summaryrefslogtreecommitdiff
path: root/arch
Commit message (Collapse)AuthorAgeLines
* build: imx: Fix 'u-boot.imx' build without full OBJTREE referenceOtavio Salvador2013-02-12-2/+2
| | | | | | | | | | | | | | | | | | | When calling 'make u-boot.imx' the build were failing as it were expecting the full path for the file; this regression has been included by commit 71a988a (imximage.cfg: run files through C preprocessor). The direct references for u-boot.imx were replaced by $(obj) as config.mk handles the proper setting of it making it set to $(OBJTREE) when required. The build has been test using: - ./MAKEALL -s mx5 -s mx6 - make u-boot.imx - make O=/tmp/build Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* mx6: Disable Power Down Bit of watchdogFabio Estevam2013-02-12-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On a mx6qsabresd revision C board with rev1.2 mx6q, the system gets resetted and it is not able to reach the Linux prompt. Comparing the watchdog behaviour on a revB versus revC board: - On a mx6qsabresd revB: U-Boot > reset resetting ... U-Boot 2013.01-10524-g432a3aa-dirty (Feb 07 2013 - 13:34:46) CPU: Freescale i.MX6Q rev1.1 at 792 MHz Reset cause: WDOG ... - On a mx6qsabresd revC: U-Boot > reset resetting ... U-Boot 2013.01-10524-g432a3aa-dirty (Feb 07 2013 - 13:34:46) CPU: Freescale i.MX6Q rev1.1 at 792 MHz Reset cause: POR So due to revC POR/watchdog circuitry whenever a watchdog occurs, it causes a POR. Clearing the PDE - Power Down Enable bit of WMCR registers fixes the problem and is also safe for all mx6 boards. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Stefano Babic <sbabic@denx.de>
* mxs: mmc: Allow overriding default card detect implementationMarek Vasut2013-01-28-1/+1
| | | | | | | | | | Some MXS based boards do not implement the card-detect signal. Allow user to specify alternate card-detect implementation. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
* mxs: ssp: Add SSP registers map for MX23Marek Vasut2013-01-28-0/+36
| | | | | | | | | | The MX23 SSP register layout differs from MX28 in certain bits, adjust the register layout accordingly. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
* mxs: dma: Fix APBH DMA driver for MX23Marek Vasut2013-01-28-0/+121
| | | | | | | | | | | The MX23 has less channels for the APBH DMA, sligtly different register layout and some bits in those registers are placed differently. Reflect this in the driver. This patch fixes MMC/DMA issue on MX23. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
* mxs: Use __weak annotation to simplify codeFabio Estevam2013-01-28-7/+4
| | | | | | | Using the __weak annotation can make the code cleaner. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Marek Vasut <marex@denx.de>
* mxs: Boost the memory power supplyMarek Vasut2013-01-28-2/+2
| | | | | | | | | | | The memory power supply on MX23 didn't pump out enough juice into the DRAM chip, thus caused occasional memory corruption. Fix this. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
* imximage.cfg: run files through C preprocessorTroy Kisky2013-01-22-2/+15
| | | | | | | | | | | | The '#' used as comments in the files cause the preprocessor trouble, so change to /* */. The mkimage command which uses this preprocessor output was moved to arch/arm/imx-common/Makefile .gitignore was updated to ignore .cfgtmp files. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
* mxs: Add MX23 quirks into the clock codeOtavio Salvador2013-01-21-11/+32
| | | | | | | | | | The MX23 has different handling of the SSP clock and GPMI NAND clock sources, add necessary quirks into the clock code to properly handle these. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
* mxs: Fix the memory init for MX23Otavio Salvador2013-01-21-15/+78
| | | | | | | | | | The memory init is slightly different on MX23, thus split the memory init for mx23 and mx28 into different functions. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
* mxs: Add function to ungate the power block on MX23Marek Vasut2013-01-21-0/+12
| | | | | | | | | | The power block on MX23 must first be ungated before it can be operated. Add function to MXS power init that ungates it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
* mx23: config: Enable building of u-boot.sb binaryOtavio Salvador2013-01-21-0/+18
| | | | | | | | | For i.MX23 we need to pass imx23 as elftosb param. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
