040 is renamed to CONFIG_T104x. Signed-off-by: Gaurav Kumar Rana <gaurav.rana@freescale.com> Signed-off-by: Aneesh Bansal <aneesh.bansal@freescale.com>
* powerpc/85xx: Add T4240RDB board supportChunhe Lan2014-05-13-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | T4240RDB board Specification ---------------------------- Memory subsystem: 6GB DDR3 128MB NOR flash 2GB NAND flash Ethernet: Eight 1G SGMII ports Four 10Gbps SFP+ ports PCIe: Two PCIe slots USB: Two USB2.0 Type A ports SDHC: One SD-card port SATA: One SATA port UART: Dual RJ45 ports Signed-off-by: Chunhe Lan <Chunhe.Lan@freescale.com> [York Sun: fix CONFIG_SYS_QE_FMAN_FW_ADDR in T4240RDB.h]
* common/board_f: Initialized global data for generic boardYork Sun2014-05-12-0/+7
| | | | | | | | | | | | | Some platforms (tested on mpc85xx, mpc86xx) use global data before calling function baord_inti_f(). The data should not be cleared later. Any arch which uses global data in generic board board_init_f() should define CONFIG_SYS_GENERIC_GLOBAL_DATA. Signed-off-by: York Sun <yorksun@freescale.com> CC: Scott Wood <scottwood@freescale.com> CC: Simon Glass <sjg@chromium.org> CC: Albert ARIBAUD <albert.u.boot@aribaud.net> Acked-by: Simon Glass <sjg@chromium.org>
* cosmetic: delete misleading comment /* CONFIG_BOARDDIR */Masahiro Yamada2014-05-12-4/+4
| | | | | | | CONFIG_BOARDDIR is not referenced in these linker scripts. The comment /* CONFIG_BOARDDIR */ is misleading. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* blackfin: replace bfin_gen_rand_mac() with eth_random_addr()Masahiro Yamada2014-05-12-28/+0
| | | | | | | | | | | bfin_gen_rand_mac() uses __DATE__ as the seed for random ethernet address. This makes the build non-deterministic. In the first place, it should not be implemented as a Bfin-specific function. Use eth_random_addr() instead. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Sonic Zhang <sonic.zhang@analog.com>
* bd_info: remove bi_barudrate member from struct bd_infoMasahiro Yamada2014-05-12-26/+1
| | | | | | | | | | | | | | | | | gd->bd->bi_baudrate is a copy of gd->baudrate. Since baudrate is a common feature for all architectures, keep gd->baudrate only. It is true that bi_baudrate was passed to the kernel in that structure but it was a long time ago. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Tom Rini <trini@ti.com> Cc: Simon Glass <sjg@chromium.org> Cc: Wolfgang Denk <wd@denx.de> Cc: Heiko Schocher <hs@denx.de> Acked-by: Michal Simek <monstr@monstr.eu> (For microblaze)
* Merge branch 'tom' of git://git.denx.de/u-boot-x86Tom Rini2014-05-09-1/+91
|\
| * sandbox: ignore sandbox.dtbMasahiro Yamada2014-05-09-0/+1
| | | | | | | | | | | | Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
| * sandbox: move source files from board/ to arch/sandbox/Masahiro Yamada2014-05-09-1/+84
| | | | | | | | | | | | | | | | | | | | | | | | Prior to commit 33a02da0, all boards must have board/${BOARD}/ or board/${VENDOR}/${BOARD}/ directory. Now this rule is obsolete. It looks weird that sandbox defines "vendor" and "board" just for meeting the old U-Boot directory structure. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Simon Glass <sjg@chromium.org>
| * sandbox: Provide a build option to avoid using SDLSimon Glass2014-05-09-0/+6
| | | | | | | | | | | | | | | | | | | | | | Some machines do not have SDL libraries installed, and it is still useful to build sandbox without LCD/keyboard support. Add an option for this, used as follows: make sandbox_config all NO_SDL=1 Signed-off-by: Simon Glass <sjg@chromium.org>
* | Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2014-05-09-5429/+6132
|\ \ | |/ |/|
| * Merge branch 'u-boot/master'Albert ARIBAUD2014-05-09-4508/+765
| |\ | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/Makefile (trivial merge)
| * \ Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'Albert ARIBAUD2014-04-21-255/+3050
| |\ \
| | * | arm, da850: staticize funtionsManish Badarkhe2014-04-17-6/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Make funtions static which are locally used in file and remove the declaration from header file. Signed-off-by: Manish Badarkhe <badarkhe.manish@gmail.com>
| | * | am335x: Switch to CONFIG_SKIP_LOWLEVEL_INIT from guarding SPL or NOR_BOOTTom Rini2014-04-17-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the case of SPL or NOR_BOOT (no SPL involved) we need to include certain code in the build. Use !CONFIG_SKIP_LOWLEVEL_INIT rather than CONFIG_SPL_BUILD || CONFIG_NOR_BOOT to make the code clearer, and to make supporting XIP QSPI boot clearer in the code. Signed-off-by: Tom Rini <trini@ti.com> Reviewed-by: Wolfgang Denk <wd@denx.de>
| | * | keystone2: net: add keystone ethernet driverKaricheri, Muralidharan2014-04-17-0/+240
