summaryrefslogtreecommitdiff
path: root/arch
Commit message (Collapse)AuthorAgeLines
* IGEP0046: SPL and UBOOT Testisee_imx_v2017.03_4.9.11_1.0.0_ga_TESTJose Miguel Sanchez Sanabria2019-02-05-8/+0
| | | | | | | it was created the following source files in board/isee/common: igep_test.c and igep_test.h it was CLEARED igep board folders that do not belong to u-boot-imx like igep00x0 and igep0030 Signed-off-by: Jose Miguel Sanchez Sanabria <jsanabria@iseebcn.com>
* IGEP0146: Initial commitJose Miguel Sanchez Sanabria2018-06-12-1/+9
| | | | | | | | | Structure folders defconfig initial ram config only UART will be configured for basic printf Signed-off-by: Jose Miguel Sanchez Sanabria <jsanabria@iseebcn.com>
* Ethernet fixed to 100 MbpsJose Miguel Sanchez Sanabria2018-02-07-1/+0
|
* Added support to igep0046Jose Miguel Sanchez Sanabria2018-01-12-0/+10
|
* MA-9554[Android_6DL_SD]RTC: Sometimes the RTC reset to the initial time 1970 ↵n7.1.2_2.0.0-gaZhang Bo2017-09-07-0/+12
| | | | | | | | | | | | | | after softare reboot the first time. 40% RTC timer is default disabled after power off and bootup again. it will be enabled in kernel rtc driver init. But rtc time is shorter than system clock, so rtc time cannot update to system clock in rtc_hctosys(), and the sysfs file /sys/class/rtc/rtc0/hctosys cat result is 0. Android AlarmManagerService cannot work normally when hctosys is 0. Enable RTC in u-boot so the time in RTC timer is longer than system clock. Change-Id: Ie8b1c1b36e5ab48031efe44dd06468ac35ca3d3b Signed-off-by: Zhang Bo <bo.zhang@nxp.com>
* MA-9409-3 Add base board support for android and android things.zhang sanshan2017-07-10-24/+51
| | | | | | | | | | | | | | | | | | * add board support for android and android things. mx6ul_nxpu_iopb, pico-6ul, pico-imx7d, aquila-6ul reorganize the Kconfig, and fix the redefine issue. * add android configure into configure-while * add a common file mx_android_common.h it will be included by android and android things. defconfig only include ANDROID_THINGS_SUPPORT or ANDROID_SUPPORT * move partition_table_valid into f_fastboot.c. it's a common code. * add invalidate_dcache_range in fixed order. It will have salt invalid issue if we do not add it in order * add display for pico-7d. Change-Id: I6f8a4876c2f8bbd098034d1e3f53033109300bca Signed-off-by: zhang sanshan <sanshan.zhang@nxp.com>
* MA-9409-1 enable avb on android things.zhang sanshan2017-07-10-0/+8
| | | | | | | | | Fix issue for API changed from v2017. porting below patch from v2016. commit 44834fd12f60a090e3d10ab6f84a75460894d49d Change-Id: Ifaf0b86dd29648f9150646f00f54502676df9013 Signed-off-by: zhang sanshan <sanshan.zhang@nxp.com>
* MA-9375 [Android IMX] uboot: enable BCB and bootctrlzhang sanshan2017-06-21-139/+1
| | | | | | | | | * Add API to read\write MISC partition. * get the boot mode from BCB command when boot up. * get the boot up tactics from bootctrl. Change-Id: Icbba6340e10983dddc1b04804ecc012a3a3c57d0 Signed-off-by: zhang sanshan <sanshan.zhang@nxp.com>
* MLK-13723 imx7d: restore epdc QoS setting after exit the lpsr modeRobby Cai2017-06-20-0/+5
| | | | | | | | | | without this patch, the QoS setting will be lost after exit LPSR mode. The patch moves the QoS setting into DDR setting group (in plugin mode), thus when exit LPSR mode, QoS setting will be restored as well as DDR setting. Signed-off-by: Robby Cai <robby.cai@nxp.com> (cherry picked from commit 0b217456375bace3fbe9a72c7e92a46dc1907277) (cherry picked from commit 75790929c674eea2f867b86a7734127d4cd45dfc)
* MLK-15086 arm: Add firmware_image section to objcopy flagsYe Li2017-06-20-0/+4
| | | | | | | | | The u-boot limits the needed sections in .bin by set -j parameter in objcopy. Need to add the firmware_image section for M4 image. Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> (cherry picked from commit 709839a52af39f1b4640ae3c72475fc01b1b37d5)
* MLK-14994 mx7ulp: Update M4 image header version checkYe Li2017-06-20-1/+1
