summaryrefslogtreecommitdiff
path: root/arch
Commit message (Collapse)AuthorAgeLines
...
* | | mpc8640: Update the io_sel fields for PCI ExpressPeter Tyser2010-10-20-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | Previously io_sel=0xe incorrect stated PCIE1 was enabled. Also add support for the mpc8640's PCIE2 interface. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | | 85xx: Add support for not releasing secondary cores via 'mp_holdoff'Aaron Sierra2010-10-20-3/+51
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some OSes require that secondary cores not be initialized when they are booted (eg VxWorks). By default when U-Boot is compiled with the CONFIG_MP option all secondary cores are brought out of reset and held in spinloops. Setting the "mp_holdoff" environment variable to 'yes' or '1' will cause U-Boot to leave secondary cores in their default state. Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | | Disable unused chip-select for DDR controller interleavingYork Sun2010-10-20-3/+14
| | | | | | | | | | | | | | | | | | | | | | | | When DDR controller interleaving is eabled and less than all bank (chip-select) interleaving is seletected, the unused chip-select should be disabled. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | | Adding fixed sdram setting for cornet_ds boardYork Sun2010-10-20-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 800, 900, 1000, 1200MT/s data rate parameters are added for fixed sdram setting. SPD based parameters and fixed parameters can be toggled by hwconfig. To use fixed parameters, hwconfig=fsl_ddr:sdram=fixed To use SPD parameters, hwconfig=fsl_ddr:ctlr_intlv=cacheline,bank_intlv=cs0_cs1 Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | | Add memory test feature for mpc85xx POST.York Sun2010-10-20-0/+219
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The memory test is performed after DDR initialization when U-boot stills runs in flash and cache. On recent mpc85xx platforms, the total memory can be more than 2GB. To cover whole memory, it needs be mapped 2GB at a time using a sliding TLB window. After the testing, DDR is remapped with up to 2GB memory from the lowest address as normal. If memory test fails, DDR DIMM SPD and DDR controller registers are dumped for further debugging. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | | Adding more control to physical address mappingYork Sun2010-10-20-6/+10
| | | | | | | | | | | | | | | | | | | | | | | | A worker function setup_ddr_tlbs_phys() is introduced to implement more control on physical address mapping. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | | powerpc/8xxx: Add fdt_fixup_phy_connection helperKumar Gala2010-10-20-0/+26
| | | | | | | | | | | | | | | | | | | | | Add a common helper that will set the PHY connection type based on enum. We use this on eTSEC, UCC, and will with Fman in the future. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | | powerpc/fsl: Introduce common enum for PHY typesKumar Gala2010-10-20-0/+31
|/ / | | | | | | | | | | | | | | Have a common enum for phy types that we use in the UCC driver. We will also use this enum for dealing with phy connection fixup in the device tree. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | MX31: Removed warnings for iomux functionStefano Babic2010-10-20-4/+4
| | | | | | | | | | | | Removed warnings generated in the mx31_set_pad() function. Signed-off-by: Stefano Babic <sbabic@denx.de>
* | Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk2010-10-20-2136/+2716
|\ \
| * | PXA: Fix reloc, Push lowlevel init into C codeMarek Vasut2010-10-19-214/+359
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Firstly, this fixes relocation issues. I had to use part of Dcache as RAM for a while. I also moved around the lowlevel init code. It turned out so most of the lowlevel init code ended in cpu.c (and eventually was rewritten into C). This will also allow easier operation with FDT, multi-CPU-model support etc. in later releases. NOTE: This breaks most of the PXA boards (actually, the reloc stuff did already, this only finishes the doom). Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
