summaryrefslogtreecommitdiff
path: root/arch
Commit message (Collapse)AuthorAgeLines
* OMAP3: SDRC: Introduce Numonyx DDR typeEnric Balletbo i Serra2010-10-17-0/+43
| | | | | | | | | | Introduce Numonyx DDR timings and provide CONFIG_OMAP3_NUMONYX_DDR config options to allow for platform files to setup their timings. Signed-off-by: Enric Balletbo i Serra <eballetbo@gmail.com> Acked-by: Steve Sakoman <steve.sakoman@linaro.org> Tested-by: Steve Sakoman <steve.sakoman@linaro.org> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* ARMV7: OMAP4: Implement relocation for Panda and OMAP4430SDPSteve Sakoman2010-10-17-0/+5
| | | | | | | This patch fixes the build breakage introduced by the recent relocation changes for ARMV7 Signed-off-by: Steve Sakoman <steve@sakoman.com>
* ARMV7: OMAP3: Fix bug in get_sdr_cs_offset()Steve Sakoman2010-10-17-1/+1
| | | | | | | | | | | | | This patch fixes a typo in the routine to calculate the cs offset based upon the contents of the SDRC cs_cfg register. This function mistakenly shifts the CS1STARTLOW field 17 bits right instead of 17 bits left. This hasn't been an issue to date because all OMAP3 boards currently are configured to have zeros in this field. Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Steve Sakoman <steve.sakoman@linaro.org>
* ARMV7: OMAP: Add new mmc driver compatible with CONFIG_GENERIC_MMCSukumar Ghorai2010-10-17-0/+20
| | | | | | | | | | | | | OMAP boards currently use a legacy mmc driver. This patch adds a new mmc driver which will work with the generic mmc driver in u-boot. This new driver will work with both OMAP3 and OMAP4 boards. This patch does not remove the old driver. It should remain in the tree until all boards that use it switch to the new driver. Signed-off-by: Sukumar Ghorai <s-ghorai@ti.com> Tested-by: Steve Sakoman <steve@sakoman.com>
* Merge branch 'master' of git://git.denx.de/u-boot-imxWolfgang Denk2010-10-17-0/+428
|\
| * MX31: add support for setting pin padsStefano Babic2010-10-13-0/+421
| | | | | | | | | | | | | | The patch adds a utility function and defines to set the pad as it is done in linux. Signed-off-by: Stefano Babic <sbabic@denx.de>
| * MX31: Adding missing iomux pin to MX.31 registersStefano Babic2010-10-13-0/+7
| | | | | | | | Signed-off-by: Stefano Babic <sbabic@denx.de>
* | env_mmc: Fix crashing bug encountered after enabling ARM relocationSteve Sakoman2010-10-13-5/+5
| | | | | | | | | | | | | | | | | | | | | | The crash was occuring in env_relocate because it was being called prior to mmc_initialize. This patch moves the MMC initialization earlier in the init process. This patch also cleans up the env_relocate_spec code in env_mmc.c Signed-off-by: Steve Sakoman <steve.sakoman@linaro.org> Acked-by: Stefano Babic <sbabic@denx.de>
* | Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk2010-10-13-383/+493
|\ \
| * | ARMV7: Versatile Express Coretile CortexA9x4 supportMatt Waddel2010-10-13-0/+175
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adds support for the ARM quad-core Cortex-A9 processor This system includes a motherboard(Versatile Express), daughterboard (Coretile), and SOC(Cortex-A9 quad core). The serial port, ethernet, and flash systems work with these additions. The naming convention is: SOC -> CortexA9 quad core = ca9x4 daughterboard -> Coretile = ct motherboard -> Versatile Express = vxp This gives ca9x4_ct_vxp.c as the board support file. Signed-off-by: Matt Waddel <matt.waddel@linaro.org>
| * | arch/arm/include/asm/sizes.h: cleanupsAndreas Bießmann2010-10-13-206/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | Merge several sizes.h in asm/arch subdirectories into a single asm/sizes.h file. Fixup usage of asm/arch/sizes.h in some files to use the merged file. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
| * | Kirkwood: dram_init is moved to dram.cPrafulla Wadaskar2010-10-13-0/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For all Kirkwood boards so far dram_init function is duplicated dram_init function is moved to dram.c and relevant code from all board specific files removed If any board needs specific dram init handling than standard one, then, a macro CONFIG_SYS_BOARD_DRAM_INIT should be defined in board config header file and the dram_init function can be put in board specific source file For ex. keymile boards Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
| * | orion5x: optimize window size computationAlbert Aribaud2010-10-13-11/+21
| | | | | | | | | | | | | | | Signed-off-by: Chris Moore <moore@free.fr> Signed-off-by: Albert Aribaud <albert.aribaud@free.fr>
| * | Kirkwood: print_cpuinfo fixed for valid devid revidPrafulla Wadaskar2010-10-13-11/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Earlier Device Identification register was used to detect the type for SoC, considering 88F6282 support to be added, It is not possible to detect the same using current algorithm. With this patch, device ID is being read using PCIE devid register, also valid chip revision ID will also be read and displayed Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
