summaryrefslogtreecommitdiff
path: root/arch/x86
Commit message (Collapse)AuthorAgeLines
...
* x86: fsp: Do not assert VPD_IMAGE_REV when DEBUGBin Meng2015-08-14-4/+1
| | | | | | | | | | When using different release version of Intel FSP, the VPD_IMAGE_REV is different (ie: BayTrail Gold 3 is 0x0303 while Gold 4 is 0x0304). Remove the asserting of this so that U-Boot does not hang in a debug build. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: baytrail: Configure FSP UPD from device treeAndrew Bradford2015-08-14-30/+226
| | | | | | | | | | | | | | | | | Allow for configuration of FSP UPD from the device tree which will override any settings which the FSP was built with itself. Modify the MinnowMax and BayleyBay boards to transfer sensible UPD settings from the Intel FSPv4 Gold release to the respective dts files, with the condition that the memory-down parameters for MinnowMax are also used. Signed-off-by: Andrew Bradford <andrew.bradford@kodakalaris.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Removed fsp,mrc-debug-msg and fsp,enable-xhci for minnowmax, bayleybay Fixed lines >80col Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: Enable debug UART for MinnowmaxSimon Glass2015-08-06-0/+9
| | | | | | | | | | | | | | | Enable the debug UART and emit a single 'a' early in the init sequence to show that it is working. Unfortunately the debug UART implementation needs a stack to work. I cannot seem to remove this limitation as the absolute 'jmp %eax' instruction goes off into the weeds. So this means that the character output cannot be any earlier than car_init_ret, where memory is available for a stack. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
* x86: qemu: Support operation as an EFI payloadSimon Glass2015-08-05-1/+6
| | | | | | | | | Disable a few things which interfere with the EFI init. This allows QEMU to to boot into EFI, load a U-Boot payload then boot to the U-Boot prompt. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
* x86: baytrail: Support operation as an EFI payloadSimon Glass2015-08-05-1/+5
| | | | | | | | | Disable a few things which interfere with the EFI init. This allows the Minnowboard MAX to boot into EFI, load a U-Boot payload then boot to the U-Boot prompt. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Add helper code for running from EFISimon Glass2015-08-05-0/+165
| | | | | | | | | | When U-Boot is running from EFI some of the x86 init is replaced with EFI-specific init. For example, since DRAM has already been set up, we only need to find it, not init it. Add these functions so that boards can easily allow booting from EFI if required. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Handle running as EFI payloadSimon Glass2015-08-05-10/+43
| | | | | | | | | When U-Boot runs as an EFI payload it needs to avoid setting up the CPU again. Also U-Boot currently does not handle interrupts for many devices, so run with interrupts disabled. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Add support for passing tables into U-BootSimon Glass2015-08-05-1/+20
| | | | | | | | | | | | The EFI stub provides information to U-Boot in a table. This includes the memory map which is needed to decide where to relocate U-Boot. Collect this information in the early init code and store it in global_data. Fix up the BIST code at the same time since we don't have it when booting from EFI and can assume it is 0. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* efi: Add 64-bit payload supportSimon Glass2015-08-05-1/+65
| | | | | | | | | | | | Most EFI implementations use 64-bit. Add a way to build U-Boot as a 64-bit EFI payload. The payload unpacks a (32-bit) U-Boot and starts it. This can be enabled for x86 boards at present. Signed-off-by: Simon Glass <sjg@chromium.org> Improvements to how the payload is built: Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Add a way to call 32-bit code from 64-bit modeSimon Glass2015-08-05-0/+79
| | | | | | | | | The procedure to drop from 64-bit mode to 32-bit is a bit messy. Add a function to take care of it. It requires identity-mapped pages and that the calling code is running below 4GB. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Add an enum for some commonly-used GDT bitsSimon Glass2015-08-05-0/+18
| | | | | | | | Rather than add these as open-coded values, create an enum with the commonly used flags. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Support building the EFI stubSimon Glass2015-08-05-1/+25
| | | | | | | | Add support for building a 32/64-bit EFI stub for x86. This involves building the startup and relocation code for either i386 or x86_64. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* efi: Add support for loading U-Boot through an EFI stubSimon Glass2015-08-05-0/+7
| | | | | | | | | | | | | | | | | | | | It is useful to be able to load U-Boot onto a board even if is it already running EFI. This can allow access to the U-Boot command interface, flexible booting options and easier development. The easiest way to do this is to build U-Boot as a binary blob and have an EFI stub copy it into RAM. Add support for this feature, targeting 32-bit initially. Also add a way to detect when U-Boot has been loaded via a stub. This goes in common.h since it needs to be widely available so that we avoid redoing initialisation that should be skipped. Signed-off-by: Simon Glass <sjg@chromium.org> Improvements to how the payload is built: Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Add relocation and link script for a 64-bit EFI applicationSimon Glass2015-08-05-0/+149
