summaryrefslogtreecommitdiff
path: root/arch/x86
Commit message (Collapse)AuthorAgeLines
...
* Kill unneeded #include <linux/kconfig.h>Masahiro Yamada2015-07-27-1/+0
| | | | | | | | | | | | | | | | Because the top-level Makefile forces all the source files to include include/linux/kconfig.h (see the UBOOTINCLUDE define), these includes are redundant. By the way, there are exceptions for the statement above; host programs. In fact, host tools in U-Boot depend on a particular board configuration, although I think they should not. So, some files still include <linux/config.h> to work around build errors on host tools. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Ian Campbell <ijc@hellion.org.uk> Acked-by: Simon Glass <sjg@chromium.org>
* x86: delete unneeded declarations of disable_irq() and enable_irq()Masahiro Yamada2015-07-22-4/+0
| | | | | | | | | | | | | These two declarations in arch/x86/include/asm/interrupt.h conflict with ones in include/linux/compat.h, so x86 boards cannot include <linux/compat.h>. The comment /* arch/x86/lib/interrupts.c */ is bogus now, and we do not see any definitions of disable_irq() and enable_irq() in there. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* dm: x86: baytrail: Correct PCI region 3 when driver model is usedSimon Glass2015-07-14-0/+2
| | | | | | | | Commit afbbd413a fixed this for non-driver-model. Make sure that the driver model code handles this also. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* dm: x86: minnowmax: Move PCI to use driver modelSimon Glass2015-07-14-47/+10
| | | | | | | | | Adjust minnowmax to use driver model for PCI. This requires adding a device tree node to specify the ranges, removing the board-specific PCI code and ensuring that the host bridge is configured. Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: pci: Tidy up the generic x86 PCI driverSimon Glass2015-07-14-22/+0
| | | | | | | | This driver should use the x86 PCI configuration functions. Also adjust its compatible string to something generic (i.e. without a vendor name). Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Configure VESA parameters before loading Linux kernelBin Meng2015-07-14-0/+3
| | | | | | | | | Store VESA parameters to Linux setup header so that vesafb driver in the kernel could work. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Jian Luo <jian.luo4@boschrexroth.de>
* x86: Remove MARK_GRAPHICS_MEM_WRCOMBBin Meng2015-07-14-8/+0
| | | | | | | | MARK_GRAPHICS_MEM_WRCOMB is not referenced anywhere in the code, hence remove it. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Move VGA option rom macros to KconfigBin Meng2015-07-14-0/+22
| | | | | | | | | | Move X86_OPTION_ROM_FILE & X86_OPTION_ROM_ADDR to arch/x86/Kconfig and rename them to VGA_BIOS_FILE & VGA_BIOS_ADDR which depend on HAVE_VGA_BIOS. The new names are consistent with other x86 binary blob options like HAVE_FSP/FSP_FILE/FSP_ADDR. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: cmd_mtrr: Improve MTRR list informationBin Meng2015-07-14-1/+2
| | | | | | | | Print the meaningful base address and mask of an MTRR range without showing the memory type encoding or valid bit. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: queensbay: Change CPU_ADDR_BITS to 32Bin Meng2015-07-14-0/+4
| | | | | | | | | Per CPUID:80000008h result, the maximum physical address bits of TunnelCreek processor is 32 instead of default 36. This will fix the incorrect decoding of MTRR range mask. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Setup fixed range MTRRs for legacy regionsBin Meng2015-07-14-11/+38
| | | | | | | | | We should setup fixed range MTRRs for some legacy regions like VGA RAM and PCI ROM areas as uncacheable. Note FSP may setup these to other cache settings, but we can override this in x86_cpu_init_f(). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: bios: Allow pci config read/write to host bridge in int1a_handlerJian Luo2015-07-14-9/+1
| | | | | | | | | We should allow pci config read/write to host bridge (b.d.f = 0.0.0) in the int1a_handler() which is a valid pci device. Signed-off-by: Jian Luo <jian.luo4@boschrexroth.de> Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: bios: Synchronize stack between real and protected modeJian Luo2015-07-14-0/+23