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Ethernet driver configures the CPSW, SGMI and Phy and uses the the Navigator APIs. The driver supports 4 Ethernet ports and can work with only one port at a time. Port configurations are defined in board.c. Signed-off-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: WingMan Kwok <w-kwok2@ti.com>
| | * | keystone2: add keystone multicore navigator driverVitaly Andrianov2014-04-17-0/+570
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Multicore navigator consists of Network Coprocessor (NetCP) and Queue Manager sub system. More details on the hardware can be obtained from the following links:- Network Coprocessor: http://www.ti.com/lit/pdf/sprugz6 Multicore Navigator: http://www.ti.com/lit/pdf/sprugr9 Multicore navigator driver implements APIs to configure the Queue Manager and NetCP Pkt DMA. Signed-off-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: WingMan Kwok <w-kwok2@ti.com> Acked-by: Tom Rini <trini@ti.com>
| | * | k2hk: add support for k2hk SOC and EVMVitaly Andrianov2014-04-17-0/+1912
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | k2hk EVM is based on Texas Instruments Keystone2 Hawking/Kepler SoC. Keystone2 SoC has ARM v7 Cortex-A15 MPCore processor. Please refer the ti/k2hk_evm/README for details on the board, build and other information. This patch add support for keystone architecture and k2hk evm. Signed-off-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: WingMan Kwok <w-kwok2@ti.com> Signed-off-by: Sandeep Nair <sandeep_n@ti.com>
| | * | i2c, davinci: convert driver to new mutlibus/mutliadapter frameworkVitaly Andrianov2014-04-17-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - add davinci driver to new multibus/multiadpater support - adapted all config files, which uses this driver Signed-off-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Acked-by: Heiko Schocher <hs@denx.de>
| | * | i2c, davinci: move i2c_defs.h to the drivers/i2c directoryKaricheri, Muralidharan2014-04-17-68/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch moves the davinci i2c_defs.h file to drivers.i2c directory. It will allow to reuse the davinci_i2c driver for TI Keystone2 SOCs. Not used "git mv" command to move the file because small part of it with definitions specific for Davinci SOCs has to remain in the arch/arm/include/asm/arch-davinci. Signed-off-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Acked-by: Tom Rini <trini@ti.com>
| | * | arm: add support for arch timerVitaly Andrianov2014-04-17-0/+59
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch add basic support for the architecture timer found on recent ARMv7 based SoCs. Signed-off-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
| | * | dra7xx_evm: Add QSPI_4 support, qspiboot build targetTom Rini2014-04-17-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We previously only supported QSPI_1 (single) support. Add QSPI_4 (quad) read support as well. This means we can be given one of two boot device values, but don't care which it is, so perform a fixup on the QSPI_4 value. We add a qspiboot build target to better show how you would use QSPI as a boot device in deployment. When we boot from QSPI, we can check the environment for 'boot_os' to control Falcon Mode. Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Tom Rini <trini@ti.com>
| | * | OMAP3: beagle-xm: generate fake USB ethernet MAC address from dieidNishanth Menon2014-04-17-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Similar to OMAP5uEVM, PandaBoard, BeagleBoard-XM has a USB based ethernet without MAC address embedded. So fake a MAC address following the similar strategy used on OMAP5 and PandaBoard family. Signed-off-by: Nishanth Menon <nm@ti.com>
| | * | omap3/sys_info: provide interface to read die idNishanth Menon2014-04-17-5/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | introduce get_die_id() function which allows generation of information such as fake MAC address from the processor ID code. Signed-off-by: Nishanth Menon <nm@ti.com>
| | * | OMAP: common: consolidate fake USB ethernet MAC address creationNishanth Menon2014-04-17-0/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TI platforms such as OMAP5uevm, PandaBoard, use equivalent logic to generate fake USB MAC address from device unique DIE ID. Consolidate this to a generic location such that other TI platforms such as BeagleBoard-XM can also use the same. NOTE: at this point in time, I dont yet see a need for a generic dummy ethernet MAC address creation function, but if there is a need in the future, this can be further abstracted out. Signed-off-by: Nishanth Menon <nm@ti.com>
| | * | ARM: OMAP: replace custom sr32() by standard I/O accessorsWolfgang Denk2014-04-17-163/+205
