summaryrefslogtreecommitdiff
path: root/arch
Commit message (Collapse)AuthorAgeLines
...
* MLK-10035-2: supports NAND chips with oob size up to 744 byteAllen Xu2015-04-29-1/+3
| | | | | | | | | | | | | | | | | | Update the u-boot code to support NAND chips with oob size up to 744 byte. For the NAND flash MT29F32G08CBADA, which consists of 2 planes x 1064 blocks per plane. Obviously the block number is not power-of-2. But all MTD driver assumes the page per block and block per plane must be a power of 2 number. So the last 40 blocks in each plane must be truncated. Signed-off-by: Allen Xu <b45815@freescale.com> (cherry picked from commit 9045626dbc7798cc340f64699bc9bd35c537498a) Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Conflicts: include/linux/mtd/nand.h
* MLK-10774-6 imx: add mxc_keybPeng Fan2015-04-29-0/+40
| | | | | | | | | | | | This patch is from commit b79371410aa44972dea53d5c19d256170928dcbd "ENGR00315499-9: ARM:iMX6SL EVK: Add keyboard support" Since board file already added related bsp and pin settings, this patch only add driver. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Signed-off-by: Nitin Garg <nitin.garg@freescale.com> Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* MLK-10774-5 Add EPDC splash screen for MX 6DL SabreSD and 6SL EVKPeng Fan2015-04-29-1/+49
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add EPDC splash screen feature for MX6SL EVK, and MX6DL SABRESD board. - Currently, splash screen consists of a simple black border around a white screen. Done this way to save in memory footprint. - EPDC splash screen is disabled by default in the config file for MX6DL_SABRESD and MX6SL_EVK. If left enabled, the U-Boot image will not boot correctly (hang), since some additional content on the boot device (waveform file) is required for EPDC splash to work correctly. Please refer to Linux Reference Manual for how to flash WAVEFORM file. Signed-off-by: Robby Cai <R63905@freescale.com> Signed-off-by: Nitin Garg <nitin.garg@freescale.com> (cherry picked from commit b8ab9b3eabb94bbbc1eea63e7c0e2a87d2d645f4) Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Conflicts: arch/arm/include/asm/arch-mx6/mx6sl_pins.h board/freescale/mx6sabresd/mx6sabresd.c board/freescale/mx6slevk/mx6slevk.c drivers/video/Makefile include/configs/mx6sabresd.h include/configs/mx6slevk.h include/lcd.h drivers/video/Makefile
* ENGR00328312 i2c: imx: Optimize the i2c device recovery solutionFugang Duan2015-04-29-2/+25
| | | | | | | | | | | | | | | | | From i2c spec, if device pull down the SDA line that causes i2c bus dead, host can send out 9 clock to let device release SDA. But for some special device like pfuze100, it pull down SDA line and the solution cannot take effort. The patch just add NACK and STOP signal after 8 dummy clock, and pmic can release SDA line after the recovery. Test case catch 375 times of i2c hang, and all are recovered. Signed-off-by: Fugang Duan <B38611@freescale.com> (cherry picked from commit 53118db42d201d36ca9067b4bb0e2702399e100b) Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* ENGR00321435-1 imx-common: cpu: Disable mxsfb when necessaryLiu Ying2015-04-29-0/+4
| | | | | | | | | | The kernel may break the display pipeline at boot stage and introduce various display artifacts, so let's disable mxsfb in uboot when necessary. Signed-off-by: Liu Ying <Ying.Liu@freescale.com> (cherry picked from commit 539b8416299ec1ae3f57f866dd3f016bdfaa6875) Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* ENGR00315894-81 gis: Add gis moduleYe.Li2015-04-29-0/+8
| | | | | | | | | | | | Add gis module, current gis is support vadc input. Add power down function to lcdif driver. Signed-off-by: Sandor Yu <R01008@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit a007b00dd8ef9f773dfdebef0b1deb0990281793) Conflicts: drivers/video/Makefile
* ENGR00315894-70 iMX6SX:Video Update MXS LCDIF driverYe.Li2015-04-29-3/+3
| | | | | | | | | | | | | | Add a new interface "mxs_lcd_panel_setup" to setup fb parameters and specifies the LCDIF controller for multiple controllers of iMX6SX. Pass fb parameters via "videomode" env remains work if the new interface is not called before video initialization. Modify LCDIF clock interface "mxs_set_lcdclk" to support multiple LCDIF controllers on iMX6SX. Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit 054fed6bab5b05a054c7e3cb5362635a40e6ee18) Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* ENGR00315894-58 RDC: Add an iMX platform driver for RDC-SEMAYe.Li2015-04-29-0/+319