| | | | | | | | | PCI option rom may use different SS during its execution, so it is not safe to assume esp pointed to the same location in the protected mode. Signed-off-by: Jian Luo <jian.luo4@boschrexroth.de> Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: queensbay: Change PCIe root ports' interrupt routingBin Meng2015-07-14-10/+23
| | | | | | | | | | | | | | | So far interrupt routing works pretty well for any on-chip devices on Intel Crown Bay. When inserting any PCIe card to any PCIe slot, Linux kernel is smart enough to do interrupt swizzling and figure out device's irq using its parent bridge's interrupt routing info all the way up to its root port. In U-Boot all PCIe root ports' interrupts were routed to PIRQ E/F/G/H before, while actually all PCIe downstream ports received INTx are routed to PIRQ A/B/C/D directly and not configurable. Now we change this mapping so that any external PCIe device can work correctly. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Generate a valid MultiProcessor (MP) tableBin Meng2015-07-14-0/+181
| | | | | | | | | | | | | | | | | | | | Implement write_mp_table() to create a minimal working MP table. This includes an MP floating table, a configuration table header and all of the 5 base configuration table entries. The I/O interrupt assignment table entry is created based on the same information used in the creation of PIRQ routing table from device tree. A check duplicated entry logic is applied to prevent writing multiple I/O interrupt entries with the same information. Use a Kconfig option GENERATE_MP_TABLE to tell U-Boot whether we need actually write the MP table at the F seg, just like we did for PIRQ routing and SFI tables. With MP table existence, linux kernel will switch to I/O APIC and local APIC to process all the peripheral interrupts instead of 8259 PICs. This takes full advantage of the multicore hardware and the SMP kernel. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Add MultiProcessor (MP) table APIsBin Meng2015-07-14-0/+688
| | | | | | | | | | | The MP table provides a way for the operating system to support for symmetric multiprocessing as well as symmetric I/O interrupt handling with the local APIC and I/O APIC. We provide a bunch of APIs for U-Boot to write the floating table, configuration table header as well as base and extended table entries. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Remove inline for lapic access routinesBin Meng2015-07-14-151/+153
| | | | | | | | | Remove inline for lapic access routines and expose lapic_read() & lapic_write() as APIs to read/write lapic registers. Also move stop_this_cpu() to mp_init.c as it has nothing to do with lapic. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Add I/O APIC register access routinesBin Meng2015-07-14-1/+46
| | | | | | | | | I/O APIC registers are addressed indirectly. Add io_apic_read() and io_apic_write() routines to help register access. Two macros for I/O APIC ID and version register offset are also added. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Clean up ioapic header fileBin Meng2015-07-14-23/+3
| | | | | | | Remove all the dead/unused macros from asm/ioapic.h. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Reduce PIRQ routing table sizeBin Meng2015-07-14-9/+56
| | | | | | | | | | There is no need to populate multiple irq info entries with the same bus number and device number, but with different interrupt pin. We can use the same entry to store all the 4 interrupt pin (INT A/B/C/D) routing information to reduce the whole PIRQ routing table size. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Ignore function number when writing PIRQ routing tableBin Meng2015-07-14-4/+3
| | | | | | | | | | | In fill_irq_info() pci device's function number is written into the table, however this is not really necessary. The function number can be anything as OS doesn't care about this field, neither does the PIRQ routing specification. Change to always writing 0 as the function number. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Write correct bus number for the irq routerBin Meng2015-07-14-1/+1
