summaryrefslogtreecommitdiff
path: root/arch
Commit message (Expand)AuthorAgeLines
* MLK-12068 imx: mx6ul/sx: fix mmdc_ch0 clk calculationPeng Fan2015-12-23-3/+57
* MLK-12066 imx: mx7: default enable MDIO open drainPeng Fan2015-12-23-0/+22
* MLK-12030: imx: mx7d: fix the temperature checking for TO1.1Peng Fan2015-12-17-0/+2
* MLK-11946 arm: config: disable pic when compiling codePeng Fan2015-12-03-0/+1
* MLK-11784 imx: mx7: uboot plugin change for mfgtoolYe.Li2015-11-02-0/+19
* MLK-11553 imx: mx7 fix typo for showclocksPeng Fan2015-09-15-2/+2
* MLK-11528 imx: mx6ul check fuse before init beePeng Fan2015-09-10-1/+11
* MLK-11505 imx: mx6ul: Disable the LCDIF before system resetYe.Li2015-09-08-0/+9
* MLK-11408-2 imx: mx7d: Isolate 26 IP resources to domain 0 for A coreYe.Li2015-08-25-0/+51
* MLK-11408-1 imx: mx7d: Add mx7d RDC driver supportYe.Li2015-08-25-0/+190
* MLK-10957: ARM: mx6qp: do not turn off PURobin Gong2015-07-31-1/+2
* MLK-10932-2 ARM: imx7: imx-regs: add disconnect_from_pc APIPeter Chen2015-07-14-1/+2
* MLK-10932-1 ARM: imx6: imx-regs: add disconnect_from_pc APIPeter Chen2015-07-14-1/+2
* MLK-11228-2 android: Add fastboot command "reboot-bootloader" supportYe.Li2015-07-13-0/+12
* MLK-11228-1 android: Integrate community fastboot with FSL i.MX fastbootYe.Li2015-07-13-79/+10
* MLK-11216-1 imx:mx7d_12x12_ddr3_arm2 add missed Kconfig filesPeng Fan2015-07-03-0/+5
* MLK-11201 mx7: clock: Fix PLL divider for the 100MHz caseFabio Estevam2015-06-29-1/+1
* MLK-11159-2 Revert "MLK-11028 imx: mx6qp change L2 prefetch offset to 0"Robby Cai2015-06-24-1/+1
* MLK-11135-2 imx: mx6ul: Add MX6UL LPDDR2 ARM2 board supportYe.Li2015-06-19-0/+5
* MLK-11101 imx: mx6: Move the set_wdog_reset out of CONFIG_LDO_BYPASS_CHECKYe.Li2015-06-12-22/+22
* MLK-11028 imx: mx6qp change L2 prefetch offset to 0Peng Fan2015-06-12-1/+1
* MLK-11064 imx: mx6qp: Adjust AQos settings for peripheralsYe.Li2015-06-08-0/+3
* MLK-11050 ARM: imx6: configure the PMIC_STBY_REQ pin as open drainBai Ping2015-06-05-0/+9
* MLK-11008 imx: HAB: Fix secure boot configuration and build issueYe.Li2015-06-01-1/+1
* MLK-10981 mxc: ocotp fix hole in shadow registersPeng Fan2015-05-29-1/+2
* MLK-10972-1 imx: mx7d Add SION bit for i2c pin muxPeng Fan2015-05-26-28/+28
* MLK-10958 imx: mx6ul support Bus Encryption EnginePeng Fan2015-05-25-1/+507
* MLK-10956 imx: mx6ul: Change BSP name and dtb name for 14x14 packageYe.Li2015-05-25-6/+6
* MLK-10546-2 imx: mx7 implement reset_miscPeng Fan2015-05-22-0/+8
* MLK-10936 imx: mx7d: Change to use bootrom_sw_info for getting boot deviceimx_3.14.38_6ul_engrYe.Li2015-05-20-20/+31
* MLK-10839: arm: imx: mx7d 19x19 lpddr3 arm2 board supportAdrian Alonso2015-05-13-0/+5
* MLK-10884 imx: MX6SX: Fix IOMUXC GPR registers access issueYe.Li2015-05-13-2/+2
* MLK-10870 imx: mx7d: Implement to get board serial numberYe.Li2015-05-11-1/+7
* MLK-10829-1 imx:mx6sx correct i2c and video clock settingsPeng Fan2015-05-06-13/+3
* MLK-10817 imx:mx6ul_ddr3_arm2 add mx6ul ddr3 arm2 board supportPeng Fan2015-05-05-0/+5
* MLK-10821 imx: mx6ulevk: Add board support for mx6ulevkYe.Li2015-05-05-0/+5
* MLK-10812-3 imx:mx6ul PAD_CTL_SPEED_LOW for mx6ulPeng Fan2015-05-05-1/+1
* MLK-10812-2 imx:mx6ul add clock supportPeng Fan2015-05-05-61/+421
* MLK-10812-1 imx:mx6 add i2c4 supportPeng Fan2015-05-05-6/+23
* MLK-10808-5 imx: mx6ul: Update soc relevant settingsYe.Li2015-05-05-9/+25
* MLK-10808-4 imx: Move system counter driver to imx-commonYe.Li2015-05-04-9/+18
* MLK-10808-3 imx: mx6ul: Update imx registers head fileYe.Li2015-05-04-33/+114
* MLK-10808-2 imx: mx6ul: Add pins IOMUX head fileYe.Li2015-05-04-0/+1068
* MLK-10808-1 imx: mx6ul: Add i.MX6UL CPU typeYe.Li2015-05-04-2/+5
* MLK-10774-52 nand: mxs correct MXS_DMA_ALIGNMENTPeng Fan2015-04-29-1/+1
* MLK-10708 imx:mx6qp Update Saturation THR for PRExPeng Fan2015-04-29-4/+4
* MLK-10702 imx: mx7d: clock: correct fec MDC root clockFugang Duan2015-04-29-1/+1
* MLK-10774-48 imx: mx7 update hab_caam_clock_enablePeng Fan2015-04-29-11/+8
* ENGR00329484-2 ARM:MX6: Clear Align bit in SCTLRPeng Fan2015-04-29-0/+3
* MLK-10674-2 imx: mx6qp settings for PREPeng Fan2015-04-29-0/+38
generated by cgit v1.1 at 2024-11-09 05:24:41 +0000