summaryrefslogtreecommitdiff
path: root/arch
Commit message (Collapse)AuthorAgeLines
* ARM: dts: uniphier: add SD controller node for PH1-LD20Masahiro Yamada2016-04-24-0/+17
| | | | | | | PH1-LD20 does not support 1.8V signaling for SD card; only Default Speed and High Speed (up to 50MHz) with 3.3V signaling is supported. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: uniphier: add PH1-LD20 SoC supportMasahiro Yamada2016-04-24-3/+888
| | | | | | This is the first ARMv8 SoC from Socionext Inc. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: uniphier: rework uniphier_set_fdt_file()Masahiro Yamada2016-04-24-31/+31
| | | | | | | | | | | | The current table look-up for the DTB file name turned out bothersome in terms of maintainability; I ended up adding a new entry every time a new board is supported. There is a common pattern between the DT compatible string and the corresponding file name; drop the vendor prefix "socionext," and prefix it with "uniphier-" and suffix it with ".dtb". Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: uniphier: carry on booting for Unknown boot modeMasahiro Yamada2016-04-24-2/+2
| | | | | | | | No need to stop booting U-Boot even if boot mode is unknown. Setting the "bootmode" environment is only useful for booting Linux Kernel. Anyway, U-Boot has already booted by this point. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: uniphier: add sg_set_iectrl_range()Masahiro Yamada2016-04-24-0/+8
| | | | | | | | For PH1-LD20 or later, per-pin input-enable control is supported, that is, we need to set-up IECTRL registers for a group of pins. This helper function will be useful for a bunch of register settings. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: dts: uniphier: move aliases node up to satisfy fdtgrepMasahiro Yamada2016-04-24-18/+18
| | | | | | | | | | | | | | | | | | | | | | | | | Currently, fdtgrep would not accept uniphier-ph1-ld20-ref.dtb and uniphier-ph1-ld11-ref.dtb unless the aliases node comes the first in the root node. $ make -s uniphier_pxs2_ld6b_defconfig $ make CROSS_COMPILE=arm-linux-gnueabi- DEVICE_TREE=uniphier-ph1-ld20-ref [snip] LDS spl/u-boot-spl.lds LD spl/u-boot-spl OBJCOPY spl/u-boot-spl-nodtb.bin FDTGREP spl/u-boot-spl.dtb Error at 'fdt_find_regions': FDT_ERR_BADLAYOUT /aliases node must come before all other nodes Error: FDT_ERR_BADMAGIC make[1]: *** [spl/u-boot-spl.dtb] Error 1 make: *** [spl/u-boot-spl] Error 2 This commit moves the aliases node as the error message from the fdtgrep tool suggests, although this requirement does not sound reasonable to me. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: dts: uniphier: use Ref Daughter board on PH1-LD20 Ref boardMasahiro Yamada2016-04-24-0/+1
| | | | | | | This makes the EEPROM device on the Reference Daughter board available. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: uniphier: avoid unaligned access to DT on 64bit SoCMasahiro Yamada2016-04-24-6/+4
| | | | | | | Because DT properties are 4-byte aligned, the pointer access *(fdt64_t *) in this code causes unaligned access. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* Merge branch 'master' of git://git.denx.de/u-boot-x86Tom Rini2016-04-22-891/+1
|\
| * x86: Correct typo of Miao Yan's email addressBin Meng2016-04-22-1/+1
| | | | | | | | | | | | Miao Yan's email address is wrong in fw_cfg.c. Fix it. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
| * x86: qemu: Drop our own ACPI implementationBin Meng2016-04-22-890/+0
| | | | | | | | | | | | | | | | | | | | | | | | Our own ACPI implementation (when CONFIG_QEMU_ACPI_TABLE is not set) does not build anymore after x86 has been fully converted to DM PCI. Instead of trying to fix the build errors, given we now have the ACPI support via QEMU's fw_cfg interface, which is a more reliable way to generate correct ACPI tables than by ourselves, hence drop our own ACPI implementation. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | arc/cache: really do flush_dcache_all() even if IOC existsAlexey Brodkin2016-04-21-5/+2
|/ | | | | | | | | | | | flush_dcache_all() is used in the very end of U-Boot self relocation to write back all copied and then patched code and data to their new location in the very end of available memory space. Since that has nothing to do with IO (i.e. no external DMA happens here) IOC won't help here and we need to write back data cache contents manually. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
* Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini2016-04-20-3/+8
|\
| * arm: socfpga: socrates: Add eth0 alias to enable ethernetStefan Roese2016-04-20-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This enables full ethernet usage, including U-Boot to write the board specific MAC address (ethaddr) into the DT blob before passing it to Linux. Without this, the ethaddr is not detected in U-Boot at all, resulting in this error upon bootup: ... Model: EBV SOCrates Net: Error: ethernet@ff702000 address not set. No ethernet found. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Chin Liang See <clsee@altera.com>
| * arm: socfpga: Fix typos in DT files (environmnet -> environment)Stefan Roese2016-04-20-3/+3
| | | | | | | | | | | | | | | | | | | | Fix a small typo in some of the SoCFPGA dts files that has spread via copy-and-paste. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Chin Liang See <clsee@altera.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-mipsTom Rini2016-04-19-2/+3