| * | orion5x: fix relocation-incompatible codeAlbert Aribaud2010-10-11-31/+54
| | | | | | | | | | | | Signed-off-by: Albert Aribaud <albert.aribaud@free.fr>
| * | arm: bugfix: replace ble with blo in start.S filesAlbert Aribaud2010-10-11-68/+67
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Generalized misuse of ble within relocation and bss initialization loops caused one iteration too many. Instead of ble ('branch if lower or equal'), use blo ('branch if lower'). While we're at it, fix all 'addreee' typos. Signed-off-by: Albert Aribaud <albert.aribaud@free.fr>
| * | Merge branch 'at91' of git://git.denx.de/u-boot-atmelWolfgang Denk2010-10-11-21/+29
| |\ \
| | * | at91: Add arch_preboot_os which disables PIT in a faster wayAlexander Stein2010-10-05-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When disabled the PIT runs until it reaches the CPIV value. The Linux PIT driver stops the PIT and waits until it stopped. This can take over 100ms. Simply stopping in u-boot isn't sufficient as the PIT will still be running when Linux is waiting until it stopped. So, we stop it in u-boot by setting the compare value to a value slightly greater than the current running counter to make the PIT stopped in short time. Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
| | * | at91_emac.h: fix typo in register definitionAndreas Bießmann2010-10-05-1/+1
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> Acked-by: Jens Scharsig <js_at_ng@scharsoft.de>
| | * | AT91: convert cpu.c to struct SoC accessReinhard Meyer2010-10-05-20/+12
| | | | | | | | | | | | | | | | Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
| * | | Merge branch 'master' of git://git.denx.de/u-boot-imxWolfgang Denk2010-10-11-34/+80
| |\ \ \ | | | |/ | | |/|
| | * | MX51: Register definitions cannot be included in board config fileStefano Babic2010-09-30-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Due to wrong dependencies, it is not possible to include imx_regs.h inside the board configuration file. Signed-off-by: Stefano Babic <sbabic@denx.de>
| | * | MX51: add structure to access System Reset ControllerStefano Babic2010-09-29-0/+10
| | | | | | | | | | | | | | | | Signed-off-by: Stefano Babic <sbabic@denx.de>
| | * | MX51: Added pins definition to set up padsStefano Babic2010-09-29-0/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add pins definitions to set up RAM pads. Pins have only a pad, there is no entry in the multiplexer. Signed-off-by: Stefano Babic <sbabic@denx.de>
| | * | ARM: Use syslib functions for all CORTEXA8Stefano Babic2010-09-29-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The OMAP3 cpu directory contains a syslib file with some utilities that can be shared by all targets using arm cortexa8 processors, not only OMAP. Signed-off-by: Stefano Babic <sbabic@denx.de>
| | * | Use common function to set GPIOs for MX3 and MX5Stefano Babic2010-09-29-28/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch adds support for setting gpios to the MX51 processor and change name to the corresponding functions for MX31. In this way, it is possible to get rid of nasty #ifdef switches related to the processor type. Signed-off-by: Stefano Babic <sbabic@denx.de>
* | | | powerpc: Remove warm reset entry pointPeter Tyser2010-10-12-137/+25
| | | | | | | | | | | | | | | | | | | | | | | | No boards utilize the warm reset entry point, so remove it. Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
* | | | powerpc: Zero out board info struct on bootupPeter Tyser2010-10-12-16/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This puts the board info struct in a known state and allows the removal of other code which initialized board info fields to 0. Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
* | | | Merge branch 'master' of git://git.denx.de/u-boot-microblazeWolfgang Denk2010-10-12-11/+65
|\ \ \ \
| * | | | microblaze: Support little-endian microblaze targetMichal Simek2010-10-12-9/+55
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Microblaze little-endian toolchain should export __MICROBLAZEEL__. Signed-off-by: Michal Simek <monstr@monstr.eu>
| * | | | microblaze: Add support for NET_MULTI apiMichal Simek2010-10-12-2/+10
| |/ / / | | | | | | | | | | | | | | | | | | | | Microblaze hasn't supported NET_MULTI support. Signed-off-by: Michal Simek <monstr@monstr.eu>
* | | | davinci_emac: davinci_eth_set_mac_addr to ->write_hwaddrBen Gardiner2010-10-11-20/+0
