summaryrefslogtreecommitdiff
path: root/arch
Commit message (Collapse)AuthorAgeLines
* PCIe:change the method to get the address of a requested capability in ↵Zhao Qiang2013-10-16-18/+0
| | | | | | | | | | | | | | | | | | | configuration space. Previously, the address of a requested capability is define like that "#define PCI_DCR 0x78" But, the addresses of capabilities is different with regard to PCIe revs. So this method is not flexible. Now a function to get the address of a requested capability is added and used. It can get the address dynamically by capability ID. The step of this function: 1. Read Status register in PCIe configuration space to confirm that Capabilities List is valid. 2. Find the address of Capabilities Pointer Register. 3. Find the address of requested capability from the first capability. Signed-off-by: Zhao Qiang <B45475@freescale.com>
* powerpc/mpc85xx: Add workaround for erratum A006379York Sun2013-10-16-0/+40
| | | | | | | | | | | | Erratum A006379 says CPCHDBCR0 bit field [10:14] has incorrect default value after POR. The workaround is to set this field before enabling CPC to 0x1e. Erratum A006379 applies to T4240 rev 1.0 B4860 rev 1.0, 2.0 Signed-off-by: York Sun <yorksun@freescale.com>
* powerpc: Fix CamelCase warnings in DDR related codePriyanka Jain2013-10-16-464/+464
| | | | | | | | | | | Some DDR related structures present in fsl_ddr_dimm_params.h, fsl_ddr_sdram.h, ddr_spd.h has various parameters with embedded acronyms capitalized that trigger the CamelCase warning in checkpatch.pl Convert those variable names to smallcase naming convention and modify all files which are using these structures with modified structures. Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
* powerpc/mpc85xx:Avoid fix clk groups for Cluster & HW acceleratorPrabhakar Kushwaha2013-10-16-60/+89
| | | | | | | | | | | CHASSIS2 architecture never fix clock groups for Cluster and hardware accelerator like PME, FMA. These are SoC defined. SoC defines :- - NUM of PLLs present in the system - Clusters and their Clock group - hardware accelerator and their clock group if no clock group, then platform clock divider for FMAN, PME Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
* powerpc/mpc85xx:Update processor defines for T1040Prabhakar Kushwaha2013-10-16-8/+11
| | | | | | | | | | | | | | | T1040 SoC has - DDR controller ver 5.0 - 2 PLLs - 8 IFC Chip select - FMAN Muram 192K - No Srio - Sec controller ver 5.0 - Max CPU update for its personalities So, update the defines accordingly. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
* powerpc/mpc85xx:Make L2 cache type independent of CHASSIS2Prabhakar Kushwaha2013-10-16-5/+5
| | | | | | | | | | CHASSIS2 architecture never defines type of L2 cache present in SoC. it is dependent upon the core present in the SoC. for example, - e6500 core has L2 cluster (Kibo) - e5500 core has Backside L2 Cache Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
* powerpc: add CONFIG_SECURE_BOOT condition into fsl_secure_boot.hPo Liu2013-10-16-0/+2
| | | | | | | This patch is for board config file not to add CONFIG_SECURE_BOOT condition for include the asm/fsl_secure_boot.h. Signed-off-by: Po Liu <Po.Liu@freescale.com>
* microblaze: Fix watchdog initializationMichal Simek2013-10-16-4/+3
| | | | | | | | | | | The patch: "blackfin: Move blackfin watchdog driver out of the blackfin arch folder." (sha1: e9a389a18477c1c57a0b30e9ea8f4d38c6e26e63) changed hw_watchdog_init() prototype which didn't match with Microblaze one. This patch fixes the driver and Microblaze initialization. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* Coding Style cleanup: drop some excessive empty linesWolfgang Denk2013-10-14-2/+0
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* Coding Style cleanup: remove trailing empty linesWolfgang Denk2013-10-14-5/+0
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* Coding Style cleanup: replace leading SPACEs by TABsWolfgang Denk2013-10-14-42/+42
| | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Drop changes for PEP 4 following python tools] Signed-off-by: Tom Rini <trini@ti.com>
* Coding Style cleanup: remove trailing white spaceWolfgang Denk2013-10-14-88/+88
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* ARM: omap4-panda: Add MAC address creation for pandaDan Murphy2013-10-14-0/+4