| * | PXA: fix MDREFR[APD] bit settingMikhail Kshevetskiy2010-10-19-8/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | pxa_mem_setup macro use r6 to store CONFIG_SYS_MDREFR_VAL during memory initialization. This reg is modified during execution of pxa_wait_ticks. Later we use r6 to setup MDREFR[APD] bit. As result MDREFR[APD] is always zero. Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@gmail.com>
| * | PXA: pxafb: Marvell Littleton LCD definitionMarek Vasut2010-10-19-0/+33
| | | | | | | | | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
| * | PXA: pxafb: Add support for Sharp LQ038J7DH53Marek Vasut2010-10-19-0/+34
| | | | | | | | | | | | | | | | | | This LCD panel is found in Palm LifeDrive handheld Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
| * | PXA: pxafb: Add ACX517AKN supportMarek Vasut2010-10-19-0/+34
| | | | | | | | | | | | | | | | | | ACX517AKN LCD panel is found in Palm Tungsten|C Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
| * | PXA: pxa-regs.h cleanupMarek Vasut2010-10-19-1417/+1561
| | | | | | | | | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
| * | PXA: pxafb: Fix indent problemsMarek Vasut2010-10-19-100/+100
| | | | | | | | | | | | | | | | | | Also change the initializer style Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
| * | Merge branch 'at91' of git://git.denx.de/u-boot-atmelWolfgang Denk2010-10-19-71/+84
| |\ \
| | * | AT91 clock/timer: move static data to global_data structReinhard Meyer2010-10-19-71/+83
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | clock.c / timer.c used static data and are called before relocation. Move all static variables into global_data structure. Also cleanup timer.c from unused stubs and make it truly use 64 bit tick values. Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
| | * | at91rm9200: enable USB supportAndreas Bießmann2010-10-19-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes arch-at91/hardware.h to have the relevant defines for at91rm9200 devices to support existing at91 usb driver. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
| * | | Merge branch 'elf_reloc'Wolfgang Denk2010-10-19-239/+312
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: arch/arm/include/asm/config.h board/LaCie/edminiv2/config.mk board/karo/tx25/config.mk board/logicpd/imx27lite/config.mk doc/README.arm-relocation Signed-off-by: Wolfgang Denk <wd@denx.de>
| | * | | arm1136, qong: add support for ELF relocationsHeiko Schocher2010-10-13-78/+108
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Heiko Schocher <hs@denx.de> cc: Albert ARIBAUD <albert.aribaud@free.fr>
| | * | | armv7, beagle: add support for ELF relocationsHeiko Schocher2010-10-13-54/+86
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Heiko Schocher <hs@denx.de>
| | * | | arm926ejs, tx25: add support for ELF relocationsHeiko Schocher2010-10-13-4/+6
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Heiko Schocher <hs@denx.de>
| | * | | arm: implement ELF relocationsAlbert Aribaud2010-10-13-108/+116
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ELF relocation tables generated with linker option -pie can be used to fixup code and data in a single loop at relocation, removing the need for manual fixups anywhere else in the code. Signed-off-by: Albert Aribaud <albert.aribaud@free.fr>
| * | | | Merge branch 'master' of git://git.denx.de/u-boot-imxWolfgang Denk2010-10-19-58/+50
| |\ \ \ \ | | |_|_|/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: board/logicpd/imx31_litekit/config.mk boards.cfg Signed-off-by: Wolfgang Denk <wd@denx.de>
| | * | | MX5: Remove dead code with ENABLE_IMPRECISE_ABORTJason Liu2010-10-19-14/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This code section is dead due to we never define ENABLE_IMPRECISE_ABORT for MX5 Signed-off-by: Jason Liu <r64343@freescale.com>
| | * | | MX5: rename mx51 to mx5Jason Liu2010-10-18-44/+50
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rename mx51 to mx5 in order to support more mx51 like-style SOCs such as MX53 and the followings. Signed-off-by: Jason Liu <r64343@freescale.com>
| * | | | ARM: add flat device tree supportJohn Rigby2010-10-18-16/+123