* mx23: SPL: Initialize DDR at 133MHzOtavio Salvador2013-01-21-0/+20
| | | | | | | Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
* mx23: SPL: Add boot mode supportOtavio Salvador2013-01-21-0/+25
| | | | | | | | | This adds the boot mode support for i.MX23 processors. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
* mx23: Add boot mode descriptionOtavio Salvador2013-01-21-0/+12
| | | | | | | Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
* mx23: Add support on print_cpuinfo()Otavio Salvador2013-01-21-1/+19
| | | | | | | | | Add information to identify i.MX23 chips and its known revisions. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
* mx23: ssp: Fix ssp-regs.h for MX23Marek Vasut2013-01-21-0/+2
| | | | | | | | | Disable SSP2 and SSP3 ports on MX23. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
* mx23: Add POWER and CLKCTRL register definitionsMarek Vasut2013-01-21-1/+585
| | | | | | | | | | | Add register definitions for the i.MX23 power control block and clock control block. These are essential for the basic bootstrap of the i.MX23. Also, properly include them in imx-regs.h . Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
* mx23: Add iomux-mx23.hOtavio Salvador2013-01-21-0/+361
| | | | | | | | | This has been copied from Linux source at revision 786f02b719f. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
* mx23: Add register base addressesOtavio Salvador2013-01-21-5/+51
| | | | | | | | | | | This adds the base addresses of i.MX23 and easy the detection of wrong order in board setup, in case no SoC has been set, an error is raised during build. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
* mxs: clock: Use 'mxs' prefix for methodsOtavio Salvador2013-01-21-26/+26
| | | | | | | Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
* mxs: ssp: Pull out the SSP bus to regs conversionMarek Vasut2013-01-21-1/+17
| | | | | | | | | | | | | Create function which converts SSP bus number to SSP register pointer. This functionality is reimplemented multiple times in the code, thus make one common implementation. Moreover, make it a switch(), since the SSP ports are not mapped in such nice linear fashion on MX23, therefore having it a switch will simplify things there. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andy Fleming <afleming@freescale.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
* pxa: Save lr register in relocate_code functionŁukasz Dałek2013-01-14-0/+2
| | | | | | | | | | | When u-boot is compiled for PXA25x processor, pxa/start.S is calling cpu_init_crit by BL instruction. BL is overwriting lr register so relocate_code is going into infinite loop. This patch preservs lr register in r12 before calling cpu_init_crit and after function returns restores it. Signed-off-by: Lukasz Dalek <luk0104@gmail.com> Acked-by: Marek Vasut <marex@denx.de>
* Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'Albert ARIBAUD2013-01-14-84/+12
|\
| * mx31/mx35/mx51/mx53/mx6: add watchdogTroy Kisky2013-01-13-84/+2
| | | | | | | | | | | | | | Use a common watchdog driver for all these cpus. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Stefano Babic <sbabic@denx.de>
| * mx6: Add workaround for ARM errataFabio Estevam2013-01-09-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add workaround for the following ARM errata: 743622 and 751472. The motivation for this change is the following kernel commit 62e4d357a (ARM: 7609/1: disable errata work-arounds which access secure registers), which removes the errata from multiplatform kernel. Since imx has been converted to multiplatform in the kernel, we need to apply such workarounds into the bootloader. Workaround code has been taken from arch/arm/mm/proc-v7.S from 3.7.1 kernel. Explanation of each erratum is provided at "Chip Errata for the i.MX 6Dual/6Quad" document available at: cache.freescale.com/files/32bit/doc/errata/IMX6DQCE.pdf Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* | Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'Albert ARIBAUD2013-01-14-25/+953
|\ \
| * | Exynos: clock: add CLK_DIV_FSYS3 at set_mmc_clkJaehoon Chung2013-01-11-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | Mobile storage is used the CLK_DIV_FSYS3 value. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | Exynos: clock: support get_mmc_clk for exynosJaehoon Chung2013-01-11-0/+103