| | | | | | | | Add a MAC address create based on the OMAP die ID registers. Then poplulate the ethaddr enviroment variable so that the device tree alias can be updated prior to boot. Signed-off-by: Dan Murphy <dmurphy@ti.com>
* ARM: omap4: Update sdram setting for panda rev A6Dan Murphy2013-10-14-0/+4
| | | | | | | | | | OMAP4 panda rev A6 is a 4430 es2.3 IC with an updated memory part. The panda rev A6 uses Elpida 2x4Gb memory and no longer uses Micron so the timings needs to be updated Signed-off-by: Dan Murphy <dmurphy@ti.com>
* Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2013-10-08-621/+69
|\
| * socfpga: Adding System Manager driverChin Liang See2013-10-07-1/+57
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adding System Manager driver which will configure the pin mux for real hardware Cyclone V development kit (not Virtual Platform) Signed-off-by: Chin Liang See <clsee@altera.com> Reviewed-by: Pavel Machek <pavel@denx.de> Acked-by: Dinh Nguyen <dinguyen@altera.com> Cc: Wolfgang Denk <wd@denx.de> CC: Pavel Machek <pavel@denx.de> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Tom Rini <trini@ti.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net>
| * omap1510inn: arm925t: remove supportAlbert ARIBAUD2013-10-07-608/+0
| | | | | | | | | | | | | | | | | | omap1510inn is orphan and has been for years now. Reove it and, as it was the only arm925t target, also remove arm925t support. Update doc/README.scrapyard accordingly. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
| * ARM: IGEP0033: Update timing to run DDR at 400MHz.Enric Balletbo i Serra2013-10-07-12/+12
| | | | | | | | | | | | | | We can run the DDR at 400MHz, so update the timings for that purpose. Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org>
* | Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini2013-10-08-2/+25
|\ \
| * | spi: exynos: Support word transfersRajeshwari Shinde2013-10-08-1/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since SPI register access is so expensive, it is worth transferring data a word at a time if we can. This complicates the driver unfortunately. Use the byte-swapping feature to avoid having to convert to/from big endian in software. This change increases speed from about 2MB/s to about 4.5MB/s. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Rajeshwari S Shinde <rajeshwari.s@samsung.com> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
| * | armv7: hw_data: change clock divider setting.Poddar, Sourav2013-10-07-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Clock requirement for qspi clk is 192 Mhz. According to the below formulae, f dpll = f ref * 2 * m /(n + 1) clockoutx2_Hmn = f dpll / (hmn+ 1) fref = 20 Mhz, m = 96, n = 4 gives f dpll = 768 Mhz For clockoutx2_Hmn to be 768, hmn + 1 should be 4. Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
| * | omap5: add qspi supportMatt Porter2013-10-07-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | Add QSPI definitions and clock configuration support. Signed-off-by: Matt Porter <matt.porter@linaro.org> Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
* | | ARM: virtualization: replace verbose license with SPDX identifierAndre Przywara2013-10-07-35/+3
|/ / | | | | | | | | | | | | | | | | The original creation of arch/arm/cpu/armv7/{virt-v7.c,nonsec_virt.S} predates the SPDX conversion, so the original elaborate license statements sneaked in. Fix this by replacing them with the proper abbreviation. Signed-off-by: Andre Przywara <andre.przywara@linaro.org>
* | Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2013-10-04-1/+455
|\ \ | |/
| * ARM: extend non-secure switch to also go into HYP modeAndre Przywara2013-10-03-9/+86
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For the KVM and XEN hypervisors to be usable, we need to enter the kernel in HYP mode. Now that we already are in non-secure state, HYP mode switching is within short reach. While doing the non-secure switch, we have to enable the HVC instruction and setup the HYP mode HVBAR (while still secure). The actual switch is done by dropping back from a HYP mode handler without actually leaving HYP mode, so we introduce a new handler routine in our new secure exception vector table. In the assembly switching routine we save and restore the banked LR and SP registers around the hypercall to do the actual HYP mode switch. The C routine first checks whether we are in HYP mode already and also whether the virtualization extensions are available. It also checks whether the HYP mode switch was finally successful. The bootm command part only calls the new function after the non-secure switch. Signed-off-by: Andre Przywara <andre.przywara@linaro.org>
