summaryrefslogtreecommitdiff
path: root/arch
Commit message (Collapse)AuthorAgeLines
* mx6: Distinguish mx6dual from mx6quadFabio Estevam2014-02-11-3/+14
| | | | | | | | | | | | Currently when we boot a mx6dual U-boot reports that it is a mx6quad. Report it as MX6D instead: CPU: Freescale i.MX6D rev1.2 at 792 MHz Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefano babic <sbabic@denx.de> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
* imx: Introduce a header for the imx cpu versionsFabio Estevam2014-02-11-13/+14
| | | | | | | Instead of duplicating the CPU definitions at mx5 and mx6 sys_proto.h header files, introduce a common header to centralize such definitions. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* imx6: make sure MMDC_CHx_MASK is clear to avoid warm reset failureAnson Huang2014-02-11-0/+11
| | | | | | | | | Boot ROM may mask MMDC_CHx_MASK in CCM_CCDR(such as i.MX6SL TO1.2), it will cause warm reset fail, need to clear this MMDC_CHx_MASK field to make sure all the i.MX6 series SOCs reset function work. Otherwise, uboot "reset" command will fail, tested on i.MX6SL EVK board with TO1.2. Signed-off-by: Anson Huang <b20788@freescale.com>
* imx6: ensure AHB clock is 132MHz in low freq boot modeAnson Huang2014-02-11-0/+20
| | | | | | | | | | | | For low freq boot mode(ARM boot up with 396MHz), ROM will not set AHB clock to 132MHz, and the reset value of AHB divider is incorrect which will lead to wrong AHB rate, need to correct it. To enable low freq boot mode, need to set BOOT_CFG2[2] to high, tested on i.MX6Q/DL SabreSD board and i.MX6SL EVK board. Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Anson Huang <b20788@freescale.com>
* ARM: mx6: Add PCI express driverMarek Vasut2014-01-26-0/+27
| | | | | | | | | | | | Add PCIe driver for the Freescale i.MX6 SoC . This driver operates the PCIe block in RC mode only, the EP mode is NOT supported. The driver is tested with the Intel e1000 NIC driver. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Eric Nelson <eric.nelson@boundarydevices.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
* ARM: mx6: Add PCI express clock configurationMarek Vasut2014-01-26-10/+66
| | | | | | | | | | | | | | | | Split the SATA clock enabling function and add PCI express clock enabling function. The SATA clock enabling function starts up the 100MHz SATA reference PLL in ENET_PLL register, but the code can be re-used to enable the 125MHz PCIe reference in ENET_PLL, so pull this code into separate function. Moreover, add the PCIe clock enabling code. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Eric Nelson <eric.nelson@boundarydevices.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
* ARM: armv7: Make indirect vector addresses globlMarek Vasut2014-01-26-0/+7
| | | | | | | | | | | | | Make indirect vectors addresses global, so they can be replaced by various code that needs to do so. For example the MX6 PCI express driver needs to temporarily replace data abort handler when reading the config space. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Eric Nelson <eric.nelson@boundarydevices.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
* Merge branch 'master' of git://git.denx.de/u-boot-armStefano Babic2014-01-26-131/+2997
|\
| * arm: rmobile: Add SH QSPI base register addressNobuhiro Iwamatsu2014-01-16-0/+2
| | | | | | | | | | | | | | | | This adds base register address of SH QSPI. Currently, SH QSPI is used only from R8A7790 and R8A7791. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'Albert ARIBAUD2014-01-15-2/+19
| |\
| * | arm: use canonical sub mnemonicAndreas Bießmann2014-01-14-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Building some arm boards with older binutils may produce errors like this: ---8<--- crt0.S: Assembler messages: crt0.S:70: Error: register expected, not '#(184)' -- `sub sp,#(184)' --->8--- Use canonical version of the subtract mnemonic to avoid those issues. Reported-by: Alexey Smishlayev <alexey@xtech2.lv> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
| * | Merge 'u-boot-imx/master' into 'u-boot-arm/master'Albert ARIBAUD2014-01-14-1/+2
| |\ \
| * | | arm: put .hash, .got.plt and .machine_param back in binariesAlbert ARIBAUD2014-01-14-3/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some targets will build fine but not boot if sections .hash and .got.plt are not present in the binary. Add them back. Also, Exynos machines require .machine_param section in SPL. Add it. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net> Tested-by: Rajeshwari S Shinde <rajeshwari.s@samsung.com>