| | | | | | | | | | | | | | | | | | | | | | | | | | | To get exactly clock value for mmc, support the get_mmc_clk() like set_mmc_clk(). Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | EXYNOS: Add dummy definition to fix compilation dependency on ↵Ajay Kumar2013-01-10-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_EXYNOS_MIPI_DSIM When only DP is used, we need not enable CONFIG_EXYNOS_MIPI_DSIM. But if we do not select CONFIG_EXYNOS_MIPI_DSIM, exynos_fb.c throws error saying exynos_mipi_dsi_init() not defined. So, we add dummy definition for exynos_mipi_dsi_init when CONFIG_EXYNOS_MIPI_DSIM is not defined. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Acked-by: Donghwa Lee <dh09.lee@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | EXYNOS5: Change parent clock of FIMD to MPLLAjay Kumar2013-01-10-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With VPLL as source clock to FIMD, Exynos DP Initializaton was failing sometimes with unstable clock. Changing FIMD source to MPLL resolves this issue. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Acked-by: Donghwa Lee <dh09.lee@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | EXYNOS5: Add support for FIMD and DPAjay Kumar2013-01-10-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add panel_info structure required by LCD driver and DP panel platdata for SMDK5250. Add GPIO configuration for LCD. Enable FIMD and DP support on SMDK5250. DP Panel size: 2560x1600. We use 16BPP resolution to get LCD console. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Acked-by: Simon Glass <sjg@chomium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | EXYNOS5: Add device node for USB.Rajeshwari Shinde2013-01-08-0/+13
| | | | | | | | | | | | | | | | | | | | | This patch adds the device node required for USB Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | EXYNOS5: FDT: Add SPI device node dataRajeshwari Shinde2013-01-08-0/+41
| | | | | | | | | | | | | | | | | | | | | | | | Add SPI device node data for exynos. Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | EXYNOS5: FDT: Add sound device node dataRajeshwari Shinde2013-01-08-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | Add sound device node data for exynos Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | EXYNOS5: FDT : Decode peripheral idRajeshwari Shinde2013-01-08-13/+57
| | | | | | | | | | | | | | | | | | | | | | | | | | | Api is added to decode peripheral id based on the interrupt number of the peripheral. Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | EXYNOS5: FDT: Add I2C device node dataRajeshwari Shinde2013-01-08-0/+64
| | | | | | | | | | | | | | | | | | | | | | | | Add I2C device node data for exynos Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | arm:exynos4:pinmux: Modify the gpio function for mmcPiotr Wilczek2013-01-08-0/+45
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch add pinmux settings for Exynos4 for mmc0 and mmc2 Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> CC: Albert ARIBAUD <albert.u.boot@aribaud.net> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | EXYNOS: EXYNOS4X12: extract Exynos4x12 IPs clock frequencyChander Kashyap2012-12-26-5/+158
| | | | | | | | | | | | | | | | | | | | | Adds functions to extract clock frequency of Exynos4x12 IPs. Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | exynos5: Add DT based driver for SMC911X ethernetHatim RV2012-12-26-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add device tree based ethernet driver for SMC911X controller on SMDK5250 boards. Signed-off-by: Hatim Ali <hatim.rv@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | EXYNOS5: FDT: add initial dts file for EXYNOS5250, SMDK5250Hatim RV2012-12-26-0/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds initial dts file for EXYNOS5250 SoC. This dts file currently include only ethernet devices and properties. More devices to be added in subsequent patches. Also add the dts file for SMDK5250 board which uses the EXYNOS5250 dts file. Signed-off-by: Hatim Ali <hatim.rv@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | EXYNOS: EXYNOS4X12: Add gpio structure for EXYNOS4X12Chander Kashyap2012-12-26-0/+85
| | | | | | | | | | | | | | | | | | | | | This patch adds gpio structure for Exynos4x12. Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | EXYNOS: EXYNOS4X12: Add clock structure for EXYNOS4X12Chander Kashyap2012-12-26-0/+276