| * ARM: add SMP support for non-secure switchAndre Przywara2013-10-03-1/+53
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently the non-secure switch is only done for the boot processor. To enable full SMP support, we have to switch all secondary cores into non-secure state also. So we add an entry point for secondary CPUs coming out of low-power state and make sure we put them into WFI again after having switched to non-secure state. For this we acknowledge and EOI the wake-up IPI, then go into WFI. Once being kicked out of it later, we sanity check that the start address has actually been changed (since another attempt to switch to non-secure would block the core) and jump to the new address. The actual CPU kick is done by sending an inter-processor interrupt via the GIC to all CPU interfaces except the requesting processor. The secondary cores will then setup their respective GIC CPU interface. While this approach is pretty universal across several ARMv7 boards, we make this function weak in case someone needs to tweak this for a specific board. The way of setting the secondary's start address is board specific, but mostly different only in the actual SMP pen address, so we also provide a weak default implementation and just depend on the proper address to be set in the config file. Signed-off-by: Andre Przywara <andre.przywara@linaro.org>
| * ARM: trigger non-secure state switch during bootm executionAndre Przywara2013-10-03-0/+13
| | | | | | | | | | | | | | | | | | To actually trigger the non-secure switch we just implemented, call the switching routine from within the bootm command implementation. This way we automatically enable this feature without further user intervention. Signed-off-by: Andre Przywara <andre.przywara@linaro.org>
| * ARM: add C function to switch to non-secure stateAndre Przywara2013-10-03-0/+126
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The core specific part of the work is done in the assembly routine in nonsec_virt.S, introduced with the previous patch, but for the full glory we need to setup the GIC distributor interface once for the whole system, which is done in C here. The routine is placed in arch/arm/cpu/armv7 to allow easy access from other ARMv7 boards. We check the availability of the security extensions first. Since we need a safe way to access the GIC, we use the PERIPHBASE registers on Cortex-A15 and A7 CPUs and do some sanity checks. Boards not implementing the CBAR can override this value via a configuration file variable. Then we actually do the GIC enablement: a) enable the GIC distributor, both for non-secure and secure state (GICD_CTLR[1:0] = 11b) b) allow all interrupts to be handled from non-secure state (GICD_IGROUPRn = 0xFFFFFFFF) The core specific GIC setup is then done in the assembly routine. Signed-off-by: Andre Przywara <andre.przywara@linaro.org>
| * ARM: add assembly routine to switch to non-secure stateAndre Przywara2013-10-03-0/+125
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While actually switching to non-secure state is one thing, another part of this process is to make sure that we still have full access to the interrupt controller (GIC). The GIC is fully aware of secure vs. non-secure state, some registers are banked, others may be configured to be accessible from secure state only. To be as generic as possible, we get the GIC memory mapped address based on the PERIPHBASE value in the CBAR register. Since this register is not architecturally defined, we check the MIDR before to be from an A15 or A7. For CPUs not having the CBAR or boards with wrong information herein we allow providing the base address as a configuration variable. Now that we know the GIC address, we: a) allow private interrupts to be delivered to the core (GICD_IGROUPR0 = 0xFFFFFFFF) b) enable the CPU interface (GICC_CTLR[0] = 1) c) set the priority filter to allow non-secure interrupts (GICC_PMR = 0xFF) Also we allow access to all coprocessor interfaces from non-secure state by writing the appropriate bits in the NSACR register. The generic timer base frequency register is only accessible from secure state, so we have to program it now. Actually this should be done from primary firmware before, but some boards seems to omit this, so if needed we do this here with a board specific value. The Versatile Express board does not need this, so we remove the frequency from the configuration file here. After having switched to non-secure state, we also enable the non-secure GIC CPU interface, since this register is banked. Since we need to call this routine also directly from the smp_pen later (where we don't have any stack), we can only use caller saved registers r0-r3 and r12 to not mess with the compiler. Signed-off-by: Andre Przywara <andre.przywara@linaro.org>