|\ \
| * | MIPS: bootm: Add fixup of '/memory' node.Purna Chandra Mandal2016-04-19-2/+3
| |/ | | | | | | | | | | | | | | | | | | | | | | MIPS arch do not update 'reg' property of /memory node. As a result Linux bootup will not work unless board.dts file contains right /memory offset-size information or board implements required memory fixup. Fixing by renaming (unused) _arch_fixup_memory_node_ to _arch_fixup_fdt_ in arch/mips/lib/bootm.c inline with ARM arch. Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
* | ARM: always perform per-CPU GIC initStephen Warren2016-04-18-10/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current code in ARMv8's lowlevel_init() skips the per-CPU GIC initialization ifndef CONFIG_ARMV8_MULTIENTRY. However, the per-CPU init should always occur; it's just the one-time init that should only happen on the master. Once this consideration is taken into account, the only difference between the paths when CONFIG_ARMV8_MULTIENTRY is undefined/defined is the use of branch_if_slave. Naively, any unified code would need to invoke this conditionally upon ifdef CONFIG_ARMV8_MULTIENTRY. However, branch_if_slave already checks CONFIG_ARMV8_MULTIENTRY and does nothing if it isn't defined, so we don't even need that ifdef at the call site. Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* | sandbox: Set CONFIG_SYS_CPUTom Rini2016-04-18-0/+3
| | | | | | | | | | | | | | Give a valid value here as well to allow things which want CONFIG_ENV_VARS_UBOOT_CONFIG to build Signed-off-by: Tom Rini <trini@konsulko.com>
* | ARM: AM43xx: Fix BOOT_DEVICE_USB IDLokesh Vutla2016-04-18-1/+2
| | | | | | | | | | | | | | | | | | commit 62c5674ea136a ("omap: SPL boot devices cleanup and completion") cleans up the boot device ids for amx3xx soc. But mistakenly updates wrong device IDs for AM43xx USB. Fixing the same here. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | m68k: fix broken buildman m68kangelo@sysam.it2016-04-18-8/+24
| | | | | | | | | | | | | | | | | | fix 19/48 broken board compilations, due to a now too smal 16-bit relative jump Signed-off-by: Angelo Dureghello <angelo@sysam.it> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Heiko Schocher <hs@denx.de>
* | ARM: dts: dra7xx: am57xx: fix cd-gpios definition as per hardware design and ↵Mugunthan V N2016-04-18-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | dt binding docs As per mmc device tree binding documentation card detect gpio has to be active low signal. When a hardware is designed with active high card detect, gpio polarity has to be changed with cd-inverted dt property. In DRA72x and AM57xx EVMs the card detect gpio is designed as active low gpio. So correcting the dt card detect gpio definition. Also adding card-detect gpio for DRA74x EVM. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | ARM: dts: am43xx: fix cd-gpios definition as per hardware design and dt ↵Mugunthan V N2016-04-18-2/+2
|/ | | | | | | | | | | | | | | binding docs As per mmc device tree binding documentation card detect gpio has to be active low signal. When a hardware is designed with active high card detect, gpio polarity has to be changed with cd-inverted dt property. In AM43xx the card detect gpio is designed as active low gpio. So correcting the dt card detect gpio definition. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* sandbox: Enable many more commandsTom Rini2016-04-15-0/+2
| | | | | | | | | | | | - Set CONFIG_SYS_CACHELINE_SIZE to ARCH_DMA_MINALIGN as that should be good enough. - Make <asm/io.h> include <asm/types.h> like other arches do - Enable many many more drivers in sandbox_defconfig so that we can get more build-time testing on this platform. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* Merge branch 'master' of git://www.denx.de/git/u-boot-microblazeTom Rini2016-04-13-165/+1982
|\
| * gpio: zynq: Move the definitions to driver fileSiva Durga Prasad Paladugu2016-04-13-61/+0
| | | | | | | | | | | | | | | | Move all the gpio definitions to driver file as there is no use of them in other files. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * gpio: zynq: Remove non driver model codeSiva Durga Prasad Paladugu2016-04-13-2/+0
| | | | | | | | | | | | | | | | | | Remove non driver model support as it moved to driver model. Dont need non driver model anymore. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * gpio: Kconfig: Enable Zynq GPIO driver using kconfigSiva Durga Prasad Paladugu2016-04-13-0/+1
| | | | | | | | | | | | | | | | Enable DM GPIO and ZYNQ GPIO using kconfig instead of the board config file. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * ARM64: zynqmp: Add support for zc1751 with DC cardsMichal Simek2016-04-13-1/+572
| | | | | | | | | | | | Support ZynqMP zc1751 with DC cards. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * ARM64: zynqmp: Add support for ZCU102 platformMichal Simek2016-04-13-1/+878
| | | | | | | | | | | | Add new board support. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * ARM64: zynqmp: Do not setup DM_ETH/GPIO/MMC by default for all boardsMichal Simek2016-04-13-2/+0