| | | | | | | | | The latest M4 image uses the version 0x41 not 0x40, have to update it when checking M4 image. Otherwise M4 image won't be loaded. Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> (cherry picked from commit 4f421455c850226b9acec9a43b3997995929872e)
* MLK-15044 DTS: mx6ul/ullevk: Add OTG ID pin muxYe Li2017-06-12-0/+32
| | | | | | | | | The OTG ID pin mux setting is missed in DTS, so the OTG can't work as host mode. Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> (cherry picked from commit b23324508acf2fcda3531bce17055548758c49f8)
* MLK-14945 HAB: Check IVT DCD pointer before authenticating imageYe Li2017-05-22-0/+11
| | | | | | | | | | | | To avoid security leak, check the IVT DCD pointer before authenticating the kernel image. If the pointer is not 0, set back it to 0 and give a warning like the log below. Authenticate image from DDR location 0x80800000... Warning, DCD pointer must be 0 Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit 083daef8d9206d53fb4fa9807f37b8ff5dc319c7)
* MLK-14890 i2c: Enable I2C force idle busYe Li2017-05-15-82/+633
| | | | | | | | | | | This patch enables the I2C force idle bus for all i.MX6 and i.MX7 boards to avoid i2c bus problem during reboot. To use it, we must add some i2c properties in DTB file and the GPIO pinctrl for i2c. For mx6qsabreauto, mx6slevk, mx6sxsabresd and mx6sxscm, these boards call the setup_i2c. To remove conflict, change to use "setup_i2c" only for non-DM i2c driver. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14877 DTB: mx6sllevk: Fix usdhc2 property issueYe Li2017-05-11-1/+1
| | | | | | | | For eMMC, should using "non-removable" property, not "no-removable", this cause USDHC driver has problem in get_cd, then switching to eMMC will always show no card present. Signed-off-by: Ye Li <ye.li@nxp.com>
* ARM: fixed relocation using proper alignmentManfred Schlaegl2017-05-11-1/+1
| | | | | | | | | | | | | | | | | | | | | | | Using u-boot-2017.05 on i.MX6UL we ran into following problem: Initially U-Boot could be started normally. If we added one random command in configuration, the newly generated image hung at startup (last output was DRAM: 256 MiB). We tracked this down to a data abort within relocation (relocated_code). relocated_code in arch/arm/lib/relocate.S copies 8 bytes per loop iteration until the source pointer is equal to __image_copy_end. In a good case __image_copy_end was aligned to 8 bytes, so the loop stopped as suggested, but in an errornous case __image_copy_end was not aligned to 8 bytes, so the loop ran out of bounds and caused a data abort exception. This patches solves the issue by aligning __image_copy_end to 8 byte using the linker script related to arm. From Community: http://patchwork.ozlabs.org/patch/760592/ Signed-off-by: Peng Fan <peng.fan@nxp.com>
* MLK-14792 mx6ull: Disable WDOG3 after initYe Li2017-05-10-1/+1
| | | | | | | Need to power down WDOG3 for mx6ull, otherwise the kernel will reboot once the iomux for WDOG_ANY pin is configured. This is missed in community u-boot. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14839-2 imx: clean up print info for thermal and reset causeYe Li2017-05-09-3/+4
| | | | | | | Clean up the print info, so that the reset cause print can display in a new line. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14839-1 mx6: Fix wrong CPU frequencyYe Li2017-05-09-1/+1
| | | | | | Fix incorrect value for 696MHz CPU frequency on i.MX6UL. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14775 mx7dsabresd: Disable USDHC2 in device treeYe Li2017-05-08-1/+1
| | | | | | | | | | | The USDHC2 is connecting to BT/WIFI chip on SDB board, this controller is enabled in device tree as SDIO, but USDHC driver in u-boot will use it as SDHC. So totally 3 USDHC devices will be created, and cause run time MMC environments go wrong because it only supports USDHC1 and USDHC3. So disable the unused USDHC2 controller in u-boot device tree. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14831 mx6: Fix wrong bmode value used for usb bootYe Li2017-05-08-1/+1
