summaryrefslogtreecommitdiff
path: root/arch
Commit message (Collapse)AuthorAgeLines
* arm: pxa: introducing cpuinfo display for marvell pxa270mMarcel Ziswiler2015-03-05-2/+15
| | | | | | | | | | | | | | | According to table 2-3 on page 87 of Marvell's latest PXA270 Specification Update Rev. I from 2010.04.19 [1] there exists a breed of chips with a new CPU ID for PXA270M A1 stepping which our latest Colibri PXA270 V2.4A modules actually have assembled. This patch helps in correctly identifying those chips upon boot as well which then looks as follows: CPU: Marvell PXA27xM rev. A1 [1] http://www.marvell.com/application-processors/pxa-family/assets/pxa_27x_spec_update.pdf Acked-by: Marek Vasut <marex@denx.de>
* Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2015-03-05-2/+224
|\
| * mx5: fix get_reset_causeStefano Babic2015-03-05-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | commit d9f43c8f5c1d7ed27c99a06be85a4bb64b2c73fb sets get_reset_cause() as static, but this conflicts with mx5 where its prototype is in sys_proto.h. Drop it from sys_proto.h and drop print_cpuinfo from mx53_loco, factorizing the call for this board. Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Jason Liu <jason.hui@linaro.org>
| * imx6: Added DEK blob generator commandRaul Cardenas2015-03-02-0/+113
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Freescale's SEC block has built-in Data Encryption Key(DEK) Blob Protocol which provides a method for protecting a DEK for non-secure memory storage. SEC block protects data in a data structure called a Secret Key Blob, which provides both confidentiality and integrity protection. Every time the blob encapsulation is executed, a AES-256 key is randomly generated to encrypt the DEK. This key is encrypted with the OTP Secret key from SoC. The resulting blob consists of the encrypted AES-256 key, the encrypted DEK, and a 16-bit MAC. During decapsulation, the reverse process is performed to get back the original DEK. A caveat to the blob decapsulation process, is that the DEK is decrypted in secure-memory and can only be read by FSL SEC HW. The DEK is used to decrypt data during encrypted boot. Commands added -------------- dek_blob - encapsulating DEK as a cryptgraphic blob Commands Syntax --------------- dek_blob src dst len Encapsulate and create blob of a len-bits DEK at address src and store the result at address dst. Signed-off-by: Raul Cardenas <Ulises.Cardenas@freescale.com> Signed-off-by: Nitin Garg <nitin.garg@freescale.com> Signed-off-by: Ulises Cardenas <ulises.cardenas@freescale.com> Signed-off-by: Ulises Cardenas-B45798 <Ulises.Cardenas@freescale.com>
| * mx35: Fix boot hang by avoiding vector relocationFabio Estevam2015-03-02-0/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 3ff46cc42b9d73d0 ("arm: relocate the exception vectors") mx35 does not boot anymore. Add a specific relocate_vectors macro that skips the vector relocation, as the i.MX35 SoC does not provide RAM at the high vectors address (0xFFFF0000), and (0x00000000) maps to ROM. This allows mx35 to boot again. Cc: Sebastian Priebe <sebastian.priebe@cadcon.de> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Tested-by: Stefano Babic <sbabic@denx.de>
| * mx31: Fix boot hang by avoiding vector relocationFabio Estevam2015-03-02-0/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 3ff46cc42b9d73d0 ("arm: relocate the exception vectors") mx31 does not boot anymore. Add a specific relocate_vectors macro that skips the vector relocation, as the i.MX31 SoC does not provide RAM at the high vectors address (0xFFFF0000), and (0x00000000) maps to ROM. This allows mx31 to boot again. Cc: Anatolij Gustschin <agust@denx.de> Cc: Magnus Lilja <lilja.magnus@gmail.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| * Merge branch 'master' of git://git.denx.de/u-bootStefano Babic2015-03-02-4824/+3677
| |\
| * | warp: Add initial WaRP Board supportOtavio Salvador2015-02-23-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The WaRP Board is a Wearable Reference Plaform. The board features: - Freescale i.MX6 SoloLite processor with 512MB of RAM - Freescale FXOS8700CQ 6-axis Xtrinsic sensor - Freescale Kinetis KL16 MCU - Freescale Xtrinsic MMA955xL intelligent motion sensing platform The board implements a hybrid architecture to address the evolving needs of the wearables market. The platform consists of a main board and an example daughtercard with the ability to add additional daughtercards for different usage models. For more information about the project, visit: http://www.warpboard.org/ Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