| | | | | | | | We should write correct bus number to the PIRQ routing table for the irq router from device tree, instead of hard-coded zero. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: queensbay: Correct Topcliff device irqsBin Meng2015-07-14-12/+12
| | | | | | | | | | | | | | | There are 4 usb ports on the Intel Crown Bay board, 2 of which are connected to Topcliff usb host 0 and the other 2 connected to usb host 1. USB devices inserted in the ports connected to usb host 1 cannot get detected due to wrong IRQ assigned to the controller. Actually we need apply the PCI interrupt pin swizzling logic to all devices on the Topcliff chipset when configuring the PIRQ routing. This was observed on usb ports, but device 6 and 10 irqs are also wrong. Correct them all together. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: crownbay: Enable DM RTC supportBin Meng2015-07-14-0/+7
| | | | | | | Add a RTC node in the device tree to enable DM RTC support. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: crownbay: Add MP initializationBin Meng2015-07-14-0/+20
| | | | | | | | | | | | Intel Crown Bay board has a TunnelCreek processor which supports hyper-threading. Add /cpus node in the crownbay.dts and enable the MP initialization. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org> (modified to remove error: overriding the value of OF_CONTROL. Old value: "y", new value: "y")
* x86: Clean up lapic codesBin Meng2015-07-14-183/+103
| | | | | | | | | | | | | | | This commit cleans up the lapic codes: - Delete arch/x86/include/asm/lapic_def.h, and move register and bit defines into arch/x86/include/asm/lapic.h - Use MSR defines from msr-index.h in enable_lapic() and disable_lapic() - Remove unnecessary stuff like NEED_LAPIC, X86_GOOD_APIC and CONFIG_AP_IN_SIPI_WAIT - Move struct x86_cpu_priv defines to asm/arch-ivybridge/bd82x6x.h, as it is not apic related and only used by ivybridge - Fix coding convention issues Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Move lapic_setup() call into init_bsp()Bin Meng2015-07-14-3/+1
| | | | | | | | | | Currently lapic_setup() is called before calling mp_init(), which then calls init_bsp() where it calls enable_lapic(), which was already enabled in lapic_setup(). Hence move lapic_setup() call into init_bsp() to avoid the duplication. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Move MP initialization codes into a common placeBin Meng2015-07-14-73/+112
| | | | | | | | | | | Most of the MP initialization codes in arch/x86/cpu/baytrail/cpu.c is common to all x86 processors, except detect_num_cpus() which varies from cpu to cpu. Move these to arch/x86/cpu/cpu.c and implement the new 'get_count' method for baytrail and cpu_x86 drivers. Now we call cpu_get_count() in mp_init() to get the number of CPUs. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: ivybridge: Remove SMP from CPU_SPECIFIC_OPTIONSBin Meng2015-07-14-1/+0
| | | | | | | Ivybridge is not ready for U-Boot MP initialization yet. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: kconfig: Fix minor nits in MAX_CPUSBin Meng2015-07-14-12/+12
| | | | | | | | | Move MAX_CPUS definition after SMP so that it shows below SMP in the menuconfig. Also replace the leading spaces in the MAX_CPUS section with tabs to conform coding standard. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: kconfig: Make MAX_CPUS and AP_STACK_SIZE depend on SMPBin Meng2015-07-14-0/+2
| | | | | | | MAX_CPUS and AP_STACK_SIZE are only meaningful when SMP is on. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: dm: Clean up cpu driversBin Meng2015-07-14-55/+86
| | | | | | | | | | | | | | | This commit does the following to clean up x86 cpu dm drivers: - Move cpu_x86 driver codes from arch/x86/cpu/cpu.c to a dedicated file arch/x86/cpu/cpu_x86.c - Rename x86_cpu_get_desc() to cpu_x86_get_desc() to keep consistent naming with other dm drivers - Add a new cpu_x86_bind() in the cpu_x86 driver which does exactly the same as the one in the intel baytrail cpu driver - Update intel baytrail cpu driver to use cpu_x86_get_desc() and cpu_x86_bind() Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: fsp: Move FspInitEntry call to board_init_f()Bin Meng2015-07-14-22/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | The call to FspInitEntry is done in arch/x86/lib/fsp/fsp_car.S so far. It worked pretty well but looks not that good. Apart from doing too much work than just enabling CAR, it cannot read the configuration data from device tree at that time. Now we want to move it a little bit later as part of init_sequence_f[] being called by board_init_f(). This way it looks and works better in the U-Boot initialization path. Due to FSP's design, after calling FspInitEntry it will not return to its caller, instead it jumps to a continuation function which is given by bootloader with a new stack in system memory. The original stack in the CAR is gone, but its content is perserved by FSP and described by a bootloader temporary memory HOB. Technically we can recover anything we had before in the previous stack, but that is way too complicated. To make life much easier, in the FSP continuation routine we just simply call fsp_init_done() and jump back to car_init_ret() to redo the whole board_init_f() initialization, but this time with a non-zero HOB list pointer saved in U-Boot's global data so that we can bypass the FspInitEntry for the second time. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Andrew Bradford <andrew.bradford@kodakalaris.com> Tested-by: Simon Glass <sjg@chromium.org>
* x86: fsp: Load GDT before calling FspInitEntryBin Meng2015-07-14-2/+33
| | | | | | | | | | | | | | | | | | | | | Currently the FSP execution environment GDT is setup by U-Boot in arch/x86/cpu/start16.S, which works pretty well. But if we try to move the FspInitEntry call a little bit later to better fit into U-Boot's initialization sequence, FSP will fail to bring up the AP due to #GP fault as AP's GDT is duplicated from BSP whose GDT is now moved into CAR, and unfortunately FSP calls AP initialization after it disables the CAR. So basically the BSP's GDT still refers to the one in the CAR, whose content is no longer available, so when AP starts up and loads its segment register, it blows up. To resolve this, we load GDT before calling into FspInitEntry. The GDT is the same one used in arch/x86/cpu/start16.S, which is in the ROM and exists forever. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Andrew Bradford <andrew.bradford@kodakalaris.com> Tested-by: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Add Kconfig options to be used by arch/x86/cpu/config.mkBin Meng2015-07-14-3/+18
| | | | | | | | | | Add RESET_SEG_START, RESET_SEG_SIZE and RESET_VEC_LOC Kconfig options and make arch/x86/cpu/config.mk use these options. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Andrew Bradford <andrew.bradford@kodakalaris.com> Tested-by: Simon Glass <sjg@chromium.org>
* Move default y configs out of arch/board KconfigJoe Hershberger2015-06-25-15/+0
| | | | | | | | | | | | | | | | | | | Some archs/boards specify their own default by pre-defining the config which causes the Kconfig system to mix up the order of the configs in the defconfigs... This will cause merge pain if allowed to proliferate. Remove the configs that behave this way from the archs. A few configs still remain, but that is because they only exist as defaults and do not have a proper Kconfig entry. Those appear to be: SPIFLASH DISPLAY_BOARDINFO Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> [trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates, drop DM_USB from MSI_Primo81 as USB_MUSB_SUNXI isn't converted yet to DM] Signed-off-by: Tom Rini <trini@konsulko.com>
* x86: gpio: add pinctrl support from the device treeGabriel Huau2015-06-04-0/+24
| | | | | | | | | Every pin can be configured now from the device tree. A dt-bindings has been added to describe the different property available. Change-Id: I1668886062655f83700d0e7bbbe3ad09b19ee975 Signed-off-by: Gabriel Huau <contact@huau-gabriel.fr> Acked-by: Simon Glass <sjg@chromium.org>
* x86: baytrail: pci region 3 is not always mapped to end of ramAndrew Bradford2015-06-04-1/+1
| | | | | | | | | | | | Baytrail physically maps the first 2 GB of SDRAM from 0x0 to 0x7FFFFFFF and additional SDRAM is mapped from 0x100000000 and up. There is a physical memory hole from 0x80000000 to 0xFFFFFFFF for other uses. Because of this, PCI region 3 should only try to use up to the amount of SDRAM or 0x80000000, which ever is less. Signed-off-by: Andrew Bradford <andrew.bradford@kodakalaris.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: qemu: Implement PIRQ routingBin Meng2015-06-04-0/+61