| | | | | | | Wrong bmode value is used in community u-boot for usb reboot. And cause it failed. Fix this by using a reserved bootcfg value. Signed-off-by: Ye Li <ye.li@nxp.com>
* MXSCM-292-3 mx6sxscm: add dts files for EVB boardJuan Gutierrez2017-04-28-1/+1185
| | | | | | | Copy the dts files from kernel for MX6SXSCM EVB board for preparing enabling the OF_CONTROL. Signed-off-by: Juan Gutierrez <juan.gutierrez@nxp.com>
* MXSCM-292-2 mx6sxscm: convert to enable OF_CONTROL and DM driversJuan Gutierrez2017-04-28-0/+9
| | | | | | | | | | | | | Update mx6sxscm boards code and build configurations to enable OF_CONTROL and DM drivers. 1. Update GPIO codes for adding gpio request 2. Update PMIC and LDO by-pass codes for DM PMIC 3. Add lpddr2 512MB size and eMMC options tolocal Kconfig 4. Update license with NXP 2017 5. Add defconfigs for EVB boards Signed-off-by: Juan Gutierrez <juan.gutierrez@nxp.com>
* MXSCM-290-3 mx6dqscm: add dts files for qwks boardsJuan Gutierrez2017-04-28-1/+1057
| | | | | | | Copy the dts files from kernel for qwks boards for preparing enabling the OF_CONTROL. Signed-off-by: Juan Gutierrez <juan.gutierrez@nxp.com>
* MXSCM-290-2 mx6dqscm: convert to enable OF_CONTROL and DM driversJuan Gutierrez2017-04-28-0/+8
| | | | | | | | | | | | | | | Update mx6dqscm boards code and build configurations to enable OF_CONTROL and DM drivers. 1. Update GPIO codes for adding gpio request 2. Enable USB DM driver 3. Update PMIC and LDO by-pass codes for DM PMIC 4. Add spinor boot support 5. Add lpddr2 modes, sizes and boards on local Kconfig 6. Update license with NXP 2017 7. Add defconfigs for qwks boards Signed-off-by: Juan Gutierrez <juan.gutierrez@nxp.com>
* MLK-14693 mx7ulp: Change PLL rate calculation to avoid div 0Ye Li2017-04-14-2/+8
| | | | | | | | | | | | | The new ROM patch will set DENOM and NUM of APLL and SPLL to 0 to workaround PLL issue. When DENOM is 0, the PLL rate calculation will divide 0 and raise a signal. raise: Signal # 8 caught To avoid such problem, we change our calculation. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit f28cf489e1b3864bac6bae4944d8a73bab30ec32)
* MLK-14689 mx7ulp: Workaround APLL PFD2 to 345.6MhzYe Li2017-04-14-2/+2
| | | | | | | | | | The GPU uses APLL PFD2 as its clock parent (483.84Mhz) with divider set to 1. This frequecy is out of ULP A0 spec. The MAX rate for GPU is 350Mhz. So we simply configure the APLL PFD2 to 345.6Mhz (FRAC=28) to workaround the problem. The correct fix should let GPU handle the clock rate in kernel. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit e931d534fd68e0e639082766de17a20e705fd908)
* MLK-14445-12 mx7ulp_evk: Fix dts building for eMMCYe Li2017-04-06-0/+1
| | | | | | Missed to add eMMC dts file to Makefile Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-13499 imx6sll: add epdc splash screen supportRobby Cai2017-04-06-1/+3
| | | | | | | | | add splash screen feature for epdc. it's tested on imx6sll arm2 board and evk board. Signed-off-by: Robby Cai <robby.cai@nxp.com> (cherry picked from commit c85c6f2a0f08dfc6c2859fe969b2021ab32b9370) Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14605 mx7ulp: Modify the lpi2c seq numberYe Li2017-04-05-4/+4
| | | | | | | | Change the i2c alias seq number to align with device index. So in lpi2c driver we don't need to add 4 to get the device index. This codes may not valid on other platforms. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14506-2 HAB: Disable CAAM driver for SoC using DCPYe Li2017-04-05-1/+1
| | | | | | | The MX6SL, SLL and ULL have DCP to replace CAAM in SoC. We have to disable the CAAM driver for them. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14483 mx7ulp: Fix SPLL/APLL clock rate calculation issueYe Li2017-04-05-2/+6
| | | | | | | | The num/denom is a float value, but in the calculation it is convert to integer 0, and cause the result wrong. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit 4a8f51499ca098637e9ee2036066374d34458865)