| * | | ARM: pxa: Fix OneNAND SPL buildsMarek Vasut2014-01-13-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The OneNAND SPL used on PXA is slightly obscure. Due to the OneNAND limitation, where we have only the first 1KiB of the OneNAND available upon power-up as a memory-mapped area, from which the CPU starts executing, we place only the most essential code into this first 1KiB . This code copies the rest of the SPL into SRAM and jumps to it. This code is stored in section .text.0 . The rest of the SPL is stored in section .text.1 . When running the OBJCOPY on the SPL, it will preserve only .text section, but the .text.0 and .text.1 are stripped away from the result, thus making the SPL binary empty. The patch adds additional -j parameters to the OBJCOPY for PXA during the SPL build, which will preserve the .text.0 and .text.1 sections. Moreover, this patch also adds missing functions into the .text.0 section, since otherwise the PXA270 with 1KiB-window OneNAND won't be able to boot. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@ti.com>
| * | | Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2014-01-10-3900/+8531
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Bringing in the MMC tree means that CONFIG_BOUNCE_BUFFER needed to be added to include/configs/exynos5-dt.h now. Conflicts: include/configs/exynos5250-dt.h Signed-off-by: Tom Rini <trini@ti.com>
| | * | | gpio: zynq: Add dummy gpio routinesJagannadha Sutradharudu Teki2014-01-10-0/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | GPIO dummy routines are required for fdt build, may be removed these dependencies once the u-boot fdt is fully optimized. Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
| | * | | dts: zynq: Add basic fdt supportJagannadha Sutradharudu Teki2014-01-10-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch provides a basic fdt support for zynq u-boot. zynq-7000.dtsi-> initial arch dts file zynq-zed.dts -> initial zed board dts file more devices should be added in subsequent patches. u-boot build: once configuring of a board done for building dtb with zynq-zed.dts as an input zynq-uboot> make DEVICE_TREE=zynq-zed Enabled CONFIG_OF_SEPARATE for building dtb separately. There is a new binary called u-boot-dtb.bin which is a u-boot with devicetree supported. Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
| | * | | zynq: Add support to find bootmodeJagannadha Sutradharudu Teki2014-01-10-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Added support to find the bootmodes by reading slcr bootmode register. this can be helpful to autoboot the configurations w.r.t a specified bootmode. Added this functionality on board_late_init as it's not needed for normal initializtion part. Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
| | * | | armv8: Use __aarch64__ rather than CONFIG_ARM64 in some casesTom Rini2014-01-10-18/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The toolchain sets __aarch64__ for both LE and BE. In the case of posix_types.h we cannot reliably use config.h as that will lead to problems. In the case of byteorder.h it's clearer to check the EB flag being set in either case instead. Cc: David Feng <fenghua@phytium.com.cn> Signed-off-by: Tom Rini <trini@ti.com> Amended by Albert ARIBAUD <albert.u.boot@aribaud.net> to actually remove the config.h include from the posix_types.h files, with permission from Tom Rini.
| | * | | arm64: core supportDavid Feng2014-01-09-21/+1819
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Relocation code based on a patch by Scott Wood, which is: Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: David Feng <fenghua@phytium.com.cn>
| * | | | Merge branch 'master' of git://git.denx.de/u-boot-mmcTom Rini2014-01-09-0/+77
| |\ \ \ \
| | * | | | socfpga/dwmmc: Adding DesignWare MMC driver support for SOCFPGAChin Liang See2014-01-09-0/+77
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To add the DesignWare MMC driver support for Altera SOCFPGA. It required information such as clocks and bus width from platform specific files (SOCFPGA handoff files) Signed-off-by: Chin Liang See <clsee@altera.com> Cc: Rajeshwari Shinde <rajeshwari.s@samsung.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Wolfgang Denk <wd@denx.de> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
| * | | | | Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini2014-01-09-19/+9
| |\ \ \ \ \
| | * | | | | sh: sh2: Remove CONFIG_SH2A definition from asm/processor.hNobuhiro Iwamatsu2014-01-09-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SH2 and SH2A use a common header. Both checks are not necessary. This removes CONFIG_SH2A definition from asm/processor.h. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| | * | | | | sh: sh4: Remove CONFIG_SH4A definition from source codeNobuhiro Iwamatsu2014-01-09-13/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SH4 and SH4A are compatible. But some instructions are different from these. In Linux kernel, It is treated as a separate CPU, but for now, I think that there is no need to divide especially in the U-Boot. This removes CONFIG_SH4A definition from source code, SH4A is treated as SH4. And this fix white space. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| | * | | | | sh: sh2: Change CONFIG_SYS_HZ to CONFIG_SH_CMT_CLK_FREQNobuhiro Iwamatsu2014-01-08-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_SYS_HZ of SH2 is not used as frequency of base timer. This is the correct clock of CMT. This changes from CONFIG_SYS_HZ to CONFIG_SH_CMT_CLK_FREQ, in order to use CONFIG_SYS_HZ as clock of CMT. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
