summaryrefslogtreecommitdiff
path: root/arch
Commit message (Collapse)AuthorAgeLines
* x86: Enable the queensbay cpu directory buildBin Meng2014-12-18-0/+1
| | | | | Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: ich6-gpio: Add Intel Tunnel Creek GPIO supportBin Meng2014-12-18-2/+15
| | | | | | | | | | | | Intel Tunnel Creek GPIO register block is compatible with current ich6-gpio driver, except the offset and content of GPIO block base address register in the LPC PCI configuration space are different. Use u16 instead of u32 to store the 16-bit I/O address of the GPIO registers so that it could support both Ivybridge and Tunnel Creek. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Convert microcode format to device-tree-onlySimon Glass2014-12-18-7/+11
| | | | | | | | | | To avoid having two microcode formats, adjust the build system to support obtaining the microcode from the device tree, even in the case where it must be made available before the device tree can be accessed. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Add basic support to queensbay platform and crownbay boardBin Meng2014-12-18-0/+326
| | | | | | | | | | | Implement minimum required functions for the basic support to queensbay platform and crownbay board. Currently the implementation is to call fsp_init() in the car_init(). We may move that call to cpu_init_f() in the future. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Integrate Tunnel Creek processor microcodeBin Meng2014-12-18-0/+368
| | | | | | | | Integrate the processor microcode version 1.05 for Tunnel Creek, CPUID device 20661h. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Correct problems in the microcode loadingSimon Glass2014-12-18-10/+15
| | | | | | | | | | | | | There are several problems in the code. The device tree decode is incorrect in ways that are masked due to a matching bug. Both are fixed. Also microcode_read_rev() should be inline and called before the microcode is written. Note: microcode writing does not work correctly on ivybridge for me. Further work is needed to resolve this. But this patch tidies up the existing code so that will be easier. Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: ivybridge: Update the microcodeSimon Glass2014-12-18-1374/+1504
| | | | | | | | There are new microcode revisions available. Update them. Also change the format so that the first 48 bytes are not omitted from the device tree data. Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: Move microcode updates into a separate directorySimon Glass2014-12-18-2/+2
| | | | | | | We might end up with a few of these, so put them in their own directory. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* ARM: UniPhier: select CONFIG_SPLMasahiro Yamada2014-12-18-0/+1
| | | | | | Now UniPhier platform is only supported with SPL. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* ARM: UniPhier: remove unnecessary ifdef conditionalMasahiro Yamada2014-12-18-4/+0
| | | | | | init_page_table is only set on SPL. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* ARM: UniPhier: fix property names of aliases nodes of device treesMasahiro Yamada2014-12-18-15/+15
| | | | | | | The property name of the "aliases" node should be "serial*" to assign a desired number for the device sequence number. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxTom Rini2014-12-16-16/+63
|\
| * p5040ds: changed liodn offsetsTudor Laurentiu2014-12-15-12/+12
| | | | | | | | | | | | | | | | | | Offsets were overlaping, causing pamu access violations in hypervised scenarios. Signed-off-by: Cristian Sovaiala <cristian.sovaiala@freescale.com> Signed-off-by: Laurentiu Tudor <Laurentiu.Tudor@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * mpc85xx: inhibit qman and bman portals by defaultJeffrey Ladouceur2014-12-15-0/+43
| | | | | | | | | | | | | | | | | | Not all portals might be managed and therefore visible. Set the isdr register so that the corresponding isr register won't be set. This is required when supporting power management. Signed-off-by: Jeffrey Ladouceur <Jeffrey.Ladouceur@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * powerpc/mpc85xx: Fix DDR TLB mapping leftoverYork Sun2014-12-15-4/+8
| | | | | | | | | | | | | | | | | | | | Commit f29f804a93e87c17670607641d120f431a3b0633 generalized the TLB mapping function, but made the DDR mapping leftover size to zero, causing the message not printed. Signed-off-by: York Sun <yorksun@freescale.com> CC: Alexander Graf <agraf@suse.de> CC: Scott Wood <scottwood@freescale.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini2014-12-16-43/+78
|\ \