| * | imx: mx6sl: Extend USDHC SD2 pins to support 8-wire useOtavio Salvador2015-02-23-0/+5
| | | | | | | | | | | | | | | | | | This adds the DATA[4-7] and RST pin definitions. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
| * | imx:mx6sl add I2c pad settingsPeng Fan2015-02-23-0/+5
| | | | | | | | | | | | | | | | | | A few pad settings are I2C1 Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
| * | ARM: i.MX: provide access to reset cause through get_imx_reset_cause()Eric Nelson2015-02-17-1/+11
| | | | | | | | | | | | Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
| * | ARM: imx6 Add WDOG3 for i.MX6SXPeng Fan2015-02-17-0/+5
| | | | | | | | | | | | | | | | | | | | | There are three wdogs for i.MX 6SoloX. Add wdog3 support in function imx_set_wdog_powerdown. Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
| * | ARM: imx6: disable bandgap self-bias after bootPeng Fan2015-02-17-0/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The self-bias circuit is used by the bandgap during startup. Once the bandgap has stabilized, the self-bias circuit should be disabled for best noise performance of analog blocks. Also this bit should be disabled before the chip enters STOP mode or when ever the regular bandgap is disabled. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Signed-off-by: Ranjani Vaidyanathan <Ranjani.Vaidyanathan@freescale.com>
* | | ti: armv7: Move SPL SDRAM init to the right place, drop unused CONFIG_SPL_STACKSimon Glass2015-03-04-9/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently in some cases SDRAM init requires global_data to be available and soon this will not be available prior to board_init_f(). Adjust the code paths in these cases to be correct. In some cases we had the SPL stack be in DDR as we might have large stacks (due to Falcon Mode + Environment). In these cases switch to CONFIG_SPL_STACK_R. In other cases we had simply been setting CONFIG_SPL_STACK into SRAM. In these cases we no longer need to (CONFIG_SYS_INIT_SP_ADDR is used and is also in SRAM) so drop those lines. Signed-off-by: Simon Glass <sjg@chromium.org> Tested on Beagleboard, Beagleboard xM Tested-by: Matt Porter <mporter@konsulko.com> Tested on Beaglebone Black, AM43xx GP EVM, OMAP5 uEVM, OMAP4 Pandaboard Tested-by: Tom Rini <trini@konsulko.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | | arm: spl: Allow board_init_r() to run with a larger stackSimon Glass2015-03-04-3/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At present SPL uses a single stack, either CONFIG_SPL_STACK or CONFIG_SYS_INIT_SP_ADDR. Since some SPL features (such as MMC and environment) require a lot of stack, some boards set CONFIG_SPL_STACK to point into SDRAM. They then set up SDRAM very early, before board_init_f(), so that the larger stack can be used. This is an abuse of lowlevel_init(). That function should only be used for essential start-up code which cannot be delayed. An example of a valid use is when only part of the SPL code is visible/executable, and the SoC must be set up so that board_init_f() can be reached. It should not be used for SDRAM init, console init, etc. Add a CONFIG_SPL_STACK_R option, which allows the stack to be moved to a new address before board_init_r() is called in SPL. The expected SPL flow (for CONFIG_SPL_FRAMEWORK) is documented in the README. Signed-off-by: Simon Glass <sjg@chromium.org> For version 1: Acked-by: Albert ARIBAUD <albert.u.boot@aribaud.net> Reviewed-by: Stefan Roese <sr@denx.de> Tested-by: Bo Shen <voice.shen@atmel.com> Acked-by: Bo Shen <voice.shen@atmel.com> Acked-by: Heiko Schocher <hs@denx.de> Tested-by: Heiko Schocher <hs@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com>
* | | dm: tegra: Enable driver model in SPL and adjust the GPIO driverSimon Glass2015-03-04-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the full driver model GPIO and serial drivers in SPL now that these are supported. Since device tree is not available they will use platform data. Remove the special SPL GPIO function as it is no longer needed. This is all in one commit to maintain bisectability. Signed-off-by: Simon Glass <sjg@chromium.org>
* | | arm: spl: Avoid setting up a duplicate global data structureSimon Glass2015-03-04-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is already set up in crt0.S. We don't need a new structure and don't really want one in the 'data' section of the image, since it will be empty and crt0.S's changes will be ignored. As an interim measure, remove it only if CONFIG_DM is not defined. This allows us to press ahead with driver model in SPL and allow the stragglers to catch up. Signed-off-by: Simon Glass <sjg@chromium.org>