* MLK-14417 imx: Enable ACTLR.SMP bit for all i.MX cortex-a7 platformsYe Li2017-04-05-7/+40
| | | | | | | | | | | | According to the Cortex-A7 TRM, for ACTLR.SMP bit "You must ensure this bit is set to 1 before the caches and MMU are enabled, or any cache and TLB maintenance operations are performed". ROM sets this bit in normal boot flow, but when in serial download mode, it is not set. Here we add it in u-boot as a common flow for all i.MX cortex-a7 platforms, including mx7d, mx6ul/ull and mx7ulp. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit 14990af03450f3e1898135c86fd8b93328007617)
* MA-9213 imx: mx7ulp-evk: Add android supportSanshan Zhang2017-04-05-0/+45
| | | | | | | | | | | Add android features on i.MX7ULP EVK board. Implement the code to get boot device and the serial number on mx7ulp. TODO: will add the code which check misc partition after porting BCB. Change-Id: I9d06fecba303fa4dfdcaf73da1b6246444697bba Signed-off-by: Sanshan Zhang <sanshan.zhang@nxp.com> (cherry picked from commit 4c60cba3a017b921aebb84dd1268c898e549c99a) Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-12527-2 android: Add FSL android fastboot supportYe Li2017-04-05-0/+175
| | | | | | | | | | | | | | | | | | | | | | Integrate the FSL android fastboot features into community's fastboot. 1. Use USB gadget g_dnl driver 2. Integrate the FSL SD/SATA/NAND flash operations, since the GPT and EFI partitions are not support by i.MX. 3. Add FDT support to community's android image. 4. Add a new boot command "boota" for android image boot. The boota implements to load ramdisk and fdt to their loading addresses specified in boot.img header, while bootm won't do it for android image. 5. Support the authentication of boot.img at the "load_addr" for both SD and NAND. 6. We use new configuration CONFIG_FSL_FASTBOOT for Freescale's fastboot with relevant header file "fsl_fastboot.h". While disabling the configuration, the community fastboot is used. 7. Overwrite the cmdline in boot.img by using bootargs saved in local environment. 8. Add recovery and reboot-bootloader support. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit 23d63ff185929fff5e392efc853d69b606ba081a)
* MLK-12527-1 mxc_keyb: Add MXC keyboard driverYe Li2017-04-05-0/+38
| | | | | | | | | | | | | | | The i.MX6SL EVK needs this driver in android fastboot support. Add this driver to u-boot. To use the driver, user must define: CONFIG_MXC_KPD Enable the driver CONFIG_MXC_KEYMAPPING Key mapping matrix CONFIG_MXC_KPD_COLMAX The column size of key mapping matrix CONFIG_MXC_KPD_ROWMAX The row size of the key mapping matrix Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit 5096e572667ff41217deb4ba9b1bd15e93fa6b59)
* MLK-14497 mx6/mx7: DTS: Update dtsi file to add usb aliasYe Li2017-04-05-0/+7
| | | | | | | | After changed to USB DM driver, the framework uses the seq to find usb device when registering a gadget driver. We have to add usb0 alias in all i.MX6 and i.MX7 dtsi, otherwise the gadget driver register will fail. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14484-3 mx7ulp_arm2: Convert to use OF_CONTROLYe Li2017-04-05-1/+139
| | | | | | | | | | Add the 10x10 ARM2 and 14x14 ARM2 DTS files. Also convert the board codes to use OF_CONTROL and DM drivers. Since the DTS files only have UART and SD1 supported. So we only enable the DM for these two modules. QSPI and USB are still kept in non-DM fashion. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14484-2 mx7ulp_arm2: Add 10x10 and 14x14 ARM2 codesYe Li2017-04-05-0/+9
| | | | | | | | | | | | | Copy the mx7ulp ARM2 codes from v2016.03 as the base for using OF_CONTROL and DM drivers. The 14x14 ARM2 LPDDR3 script is v1.5: - IMX7ULP1_LPDDR3_320MHz_512MB_32bit_V1.5.inc The 10x10 ARM2 LPDDR2 script is v1.1: - IMX7ULP1_LPDDR2_320MHz_1GB_32bit_V1.1.inc Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14445-9 mx7ulp_evk: Add eMMC reworked board supportYe Li2017-04-05-0/+18
