summaryrefslogtreecommitdiff
path: root/arch
Commit message (Collapse)AuthorAgeLines
* ARM: UniPhier: add Kconfig and defconfigMasahiro Yamada2014-10-05-0/+37
| | | | | | | This commit allows to build Panasonic UniPhier family: PH1-LD4, PH1-Pro4, PH1-sLD8 Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* ARM: UniPhier: add UniPhier SoC support codeMasahiro Yamada2014-10-05-0/+4504
| | | | | | These are used by Panasonic UniPhier SoC family. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriqTom Rini2014-09-26-92/+527
|\
| * board/ls1021aqds: Add DDR4 supportYork Sun2014-09-25-0/+5
| | | | | | | | | | | | | | | | | | | | | | LS1021AQDS has a variant with DDR4 slot. This patch adds a new defconfig for this variant to enable DDR4 support. RAW timing parameters are not added for DDR4. The board timing parameters are only tuned for single- rank 1600 and 1800MT/s with Micron DIMM 9ASF51272AZ-2G1A1 due to DIMM availability. Signed-off-by: York Sun <yorksun@freescale.com> CC: Alison Wang <alison.wang@freescale.com>
| * armv8/fsl-lsch3: Release secondary cores from boot hold off with Boot PageYork Sun2014-09-25-89/+518
| | | | | | | | | | | | | | | | | | | | Secondary cores need to be released from holdoff by boot release registers. With GPP bootrom, they can boot from main memory directly. Individual spin table is used for each core. Spin table and the boot page is reserved in device tree so OS won't overwrite. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Arnab Basu <arnab.basu@freescale.com>
| * ARMv8/ls2085a_emu: Enable DP-DDR as standalone memory blockYork Sun2014-09-25-1/+2
| | | | | | | | | | | | | | DP-DDR is used for DPAA, separated from main memory pool for general use. It has 32-bit bus width and use a standard DDR4 DIMM (64-bit). Signed-off-by: York Sun <yorksun@freescale.com>
| * driver/ddr: Restruct driver to allow standalone memory spaceYork Sun2014-09-25-2/+2
| | | | | | | | | | | | | | | | | | | | U-boot has been initializing DDR for the main memory. The presumption is the memory stays as a big continuous block, either linear or interleaved. This change is to support putting some DDR controllers to separated space without counting into main memory. The standalone memory controller could use different number of DIMM slots. Signed-off-by: York Sun <yorksun@freescale.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxTom Rini2014-09-26-16/+10
|\ \
| * | powerpc: add --bss-plt to LDFLAGSChris Packham2014-09-25-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With some versions of gcc (that we know of 4.6.3 and 4.8.2 are affected) it is necessary to specify --bss-plt to get the final blrl in the _GOT2_TABLE_. Without this the last symbol does not get it's address relocated. For the P2041RDB board this ended up being NetArpWaitTimerStart which caused the ARP packets to timeout immediately. Signed-off-by: Joakim Tjernlund <joakim.tjernlund@transmode.se> Signed-off-by: Chris Packham <judge.packham@gmail.com> Acked-by: Joakim Tjernlund <joakim.tjernlund@transmode.se> Acked-by: Scott Wood <scottwood@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | powerpc/mpc85xx: Serdes protocol "00" is supportedEbony Zhu2014-09-24-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | "0x00" is a valid serdes protocol for QorIQ parts, and can not be used to test whether the serdes is enabled or disabled. Signed-off-by: Ebony Zhu <b45385@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | powerpc/8xxx: Fix in USB device-tree fixupramneek mehresh2014-09-24-11/+9
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix following issues in USB device-tree fixup: - returns when either dr_mode or phy_type not defined. This was terminating fix-up when only either property was defined in hwconfig string - updates dr_mode_type or dr_phy_type with junk value when their index is -1. Now these are updated only when their respective index is pointing to relevant types in modes[] and phys[] array - dr_mode_type and dr_phy_type were not NULL for each controller Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | kconfig: move CONFIG_OF_* to KconfigMasahiro Yamada2014-09-25-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit moves: CONFIG_OF_CONTROL CONFIG_OF_SEPARATE CONFIG_OF_EMBED CONFIG_OF_HOSTFILE Because these options are currently not supported for SPL, the "Device Tree Control" menu does not appear in the SPL configuration. Note: zynq-common.h should be adjusted so as not to change the default value of CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org> Cc: Stephen Warren <swarren@nvidia.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Acked-by: Michal Simek <michal.simek@xilinx.com>
* | cosmetic: replace MIN, MAX with min, maxMasahiro Yamada2014-09-24-23/+23
| | | | | | | | | | | | | | The macro MIN, MAX is defined as the aliase of min, max, respectively. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* | mpc8xx: move common linker scripts into the CPU directoryMasahiro Yamada2014-09-24-0/+82
