summaryrefslogtreecommitdiff
path: root/arch/x86
Commit message (Collapse)AuthorAgeLines
* x86: coreboot: Configure pci memory regionsBin Meng2015-01-13-2/+28
| | | | | | | | Configure coreboot pci memory regions so that pci device drivers could work correctly. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Make chromebook_link the default board for corebootBin Meng2015-01-13-219/+217
| | | | | | | | | | | | | | | Change SYS_CONFIG_NAME and DEFAULT_DEVICE_TREE to chromebook_link which is currently the only real board officially supported to run U-Boot loaded by coreboot. Note the symbolic link file chromebook_link.dts is deleted and link.dts is renamed to chromebook_link.dts. To avoid multiple definition of video_hw_init, the CONFIG_VIDEO_X86 define needs to be moved to arch/x86/cpu/ivybridge/Kconfig. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: coreboot: Move coreboot-specific defines from coreboot.h to KconfigBin Meng2015-01-13-0/+17
| | | | | | | | | | | | There are many places in the U-Boot source tree which refer to CONFIG_SYS_COREBOOT, CONFIG_CBMEM_CONSOLE and CONFIG_VIDEO_COREBOOT that is currently defined in coreboot.h. Move them to arch/x86/cpu/coreboot/Kconfig so that we can switch to board configuration file to build U-Boot later. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Hide ROM chip size when CONFIG_X86_RESET_VECTOR is not selectedBin Meng2015-01-13-0/+2
| | | | | | | | When CONFIG_X86_RESET_VECTOR is not selected, specifying the ROM chip size is meaningless, hence hide it. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Move CONFIG_X86_RESET_VECTOR and CONFIG_SYS_X86_START16 to KconfigBin Meng2015-01-13-0/+9
| | | | | | | | Convert CONFIG_X86_RESET_VECTOR and CONFIG_SYS_X86_START16 to Kconfig options so that we can remove them from board configuration file. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Allow a hardcoded TSC frequency provided by KconfigBin Meng2015-01-13-2/+26
| | | | | | | | | | | | | | By default U-Boot automatically calibrates TSC running frequency via MSR and PIT. The calibration may not work on every x86 processor, so a new Kconfig option CONFIG_TSC_CALIBRATION_BYPASS is introduced to allow bypassing the calibration and assign a hardcoded TSC frequency CONFIG_TSC_FREQ_IN_MHZ. Normally the bypass should be turned on in a simulation environment like qemu. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: coreboot: Set up timer base correctlyBin Meng2015-01-13-13/+20
| | | | | | | | | | | | | | If coreboot is built with CONFIG_COLLECT_TIMESTAMPS, use the value of base_time in coreboot's timestamp table as our timer base, otherwise TSC counter value will be used. Sometimes even coreboot is built with CONFIG_COLLECT_TIMESTAMPS, the value of base_time in the timestamp table is still zero, so we must exclude this case too (this is currently seen on booting coreboot in qemu). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: fsp: Drop get_hob_type() and get_hob_length()Bin Meng2015-01-13-44/+14
| | | | | | | | | | | These two are not worth having separate inline functions as they are really simple, so drop them. Also changed 'type' parameter of fsp_get_next_hob() from u16 to uint. Suggested-by: Simon Glass <sjg@chromium.org> Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Add an 'mtrr' command to list and adjust MTRRsSimon Glass2015-01-13-0/+139
| | | | | | | | | | | | | It is useful to be able to see the MTRR setup in U-Boot. Add a command to list the state of the variable MTRR registers and allow them to be changed. Update the documentation to list some of the available commands. This does not support fixed MTRRs as yet. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Bin Meng <bmeng.cn@gmail.com>
* x86: ivybridge: Update microcode early in bootSimon Glass2015-01-13-13/+40
| | | | | | | | | | | At present the normal update (which happens much later) does not work. This seems to have something to do with the 'no eviction' mode in the CAR, or at least moving the microcode update after that causes it not to work. For now, do an update early on so that it definitely works. Also refuse to continue unless the microcode update check (later in boot) is successful. Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: Disable CAR before relocation on platforms that need itSimon Glass2015-01-13-0/+8
| | | | | | | For platforms with CAR we should disable it before relocation. Check if this function is available and call it if so. Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: ivybridge: Add a way to turn off the CARSimon Glass2015-01-13-0/+46