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on other architectures already supported. Tested on OMAP3 Beagle board and another unnamed ARM platform. Signed-off-by: John Rigby <john.rigby@linaro.org> Tested-by: Rob Herring <rob.herring@smooth-stone.com> Acked-by: Wolfgang Denk <wd@denx.de>
| * | | | boot: change some arch ifdefs to feature ifdefsJohn Rigby2010-10-18-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The routines boot_ramdisk_high, boot_get_cmdline and boot_get_kbd are currently enabled by various combinations of CONFIG_M68K, CONFIG_POWERPC and CONFIG_SPARC. Use CONFIG_SYS_BOOT_<FEATURE> defines instead. CONFIG_SYS_BOOT_RAMDISK_HIGH CONFIG_SYS_BOOT_GET_CMDLINE CONFIG_SYS_BOOT_GET_KBD Define these as appropriate in arch/include/asm/config.h files. Signed-off-by: John Rigby <john.rigby@linaro.org> Acked-by: Wolfgang Denk <wd@denx.de>
| * | | | FDT: only call boot_get_fdt from generic codeJohn Rigby2010-10-18-14/+8
| | |_|/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All arches except nios2 and microblaze call boot_get_fdt from bootm_start in common/cmd_bootm.c. Having nios2 and microblaze do so as well removes code from their respective do_bootm_linux routines and allows removal of a nasty ifdef from bootm_start. In the case where boot_get_fdt returns an error bootm_start returns and the platform specific do_bootm_linux routines will never get called. Also only check argv[3] for an fdt addr if argc > 3 first. This is already the case for nios2. Signed-off-by: John Rigby <john.rigby@linaro.org> CC: Scott McNutt <smcnutt@psyent.com> CC: Michal Simek <monstr@monstr.eu> CC: Thomas Chou <thomas@wytron.com.tw> Acked-by: Wolfgang Denk <wd@denx.de> Acked-by: Michal Simek <monstr@monstr.eu> Tested-by: Thomas Chou <thomas@wytron.com.tw>
* | | | board_init_r: Removed unused cmdtp variableRichard Retanubun2010-10-19-3/+0
|/ / / | | | | | | | | | | | | Follow up to commit 620f1f6a64095ed558e68d37f1965d015cd49b02 removed compiler warning for (now) unused cmd_tbl_t* cmdtp
* | | powerpc: do not fixup NULL ptrsJoakim Tjernlund2010-10-18-12/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The fixup routine must not fixup NULL pointers. Problem can be seen by char *testfun(void) __attribute__((weak)); char *(*myfun)(void) = testfun; Then add printf("myfun:%p, &myfun:%p\n", myfun, &myfun); before relocation and after relocation. myfun should be NULL in both cases but it is not. Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
* | | powerpc: Cleanup BOOTFLAG_* referencesPeter Tyser2010-10-18-3/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that warm booting is not supported, there isn't a need for the BOOTFLAG_COLD and BOOTFLAG_WARM defines, so remove them. Note that this change makes the board info bd_bootflags field useless. It will always be set to 0, but we leave it around so that we don't break the board info structure that some OSes are expecting to be passed from U-Boot. Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
* | | MPC5121: Add USB EHCI supportDamien Dusha2010-10-18-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Francesco Rendine <francesco.rendine@valueteam.com> Signed-off-by: Damien Dusha <d.dusha@gmail.com> Signed-off-by: Anatolij Gustschin <agust@denx.de> Coding style cleanup; slight file restructuring. Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Remy Bohmer <linux@bohmer.net>
* | | Rename TEXT_BASE into CONFIG_SYS_TEXT_BASEWolfgang Denk2010-10-18-75/+77
|/ / | | | | | | | | | | | | | | | | | | | | | | The change is currently needed to be able to remove the board configuration scripting from the top level Makefile and replace it by a simple, table driven script. Moving this configuration setting into the "CONFIG_*" name space is also desirable because it is needed if we ever should move forward to a Kconfig driven configuration system. Signed-off-by: Wolfgang Denk <wd@denx.de>
* | Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk2010-10-17-6/+502
|\ \
| * | OMAP3: SDRC: Introduce Numonyx DDR typeEnric Balletbo i Serra2010-10-17-0/+43