| | | | | | | | | | | | | | | | | | | | The RDC driver provides interfaces for setting peripherals and masters at BSP initialization, before using the peripherals driver. Another interfaces for lock/unlock RDC semaphore and permission check. The driver assumes boot CPU which runs u-boot is in Domain 0 (default setting on boot). Users should not set it to other domains. The peripherals ID and masters ID may change on different chip, each should provide definitions of the IDs and be included in "imx-rdc.h". Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit 964b2672bfbec14629f5767e59e73fd3bb185e3a) Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Conflicts: arch/arm/imx-common/Makefile arch/arm/include/asm/arch-mx6/imx-regs.h
* ENGR00315894-55 iMX6SX: add debug monitor supportYe.Li2015-04-29-0/+25
| | | | | | | | | | | | | | | | Debug monitor will print out last failed AXI access info when system reboot is caused by AXI access failure, only works when debug monitor is enabled. Enable this module on i.MX6SX. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit df6ac8531d498021ed379c74fc1847bd2cec7179) Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Conflicts: arch/arm/include/asm/arch-mx6/imx-regs.h
* ENGR00331269 arm: mx6: select OSC as uart's clk parentAnson Huang2015-04-29-0/+9
| | | | | | | | | | As M4 is sourcing UART clk from OSC, to make UART work when M4 is enabled, need to select OSC as clk parent, 24M OSC is enough for debug UART in uboot. Signed-off-by: Anson Huang <b20788@freescale.com> (cherry picked from commit 8b903f529370fdc59cc03b3ced954ed894753044) Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* ENGR00322860 iMX6SX: Add function to check M4 status before bootingYe.Li2015-04-29-0/+14
| | | | | | | | | Add new function "arch_auxiliary_core_check_up" to check whether M4 is already up. Therefore, avoid starting M4 again when it is running. Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit 54a0803b29c5ab459bedfb2c68c1e94b89866aa1) Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* ENGR00321299 gis: clean csi0 input mux set bit in GPRSandor Yu2015-04-29-0/+6
| | | | | | | | | | When gis enable in uboot, the CSI0 input mux select setting to vadc module, clean the bit when gis disabled. Signed-off-by: Sandor Yu <R01008@freescale.com> (cherry picked from commit ae66b17b7da3be50dc81ca636b67e8e879f52e26) (cherry picked from commit c83fd326e810c2fff44b8b02e78406d5d04c977c) Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* ENGR00321260-1 iMX6: Add support to get CPU serial numberYe.Li2015-04-29-0/+13
| | | | | | | | | | The android boot needs get_board_serial function to get the CPU uid as the serial number. Implement this function to read the uid from fuse for all iMX6 platforms. Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit 8d355a9d6f138e1c1cd04dbadb7b5b3e2d692701) Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* ENGR00320350 iMX6SLEVK: Fix build warning of PCIE Phy power downYe.Li2015-04-29-0/+2
| | | | | | | | | | | | | | Since the iMX6SL does not have PCIE module, should not define the function "imx_set_pcie_phy_power_down" for it. Otherwise, get the build warning below: arch/arm/cpu/armv7/mx6/soc.c:446:13: warning: 'imx_set_pcie_phy_power_down' defined but not used [-Wunused-function] static void imx_set_pcie_phy_power_down(void) Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit 987c48c07c9ef62fa3fe55faa6f7369b30637127) Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* ENGR00319965 pcie: mask the imx6sl outRichard Zhu2015-04-29-2/+7
| | | | | | | | | imx6sl doesn't have the pcie module, mask the pcie related codes from imx6sl. Signed-off-by: Richard Zhu <r65037@freescale.com> (cherry picked from commit acaff11da33f8f0cb1521d3c48e64e7ed9a87bec) Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* ENGR00319415 pcie: random link down issue after warm-rstRichard Zhu2015-04-29-0/+18
| | | | | | | | | | | | | | | | | | | There are about 0.02% percentage on some imx6q/dl/solo hw boards, random pcie link down when warm-reset is used. Make sure to clear the ref_ssp_en bit16 of gpr1 before warm-rst, and set ref_ssp_en after the pcie clks are stable to workaround it. rootcause: * gpr regisers wouldn't be reset by warm-rst, while the ref_ssp_en is required to be reset by pcie. (work-around in u-boot) * ref_ssp_en should be set after pcie clks are stable. (work-around in kernel) Signed-off-by: Richard Zhu <r65037@freescale.com> (cherry picked from commit 5cc825b12c6b86a22f1a6a0535b52cf3ee142e77) Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* ENGR00315894-77 mx6 soc: Add vadc power up/down functionYe.Li2015-04-29-0/+59
| | | | | | | | | | | | Add vadc power up/down function. Signed-off-by: Sandor Yu <R01008@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit 96d990ef754a879f6ca9da4adf6e0be3d21cdc51) Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Conflicts: arch/arm/include/asm/arch-mx6/imx-regs.h