| | * | | | | sh: sh4: Add CONFIG_SH4 definition to config.mk of SH4Nobuhiro Iwamatsu2014-01-08-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| | * | | | | sh: sh3: Add CONFIG_SH3 definition to config.mk of SH3Nobuhiro Iwamatsu2014-01-08-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| | * | | | | sh: sh2: Add CONFIG_SH2 definition to config.mk of SH2Nobuhiro Iwamatsu2014-01-08-1/+1
| | |/ / / / | | | | | | | | | | | | | | | | | | Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | | | | sandbox: Add a prototype for cleanup_before_linux()Simon Glass2014-01-08-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This function is defined but has no prototype declaration. Add it. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
| * | | | | sandbox: Add facility to save/restore sandbox stateSimon Glass2014-01-08-4/+490
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It is often useful to be able to save out the state from a sandbox test run, for analysis or to restore it later to continue a test. Add generic infrastructure for doing this using a device tree binary file. This is a flexible tagged file format which is already supported by U-Boot, and it supports hierarchy if needed. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Hung-ying Tyan <tyanh@chromium.org>
| * | | | | sandbox: Allow reading/writing of RAM bufferSimon Glass2014-01-08-3/+98
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It is useful to be able to save and restore the RAM contents of sandbox U-Boot either for setting up tests, for later analysys, or for chaining together multiple tests which need to keep the same memory contents. Add a function to provide a memory file for U-Boot. This is read on start-up and written when shutting down. If the file does not exist on start-up, it will be created when shutting down. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
| * | | | | sandbox: Add -i option to enter interactive modeSimon Glass2014-01-08-1/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Normally when U-Boot starts with a command (-c option) it quits when the command completes. Normally this is what is requires, since the test is likely complete. Provide an option to jump into the console instead, so that debugging or other tasks may be performed before quitting. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
| * | | | | sandbox: Allow the console to work earlierSimon Glass2014-01-08-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With sandbox, errors and problems may be reported before console_init_f() is executed. For example, an argument may not parse correctly or U-Boot may panic(). At present this output is swallowed so there is no indication what is going wrong. Adjust the console to deal with a very early sandbox setup, by detecting that there is no global_data yet, and calling os functions in that case. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
| * | | | | sandbox: Implement the bootm command for sandboxSimon Glass2014-01-08-2/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When sandbox does a 'bootm' to run a kernel we cannot actually execute it. So just exit sandbox, which is essentially what U-Boot does on other archs. Also, allow sandbox to use bootm on any kernel, so that it can be used to test booting of kernels from any architecture. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
| * | | | | sandbox: Allow return from board_init_f()Simon Glass2014-01-08-5/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The execution flow becomes easier if we can return from board_init_f() as ARM does. We can control things from start.c instead of having to call back into that file from other places. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
| * | | | | sandbox: Correct help message <arg> garblingSimon Glass2014-01-08-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The <arg> is displayed for options with no argument, and omitted for those with an argument. Swap this around. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
| * | | | | sandbox: Improve/augment memory allocation functionsSimon Glass2014-01-08-2/+43