* | | arm: Reduce the scope of lowlevel_init()Simon Glass2015-03-04-2/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This function has grown into something of a monster. Some boards are setting up a console and DRAM here in SPL. This requires global_data which should be set up in one place (crt0.S). There is no need for SPL to use s_init() for anything since board_init_f() is called immediately afterwards. Signed-off-by: Simon Glass <sjg@chromium.org>
* | | Merge branch 'xnext/zynqmp' of git://www.denx.de/git/u-boot-microblazeTom Rini2015-03-02-0/+172
|\ \ \
| * | | arm64: Add Xilinx ZynqMP supportMichal Simek2015-03-02-0/+172
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | Add basic Xilinx ZynqMP arm64 support. Serial and SD is supported. It supports emulation platfrom ep108 and QEMU. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | | armv7.h: Add <asm/io.h>Tom Rini2015-03-02-0/+1
| | | | | | | | | | | | | | | | | | | | | With a389531 we now call readl() from this file so add <asm/io.h> so that we have a prototype for the function. Signed-off-by: Tom Rini <trini@konsulko.com>
* | | Merge branch 'master' of git://git.denx.de/u-boot-samsungTom Rini2015-03-01-35/+479
|\ \ \
| * | | Exynos: Fix L2 cache timings on Exynos5420 and Exynos5800Doug Anderson2015-02-28-95/+77
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It was found that the L2 cache timings that we had before could cause freezes and hangs. We should make things more robust with better timings. Currently the production ChromeOS kernel applies these timings, but it's nice to fixup firmware too (and upstream probably won't take our kernel hacks). This also provides a big cleanup of the L2 cache init code avoiding some duplication. The way things used to work: * low_power_start() was installed by the SPL (both at boot and resume time) and left resident in iRAM for the kernel to use when bringing up additional CPUs. It used configure_l2_ctlr() and configure_l2_actlr() when it detected it was on an A15. This was needed (despite the L2 cache registers being shared among all A15s) because we might have been the first man in after the whole A15 cluster was shutdown. * secondary_cores_configure() was called on at boot time and at resume time. Strangely this called configure_l2_ctlr() but not configure_l2_actlr() which was almost certainly wrong. Given that we'll call both (see next bullet) later in the boot process it didn't matter for normal boot, but I guess this is how L2 cache settings got set on 5420/5800 (but not 5250?) at resume time. * exynos5_set_l2cache_params() was called as part of cache enablement. This should happen at boot time (normally in the SPL except for USB boot where it happens in main U-Boot). Note that the old code wasn't setting ECC/parity in the cache enablement code but we happened to get it anyway because we'd call secondary_cores_configure() at boot time. For resume time we'd get it anyway when the 2nd A15 core came up. Let's make this a whole lot simpler. Now we always set these parameters in the same place for all boots and use the same code for setting up secondary CPUs. Intended net effects of this change (other than cleanup): * Timings go from before: data: 0 cycle setup, 3 cycles (0x2) latency tag: 0 cycle setup, 3 cycles (0x2) latency after: data: 1 cycle setup, 4 cycles (0x3) latency tag: 1 cycle setup, 4 cycles (0x3) latency * L2ACTLR is properly initted on 5420/5800 in all cases. One note is that we're still relying on luck to keep low_power_start() working. The compiler is being nice and not storing anything on the stack. Another note is that on its own this patch won't help to fix cache settings in an RW U-Boot update where we still have the RO SPL. The plan for that is: * Have RW U-Boot re-init the cache right before calling the kernel (after it has turned the L2 cache off). This is why the functions are in a header file instead of lowlevel_init.c. * Have the kernel save the L2 cache settings of the boot CPU and apply them to all other CPUs. We get a little lucky here because the old code was using "|=" to modify the registers and all of the bits that it's setting are also present in the new settings (!). That means that when the 2nd CPU in the A15 cluster comes up it doesn't actually mess up the settings of the 1st CPU in the A15 cluster. An alternative option is to have the kernel write its own low_power_start() code. Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | | Exynos542x: Make A7s boot with thumb-mode U-Boot on warm resetAkshay Saraswat2015-02-28-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On warm reset, all cores jump to the low_power_start function because iRAM data is retained and because while executing iROM code all cores find the jump flag 0x02020028 set. In low_power_start, cores check the reset status and if true they clear the jump flag and jump back to 0x0. The A7 cores do jump to 0x0 but consider following instructions as a Thumb instructions which in turn makes them loop inside the iROM code instead of jumping to power_down_core. This issue is fixed by replacing the "mov pc" instruction with a "bx" instruction which switches state along with the jump to make the execution unit consider the branch target as an ARM instruction. Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | | Exynos542x: Fix secondary core booting for thumbAkshay Saraswat2015-02-28-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When compiled SPL for Thumb secondary cores failed to boot at the kernel boot up. Only one core came up out of 4. This was happening because the code relocated to the address 0x02073000 by the primary core was an ARM asm code which was executed by the secondary cores as if it was a thumb code. This patch fixes the issue of secondary cores considering relocated code as Thumb instructions and not ARM instructions by jumping to the relocated with the help of "bx" ARM instruction. "bx" instruction changes the 5th bit of CPSR which allows execution unit to consider the following instructions as ARM instructions. Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | | Exynos542x: add L2 control register configurationAkshay Saraswat2015-02-28-13/+64
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch does 3 things: 1. Enables ECC by setting 21st bit of L2CTLR. 2. Restore data and tag RAM latencies to 3 cycles because iROM sets 0x3000400 L2CTLR value during switching. 3. Disable clean/evict push to external by setting 3rd bit of L2ACTLR. We need to restore this here due to switching. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | | Exynos542x: cache: Disable clean/evict push to externalAkshay Saraswat2015-02-28-1/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | L2 Auxiliary Control Register provides configuration and control options for the L2 memory system. Bit 3 of L2ACTLR stands for clean/evict push to external. Setting bit 3 disables clean/evict which is what this patch intends to do. Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | | Exynos542x: Add workaround for exynos iROM errataAkshay Saraswat2015-02-28-16/+200
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | iROM logic provides undesired jump address for CPU2. This patch adds a programmable susbstitute for a part of iROM logic which wakes up cores and provides jump addresses. This patch creates a logic to make all secondary cores jump to a particular address which evades the possibility of CPU2 jumping to wrong address and create undesired results. Logic of the workaround: Step-1: iROM code checks value at address 0x2020028. Step-2: If value is 0xc9cfcfcf, it jumps to the address (0x202000+CPUid*4), else, it continues executing normally. Step-3: Primary core puts secondary cores in WFE and store 0xc9cfcfcf in 0x2020028 and jump address (pointer to function low_power_start) in (0x202000+CPUid*4). Step-4: When secondary cores recieve event signal they jump to this address and continue execution. Signed-off-by: Kimoon Kim <kimoon.kim@samsung.com> Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | | Exynos542x: Add workaround for ARM errata 799270Akshay Saraswat2015-02-28-0/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds workaround for the ARM errata 799270 which says "If the L2 cache logic clock is stopped because of L2 inactivity, setting or clearing the ACTLR.SMP bit might not be effective. The bit is modified in the ACTLR, meaning a read of the register returns the updated value. However the logic that uses that bit retains the previous value." Signed-off-by: Kimoon Kim <kimoon.kim@samsung.com> Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | | Exynos542x: Add workaround for ARM errata 798870Akshay Saraswat2015-02-28-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds workaround for ARM errata 798870 which says "If back-to-back speculative cache line fills (fill A and fill B) are issued from the L1 data cache of a CPU to the L2 cache, the second request (fill B) is then cancelled, and the second request would have detected a hazard against a recent write or eviction (write B) to the same cache line as fill B then the L2 logic might deadlock." Signed-off-by: Kimoon Kim <kimoon.kim@samsung.com> Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | | Exynos542x: CPU: Power down all secondary coresAkshay Saraswat2015-02-28-0/+164