| | | | | | | Cache-as-RAM should be turned off when we relocate since we want to run from RAM. Add a function to perform this task. Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: Commit the current MTRRs before relocationSimon Glass2015-01-13-0/+8
| | | | | | | | Once we stop running from ROM we should set up the MTTRs to speed up execution. This is only needed for platforms that don't have an FSP. Also in the Coreboot case, the MTRRs are set up for us. Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: ivybridge: Request MTRRs for DRAM regionsSimon Glass2015-01-13-0/+10
| | | | | | | | | We should use MTRRs to speed up execution. Add a list of MTRR requests which will dealt with when we relocate and run from RAM. We set RAM as cacheable (with write-back) and registers as non-cacheable. Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: ivybridge: Set up an MTRR for the video frame bufferSimon Glass2015-01-13-0/+7
| | | | | | | Set the frame buffer to write-combining. This makes it faster, although for scrolling write-through is even faster for U-Boot. Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: Add support for MTRRsSimon Glass2015-01-13-101/+187
| | | | | | | | | | | | | | Memory Type Range Registers are used to tell the CPU whether memory is cacheable and if so the cache write mode to use. Clean up the existing header file to follow style, and remove the unneeded code. These can speed up booting so should be supported. Add these to global_data so they can be requested while booting. We will apply the changes during relocation (in a later commit). Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: ivybridge: Drop support for ROM cachingSimon Glass2015-01-13-25/+0
| | | | | | | | | | This is set up along with CAR (Cache-as-RAM) anyway. When we relocate we don't really need ROM caching (we read the VGA BIOS from ROM but that is about it) Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: Tidy up VESA mode numbersSimon Glass2015-01-13-4/+7
| | | | | | | There are some bits which should be ignored when displaying the mode number. Make sure that they are not included in the mode that is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: Use cache, don't clear the display in video BIOSSimon Glass2015-01-13-3/+2
| | | | | | | There is no need to run with the cache disabled, and there is no point in clearing the display frame buffer since U-Boot does it later. Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: ivybridge: Only run the Video BIOS when video is enabledSimon Glass2015-01-13-1/+8
| | | | | | | | | | | | This takes about about 700ms on link when running natively and 900ms when running using the emulator. It is a waste of time if video is not enabled, so don't bother running the video BIOS in that case. We could add a command to run the video BIOS later when needed, but this is not considered at present. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Drop RAMTOP KconfigSimon Glass2015-01-13-12/+0
| | | | | | | We don't need this in U-Boot since we calculate it based on available memory. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Correct XIP_ROM_SIZESimon Glass2015-01-13-1/+1
| | | | | | | This should default to the size of the ROM for faster execution before relocation. Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: crownbay: Add pci devices in the dts fileBin Meng2015-01-13-0/+81
| | | | | | | | | | | | | The Topcliff PCH has 4 UART devices integrated (Device 10, Funciton 1/2/3/4). Add the corresponding device nodes in the crownbay.dts per Open Firmware PCI bus bindings. Also a comment block is added for the 'stdout-path' property in the chosen node, mentioning that by default the legacy superio serial port (io addr 0x3f8) is still used on Crown Bay as the console port. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Use ePAPR defined properties for x86-uartBin Meng2015-01-13-3/+2
| | | | | | | | | Use ePAPR defined properties for x86-uart: clock-frequency and current-speed. Assign the value of clock-frequency in device tree to plat->clock of x86-uart instead of using hardcoded number. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Simplify the fsp hob access functionsBin Meng2015-01-12-100/+101
| | | | | | | | | Remove the troublesome union hob_pointers so that some annoying casts are no longer needed in those hob access routines. This also improves the readability. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* pci: Make pci apis usable before relocationBin Meng2015-01-12-6/+5
| | | | | | | | | | | | | | Introduce a gd->hose to save the pci hose in the early phase so that apis in drivers/pci/pci.c can be used before relocation. Architecture codes need assign a valid gd->hose in the early phase. Some variables are declared as static so change them to be either stack variable or global data member so that they can be used before relocation, except the 'indent' used by CONFIG_PCI_SCAN_SHOW which just affects some print format. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Support pci bus scan in the early phaseBin Meng2015-01-12-0/+1