* ENGR00315894-76 mx6 clock: Add vadc clock enable functionYe.Li2015-04-29-0/+11
| | | | | | | | | | | | | Add vadc clock enable function. Signed-off-by: Sandor Yu <R01008@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit 721c7a1448c5b7265b597b83d18f8338a27ea213) Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Conflicts: arch/arm/cpu/armv7/mx6/clock.c arch/arm/include/asm/arch-mx6/clock.h
* ENGR00315894-71 iMX6SX Update registers and clock for displayYe.Li2015-04-29-0/+445
| | | | | | | | | | | | | Add registers and clock functions to enable/set LCDIF clock and LVDS. Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit ef9d769f9ad1b504a1df8b987d269df9944d8e0c) Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Conflicts: arch/arm/include/asm/arch-mx6/clock.h arch/arm/include/asm/arch-mx6/crm_regs.h arch/arm/include/asm/arch-mx6/imx-regs.h
* ENGR00315894-57 iMX6SX: Add M4 boot support at soc levelYe.Li2015-04-29-0/+29
| | | | | | | | | | | Implement the override function "arch_auxiliary_core_up" to boot Cortex-M4 by executing command "bootaux". The parameter "boot_private_data" points to fields where stores the stack address and PC address for M4 to run. Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit 98c15deb3083d5dac7900c58e95f2ac2f422a4d3) Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* MLK-10774-3 iMX6SX/SL: Modify SOC to support two ENETPeng Fan2015-04-29-6/+48
| | | | | | | | | | | | | | | | | | | iMX6SX has different enet system clocks with iMX6SL, and has two ENET controllers. So update clocks and soc APIs accordingly to support this features. 1. Enet RGMII TX clock source may come from external or internal PLL. By default, use the external phy CLK_25M output as TX clock source. When using internal PLL as source, the function enable_fec_anatop_clock must be called to enable clock for each enet controller. 2. Modify the MAC address function "imx_get_mac_from_fuse" to get either ENET MAC address. 3. Add configuration "CONFIG_FEC_MXC_25M_REF_CLK" to enable ENET 25Mhz reference clock. Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com> Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* ENGR00315894-11 i.mx6:shutdown vddpu and pcie phy to save powerYe.Li2015-04-29-0/+31
| | | | | | | | | | | | | shutdown vddpu and pcie phy to save power Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Jason Liu <r64343@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit 580011f86caf137d59a487694f6f7da042164e05) Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Conflicts: arch/arm/cpu/armv7/mx6/soc.c
* MLK-10774-2 HDMI: splash screen function enhancementPeng Fan2015-04-29-1/+11
| | | | | | | | | | | | | | -Change HDMI video mode to VGA. -Add pixel clock fraction part setting in IPU driver, fix video mode timing issue. -Add overflow state clear workaround, fix kernel hang in HDMI driver issue. -Correct IPU clock to 264MHz. Signed-off-by: Sandor Yu <R01008@freescale.com> Signed-off-by: Nitin Garg <nitin.garg@freescale.com> (cherry picked from commit 45d532a0237f5baf2ec95b4364ec5bc94d312689) Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* MLK-10774-1 imx: LDO: add LDO bypassPeng Fan2015-04-29-0/+155
| | | | | | | | | | | | | | | | | | | | | | | | This patch is from two commits: 1. 748eac71fde78aa0c2e8cb3a3bab94bd994c06f5 ENGR00315499-5: Support i.MX6 1.2GHz via LDO bypass Add check for 1.2GHz core speed. If Speed grading fuse is for 1.2GHz, enable LDO bypass and setup PMIC voltages. LDO bypass is dependent on the flatten device tree file. 2. 93d457e4c601ee5266bc30b7dfa5fa1bbfa8500a MLK-9891-1: ARM: imx6: split WDOG_B setting from set_anatop_bypass() function We set WDOG_B in set_anatop_bypass() before, because it is the only case, but now on i.mx6sabreauto board, we didn't use ldo-bypass mode, but have to use WDOG_B to reboot whole board, so split these code to independent function so that board file can call it freely. Board code is not included, board ldo bypass code will be in bsp update code. Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* break build if it would produce broken binaryPavel Machek2015-04-13-0/+4
| | | | | | | Add an error in known-bad case so that we don't produce broken and hard to debug binaries. Signed-off-by: Pavel Machek <pavel@denx.de>
* Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2015-04-13-0/+33
|\