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace the custom bit manipulation function sr32() by standard I/O accessors. A major motivation for this cleanup was the fact, that a number of calls of that function resulted in 32 bit wide shift operations on u32 data, which according to the C-ISO/IEC-9899-Standard provokes undefined behaviour: 6.5.7 Bitwise shift operators ... If the value of the right operand is negative or is greater than or equal to the width of the promoted left operand, the behavior is undefined. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Tom Rini <trini@ti.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
| | * | ARM: OMAP: hide custom bit manipulation function sr32()Wolfgang Denk2014-04-17-16/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The only remaining user of the custom bit manipulation function sr32() is arch/arm/cpu/armv7/omap3/clock.c, so make it a static function in that file to prepare complete removal. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Tom Rini <trini@ti.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
| | * | ARM: OMAP: remove sr32() from OMAP board codeWolfgang Denk2014-04-17-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace the custom sr32() bit manipulation function in arch/arm/cpu/armv7/omap3/board.c and board/ti/panda/panda.c by standard I/O accessors. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Tom Rini <trini@ti.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
| * | | ARM: tegra: pack pinmux data tables tighterStephen Warren2014-04-17-41/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use smaller fields in the Tegra pinmux structures in order to pack the data tables into a smaller space. This saves around 1-3KB for the SPL and around 3-8KB for the main build of U-Boot, depending on the board, which SoC it uses, and how many pinmux table entries there are. In order to pack PMUX_FUNC_* into a smaller space, don't hard-code the values of PMUX_FUNC_RSVD* to values which require 16 bits to store them, but instead let their values be assigned automatically, so they end up fitting into 8 bits. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | | usb: tegra: combine header fileStefan Agner2014-04-17-753/+225
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Combine the Tegra USB header file into one header file for all SoCs. Use ifdef to account for the difference, especially Tegra20 is quite different from newer SoCs. This avoids duplication, mainly for Tegra30 and newer devices. Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | | usb: tegra: fix PHY configurationStefan Agner2014-04-17-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On Tegra30 and later, the PTS (parallel transceiver select) and STS (serial transceiver select) are part of the HOSTPC1_DEVLC_0 register rather than PORTSC1_0 register. Since the reset configuration usually matches the intended configuration, this error did not show up on Tegra30 devices. Also use the slightly different bit fields of first USB, (USBD) on Tegra20 and move those definitions to the Tegra20 specific header file. Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | | ARM: tegra: add Jetson TK1 boardStephen Warren2014-04-17-0/+85
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Jetson TK1 is an NVIDIA Tegra124 reference board, which shares much of its design with Venice2. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | | ARM: tegra: Tegra124 pinmux cleanupStephen Warren2014-04-17-577/+539
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This renames all the pinmux pins, drive groups, and functions so they have a prefix which matches the type name. These lists are also auto- generated using scripts that were also used to generate the kernel pinctrl drivers. This ensures that the lists are consistent between the two. The entries in tegra124_pingroups[] are all updated to remove the columns which are no longer used. All affected code is updated to match. There are differences in the set of drive groups. I have validated this against the TRM. There are differences order of pin definitions in pinmux.c; these previously had significant mismatches with the correct order:-( I adjusted a few entries in pinmux-config-venice2.h since the set of legal functions for some pins was updated to match the TRM. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | | ARM: tegra: Tegra114 pinmux cleanupStephen Warren2014-04-17-573/+500
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This renames all the pinmux pins, drive groups, and functions so they have a prefix which matches the type name. These lists are also auto- generated using scripts that were also used to generate the kernel pinctrl drivers. This ensures that the lists are consistent between the two. The entries in tegra114_pingroups[] are all updated to remove the columns which are no longer used. All affected code is updated to match. This introduces a few changes to pin/group/function naming and the set of available functions for each pin. The new values now exactly match the TRM; the chip documentation. I adjusted a few entries in pinmux-config-dalmore.h due to this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | | ARM: tegra: Tegra30 pinmux cleanupStephen Warren2014-04-17-678/+609