| * ARM: add secure monitor handler to switch to non-secure stateAndre Przywara2013-10-03-0/+57
| | | | | | | | | | | | | | | | | | | | | | | | | | | | A prerequisite for using virtualization is to be in HYP mode, which requires the CPU to be in non-secure state first. Add a new file in arch/arm/cpu/armv7 to hold a monitor handler routine which switches the CPU to non-secure state by setting the NS and associated bits. According to the ARM architecture reference manual this should not be done in SVC mode, so we have to setup a SMC handler for this. We create a new vector table to avoid interference with other boards. The MVBAR register will be programmed later just before the smc call. Signed-off-by: Andre Przywara <andre.przywara@linaro.org>
| * ARM: prepare armv7.h to be included from assembly sourceAndre Przywara2013-10-03-1/+5
| | | | | | | | | | | | | | | | armv7.h contains some useful constants, but also C prototypes. To include it also in assembly files, protect the non-assembly part appropriately. Signed-off-by: Andre Przywara <andre.przywara@linaro.org>
* | Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2013-10-02-900/+442
|\ \ | |/
| * Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'Albert ARIBAUD2013-10-02-34/+313
| |\
| | * i.MX6DQ/DLS: Add pad MX6_PAD_GPIO_1__USB_OTG_IDEric Nelson2013-09-27-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds the pad to i.MX6DQ and changes the i.MX6DLS declaration to match the Linux kernel declaration. Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com> Acked-by: Marek Vasut <marex@denx.de>
| | * mx6: Fix use of improper value in enable_ipu_clockPierre Aubert2013-09-27-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | The value MXC_CCM_CCGR3_IPU1_IPU_DI0_OFFSET that was used to initialize the CCGR3 register caused an undefined value for CG0. Signed-off-by: Pierre Aubert <p.aubert@staubli.com> CC: Stefano Babic <sbabic@denx.de> Acked-by: Eric Nelson <eric.nelson@boundarydevices.com>
| | * i.MX6DL/S: add drive-strength back to pads DISP0_DAT2/DAT10Eric Nelson2013-09-20-2/+2
| | | | | | | | | | | | | | | | | | | | | This patch fixes a regression introduced by commit 87d720e0. Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
| | * mx6slevk: Add Ethernet supportFabio Estevam2013-09-20-0/+48
| | | | | | | | | | | | | | | | | | | | | | | | mx6slevk has a SMSC8720 connected in RMII mode. Add support for it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| | * ARM: arch-mx6: fix PLL2_PFD2_FREQMarkus Niebel2013-09-20-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | according to the manual frequency of PLL2 PFD2 is 396.000.000 instead of 400.000.000 Signed-off-by: Markus Niebel <Markus.Niebel@tqs.de> Acked-by: Stefano Babic <sbabic@denx.de>
| | * Merge branch 'master' of git://git.denx.de/u-boot-armStefano Babic2013-09-13-7/+31
| | |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: MAINTAINERS boards.cfg Signed-off-by: Stefano Babic <sbabic@denx.de>
| | * | mx27: add missing constant for mx27trem2013-09-10-1/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add some missing constant (chip select, ...) Signed-off-by: Philippe Reynes <tremyfr@yahoo.fr> Signed-off-by: Eric Jarrige <eric.jarrige@armadeus.org> Acked-by: Stefano Babic <sbabic@denx.de>
| | * | ARM: mxs: Receive r0 and r1 passed from BootROMMarek Vasut2013-09-10-24/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make sure value in register r0 and r1 is preserved and passed to the board_init_ll() and mxs_common_spl_init() where it can be processed further. The value in r0 can be configured during the BootStream generation to arbitary value, r1 contains pointer to return value from CALL'd function. This patch also clears the value in r0 before returning to BootROM to make sure the BootROM is not confused by this value. Finally, this patch cleans up some comments in the start.S file. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