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds code to shutdown secondary cores. When U-boot comes up, all secondary cores appear powered on, which is undesirable and causes side effects while initializing these cores in kernel. Secondary core power down happens in following steps: Step-1: After Exynos power-on, primary core starts executing first. Step-2: In iROM code every core has to check 2 flags i.e. addresses 0x02020028 & 0x02020004. Step-3: Initially 0x02020028 is 0 for all cores and 0x02020004 has a jump address for primary core and 0 for all secondary cores. Step-4: Therefore, primary core follows normal iROM execution and jumps to BL1 eventually, whereas all secondary cores enter WFE. Step-5: When primary core comes into function secondary_cores_configure, it puts pointer to function power_down_core into 0x02020004 and provides DSB and SEV for all cores so that they may come out of WFE and jump to power_down_core function. Step-6: And ultimately because of power_down_core all secondary cores shut-down. Signed-off-by: Kimoon Kim <kimoon.kim@samsung.com> Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | | Merge branch 'master' of git://git.denx.de/u-boot-uniphierTom Rini2015-03-01-532/+565
|\ \ \
| * | | ARM: UniPhier: remove SSC_WAY_SIZE and SSC_NUM_ENTRIES macrosMasahiro Yamada2015-03-01-5/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Each way of the system cache has 256 entries for PH1-Pro4 and older SoCs, whereas 512 entries for PH1-Pro5 and newer SoCs. The line size is still 128 byte. Thus, the way size is 32KB/64KB for old/new SoCs. To keep lowlevel_init SoC-independent, set BOOT_RAM_SIZE to the constant value 32KB. It is large enough for temporary RAM and should work for all the SoCs of UniPhier family. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * | | ARM: UniPhier: remove stop_mpll() from PH1-Pro4 PLL initializationMasahiro Yamada2015-03-01-21/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This function was intended for MN2WS0235 (what we call PH1-Pro4TV). On that SoC, MPLL is already running on the power-on reset and it makes sense to stop the PLL at early boot-up. On the other hand, PH1-Pro4(R) does not have SC_MPLLOSCCTL register, so this function has no point. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * | | ARM: UniPhier: consolidate MEMCONF setting codeMasahiro Yamada2015-03-01-141/+116
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This code is duplicated in ph1-ld4/sg_init.c and ph1-pro4/sg_init.c. Merge the same code into a new file, memconf.c. The helper functions no longer have to be placed in the header file. Also, move them into memconf.c. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * | | ARM: UniPhier: support 1CS support card for all the UniPhier SoCsMasahiro Yamada2015-03-01-121/+189
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Two support card variants are used with UniPhier reference boards: - 1 chip select support card (original CPLD) - 3 chip selects support card (ARIMA-compatible CPLD) Currently, the former is only supported on PH1-Pro4, but it can be expanded to PH1-LD4, PH1-sLD8 with a little code change. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * | | ARM: UniPhier: add xHCI device nodes to PH1-Pro4 device treeMasahiro Yamada2015-03-01-6/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Each USB port corresponds to the following IP core: port0: xHCI (0x65a00000) SS+HS port1: xHCI (0x65c00000) HS (SS PHY is not implemented) port2: EHCI (0x5a800100) HS port3: EHCI (0x5a810100) HS Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * | | ARM: UniPhier: enable xHCI and GIO cores for PH1-Pro4Masahiro Yamada2015-03-01-1/+25