| | | | | | | | | | Add a linker script and relocation code for building 64-bit EFI applications. This can be used for the EFI stub. Signed-off-by: Simon Glass <sjg@chromium.org> Improvements to how the payload is built: Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Allow relocation code to build without text baseSimon Glass2015-08-05-6/+11
| | | | | | | | | This code currently requires CONFIG_SYS_TEXT_BASE but this should be unnecessary. As a first step, remove the build-time limitation and report an error instead. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: dts: Add a device tree file for EFISimon Glass2015-08-05-0/+23
| | | | | | | | This contains just enough to bring up the serial UART. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Add EFI board codeBen Stoltz2015-08-05-0/+1
| | | | | | | | | | Add support for the efi-x86 board, which supports running U-Boot as an EFI 32-bit application. Signed-off-by: Ben Stoltz <stoltz@google.com> Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Add support for U-Boot as an EFI applicationBen Stoltz2015-08-05-0/+319
| | | | | | | | | | Add the required x86 glue code. This includes the initial start-up, relocation and jumping to efi_main(). We also need to avoid fiddling with interrupts. Signed-off-by: Ben Stoltz <stoltz@google.com> Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Add asm/elf.h for x86-specific ELF definitionsSimon Glass2015-08-05-0/+46
| | | | | | | | Bring in this file from Linux 4.1. It supports relocation features specific to x86. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Support skipping relocation for EFISimon Glass2015-08-05-0/+6
| | | | | | | | When running as an EFI application we must skip relocation. Add support for this in the x86 relocation code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Set up toolchain flags for running as EFI applicationBen Stoltz2015-08-05-3/+27
| | | | | | | | | | Adjust the toolchain flags to build U-Boot as a relocatable shared library, as required by EFI. Signed-off-by: Ben Stoltz <stoltz@google.com> Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
* efi: Add start-up library codeSimon Glass2015-08-05-57/+2
| | | | | | | | | | | When running as an EFI application, U-Boot must request memory from EFI, and provide access to the boot services U-Boot needs. Add library code to perform these tasks. This includes efi_main() which is the entry point from EFI. U-Boot is built as a shared library. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Allow use of global_data with EFISimon Glass2015-08-05-0/+7
| | | | | | | | | | | | | | | On x86 the global_data pointer is provided through a somewhat-bizarre and x86-specific mechanism: the F segment register is set to a pointer to the start of global_data, so that accesses can use this build-in register. When running as an EFI application we don't want to mess with the Global Descriptor Table (GDT) and there is little advantage (in terms of code size) to doing so. Allow global_data to be a simple variable in this case. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Tidy up a few minor issues with interruptsSimon Glass2015-08-05-5/+4
| | | | | | | | Fix a typo, remove an unused field and make sure to use existing #define constants instead of open-coded values. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Add some missing global_data declarations in files that use gdSimon Glass2015-08-05-0/+10
| | | | | | | Some files use global_data but don't declare it. Fix this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Tidy up the 64-bit calling codeSimon Glass2015-08-05-2/+2
| | | | | | | | The GDT works but technically the length is incorrect. Fix this and add a comment. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Drop unused copy_fdt_to_ram()Simon Glass2015-08-05-19/+0
| | | | | | | | This is now handled by generic U-Boot code so we do not need an x86 version. It is no-longer called, so remove it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Tidy up global_data flagsSimon Glass2015-08-05-7/+11
| | | | | | | | | | These flags now overlap some global ones. Adjust the x86-specific flags to avoid this. Since this requires a change to the start.S code, add a way for tools to find the 32-bit cold reset entry point. Previously this was at a fixed offset. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Use CR0 constants in CPU initSimon Glass2015-08-05-1/+1
| | | | | | | We should use these constants where possible. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Add various minor tidy-ups to the 32-bit startup codeSimon Glass2015-08-05-20/+26
| | | | | | | | Fix a typo, improve some comments and add a little more detail in some cases. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: bayleybay: Configure PCI IRQBin Meng2015-08-05-0/+71
| | | | | | | | Add PCI IRQ routing information in the board device tree and enable writing PIRQ routing table and MP table. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Add Intel Bayley Bay board supportBin Meng2015-08-05-1/+136