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Each CPU of PowerPC has its default linker script under the CPU directory, except mpc8xx. Every mpc8xx board has its own linker script under the board directory, resulting in lots of duplication of linker scripts. I notice eight mpc8xx boards have the same linker script. We can decrease the number of linker scripts by putting a single default linker script, arch/powerpc/cpu/mpc8xx/u-boot.lds. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Wolfgang Denk <wd@denx.de> Acked-by: Stefan Roese <sr@denx.de>
* | arm: kirkwood: spi.h: Add some missing parenthesisStefan Roese2014-09-24-4/+4
|/ | | | | | Signed-off-by: Stefan Roese <sr@denx.de> Tested-by: Luka Perkov <luka@openwrt.org> Reviewed-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
* Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'Albert ARIBAUD2014-09-21-0/+78
|\
| * ARM: keystone: ddr3: workaround for ddr3a/3b memory issueMurali Karicheri2014-09-17-0/+78
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch implements a workaround to fix DDR3 memory issue. The code for workaround detects PGSR0 errors and then preps for and executes a software-controlled hard reset.In board_early_init, where logic has been added to identify whether or not the previous reset was a PORz. PLL initialization is skipped in the case of a software-controlled hard reset. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Keegan Garcia <kgarcia@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
* | ARM: atmel: add pcr related definitionBo Shen2014-09-19-1/+2
| | | | | | | | | | | | | | | | Using CPU_HAS_PCR micro to present the SoC has pcr (peripheral control register). Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
* | ARM: atmel: use pcr to enable or disable peripheral clockBo Shen2014-09-19-4/+25
| | | | | | | | | | | | | | | | When use pcr (peripheral control register), then we won't need to care about the peripheral ID. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
* | ARM: atmel: sama5d3: add timings registerBo Shen2014-09-19-1/+2
| | | | | | | | | | | | Signed-off-by: Bo Shen <voice.shen@atmel.com> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2014-09-17-165/+313
|\ \ | |/
| * Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'Albert ARIBAUD2014-09-17-165/+313
| |\
| | * imx: Fix build of mx6sxsabresdStefano Babic2014-09-11-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 224beb833e544b802f08765271cec07667d39669 add clock enabling function for FEC, but the masks are not available for SX processor and the mx6sxsabresd cannot be built clean. Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Fabio Estevam <fabio.estevam@freescale.com> CC: Nikita Kiryanov <nikita@compulab.co.il>
| | * pcie_imx: Add mx6solox supportFabio Estevam2014-09-09-4/+22
| | | | | | | | | | | | | | | | | | | | | Let PCI on mx6solox also be supported. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Marek Vasut <marex@denx.de>
| | * mx6: imx-regs: Provide a structure for GPC registersFabio Estevam2014-09-09-0/+13
| | | | | | | | | | | | | | | | | | | | | Introduce a structure for accessing the General Power Controller block (GPC) registers. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| | * mx6qsabreauto: Remove imx6q-sabreauto.dtsFabio Estevam2014-09-09-14/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit fa9c021632473 ("mx6: add example DTB for mx6qsabreauto") introduced 'imx6q-sabreauto.dts' but it adds no real value as the dts file only contains the 'model' and 'compatible' strings. After this commit the final binary is also changed from 'u-boot.imx' to 'u-boot-dtb.imx', which may confuse users. So revert it until a more complete and useful device tree could be provided. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
| | * mx6: Fix ECSPI typo in soc_boot_modesNikolay Dimitrov2014-09-09-4/+4
| | | | | | | | | | | | | | | | | | Signed-off-by: Nikolay Dimitrov <picmaster@mail.bg> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Anatolij Gustschin <agust@denx.de>
| | * iMX6: Disable the L2 before chaning the PL310 latencyYe.Li2014-09-09-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Latency parameters of PL310 Tag RAM latency control register and Data RAM Latency control register are set in L2 cache enable. And setting these registers must have PL310 NOT enabled. But when using Plugin mode boot, the PL310 is enabled by bootrom. The patch disables the PL310 before applying this setting. Signed-off-by: Ye.Li <Ye.Li@freescale.com>
| | * arm: mx6: add support for Compulab cm-fx6 CoMNikita Kiryanov2014-09-09-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add initial support for Compulab CM-FX6 CoM. Support includes MMC, SPI flash, and SPL with dynamic DRAM detection. Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Stefano Babic <sbabic@denx.de> Cc: Tom Rini <trini@ti.com> Cc: Marek Vasut <marex@denx.de> Cc: Simon Glass <sjg@chromium.org> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
| | * arm: mx6: add get_cpu_type()Nikita Kiryanov2014-09-09-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | Define get_cpu_type(). Reuse it in is_cpu_type(). Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Stefano Babic <sbabic@denx.de> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