| |/ / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Implement realloc() and free() for sandbox, by adding a header to each block which contains the block size. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Che-Liang Chiou <clchiou@chromium.org> Reviewed-by: Hung-ying Tyan <tyanh@chromium.org>
| * | | | powerpc/t208x: fix macro CONFIG_SYS_FSL_NUM_USB_CTRLSShengzhou Liu2014-01-02-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_SYS_FSL_NUM_USB_CTRLS is no longer used, update it to new CONFIG_USB_MAX_CONTROLLER_COUNT. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
| * | | | powerpc/mpc85xx: Add support for single source clockingPriyanka Jain2014-01-02-2/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Single-source clocking is new feature introduced in T1040. In this mode, a single differential clock is supplied to the DIFF_SYSCLK_P/N inputs to the processor, which in turn is used to supply clocks to the sysclock, ddrclock and usbclock. So, both ddrclock and syclock are driven by same differential sysclock in single-source clocking mode whereas in normal clocking mode, generally separate DDRCLK and SYSCLK pins provides reference clock for sysclock and ddrclock DDR_REFCLK_SEL rcw bit is used to determine DDR clock source -If DDR_REFCLK_SEL rcw bit is 0, then DDR PLLs are driven in normal clocking mode by DDR_Reference clock -If DDR_REFCLK_SEL rcw bit is 1, then DDR PLLs are driven in single source clocking mode by DIFF_SYSCLK Add code to determine ddrclock based on DDR_REFCLK_SEL rcw bit. Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
| * | | | sh: add support for sh7753evb boardYoshihiro Shimoda2013-12-18-0/+199
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The SH7753 EVB board has SH7753, 512MB DDR3-SDRAM, SPI ROM, Gigabit Ethernet, and eMMC. This patch support the following functions: - 512MB DDR3-SDRAM, SCIF4, SPI ROM, Gigabit Ethernet, eMMC Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | | | Merge branch 'master' of git://git.denx.de/u-boot-blackfinTom Rini2013-12-16-11/+20
| |\ \ \ \
| | * | | | blackfin: remove build warningSonic Zhang2013-12-16-10/+15
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
| | * | | | blackfin: fixing warning by including proper headersSonic Zhang2013-12-16-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
| * | | | | Makefile: Select objects by CONFIG_ rather than $(ARCH) or $(CPU)Masahiro Yamada2013-12-16-7/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert like follows: CPU mpc83xx -> CONFIG_MPC83xx CPU mpc85xx -> CONFIG_MPC85xx CPU mpc86xx -> CONFIG_MPC86xx CPU mpc5xxx -> CONFIG_MPC5xxx CPU mpc8xx -> CONFIG_8xx CPU mpc8260 -> CONFIG_8260 CPU ppc4xx -> CONFIG_4xx CPU x86 -> CONFIG_X86 ARCH x86 -> CONFIG_X86 ARCH powerpc -> CONFIG_PPC Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * | | | | common/cmd_bootm: extend do_bootm_vxworks to support the new VxWorks boot ↵Miao Yan2013-12-16-0/+79
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | interface. The next version VxWorks adopts device tree (for PowerPC and ARM) as its hardware description mechanism. For PowerPC, the boot interface conforms to the ePAPR standard, which is: void (*kernel_entry)(ulong fdt_addr, ulong r4 /* 0 */, ulong r5 /* 0 */, ulong r6 /* EPAPR_MAGIC */, ulong r7 /* IMA size */, ulong r8 /* 0 */, ulong r9 /* 0 */) For ARM, the boot interface is: void (*kernel_entry)(void *fdt_addr) Signed-off-by: Miao Yan <miao.yan@windriver.com> [trini: Fix build error when !CONFIG_OF_FDT is set, typo on PowerPC, missing extern ft_fixup_num_cores] Signed-off-by: Tom Rini <trini@ti.com>
| * | | | | PowerPC: merge commonly-defined flagsMasahiro Yamada2013-12-13-39/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PLATFORM_RELFLAGS += -meabi PLATFORM_CPPFLAGS += -ffixed-r2 were defined in all arch/powerpc/${CPU}/config.mk. This commit moves them to arch/powerpc/config.mk. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * | | | | ARM:PXA: Correct tick_to_time / us_to_tick to use lldivTom Rini2013-12-13-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Cc: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Tom Rini <trini@ti.com> Acked-by: Marek Vasut <marex@denx.de>
| * | | | | ARM:zynq: Correct __udelay to use lldivTom Rini2013-12-13-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Cc: Michal Simek <monstr@monstr.eu> Signed-off-by: Tom Rini <trini@ti.com>
| * | | | | Makefile: use two double-quotations as a pairMasahiro Yamada2013-12-13-2/+2
| |/ / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some editors such as Emacs can highlight source files. But their parser algorithm is not perfect. If you use one double-quotation alone, some editor cannot handle it nicely and mark source lines as a string by mistake. It is preferable to use two double-quotations as a pair. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
generated by cgit v1.1 at 2024-12-19 04:15:12 +0000