| * | socfpga: correctly increment freeze_controller_base addressDinh Nguyen2014-12-06-5/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Correctly increment the base address of the freeze controller. And since SYSMGR_FRZCTRL_VIOCTRL_SHIFT is not needed, remove it from the include file. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Vince Bridgers <vbridger@opensource.altera.com> Cc: Chin Liang See <clsee@altera.com> Cc: Marek Vasut <marex@denx.de> Acked-by: Pavel Machek <pavel@denx.de> Cc: Wolfgang Denk <wd@denx.de>
| * | socfpga: add missing struct member fifo_triple_byteDinh Nguyen2014-12-06-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | socfpga_scan_manager structure was missing a data member. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Vince Bridgers <vbridger@opensource.altera.com> Cc: Chin Liang See <clsee@altera.com> Cc: Marek Vasut <marex@denx.de> Acked-by: Pavel Machek <pavel@denx.de> Cc: Wolfgang Denk <wd@denx.de>
| * | arm: socfpga: Add missing DW master SPI clock prototyp to clock_manager.hStefan Roese2014-12-06-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Vince Bridgers <vbridger@altera.com> Cc: Marek Vasut <marex@denx.de> Acked-by: Pavel Machek <pavel@denx.de>
| * | arm: socfpga: Use only one clrbits_le32 call to deassert SPI reset bitsStefan Roese2014-12-06-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As suggested by Pavel, lets combine the two calls into one. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Vince Bridgers <vbridger@altera.com> Cc: Marek Vasut <marex@denx.de> Acked-by: Pavel Machek <pavel@denx.de>
| * | arm: socfpga: dts: socrates: Add spi1/2 aliases needed DM SPI probingStefan Roese2014-12-06-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Without this alias, DM based probing does not work. So lets add this alias to get the bus numbering correct for the Designware SPI controllers. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Vince Bridgers <vbridger@altera.com> Cc: Marek Vasut <marex@denx.de> Acked-by: Pavel Machek <pavel@denx.de>
| * | arm: socfpga: dts: Add spi0/1 dts nodes for the Designware master SPI devicesStefan Roese2014-12-06-0/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Vince Bridgers <vbridger@altera.com> Cc: Marek Vasut <marex@denx.de> Acked-by: Pavel Machek <pavel@denx.de>
| * | arm: socfpga: dts: Add spi0 alias for Cadence QSPI driverStefan Roese2014-12-06-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Without this alias, DM based probing does not work. So lets add this alias to get the bus numbering correct. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Vince Bridgers <vbridger@altera.com> Cc: Marek Vasut <marex@denx.de> Cc: Pavel Machek <pavel@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
| * | arm: socfpga: dts: Add Cadence QSPI DT node to socfpga.dtsiStefan Roese2014-12-06-0/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This DT node is taken from the Rocketboard.org Linux repsitory. And is needed to enable (configure) the Cadence DM SPI driver. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Vince Bridgers <vbridger@altera.com> Cc: Marek Vasut <marex@denx.de> Cc: Pavel Machek <pavel@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
| * | arm: socfpga: dts: Move to SPDX license identifiersStefan Roese2014-12-06-36/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The socfpga dts files are copied from the Rocketboards.org repository. In U-Boot we usually replace the full-blown license header text with the SPDX license identifiers. Lets do this for these new dts files as well. I just forgot to do this while adding the DT support for socfpga. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Marek Vasut <marex@denx.de> Acked-by: Pavel Machek <pavel@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Vince Bridgers <vbridger@altera.com>
* | | x86: move arch-specific asmlinkage to <asm/linkage.h>Masahiro Yamada2014-12-15-1/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 65dd74a674d6 (x86: ivybridge: Implement SDRAM init) introduced x86-specific asmlinkage into arch/x86/include/asm/config.h. Commit ed0a2fbf14f7 (x86: Add a definition of asmlinkage) added the same macro define again, this time, into include/common.h. (Please do not add arch-specific stuff to include/common.h any more; it is already too cluttered.) The generic asmlinkage is defined in <linux/linkage.h>. If you want to override it with an arch-specific one, the best way is to add it to <asm/linkage.h> like Linux Kernel. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
* | | x86: Add a simple command to show FSP HOB informationBin Meng2014-12-13-0/+68