| | * arm: mx6: ddr: fix cs0_end calculationNikita Kiryanov2014-09-09-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current way of calculation CS0_END field for MMDCx_MDASP register is problematic because in most cases the user is forced to define cs_density in an unnatural way: as value - 2, instead of value. This breaks the abstraction provided by struct mx6_ddr_sysinfo because the user is forced to be aware of the way the calculation is performed. Refactor the calculation. Cc: Stefano Babic <sbabic@denx.de> Cc: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
| | * arm: mx6: ddr: configure MMDC for slow_pdNikita Kiryanov2014-09-09-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to MX6 TRM, both MMDC and DRAM should be configured to the same powerdown precharge. Currently, mx6_dram_cfg() configures MMDC for fast pd (MDPDC[7] = 0), and the DRAM for 'slow exit (DLL off)' (MR0[12] = 0). Configure MMDC for slow pd. Cc: Stefano Babic <sbabic@denx.de> Cc: Tim Harvey <tharvey@gateworks.com> Cc: Igor Grinberg <grinberg@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Acked-by: Tim Harvey <tharvey@gateworks.com>
| | * arm: mx6: ddr: do not write into reserved bitNikita Kiryanov2014-09-09-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Bit 16 in mapsr register is in a reserved field. Don't write to it. Cc: Stefano Babic <sbabic@denx.de> Cc: Tim Harvey <tharvey@gateworks.com> Acked-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
| | * arm: mx6: ddr: cleanupNikita Kiryanov2014-09-09-141/+137
| | | | | | | | | | | | | | | | | | | | | | | | | | | No functional changes. Cc: Stefano Babic <sbabic@denx.de> Cc: Tim Harvey <tharvey@gateworks.com> Acked-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
| | * i2c: imx: add macros to setup pads for multiple SoC typesNikita Kiryanov2014-09-09-0/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add macro which defines i2c_pads_info structs for multiple SoC types, and a macro which selects the appropriate struct based on CPU type, thus eliminating the need to manage multiple i2c pad configurations manually when supporting multiple SoC types. Cc: Stefano Babic <sbabic@denx.de> Cc: Tim Harvey <tharvey@gateworks.com> Acked-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
| | * mx6: add clock enabling functionsNikita Kiryanov2014-09-09-0/+95
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add functions to enable/disable clocks for UART, SPI, ENET, and MMC. Cc: Stefano Babic <sbabic@denx.de> Cc: Igor Grinberg <grinberg@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
* | | Revert "ARM: SPL: do not set gd again"Tom Rini2014-09-16-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At the high level, the problem is that we set gd multiple times (and still do, even after the commit we're reverting). We set important parts of gd to the copy which is not above stack but rather in the data section. For the release, we're going to revert this change and for the next release we shall correct things to only, really, set gd once to an appropriate location and ensure that comments about it are correct too. This reverts commit f0c3a6c4ad09210d5d4aeafe87685ee75e5683d6. Acked-by: Albert Aribaud <albert.u.boot@aribaud.net> Signed-off-by: Tom Rini <trini@ti.com>
* | | kconfig: armv8: move CONFIG_ARM64 to KconfigMasahiro Yamada2014-09-16-0/+14
| | | | | | | | | | | | Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* | | vexpress64: kconfig: consolidate CONFIG_TARGET_VEXPRESS_AEMV8A_SEMIMasahiro Yamada2014-09-16-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | We do not have to distinguish CONFIG_TARGET_VEXPRESS_AEMV8A_SEMI from CONFIG_TARGET_VEXPRESS_AEMV8A. Rename the former to the latter. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Reviewed-by: Steve Rae <srae@broadcom.com> Cc: David Feng <fenghua@phytium.com.cn>
* | | kconfig: remove redundant "string" type in arch and board KconfigsMasahiro Yamada2014-09-13-67/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now the types of CONFIG_SYS_{ARCH, CPU, SOC, VENDOR, BOARD, CONFIG_NAME} are specified in arch/Kconfig. We can delete the ones in arch and board Kconfig files. This commit can be easily reproduced by the following command: find . -name Kconfig -a ! -path ./arch/Kconfig | xargs sed -i -e ' /config[[:space:]]SYS_\(ARCH\|CPU\|SOC\|\VENDOR\|BOARD\|CONFIG_NAME\)/ { N s/\n[[:space:]]*string// } ' Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* | | kconfig: add CONFIG_SYS_{ARCH, CPU, ...} type def to arch/KconfigMasahiro Yamada2014-09-13-0/+56
| | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds the type definitions (+ help messages) of CONFIG_SYS_{ARCH, CPU, SOC, VENDOR, BOARD, CONFIG_NAME} to arch/Kconfig, which would save lots of type defs for taget boards. (See also the next commit.) Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* | | Merge branch 'master' of git://git.denx.de/u-boot-dmTom Rini2014-09-13-16/+309
|\ \ \
| * | | tegra: dts: Add serial port detailsSimon Glass2014-09-10-10/+290