| * ARM: mx5: add support for USB armory boardAndrej Rosano2015-04-09-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for Inverse Path USB armory board, an open source flash-drive sized computer based on Freescale i.MX53 SoC. http://inversepath.com/usbarmory Signed-off-by: Andrej Rosano <andrej@inversepath.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Chris Kuethe <chris.kuethe@gmail.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: Vagrant Cascadian <vagrant@debian.org> Tested-By: Vagrant Cascadian <vagrant@debian.org> Tested-by: Chris Kuethe <chris.kuethe@gmail.com>
| * ARM: mx5: move to a standard arch/board approachAndrej Rosano2015-04-09-0/+22
| | | | | | | | | | | | | | | | | | | | Move the MX5 based boards to arch/arm/cpu/armv7/mx5, following the commit: 89ebc82137bebb11a8191f8b9cbf08f2533ae8bc Signed-off-by: Andrej Rosano <andrej@inversepath.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Vagrant Cascadian <vagrant@debian.org> Tested-by: Chris Kuethe <chris.kuethe@gmail.com>
* | ARM: rpi: add a couple more revision IDsStephen Warren2015-04-13-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | According to Gordon Henderson's WiringPi library, there are some more Pi revision IDs out there. Add support for them. http://git.drogon.net/?p=wiringPi;a=blob_plain;f=wiringPi/wiringPi.c;hb=5edd177112c99416f68ba3e8c6c4db6ed942e796 At least ID 0x13 is out in the wild: Reported-by: Chee-Yang Chau <cychau@gmail.com> Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
* | ARM: fix arch/arm/Makefile for TegraMasahiro Yamada2015-04-11-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 79d75d752717 (ARM: move -march=* and -mtune= options to arch/arm/Makefile), all the Tegra boards are broken because the SPL is built for ARMv7. Insert Tegra-specific code to arch/arm/Makefile to set compiler flags for an earlier ARM architecture. Note: The v1 patch for commit 79d75d752717 *was* correct when it was submitted. Notice it was originally written for multi .config configuration where Kconfig set CONFIG_CPU_V7/CONFIG_CPU_ARM720T for Tegra U-Boot Main/SPL, respectively. But, until it was merged into the mainline, commit e02ee2548afe (kconfig: switch to single .config configuration) had been already applied there. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reported-by: Stephen Warren <swarren@nvidia.com> Reported-by: Jan Kiszka <jan.kiszka@siemens.com> Tested-by: Jan Kiszka <jan.kiszka@siemens.com>
* | arm: armada-xp: Fix SPL for AXP by using save_boot_params_retStefan Roese2015-04-11-1/+1
| | | | | | | | | | | | | | | | | | | | | | Patch e11c6c27 (arm: Allow lr to be saved by board code) introduced a different method to return from save_boot_params(). The SPL support for AXP has been pulled and changing to this new method is now required for SPL to work correctly. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Luka Perkov <luka.perkov@sartura.hr>
* | Merge git://git.denx.de/u-boot-arcTom Rini2015-04-10-1/+3
|\ \
| * | arc: fix separate compilation of start.oAlexey Brodkin2015-04-10-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While testing "arc: make sure _start is in the beginning of .text section" I haven't done proper clean-up of built binaries and so missed another tiny bit that lead to the following error: --->8--- LD u-boot arc-linux-ld.bfd: cannot find arch/arc/lib/start.o Makefile:1107: recipe for target 'u-boot' failed make: *** [u-boot] Error 1 --->8--- Fix is trivial: put "start.o" in "extra-y". Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
| * | arc: make sure _start is in the beginning of .text sectionAlexey Brodkin2015-04-10-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is important to have entry point in the beginning of .text section because it allows simple loading and execution of U-Boot. For example pre-bootloader loads U-Boot in memory starting from offset 0x81000000 and then just jumps to the same address. Otherwise pre-bootloader would need to find-out where entry-point is. In its turn if it deals with binary image of U-Boot there's no way for pre-bootloader to get required value. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
* | | Merge branch 'master' of git://git.denx.de/u-boot-fdtTom Rini2015-04-10-2/+0
|\ \ \
| * | | fdt: nios: Fix warning in ft_cpu_setup()Simon Glass2015-04-10-2/+0
| |/ / | | | | | | | | | | | | | | | | | | This function should not return a value. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Thomas Chou <thomas@wytron.com.tw>
* | | lpc32xx: add support for board work_92105Albert ARIBAUD \(3ADEV\)2015-04-10-1/+215
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Work_92105 from Work Microwave is an LPC3250- based board with the following features: - 64MB or 128MB SDR DRAM - 1 GB SLC NAND, managed through MLC controller. - Ethernet - Ethernet + PHY SMSC8710 - I2C: - EEPROM (24M01-compatible) - RTC (DS1374-compatible) - Temperature sensor (DS620) - DACs (2 x MAX518) - SPI (through SSP interface) - Port expander MAX6957 - LCD display (HD44780-compatible), controlled through the port expander and DACs This board has SPL support, and uses the LPC32XX boot image format. Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