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | FSP builds a series of data structures called the Hand-Off-Blocks (HOBs) as it progresses through initializing the silicon. These data structures conform to the HOB format as described in the Platform Initialization (PI) specification Volume 3 Shared Architectual Elements specification, which is part of the UEFI specification. Create a simple command to parse the HOB list to display the HOB address, type and length in bytes. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* | | x86: Support Intel FSP initialization path in start.SBin Meng2014-12-13-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Per Intel FSP architecture specification, FSP provides 3 routines for bootloader to call. The first one is the TempRamInit (aka Cache-As-Ram initialization) and the second one is the FspInit which does the memory bring up (like MRC for other x86 targets) and chipset initialization. Those two routines have to be called before U-Boot jumping to board_init_f in start.S. The FspInit() will return several memory blocks called Hand Off Blocks (HOBs) whose format is described in Platform Initialization (PI) specification (part of the UEFI specication) to the bootloader. Save this HOB address to the U-Boot global data for later use. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* | | x86: Add post failure codes for bist and carBin Meng2014-12-13-0/+3
| | | | | | | | | | | | | | | Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* | | x86: queensbay: Adapt FSP support codesBin Meng2014-12-13-18/+28
| | | | | | | | | | | | | | | | | | | | | Use inline assembly codes to call FspNotify() to make sure parameters are passed on the stack as required by the FSP calling convention. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
* | | x86: Initial import from Intel FSP release for Queensbay platformBin Meng2014-12-13-0/+1522
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is the initial import from Intel FSP release for Queensbay platform (Tunnel Creek processor and Topcliff Platform Controller Hub), which can be downloaded from Intel website. For more details, check http://www.intel.com/fsp. Note: U-Boot coding convention was applied to these codes, so it looks completely different from the original Intel release. Also update FSP support codes license header to use SPDX ID. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
* | | x86: Add a simple superio driver for SMSC LPC47MBin Meng2014-12-13-0/+90
| | | | | | | | | | | | | | | | | | | | | | | | | | | On most x86 boards, the legacy serial ports (io address 0x3f8/0x2f8) are provided by a superio chip connected to the LPC bus. We must program the superio chip so that serial ports are available for us. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* | | x86: Add Intel Crown Bay board dts fileBin Meng2014-12-13-1/+55
| | | | | | | | | | | | | | | Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* | | x86: ich6-gpio: Move setup_pch_gpios() to board support codesBin Meng2014-12-13-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | Movie setup_pch_gpios() in the ich6-gpio driver to the board support codes, so that the driver does not need to know any platform specific stuff (ie: include the platform specifc chipset header file). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* | | x86: Clean up asm-offsetsBin Meng2014-12-13-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | Move GD_BIST from lib/asm-offsets.c to arch/x86/lib/asm-offsets.c as it is x86 arch specific stuff. Also remove GENERATED_GD_RELOC_OFF which is not referenced anymore. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* | | x86: Make ROM_SIZE configurable in KconfigBin Meng2014-12-13-1/+77
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently the ROM_SIZE is hardcoded to 8MB in arch/x86/Kconfig. This will not be the case when adding additional board support. Hence we make ROM_SIZE configurable (512KB/1MB/2MB/4MB/8MB/16MB) and have the board Kconfig file select the default ROM_SIZE. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* | | Merge git://git.denx.de/u-boot-dmTom Rini2014-12-11-7/+659
|\ \ \ | |_|/ |/| |
| * | dm: i2c: tegra: Convert to driver modelSimon Glass2014-12-11-7/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This converts all Tegra boards over to use driver model for I2C. The driver is adjusted to use driver model and the following obsolete CONFIGs are removed: - CONFIG_SYS_I2C_INIT_BOARD - CONFIG_I2C_MULTI_BUS - CONFIG_SYS_MAX_I2C_BUS - CONFIG_SYS_I2C_SPEED - CONFIG_SYS_I2C This has been tested on: - trimslice (no I2C) - beaver - Jetson-TK1 It has not been tested on Tegra 114 as I don't have that board. Acked-by: Heiko Schocher <hs@denx.de> Signed-off-by: Simon Glass <sjg@chromium.org>
| * | ARM: tegra: Add support for nyan-big boardAllen Martin2014-12-11-0/+376