| | | | | | | | | | | | | | | | | | | | | | | | This is necessary to use the USB 3.0 host controllers on PH1-Pro4. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * | | ARM: UniPhier: add I/O pin settings for xHCI on PH1-Pro4Masahiro Yamada2015-03-01-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | This is necessary to use the xHCI cores for PH1-Pro4. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * | | ARM: UniPhier: replace "usb-ehci" with "generic-ehci"Masahiro Yamada2015-03-01-16/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | EHCI host controllers have a common register interface. We may wish to implement a generic EHCI driver someday. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * | | ARM: UniPhier: move uniphier_ehci_reset() functionMasahiro Yamada2015-03-01-27/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Because uniphier_ehci_reset() is only called from ehci-uniphier.c, it can be a static function there. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Marek Vasut <marex@denx.de>
| * | | ARM: UniPhier: remove EHCI platform devicesMasahiro Yamada2015-03-01-45/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now UniPhier platform highly depends on Device Tree configuration (CONFIG_OF_CONTROL is select'ed by Kconfig). Since the EHCI is only used on main U-Boot, we can drop platform devices of the EHCI controllers. We still keep UART platform devices because they might be useful for SPL. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Marek Vasut <marex@denx.de>
| * | | ARM: UniPhier: enable STDMAC for EHCIMasahiro Yamada2015-03-01-2/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Deassert the reset signal and provide the clock for STDMAC core. This is necessary for the USB 2.0 host controllers. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * | | ARM: UniPhier: reset NAND core in SPL for non-NAND boot modeMasahiro Yamada2015-03-01-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For all the UniPhier SoCs so far, the reset signal of the NAND core is automatically deasserted after the PLL gets stabled. (The bit 2 of SC_RSTCTRL is default to one.) This causes a fatal problem on the NAND controller of PH1-LD4. For that SoC, the NAND I/O pins are not set up yet at the power-on reset except the NAND boot mode. As a result, the NAND controller begins automatic device scanning with wrong I/O pins and finally hangs up. Actually, U-Boot dies after printing "NAND:" on the console unless the boot mode latch detected the NAND boot mode. To work around this problem, reset the NAND core in SPL for non-NAND boot modes. If CONFIG_NAND_DENALI is enabled, the reset signal is deasserted again in U-Boot proper. At this time, I/O pins have been correctly set up, the device scanning should succeed. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * | | ARM: UniPhier: split clkrst_init() into two functionsMasahiro Yamada2015-03-01-49/+74
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Split the current clkrst_init() into two functions: - early_clkrst_init(): called from SPL Deassert the reset signals of the memory controller and some other basic cores. - clkrst_init(): called from main U-boot Deassert the reset signals that are necessary for the access to peripherals etc. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * | | ARM: UniPhier: rename SC_CLKCTRL_CLK_* to SC_SCLKCTRL_CEN_*Masahiro Yamada2015-03-01-13/+13
| | | | | | | | | | | | | | | | | | | | | | | | Follow the register macros in the LSI specification book. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * | | ARM: UniPhier: fix SBC init codeMasahiro Yamada2015-03-01-25/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now UniPhier SoCs only work with CONFIG_SPL and the function sbc_init() is called from SPL. The conditional #if !defined(CONFIG_SPL_BUILD) has no point any more. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * | | ARM: UniPhier: fix comments in PH1-Pro4 SBC codeMasahiro Yamada2015-03-01-3/+3
| | | | | | | | | | | | | | | | Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * | | ARM: UniPhier: include <mach/*.h> instead of <asm/arch/*.h>Masahiro Yamada2015-03-01-68/+68
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 0e7368c6c426 (kbuild: prepare for moving headers into mach-*/include/mach), we can replace #include <asm/arch/*.h> with <mach/*.h> so we do not need to create the symbolic link during the build. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * | | ARM: UniPhier: move SoC headers to mach-uniphier/include/machMasahiro Yamada2015-03-01-0/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Move arch/arm/include/asm/arch-uniphier/* -> arch/arm/mach-uniphier/include/mach/* Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
generated by cgit v1.1 at 2024-11-01 13:24:59 +0000