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Introduce Numonyx DDR timings and provide CONFIG_OMAP3_NUMONYX_DDR config options to allow for platform files to setup their timings. Signed-off-by: Enric Balletbo i Serra <eballetbo@gmail.com> Acked-by: Steve Sakoman <steve.sakoman@linaro.org> Tested-by: Steve Sakoman <steve.sakoman@linaro.org> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
| * | ARMV7: OMAP4: Implement relocation for Panda and OMAP4430SDPSteve Sakoman2010-10-17-0/+5
| | | | | | | | | | | | | | | | | | | | | This patch fixes the build breakage introduced by the recent relocation changes for ARMV7 Signed-off-by: Steve Sakoman <steve@sakoman.com>
| * | ARMV7: OMAP3: Fix bug in get_sdr_cs_offset()Steve Sakoman2010-10-17-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes a typo in the routine to calculate the cs offset based upon the contents of the SDRC cs_cfg register. This function mistakenly shifts the CS1STARTLOW field 17 bits right instead of 17 bits left. This hasn't been an issue to date because all OMAP3 boards currently are configured to have zeros in this field. Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Steve Sakoman <steve.sakoman@linaro.org>
| * | ARMV7: OMAP: Add new mmc driver compatible with CONFIG_GENERIC_MMCSukumar Ghorai2010-10-17-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | OMAP boards currently use a legacy mmc driver. This patch adds a new mmc driver which will work with the generic mmc driver in u-boot. This new driver will work with both OMAP3 and OMAP4 boards. This patch does not remove the old driver. It should remain in the tree until all boards that use it switch to the new driver. Signed-off-by: Sukumar Ghorai <s-ghorai@ti.com> Tested-by: Steve Sakoman <steve@sakoman.com>
| * | Merge branch 'master' of git://git.denx.de/u-boot-imxWolfgang Denk2010-10-17-0/+428
| |\ \
| | * | MX31: add support for setting pin padsStefano Babic2010-10-13-0/+421
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch adds a utility function and defines to set the pad as it is done in linux. Signed-off-by: Stefano Babic <sbabic@denx.de>
| | * | MX31: Adding missing iomux pin to MX.31 registersStefano Babic2010-10-13-0/+7
| | | | | | | | | | | | | | | | Signed-off-by: Stefano Babic <sbabic@denx.de>
| * | | env_mmc: Fix crashing bug encountered after enabling ARM relocationSteve Sakoman2010-10-13-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The crash was occuring in env_relocate because it was being called prior to mmc_initialize. This patch moves the MMC initialization earlier in the init process. This patch also cleans up the env_relocate_spec code in env_mmc.c Signed-off-by: Steve Sakoman <steve.sakoman@linaro.org> Acked-by: Stefano Babic <sbabic@denx.de>
* | | | Blackfin: workaround anomaly 05000440Mike Frysinger2010-10-14-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | We cannot rely on the syscontrol rom func to program PLL_DIV with anomaly 05000440 is in effect, so manually program the MMR when necessary. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* | | | Blackfin: update anomaly lists to latest sheetsMike Frysinger2010-10-14-10/+35
| | | | | | | | | | | | | | | | Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* | | | ppc: Conditionally compile bat_rw.cPeter Tyser2010-10-13-1/+1
|/ / / | | | | | | | | | | | | | | | | | | Only a few PPC boards actually use the common BAT manipulation functions, so only compile it for them. Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
* | | Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk2010-10-13-383/+493
|\ \ \ | | |/ | |/|
| * | ARMV7: Versatile Express Coretile CortexA9x4 supportMatt Waddel2010-10-13-0/+175
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adds support for the ARM quad-core Cortex-A9 processor This system includes a motherboard(Versatile Express), daughterboard (Coretile), and SOC(Cortex-A9 quad core). The serial port, ethernet, and flash systems work with these additions. The naming convention is: SOC -> CortexA9 quad core = ca9x4 daughterboard -> Coretile = ct motherboard -> Versatile Express = vxp This gives ca9x4_ct_vxp.c as the board support file. Signed-off-by: Matt Waddel <matt.waddel@linaro.org>
generated by cgit v1.1 at 2024-11-10 03:35:44 +0000