| | * | ARM: mxs: Document the power block initializationMarek Vasut2013-09-10-0/+209
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds documentation for the functions used during the initialization of MXS power block. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
| | * | mx6: Fix calculation of emi_slow clock rateAndrew Gabbasov2013-09-10-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is porting of Freescale's patch from version imx_v2009.08_3.0.35_4.0.0, that fixes the obvious mistype of bits offset macro name (ACLK_EMI_PODF_OFFSET was used instead of ACLK_EMI_SLOW_PODF_OFFSET). Using the occasion, change the variable name 'emi_slow_pof' to more consistent 'emi_slow_podf'. Signed-off-by: Jason Liu <r64343@freescale.com> Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com> Acked-by: Dirk Behme <dirk.behme@de.bosch.com>
| * | | Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'Albert ARIBAUD2013-10-02-28/+104
| |\ \ \
| | * | | ARM: OMAP5: Avoid writing into LDO SRAM bitsLokesh Vutla2013-09-20-25/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Writing magic bits into LDO SRAM was suggested only for OMAP5432 ES1.0. Now these are no longer applicable. Moreover these bits should not be overwritten as they are loaded from EFUSE. So avoid writing into these registers. Boot tested on OMAP5432 ES2.0 Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
| | * | | am335x:Handle worst case scenario for Errata 1.0.24Steve Kipisz2013-09-20-2/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In Errata 1.0.24, if the board is running at OPP50 and has a warm reset, the boot ROM sets the frequencies for OPP100. This patch attempts to drop the frequencies back to OPP50 as soon as possible in the SPL. Then later the voltages and frequencies up set higher. Cc: Enric Balletbo i Serra <eballetbo@iseebcn.com> Cc: Lars Poeschel <poeschel@lemonage.de> Signed-off-by: Steve Kipisz <s-kipisz2@ti.com> [trini: Adapt to current framework] Signed-off-by: Tom Rini <trini@ti.com>
| | * | | am335x_evm: am33xx_spl_board_init function and scale core frequencyTom Rini2013-09-20-1/+69
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a am33xx_spl_board_init (and enable the PMICs) that we may see, depending on the board we are running on. In all cases, we see if we can rely on the efuse_sma register to tell us the maximum speed. In the case of Beaglebone White, we need to make sure we are on AC power, and are on later than rev A1, and then we can ramp up to the PG1.0 maximum of 720Mhz. In the case of Beaglebone Black, we are either on PG2.0 that supports 1GHz or PG2.1. As PG2.0 may or may not have efuse_sma set, we cannot rely on this probe. In the case of the GP EVM, EVM SK and IDK we need to rely on the efuse_sma if we are on PG2.1, and the defaults for PG1.0/2.0. Signed-off-by: Tom Rini <trini@ti.com>
| | * | | am33xx: Add the efuse_sma CONTROL_MODULE registerTom Rini2013-09-20-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Starting with PG2.1 we have a register in the CONTROL_MODULE that is set with the package type and maximum supported frequency. Add this, and the relevant mask/values. Signed-off-by: Tom Rini <trini@ti.com>
| | * | | am33xx: Add am33xx_spl_board_init function, callTom Rini2013-09-20-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We need to allow for a further call-out in spl_board_init. Call this am33xx_spl_board_init and add a __weak version. This function may be used to scale the MPU frequency up, depending on board needs. Signed-off-by: Tom Rini <trini@ti.com>
| * | | | ARM: use r9 for gdJeroen Hofstee2013-09-23-12/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To be more EABI compliant and as a preparation for building with clang, use the platform-specific r9 register for gd instead of r8. note: The FIQ is not updated since it is not used in u-boot, and under discussion for the time being. The following checkpatch warning is ignored: WARNING: Use of volatile is usually wrong: see Documentation/volatile-considered-harmful.txt Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl> cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
generated by cgit v1.1 at 2024-12-19 07:54:28 +0000