| | | | | | | | | Add build configuration and DTS file to enable eMMC for eMMC reworked EVK board. Because the eMMC DTS file has QSPI node disabled, so we change to use non-DM QSPI driver. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14445-7 DTS: mx7ulp: Add PTA and PTB two GPIO banksYe Li2017-04-05-4/+22
| | | | | | | | | | | | | | | | PTA and PTB banks are at M4 domain, but some boards like ARM2 use them for controlling A7 domain modules. So we may need to support them in GPIO driver. In the imx_rgpio2p driver, the non-DM driver supports full 6 GPIO banks, with PTA from index 0. But the DM driver which uses DTB only have 4 GPIO banks, with PTC from index 0. This will cause problem when using GPIO. So this patch add PTA and PTB banks to DTB, and reorder the sequence for gpio with PTA from index 0. So the non-DM driver and DM driver are aligned. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14312 mx7ulp: Fix incorrect DTB modification after using USBYe Li2017-04-05-3/+51
| | | | | | | | | | | | | | u-boot has feature that when booting for mfgtool, the u-boot will modify the DTB to disable SD 1.8v switch. But the judgement for mfgtool boot has a problem, it only checks whether the USB PHY power status is enabled. When a USB device (for example a USB ethernet) is used in u-boot, the power status is also enabled. So the u-boot incorrectly disable the SD 1.8v switch. The patch changes the get_boot_device to use the boot SW info provided by ROM. Only if it is a USB boot, we will start the DTB modification for SD. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit 1fb61cd80af59c39d1ca01d833f566628ba48f32)
* MLK-13929-6 mx7ulp_evk: Enable the MIPI DSI splashscreenYe Li2017-04-05-1/+2
| | | | | | | | Enable and setup board level codes for MIPI DSI splashscreen on EVK board. User needs set env variable"panel=HX8363_WVGA" for displaying. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit 49cb68f5c17e42f9290336e1252ace6ac7d0b5ce)
* MLK-13929-5 mx7ulp: Update clock and SoC functions for videoYe Li2017-04-05-0/+88
| | | | | | | | | Add the clocks functions for enabling LCDIF and DSI clocks. Also add the arch_preboot_os to disable the video before enter into the kernel. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit a783799017a929f9918c9c5981fe3a7a25cd8125)
* MLK-13929-4 mx7ulp: Update registers and memory map for DSI and LCDIFYe Li2017-04-05-4/+14
| | | | | | | | Update the registers base address and LCDIF registers structure for mx7ulp. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit 29a2032fc0c2330718dbab1f96c1201ae5b49b6f)
* MLK-14445-4 mx7ulp: Fix wrong i2c configuration nameYe Li2017-04-05-2/+2
| | | | | | | Wrong I2c driver configuration name is used in codes, so I2c driver is not built. Correct it. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14445-2 mx7ulp_evk: Add QSPI flash supportYe Li2017-04-05-1/+49
| | | | | | | | | Porting the QSPI flash board support from v2016.03, and convert to use DM QSPI driver. Since we need to support QSPI at default in u-boot, change the default DTS file to qspi enabled DTS. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14445-1 mx7ulp: Add CONFIG_MX7ULP to kconfigYe Li2017-04-05-0/+4
| | | | | | | Since many drivers need this CONFIG_MX7ULP to distiguish the settings for i.MX7ULP only. Add this entry to cpu's kconfig. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-13923 mx7ulp: Fix PCC register bits mask and offset issueYe Li2017-04-05-2/+2
| | | | | | | | The offset for FRAC and the mask for PCD are not correct. If we set FRAC, we can't get the right frequency. Fix them to correct value. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit 079db9559c06c5e68ab8f6cd67ec4f5115dd2d59)
* MLK-13899 ARM: mx7ulp: Correct the clock index on imx7ulpBai Ping2017-04-05-1/+2
| | | | | | | | | On i.MX7ULP, value zero is reserved in SCG1 RCCR register, so the val should be decreased by 1 to get the correct clock source index. Signed-off-by: Bai Ping <ping.bai@nxp.com> (cherry picked from commit 7c9a3573ec0191f1e0bea12956346a5eab2db43a)
generated by cgit v1.1 at 2024-07-05 02:15:02 +0000