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Nyan-big is a Tegra124 clamshell board that is very similar to venice2, but it has a different panel, the sdcard cd and wp sense are flipped, and it has a different revision of the AS3722 PMIC. This is the Acer Chromebook 13 CB5-311-T7NN (13.3-inch HD, NVIDIA Tegra K1, 2GB). The display is not currently supported, so it should boot on other nyan-based Chromebooks also, but only the device tree for nyan-big is provided here. The device tree file is from Linux but with features removed which are unlikely to be supported in U-Boot soon (regulators, pinmux). Also the addresses are updated to 32-bit. Signed-off-by: Allen Martin <amartin@nvidia.com> Signed-off-by: Simon Glass <sjg@chromium.org> (rebase, change to 'nyan-big', fix pinmux that resets nyan-big)
| * | tegra: dts: Sync tegra124.dtsi with linux kernelSimon Glass2014-12-11-0/+114
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Sync this up with Linux v3.18-rc5. Exclude features that are unlikely to supported in U-Boot soon (regulators, pinmux). Also the addresses are updated to 32-bit. Otherwise it is the same. Also bring in the dt-bindings for pinctrl. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Stephen Warren <swarren@nvidia.com>
| * | dts: Bring in Chrome OS keyboard device tree definitionSimon Glass2014-12-11-0/+105
| | | | | | | | | | | | | | | | | | | | | This will be used by nyan-big, but bring it in in a separate patch since it will be common to other boards. Signed-off-by: Simon Glass <sjg@chromium.org>
| * | dm: i2c: dts: Add an I2C bus for sandboxSimon Glass2014-12-11-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add an I2C bus to the device tree, with an EEPROM emulator attached to one of the addresses. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Heiko Schocher <hs@denx.de> Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * | dm: i2c: Add an I2C EEPROM simulatorSimon Glass2014-12-11-0/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | To enable testing of I2C, add a simple I2C EEPROM simulator for sandbox. It supports reading and writing from a small data store. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Heiko Schocher <hs@denx.de> Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* | | Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini2014-12-11-0/+5
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: board/freescale/mx6sxsabresd/mx6sxsabresd.c Signed-off-by: Tom Rini <trini@ti.com>
| * | | imx:mx6slevk add board level support for usbPeng Fan2014-11-14-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add pinmux settings, implement board_ehci_hcd_init, board_usb_phy_mode There are two usb port on mx6slevk board: 1. otg port 2. host port The following are the connection between usb controller and board usb interface, host port has not ID pin set: otg1 core <---> board otg port otg2 core <---> board host port In order to make host port work, board_usb_phy_mode return USB_INIT_HOST to let host port work in host mode. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Signed-off-by: Ye Li <B37916@freescale.com>
* | | | Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriqTom Rini2014-12-11-109/+393
|\ \ \ \ | |_|/ / |/| | |
| * | | kconfig: ls102xa: Change the prompt messagesAlison Wang2014-12-11-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As NOR/NAND/SD boot are all supported on LS1021AQDS/TWR boards, the prompt message "Support ls1021aqds_nor" in Kconfig is not clear. This patch changes it to "Support ls1021aqds". Signed-off-by: Alison Wang <alison.wang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | | ARM: ls102xa: Setting device's stream id for SMMUs.Xiubo Li2014-12-11-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | LS1 has 4 SMMUs for address translation of the masters. All the SMMUs' stream IDs are 8-bit. The address translation depends on the stream ID of the incoming transaction. Each master has unique stream ID assigned to it and is configurable through SCFG registers. The stream ID for the masters is identical and share the same register field of STREAM ID registers. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | | ARM: ls102xa: allow all the peripheral access permission as R/W.Xiubo Li2014-12-11-0/+119
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Central Security Unit (CSU) allows secure world software to change the default access control policies of peripherals/bus slaves, determining which bus masters may access them. This allows peripherals to be separated into distinct security domains. Combined with SMMU configuration of the system masters privileges, these features provide protection against indirect unauthorized access to data. For now we configure all the peripheral access permissions as R/W. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | | ls102xa: changing a few targets' configurations.Xiubo Li2014-12-11-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable hypervisors utilizing the ARMv7 virtualization extension on the LS1021A-QDS/TWR boards with the A7 core tile, we add the required configuration variable. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
generated by cgit v1.1 at 2024-11-09 16:11:27 +0000