| | | | | | | | | | | | | | | | | | | | | This patch adds clock structure for Exynos4x12. Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | EXYNOS: EXYNOS4X12: Populate Exynos4x12 register addressesChander Kashyap2012-12-26-6/+42
| | | | | | | | | | | | | | | | | | | | | This patch populates base addresses of Exynos4x12 registers. Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | | m68k/lib: fix serial driver relocationangelo2013-01-11-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix coldfire serial driver bindings no more relocated to ram after last changes to drivers/serial/serial.c (regression). Serial initialization in ram has to be called after that gd->reloc_off is calculated. Signed-off-by: Angelo Dureghello <sysamfw@gmail.com> Cc: Jason Jin <jason.jin@freescale.com> Acked-by: Jens Scharsig (BuS Elektronik) <esw@bus-elektronik.de> Tested-by: Jens Scharsig (BuS Elektronik) <esw@bus-elektronik.de>
* | | Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2013-01-11-18/+89
|\ \ \
| * | | arm: Tabify code for MMC initializationTaylor Hutt2013-01-10-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The two modified lines were indented with spaces. They are now indented with tabs. Signed-off-by: Taylor Hutt <thutt@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
| * | | arm: Move bootstage record for board_init_f() to after arch_cpu_init()Simon Glass2013-01-10-2/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The timer may be inited in arch_cpu_init() so it is not safe to make a bootstage mark before this is called. Arrange the code to fix this. Note: The question was raised as to why we don't keep all archs in sync. PowerPC doesn't have specific bootstage markers at present (although it does use boot progress). I hope that the generic board series will solve this problem in general, but in the meantime this is a real problem, and only in ARM. We now get a correct time for board_init_f: Timer summary in microseconds: Mark Elapsed Stage 0 0 reset 100,000 100,000 spl_start 848,530 748,530 board_init_f 907,301 58,771 board_init_r 910,478 3,177 board_init Signed-off-by: Simon Glass <sjg@chromium.org>
| * | | arm: Make interrupts.o and reset.o in libarm also appear in SPLTom Wai-Hong Tam2013-01-10-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SPL u-boot may call do_reset() which depends on interrupts.o and reset.o. So make them also appear in SPL. Signed-off-by: Tom Wai-Hong Tam <waihong@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
| * | | arm: Add CONFIG_DISPLAY_BOARDINFO_LATE to display board info on LCDSimon Glass2013-01-10-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This option displays board info after stdio is running, so that it will appear on the LCD. If it is displayed earlier, the board info will appear on the serial console but not on the LCD. Here follows a blow-by-blow description. 1a. Without CONFIG_DISPLAY_BOARDINFO_LATE, on serial: U-Boot 2011.12-02550-g037e1c5-dirty (Nov 15 2012 - 14:29:42) for SMDK5250 CPU: S5PC520 @ 1700MHz Board: Google Snow, rev 0 I2C: ready DRAM: 2 GiB Elpida DDR3 @ 800MHz MMC: S5P MSHC0: 0, S5P MSHC1: 1 SF: Detected W25Q32 with page size 4 KiB, total 4 MiB *** Warning - bad CRC, using default environment In: mkbp-keyb Out: lcd Err: lcd Net: No ethernet found. Hit any key to stop autoboot: 0 SMDK5250 # 1b. Without CONFIG_DISPLAY_BOARDINFO_LATE, on LCD (note machine info is missing): In: mkbp-keyb Out: lcd Err: lcd Net: No ethernet found. Hit any key to stop autoboot: 0 SMDK5250 # 2a. With CONFIG_DISPLAY_BOARDINFO_LATE, on serial: U-Boot 2011.12-02550-g037e1c5 (Nov 15 2012 - 14:27:40) for SMDK5250 CPU: S5PC520 @ 1700MHz I2C: ready DRAM: 2 GiB Elpida DDR3 @ 800MHz MMC: S5P MSHC0: 0, S5P MSHC1: 1 SF: Detected W25Q32 with page size 4 KiB, total 4 MiB *** Warning - bad CRC, using default environment Model: Google Snow In: mkbp-keyb Out: lcd Err: lcd Net: No ethernet found. Hit any key to stop autoboot: 0 SMDK5250 # 2b. With CONFIG_DISPLAY_BOARDINFO_LATE, on LCD (note machine info is present): Model: Google Snow In: mkbp-keyb Out: lcd Err: lcd Net: No ethernet found. Hit any key to stop autoboot: 0 SMDK5250 # Since the LCD is all that a typical user sees, it is useful to display the model there. We may be able to rearrange things some other way one day, but at present this seems like a convenient way of getting the required behaviour. Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.1 at 2024-11-14 02:56:20 +0000