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This renames all the pinmux pins, drive groups, and functions so they have a prefix which matches the type name. These lists are also auto- generated using scripts that were also used to generate the kernel pinctrl drivers. This ensures that the lists are consistent between the two. The entries in tegra30_pingroups[] are all updated to remove the columns which are no longer used. All affected code is updated to match. This introduces a few changes to pin/group/function naming and the set of available functions for each pin. The new values now exactly match the TRM; the chip documentation. I adjusted one entry in pinmux-config-cardhu.h due to this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | | ARM: tegra: Tegra20 pinmux cleanupStephen Warren2014-04-17-374/+359
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This renames all the Tegra20 pinmux pins and functions so they have a prefix which matches the type name. The entries in tegra20_pingroups[] are all updated to remove the columns which are no longer used. All affected code is updated to match. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | | ARM: tegra: pinmux naming consistency fixesStephen Warren2014-04-17-127/+131
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Clean up the naming of pinmux-related objects: * Refer to drive groups rather than pad groups to match the Linux kernel. * Ensure all pinmux API types are prefixed with pmux_, values (defines) are prefixed with PMUX_, and functions prefixed with pinmux_. * Modify a few type names to make their content clearer. * Minimal changes to SoC-specific .h/.c files are made so the code still compiles. A separate per-SoC change will be made immediately following, in order to keep individual patch size down. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | | ARM: tegra: reduce public pinmux APIStephen Warren2014-04-17-8/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove a few unused functions from the pinmux header. They aren't currently used, and removing them prevents any new usage from appearing. This will ease moving to just pinmux_config_table() and padgrp_config_table() in the future. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | | ARM: tegra: pinctrl: remove duplicationStephen Warren2014-04-17-2072/+732
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Much of arch/arm/cpu/tegra*-common/pinmux.c is identical. Remove the duplication by creating pinmux-common.c for all the identical code. This leaves: * arch/arm/include/asm/arch-tegra*/pinmux.h defining only the names of the various pins/pin groups, drive groups, and mux functions. * arch/arm/cpu/tegra*-common/pinmux.c containing only the lookup table stating which pin groups support which mux functions. The code in pinmux-common.c is semantically identical to that in the various original pinmux.c, but had some consistency and cleanup fixes applied during migration. I removed the definition of struct pmux_tri_ctlr, since this is different between SoCs (especially Tegra20 vs all others), and it's much simpler to deal with this via the new REG/MUX_REG/... defines. spl.c, warmboot.c, and warmboot_avp.c needed updates due to this, since they previously hijacked this struct to encode the location of some non-pinmux registers. Now, that code simply calculates these register addresses directly using simple and obvious math. I like this method better irrespective of the pinmux code cleanup anyway. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | | ARM: tegra: use apb_misc.h in more placesStephen Warren2014-04-17-8/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tegra's "APB misc" register region contains various miscellaneous registers and the Tegra pinmux registers. Some code that touches the misc registers currently uses struct pmux_tri_ctlr, which is intended to be a definition of pinmux registers, rather than struct apb_misc_pp_ctrl, which is intended to be a definition of the miscellaneous registers. Convert all such code to use struct apb_misc_pp_ctrl, since struct pmux_tri_ctlr goes away in the next patch. This requires adding a missing field definition to struct apb_misc_pp_ctrl, and moving the header into a more common location. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | | ARM: tegra: prototype pinmux_init() in board.hStephen Warren2014-04-17-9/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | pinmux_init() is a board-level function, not a pinmux driver function. Move the prototype to a board header rather than the driver header. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
generated by cgit v1.1 at 2024-11-15 04:03:58 +0000