| | | | | | | | Intel Bayley Bay board is a BayTrail based board. Add this board with existing baytrail fsp support. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Add microcode for BayTrail-I B0 steppingBin Meng2015-08-05-0/+4244
| | | | | | | | This commit adds the microcode blob for BayTrail-I B0 stepping, CPUID signature 30671h. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: baytrail: Update UPD setting for FSP Gold4 releaseBin Meng2015-08-05-1/+2
| | | | | | | | BayTrail FSP Gold4 release adds one UPD parameter to control IGD enable/disable. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: qemu: Add MP initializationBin Meng2015-08-05-0/+14
| | | | | | | | | Add a cpu1 node to the device tree and enable the MP initialization on QEMU targets (i440fx and q35). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
* x86: Add a 'pause' instruction in __udelay() for QEMU targetMiao Yan2015-08-05-0/+8
| | | | | | | | | | | | | | | | When running SMP configuration on QEMU (tcg mode, no kvm), there is a busy loop in start_aps(), calling udelay(), that waits for APs to show up online. However, there is a chance that VCPU1 will be timeout waiting, IOW the secondary VCPUs haven't started their execution yet. This patch adds a 'pause' instruction in __udelay() only for QEMU target, to give other VCPUs a chance to run. When QEMU sees the 'pause' instruction, it will yeild the execution to other CPUs. Signed-off-by: Miao Yan <yanmiaobest@gmail.com> Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
* x86: Reserve PCIe ECAM address range in the E820 tableBin Meng2015-07-28-1/+20
| | | | | | | | We should mark PCIe ECAM address range in the E820 table as reserved otherwise kernel will not attempt to use ECAM. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: qemu: Turn on PCIe ECAM address range decoding on Q35Bin Meng2015-07-28-0/+8
| | | | | | | Turn on PCIe ECAM address range decoding on Q35. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: qemu: Enable writing MP tableBin Meng2015-07-28-3/+55
| | | | | | | Enable writing MP table for QEMU boads (i440fx and q35). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Allow cpu-x86 driver to be probed for UPBin Meng2015-07-28-0/+9
| | | | | | | | Currently cpu-x86 driver is probed only for SMP. We add the same support for UP when there is only one cpu node in the deive tree. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: qemu: Enable I/O APIC chip select on PIIX3Bin Meng2015-07-28-2/+11
| | | | | | | | The PIIX3 chipset does not integrate an I/O APIC, instead it supports connecting to an external I/O APIC which needs to be enabled manually. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: mpspec: Move writing ISA interrupt entry after PCIBin Meng2015-07-28-5/+21
| | | | | | | | | | On some platforms the I/O APIC interrupt pin#0-15 may be connected to platform pci devices' interrupt pin. In such cases the legacy ISA IRQ is not available so we should not write ISA interrupt entry if it is already occupied. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: mpspec: Allow platform to determine how PIRQ is connected to I/O APICBin Meng2015-07-28-7/+34
| | | | | | | | | Currently during writing MP table I/O interrupt assignment entry, we assume the PIRQ is directly mapped to I/O APIC INTPIN#16-23, which however is not always the case on some platforms. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Convert to use driver model pci on queensbay/crownbayBin Meng2015-07-28-53/+5
| | | | | | Move to driver model pci for Intel queensbay/crownbay. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
* x86: pci: Do not assign irq 0 to pci deviceBin Meng2015-07-28-0/+2
| | | | | | | IRQ 0 is reserved and should not be assigned to pci device. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: pci: Assign pci irqs to all functionsBin Meng2015-07-28-14/+19
| | | | | | | | We need walk through all functions within a PCI device and assign their IRQs accordingly. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Enable DM RTC support for all x86 boardsBin Meng2015-07-28-9/+31
| | | | | | | | Add a RTC node in the device tree to enable DM RTC support. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> (Squashed in 'x86: Fix RTC build error on ivybridge')
* x86: Change pci option rom area MTRR setting to cacheableBin Meng2015-07-28-7/+22
| | | | | | | Turn on cache on the pci option rom area to improve the performance. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Simplify architecture defined exception handling in irq_llsr()Bin Meng2015-07-28-105/+46
| | | | | | | | | | | | Instead of using switch..case for architecture defined exceptions, simply unify the handling by printing a message of exception name, followed by registers dump then halt the CPU. With this unification, it also fixes the wrong exception numbers for #MF/#AC/#MC/#XM which should be 16/17/18/19 not 15/16/17/18. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Display correct CS/EIP/EFLAGS when there is an error codeBin Meng2015-07-28-4/+65
| | | | | | | | | Some exceptions cause an error code to be saved on the current stack after the EIP value. We should extract CS/EIP/EFLAGS from different position on the stack based on the exception number. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.1 at 2024-11-13 17:55:42 +0000