| | | | | | | | | Support QEMU PIRQ routing via device tree on both i440fx and q35 platforms. With this commit, Linux booting on QEMU from U-Boot has working ATA/SATA, USB and ethernet. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: coreboot: Control I/O port 0xb2 writing via device treeBin Meng2015-06-04-3/+10
| | | | | | | | | | Writing 0xcb to I/O port 0xb2 (Advanced Power Management Control) causes U-Boot to hang on QEMU q35 target. We introduce a config option in the device tree "u-boot,no-apm-finalize" under /config node if we don't want to do that. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: qemu: Create separate i440fx and q35 device treesBin Meng2015-06-04-2/+37
| | | | | | | | | | Although the two qemu-x86 targets (i440fx and q35) share a lot in common, they still have something that cannot easily handled in one single device tree). Split to create two dedicated device tree files and make the i440fx be the default build target. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: coreboot: Fix cosmetic issuesBin Meng2015-06-04-25/+3
| | | | | | | Clean up arch/x86/cpu/coreboot.c to fix several cosmetic issues. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: kconfig: Make FSP_TEMP_RAM_ADDR depend on HAVE_FSPBin Meng2015-06-04-0/+1
| | | | | | | FSP_TEMP_RAM_ADDR should only be visible when HAVE_FSP is on. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: qemu: Adjust VGA initializationBin Meng2015-06-04-19/+17
| | | | | | | | | | | | | As VGA option rom needs to run at C segment, although QEMU PAM emulation seems to only guard E/F segments, for correctness, move VGA initialization after PAM decode C/D/E/F segments. Also since we already tested QEMU targets to differentiate I440FX and Q35 platforms, change to locate the VGA device via hardcoded b.d.f instead of dynamic search for its vendor id & device id pair. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: qemu: Enable legacy IDE I/O ports decodeBin Meng2015-06-04-0/+38
| | | | | | | | | QEMU always decode legacy IDE I/O ports on PIIX chipset. However Linux ata_piix driver does sanity check to see whether legacy ports decode is turned on. To make Linux ata_piix driver happy, turn on the decode via IDE_TIMING register. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: qemu: Turn on legacy segments decodeBin Meng2015-06-04-0/+26
| | | | | | | | | By default the legacy segments C/D/E/F do not decode to system RAM. Turn on the decode via Programmable Attribute Map (PAM) registers so that we can write configuration tables in the F segment. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: fsp_support: Correct high mem comment typoAndrew Bradford2015-06-04-1/+1
| | | | | | | | High mem starts at 4 GiB. Signed-off-by: Andrew Bradford <andrew.bradford@kodakalaris.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Do sanity test on pirq table before writingBin Meng2015-06-04-0/+3
| | | | | | | | | If pirq_routing_table points to NULL, that means U-Boot fails to generate the table before in create_pirq_routing_table(), so we test it against NULL before actually writing it. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: quark: Implement PIRQ routingBin Meng2015-06-04-15/+123
| | | | | | | | | Intel Quark SoC has the same interrupt routing mechanism as the Queensbay platform, only the difference is that PCI devices' INTA/B/C/D are harcoded and cannot be changed freely. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Refactor PIRQ routing supportBin Meng2015-06-04-300/+383
| | | | | | | | | | | | PIRQ routing is pretty much common in Intel chipset. It has several PIRQ links (normally 8) and corresponding registers (either in PCI configuration space or memory-mapped IBASE) to configure the legacy 8259 IRQ vector mapping. Refactor current Queensbay PIRQ routing support using device tree and move it to a common place, so that we can easily add PIRQ routing support on a new platform. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>