|/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch proposes to migrate the davinci_emac driver to using the eth_device->write_hwaddr function pointer as suggested by Ben Warren. All the davinci boards had the behaviour, prior to this patch, of sync'ing the environment variable enetaddr with the MAC address read from non-volatile storage on boot -- when the two locations disagreed, the environment variable value took precendence. This patch keeps the same behaviour but lets eth_initialize take care of it. This patch refactors davinci_emac setup in the boards so that the MAC address is read from non-volatile storage into the environment variable and then the environment variable value is use in eth_intialize. The only exception is the direct call to davinci_eth_set_mac_addr made by the da830evm board init which was changed into an assignment of the enetaddr field. Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca> Tested-by: Nick Thompson <nick.thompson@ge.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* | | Merge branch 'master' of git://git.denx.de/u-boot-x86Wolfgang Denk2010-10-11-648/+635
|\ \ \
| * | | x86: Implement fully relocatable imageGraeme Russ2010-10-07-24/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | u-boot.bin can be loaded at any 4-byte aligned memory location and directly 'jumped' to using the 'go' command using the load address as the start address. Doing so performs a 'warm boot' which skips memory initialisation and other low-level initialisations, relocates U-Boot to upper memory and starts U-Boot in RAM as per normal 'cold boot'
| * | | x86: Use loops instead of memcpy/memset in board_init_fGraeme Russ2010-10-07-16/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Provides a small speed increase and prepares for fully relocatable image. Downside is the TEXT_BASE, bss, load address etc must ALL be aligned on a a 4-byte boundary which is not such a terrible restriction as everything is already 4-byte aligned anyway
| * | | x86: Rearrange linker scriptGraeme Russ2010-10-07-2/+3
| | | | | | | | | | | | | | | | Tidy up the linker script and discard some sections to save space
| * | | x86: Rename linker script symbolsGraeme Russ2010-10-07-24/+24
| | | | | | | | | | | | | | | | Create more generic names for the symbols exported from the linker script
| * | | x86: Set cold/warm boot flagGraeme Russ2010-10-07-16/+13
| | | |
| * | | x86: Place global data below stack before entering CGraeme Russ2010-10-07-37/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | By reserving space for the Global Data immediately below the stack during assembly level initialisation, the C declaration of the static global data can be removed, along with the 'RAM Bootstrap' function. This results in cleaner code, and the ability to pass boot-up flags from assembler into C
| * | | x86: Dont clobber %eax after getting memory sizeGraeme Russ2010-10-07-3/+2
| | | | | | | | | | | | | | | | By using another register, reduce code size by one instruction
| * | | x86: Don't clobber %ebxGraeme Russ2010-10-07-7/+12
| | | | | | | | | | | | | | | | %ebx will hold low-level boot flags and must be preserved
| * | | x86: Remove usage of %ebp as a return pointerGraeme Russ2010-10-07-10/+10
| | | | | | | | | | | | | | | | Using %ebp as a return pointer prevents creating 'load anywhere' images
| * | | x86: Move ECC initialisation outside RAM initialisationGraeme Russ2010-10-07-14/+14
| | | | | | | | | | | | | | | | | | | | To allow for 'load anywhere' images, the %ebp return pointer 'hack' must be removed, so we cannot have two 'calls' to get_mem_size
| * | | x86: Remove progress indication in low-level initGraeme Russ2010-10-07-42/+2
| | | | | | | | | | | | | | | | | | | | Progress indication is not relocation friendly so remove it in preperation for full relocatability support
| * | | x86: Fix %ss and %esp in register structure for interruptsGraeme Russ2010-10-07-4/+45
| | | |
| * | | x86: Change compiler optionsGraeme Russ2010-10-07-17/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Change to: - reparam=3 - no-from-pointer - no-stack-protector - preferred-stack-boundary=2 - no-top-level-reorder These options make the code a little smaller and faster
| * | | x86: Coding Style CleanupGraeme Russ2010-10-07-373/+362
| | | | | | | | | | | | | | | | Perform some basic code cleanups of the x86 files
| * | | x86: Move loading of GTD to C codeGraeme Russ2010-10-07-96/+57
| | | | | | | | | | | | | | | | | | | | Linux has C macros and code to load the GTD after switching to Protected Mode. Using these greatly simplifies the assembler code
| * | | x86: use gc sections to reduce image sizeGraeme Russ2010-10-07-0/+3
| | | | | | | | | | | | | | | | | | | | Follow the discussion of Charles Manning and Mike Frysinger. Using gc_sections helps reduce image size.
| * | | x86: zboot updateGraeme Russ2010-10-07-5/+13
| | | | | | | | | | | | | | | | | | | | | | | | The header of recent Linux Kernels includes the size of the image, and therefore is not needed to be passed to zboot. Still process the third parameter (size of image) in the event that an older kernel is being loaded
generated by cgit v1.1 at 2024-11-13 11:21:38 +0000