| | | | | | | | | | | | | | There are mini configurations which need to be fit to OCM that's why these options shouldn't be enabled by default. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * ARM64: zynqmp: Add missing nand node for ep108Punnaiah Choudary Kalluri2016-04-13-0/+35
| | | | | | | | | | | | | | Add missing nand node for ep108. Signed-off-by: Punnaiah Choudary Kalluri <punnaia@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * ARM64: zynqmp: Added OOB timing settings in zynqmp-ep108.dtsAnurag Kumar Vulisha2016-04-13-0/+9
| | | | | | | | | | | | | | | | This patch adds the sata port phy OOB timing values in the sata device-tree node. Signed-off-by: Anurag Kumar Vulisha <anuragku@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * ARM64: zynqmp: Use 64bit size cell format for memory nodeMichal Simek2016-04-13-4/+4
| | | | | | | | | | | | Enable option to support more then 4GB memories in single size block. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * ARM64: zynqmp: Fix DWC3 binding with the kernelMichal Simek2016-04-13-10/+42
| | | | | | | | | | | | Use the same binding as is used in mainline Linux kernel. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * ARM64: zynqmp: Add serdes address space dp driverMichal Simek2016-04-13-1/+2
| | | | | | | | | | | | For run time serdes adjustment. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * ARM64: zynqmp: Align register descriptionMichal Simek2016-04-13-2/+5
| | | | | | | | | | | | Separate register space and put it on more lines. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * ARM64: zynqmp: dp: Add default properties to zynqmp.dtsiHyun Kwon2016-04-13-0/+3
| | | | | | | | | | | | | | Add some default properties to zynqmp.dtsi. Signed-off-by: Hyun Kwon <hyun.kwon@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * ARM64: zynqmp: Use correct addresses in node namesHyun Kwon2016-04-13-2/+2
| | | | | | | | | | | | | | Reflect actual silicon addresses in DT node names. Signed-off-by: Hyun Kwon <hyun.kwon@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * ARM64: zynqmp: Align node address with parent node for dpdmaMichal Simek2016-04-13-6/+6
| | | | | | | | | | | | Use right addresses for channel names Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * ARM64: zynqmp: Add backward compatible string for uartMichal Simek2016-04-13-2/+2
| | | | | | | | | | | | | | | | | | Mainline kernel has no r1p12 compatible string that's why console stops to work with the latest DTS files. Append generic compatible string. Keep in your mind that using this generic compatible string not all uart features will be available. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * ARM64: zynqmp: Fix coding style for pcieMichal Simek2016-04-13-4/+4
| | | | | | | | Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * ARM64: zynqmp: Extend pcie node to support legacy interruptsBharat Kumar Gogada2016-04-13-0/+10
| | | | | | | | | | | | | | | | Modifying device tree node to support legacy interrupts. Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com> Signed-off-by: Ravi Kiran Gummaluri <rgummal@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * ARM64: zynqmp: Add interrupt-controller property to gpio nodesMichal Simek2016-04-13-0/+2
| | | | | | | | | | | | | | | | GPIO driver supports an input interrupt that's why gpio node itself can be labeled as interrupt controller. Reported-by: John Linn <linnj@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * ARM64: zynqmp: Add ddrc node in dtsNaga Sureshkumar Relli2016-04-13-0/+7
| | | | | | | | | | | | | | | | | | This patch adds ddrc memory controller node in dts. size mentioned in dts is 0x30000, because we need to access DDR_QOS INTR registers located at fd090208 from this driver. Signed-off-by: Naga Sureshkumar Relli <nagasure@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * ARM64: zynqmp: Added clocks to DTVNSL Durga2016-04-13-0/+8
| | | | | | | | | | | | | | | | | | ZynqMP DMA's main clock and apb clock are added in zynqmp DT. Signed-off-by: VNSL Durga <vnsldurg@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Punnaiah Choudary Kalluri <punnaia@xilinx.com>
| * ARM64: zynqmp: Add CCI-400 nodeMichal Simek2016-04-13-0/+19
| | | | | | | | | | | | Add CCI-400 node to DTSI. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * ARM64: zynqmp: Add missing interrupt-parent to PMU nodeMichal Simek2016-04-13-0/+1
| | | | | | | | | | | | | | | | | | ZynqMP is not using global interrupt-parent setting that's why it has to be listed in every node separately. PMU node missed it and this patch is adding it. Reported-by: John Linn <John.Linn@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * ARM64: zynqmp: DT: Add power domainsSoren Brinkmann2016-04-13-0/+210
| | | | | | | | | | | | | | | | | | | | Add power-domains to the DT and attach devices to them. The power-domains are all logical domains as understood by firmware. Each PD is identified by a unique identifier that the platform firmware understands. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * ARM64: zynqmp: Added broken-tuning property to SD, eMMC nodesP L Sai Krishna2016-04-13-0/+2
| | | | | | | | | | | | | | | | This patch adds broken-tuning property to SD and eMMC nodes. Signed-off-by: P L Sai Krishna <lakshmis@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
generated by cgit v1.1 at 2024-07-16 04:54:32 +0000