summaryrefslogtreecommitdiff
path: root/arch
Commit message (Expand)AuthorAgeLines
* MLK-11101 imx: mx6: Move the set_wdog_reset out of CONFIG_LDO_BYPASS_CHECKYe.Li2015-06-12-22/+22
* MLK-11028 imx: mx6qp change L2 prefetch offset to 0Peng Fan2015-06-12-1/+1
* MLK-11064 imx: mx6qp: Adjust AQos settings for peripheralsYe.Li2015-06-08-0/+3
* MLK-11050 ARM: imx6: configure the PMIC_STBY_REQ pin as open drainBai Ping2015-06-05-0/+9
* MLK-11008 imx: HAB: Fix secure boot configuration and build issueYe.Li2015-06-01-1/+1
* MLK-10981 mxc: ocotp fix hole in shadow registersPeng Fan2015-05-29-1/+2
* MLK-10972-1 imx: mx7d Add SION bit for i2c pin muxPeng Fan2015-05-26-28/+28
* MLK-10958 imx: mx6ul support Bus Encryption EnginePeng Fan2015-05-25-1/+507
* MLK-10956 imx: mx6ul: Change BSP name and dtb name for 14x14 packageYe.Li2015-05-25-6/+6
* MLK-10546-2 imx: mx7 implement reset_miscPeng Fan2015-05-22-0/+8
* MLK-10936 imx: mx7d: Change to use bootrom_sw_info for getting boot deviceimx_3.14.38_6ul_engrYe.Li2015-05-20-20/+31
* MLK-10839: arm: imx: mx7d 19x19 lpddr3 arm2 board supportAdrian Alonso2015-05-13-0/+5
* MLK-10884 imx: MX6SX: Fix IOMUXC GPR registers access issueYe.Li2015-05-13-2/+2
* MLK-10870 imx: mx7d: Implement to get board serial numberYe.Li2015-05-11-1/+7
* MLK-10829-1 imx:mx6sx correct i2c and video clock settingsPeng Fan2015-05-06-13/+3
* MLK-10817 imx:mx6ul_ddr3_arm2 add mx6ul ddr3 arm2 board supportPeng Fan2015-05-05-0/+5
* MLK-10821 imx: mx6ulevk: Add board support for mx6ulevkYe.Li2015-05-05-0/+5
* MLK-10812-3 imx:mx6ul PAD_CTL_SPEED_LOW for mx6ulPeng Fan2015-05-05-1/+1
* MLK-10812-2 imx:mx6ul add clock supportPeng Fan2015-05-05-61/+421
* MLK-10812-1 imx:mx6 add i2c4 supportPeng Fan2015-05-05-6/+23
* MLK-10808-5 imx: mx6ul: Update soc relevant settingsYe.Li2015-05-05-9/+25
* MLK-10808-4 imx: Move system counter driver to imx-commonYe.Li2015-05-04-9/+18
* MLK-10808-3 imx: mx6ul: Update imx registers head fileYe.Li2015-05-04-33/+114
* MLK-10808-2 imx: mx6ul: Add pins IOMUX head fileYe.Li2015-05-04-0/+1068
* MLK-10808-1 imx: mx6ul: Add i.MX6UL CPU typeYe.Li2015-05-04-2/+5
* MLK-10774-52 nand: mxs correct MXS_DMA_ALIGNMENTPeng Fan2015-04-29-1/+1
* MLK-10708 imx:mx6qp Update Saturation THR for PRExPeng Fan2015-04-29-4/+4
* MLK-10702 imx: mx7d: clock: correct fec MDC root clockFugang Duan2015-04-29-1/+1
* MLK-10774-48 imx: mx7 update hab_caam_clock_enablePeng Fan2015-04-29-11/+8
* ENGR00329484-2 ARM:MX6: Clear Align bit in SCTLRPeng Fan2015-04-29-0/+3
* MLK-10674-2 imx: mx6qp settings for PREPeng Fan2015-04-29-0/+38
* MLK-10647 armv7: Fix Dcache disable issue on i.MX7Ye.Li2015-04-29-1/+4
* MLK-10774-46 imx:mx6sx use correct GPR addressPeng Fan2015-04-29-1/+1
* MLK-10774-45 imx:mx6sx add SION for i2c pin muxPeng Fan2015-04-29-20/+20
* MLK-10774-44 imx:mx6 fix is_soc_revPeng Fan2015-04-29-1/+1
* MLK-10597: arm: imx7d: extend iomuxc-lpsr IO pads config optionsAdrian Alonso2015-04-29-4/+39
* MLK-10569 imx7d: call set_epdc_qos unconditionallyRobby Cai2015-04-29-4/+1
* MLK-10590: arm :imx7d: correct iomuxc-lpsr daisy chainAdrian Alonso2015-04-29-3/+3
* MLK-10522-2: arm: imx7d: add iomuxc-lpsr i2c pad settingsAdrian Alonso2015-04-29-1/+4
* MLK-10566: arm :imx7d: fix iomuxc-lpsr daisy chain settingsAdrian Alonso2015-04-29-0/+4
* MLK-10524: iMX6x: Implement workaround for Cortex-A9 errata 845369Nitin Garg2015-04-29-0/+5
* MLK-10513 mx7: HAB: Fix HAB RVT addresses to unified sectionYe.Li2015-04-29-11/+5
* MLK-10503 imx:mx6qp add missed macroPeng Fan2015-04-29-1/+4
* MLK-10499 imx:mx6qp update printed cpu infoPeng Fan2015-04-29-5/+14
* MLK-10496: Check the PL310 version for applying errataNitin Garg2015-04-29-11/+15
* MLK-10492-1 imx: mx7d: Update LCDIF clock settingsYe.Li2015-04-29-7/+54
* MLK-10477-2 imx: mx7d: Add EPDC clock init and base addressYe.Li2015-04-29-0/+34
* MLK-10477-1 imx: mx7d: Add QoS settings for EPDCYe.Li2015-04-29-0/+34
* MLK-10448-5 imx: mx6qp: Enable PRG clock for IPUYe.Li2015-04-29-0/+6
* MLK-10448-4 mx6: hab : Remove the cache issue workaroud in hab for i.MX6QPYe.Li2015-04-29-1/+2