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some Tegra device tree files do not include information about the serial ports. Add this and also add information about the input clock speed. The console alias needs to be set up to indicate which port is used for the console. Also add a binding file since this is missing. Series-changes; 5 - Add full serial port nodes from Linux tree (commit fc9d4dbe) - Use /chosen/stdout-path instead of /aliases/console to specify the console Signed-off-by: Simon Glass <sjg@chromium.org>
| * | | sandbox: dts: Add a serial console nodeSimon Glass2014-09-10-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the sandbox device tree is provided to U-Boot (with the -d flag) then it will use the device tree version in preference to the built-in device. The only difference is the colour. Signed-off-by: Simon Glass <sjg@chromium.org>
| * | | tegra: Convert tegra GPIO driver to use driver modelSimon Glass2014-09-10-6/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is an implementation of GPIOs for Tegra that uses driver model. It has been tested on trimslice and also using the new iotrace feature. The implementation uses a top-level GPIO device (which has no actual GPIOS). Under this all the banks are created as separate GPIO devices. The GPIOs are named as per the Tegra datasheet/header files: A0..A7, B0..B7, ..., Z0..Z7, AA0..AA7, etc. Since driver model is not yet available before relocation, or in SPL, a special function is provided for seaboard's SPL code. Signed-off-by: Simon Glass <sjg@chromium.org>
* | | | Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2014-09-12-70/+417
|\ \ \ \ | |/ / / |/| / / | |/ /
| * | arm: Fix _start for CONFIG_SYS_DV_NOR_BOOT_CFGBenoît Thébaudeau2014-09-11-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The boards using CONFIG_SYS_DV_NOR_BOOT_CFG (i.e. calimain, da850evm_direct_nor and enbw_cmc) had the _start symbol defined after the CONFIG_SYS_DV_NOR_BOOT_CFG word rather than before it in arch/arm/lib/vectors.S. Because of that, if by lack of luck 'gd->mon_len = (ulong)&__bss_end - (ulong)_start' (see setup_mon_len()) was a multiple of 4 kiB (see reserve_uboot()), then the last BSS word overlapped the first word of the following reserved RAM area (or went beyond the top of RAM without such an area) after relocation because __image_copy_start did not match _start (see relocate_code()). This was broken by commit 41623c9 'arm: move exception handling out of start.S files', which defined _start twice (before and after the CONFIG_SYS_DV_NOR_BOOT_CFG word), then by commit 0a26e1d 'arm: fix a double-definition error of _start symbol', which kept the definition of the _start symbol after the CONFIG_SYS_DV_NOR_BOOT_CFG word. This new commit fixes this issue by restoring the original behavior, i.e. by defining the _start symbol before the CONFIG_SYS_DV_NOR_BOOT_CFG word. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Manfred Rudigier <manfred.rudigier@omicron.at> Cc: Christian Riesch <christian.riesch@omicron.at> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Cc: Heiko Schocher <hs@denx.de>
| * | arm: Make reset position-independentBenoît Thébaudeau2014-09-11-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some boards, like mx31pdk and tx25, require the beginning of the SPL code to be position-independent. For these two boards, this is because they use the i.MX external NAND boot, which starts by executing the first NAND Flash page from the NFC page buffer. The SPL then needs to copy itself to its actual link address in order to free the NFC page buffer and use it to load the non-SPL image from Flash before running it. This means that the SPL runtime address differs from its link address between the reset and the initial copy performed by board_init_f(), so this part of the SPL binary must be position-independent. This requirement was broken by commit 41623c9 'arm: move exception handling out of start.S files', which used an absolute address to branch to the reset routine. This new commit restores the original behavior, which just performed a relative branch. This fixes the boot of mx31pdk and tx25. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com> Reported-by: Helmut Raiger <helmut.raiger@hale.at> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Magnus Lilja <lilja.magnus@gmail.com> Cc: John Rigby <jcrigby@gmail.com> Tested-by: Magnus Lilja <lilja.magnus@gmail.com>
| * | eabi_compat: add __aeabi_memcpy __aeabi_memsetJeroen Hofstee2014-09-09-2/+13
| | | | | | | | | | | | | | | cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
| * | ARM: make gd a function for clangJeroen Hofstee2014-09-09-0/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | "clang does not support global register variables; this is unlikely to be implemented soon because it requires additional LLVM backend support" [1] Workaround it by obtaining the value of gd/r9 by an inline asm routine. Note there is no set routine added for ARM at the moment, since most if not all updates of gd from c are actually not needed for ARM. [1] http://clang.llvm.org/docs/UsersManual.html cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
generated by cgit v1.1 at 2024-12-29 06:29:49 +0000