* | | lpc32xx: add LPC32xx SSP support (SPI mode)Albert ARIBAUD \(3ADEV\)2015-04-10-0/+18
| | | | | | | | | | | | | | | Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
* | | lpc32xx: add GPIO supportAlbert ARIBAUD \(3ADEV\)2015-04-10-0/+48
| | | | | | | | | | | | | | | | | | This driver only supports Driver Model, not legacy model. Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
* | | lpc32xx: i2c: add LPC32xx I2C interface supportAlbert ARIBAUD \(3ADEV\)2015-04-10-0/+18
| | | | | | | | | | | | Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
* | | lpc32xx: mtd: nand: add MLC NAND controllerAlbert ARIBAUD \(3ADEV\)2015-04-10-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The controller's Reed-Solomon ECC hardware is used except of course for raw reads and writes. It covers in- and out-of-band data together. The SPL framework is supported. Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
* | | lpc32xx: add Ethernet supportAlbert ARIBAUD \(3ADEV\)2015-04-10-0/+20
| | | | | | | | | | | | Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
* | | Merge branch 'u-boot/master'Albert ARIBAUD2015-04-10-2737/+2173
|\ \ \ | |/ /
| * | am33xx/ddr.c: Fix regression on DDR2 platformsTom Rini2015-04-07-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Back in fc46bae a "clean up" was introduced that intended to reconcile some of the AM335x codepaths based on how AM43xx operates. Unfortunately this introduced a regression on the DDR2 platforms. This was un-noticed on DDR3 (everything except for Beaglebone White) as we had already populated sdram_config correctly in sequence. This change brings us back to the older behavior and is fine on all platforms. Tested on Beaglebone White, Beaglebone Black and AM335x GP EVM Reported-by: Matt Ranostay <mranostay@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
| * | dts: peach_pi: Add DT properties needed for displayAjay Kumar2015-04-06-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add backlight enable GPIO, and delay needed for panel powerup via FIMD DT node. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | dts: peach_pit: Add SLP and RST GPIO properties in parade DT nodeAjay Kumar2015-04-06-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that parade driver supports reading SLP and RST GPIO from DT, specify the same in parade DT node. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | dts: exynos54xx: Add samsung, pwm-out-gpio property to FIMD nodeAjay Kumar2015-04-06-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that the exynos_fb driver supports handling backlight GPIO via DT, specify pwm output property via FIMD DT node. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | Exynos5: Fix rpll_sdiv to support both peach-pit and peach-pi panelsAjay Kumar2015-04-06-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The existing setting for rpll_sdiv generates 70.5Mhz RPLL video clock to drive 1366x768 panel on peach_pit. This clock rate is not sufficient to drive 1920x1080 panel on peach-pi. So, we adjust rpll_sdiv to 3 so that it generates 141Mhz pixel clock which can drive peach-pi LCD. This change doesn't break peach-pit LCD since 141/2=70.5Mhz, i.e FIMD divider at IP level will get set to 1(the required divider setting will be calculated and set by exynos_fimd_set_clock()) and hence peach-pit LCD still works fine. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | arm: exynos: add display clocks for Exynos5800Ajay Kumar2015-04-06-3/+65
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add get_lcd_clk and set_lcd_clk callbacks for Exynos5800 needed by exynos video driver. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | Exynos: Clock: Fix exynos5_get_periph_rate for I2C.Guillaume GARDET2015-04-06-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 2e82e9252695a612ab0cbf40fa0c7368515f6506 'Exynos: Clock: Cleanup soc_get_periph_rate' introduced a bug in I2C config. This patch makes cros_ec keyboard working again on Samsung Chromebook (snow). Changes in V2: reorder lines as requested by Joonyoung Shim. Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr> Cc: Akshay Saraswat <akshay.s@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Reviewed-by: Simon Glass <sjg@chroimum.org> Tested-by: Simon Glass <sjg@chroimum.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
generated by cgit v1.1 at 2024-11-18 02:11:36 +0000