| | | | | | | | | On x86, some peripherals on pci buses need to be accessed in the early phase (eg: pci uart) with a valid pci memory/io address, thus scan the pci bus and do the corresponding resource allocation. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Add missing DECLARE_GLOBAL_DATA_PTR for pci.cBin Meng2015-01-12-0/+2
| | | | | | | | arch/x86/cpu/pci.c has access to the U-Boot global data thus DECLARE_GLOBAL_DATA_PTR is needed. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Clean up the board dts filesBin Meng2015-01-12-24/+7
| | | | | | | | | | | | | | | | This commits cleans up the board dts files. - Correct the serial port register size to 8 - Remove the misleading status = "disabled" statement in the serial.dtsi - Move the inclusion of skeleton.dtsi from serial.dtsi to board dts files - Let the board dts file define stdout-path in the chosen node - Remove device nodes in board dts files thar are duplicated to skeleton.dtsi Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Rename coreboot.dsti to serial.dtsiBin Meng2015-01-12-2/+2
| | | | | | | | The name of coreboot.dtsi is misleading, as it actually describes the legacy serial port device node. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Remove alex.dts in arch/x86/dtsBin Meng2015-01-12-25/+0
| | | | | | | No board is using alex.dts, so remove it. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Clean up the FSP support codesBin Meng2014-12-18-290/+279
| | | | | | | | | | | | | | | | | | | | | | | | | This is the follow-on patch to clean up the FSP support codes: - Remove the _t suffix on the structures defines - Use __packed for structure defines - Use U-Boot's assert() - Use standard bool true/false - Remove read_unaligned64() - Use memcmp() in the compare_guid() - Remove the cast in the memset() call - Replace some magic numbers with macros - Use panic() when no valid FSP image header is found - Change some FSP utility routines to use an fsp_ prefix - Add comment blocks for asm_continuation and fsp_init_done - Remove some casts in find_fsp_header() - Change HOB access macros to static inline routines - Add comments to mention find_fsp_header() may be called in a stackless environment - Add comments to mention init(&params) in fsp_init() cannot be removed Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Rename coreboot-serial to x86-serialBin Meng2014-12-18-1/+1
| | | | | Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: crownbay: Add SDHCI supportBin Meng2014-12-18-1/+48
| | | | | | | | | There are two standard SD card slots on the Crown Bay board, which are connected to the Topcliff PCH SDIO controllers. Enable the SDHC support so that we can use them. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: crownbay: Add SPI flash supportBin Meng2014-12-18-1/+40
| | | | | | | | | The Crown Bay board has an SST25VF016B flash connected to the Tunnel Creek processor SPI controller used as the BIOS media where U-Boot is stored. Enable this flash support. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Use consistent name XXX_ADDR for binary blob flash addressBin Meng2014-12-18-5/+5
| | | | | Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Add queensbay and crownbay Kconfig filesBin Meng2014-12-18-0/+92
| | | | | Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Enable the queensbay cpu directory buildBin Meng2014-12-18-0/+1
| | | | | Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: ich6-gpio: Add Intel Tunnel Creek GPIO supportBin Meng2014-12-18-2/+15
| | | | | | | | | | | | Intel Tunnel Creek GPIO register block is compatible with current ich6-gpio driver, except the offset and content of GPIO block base address register in the LPC PCI configuration space are different. Use u16 instead of u32 to store the 16-bit I/O address of the GPIO registers so that it could support both Ivybridge and Tunnel Creek. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Convert microcode format to device-tree-onlySimon Glass2014-12-18-7/+11
| | | | | | | | | | To avoid having two microcode formats, adjust the build system to support obtaining the microcode from the device tree, even in the case where it must be made available before the device tree can be accessed. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Add basic support to queensbay platform and crownbay boardBin Meng2014-12-18-0/+326
| | | | | | | | | | | Implement minimum required functions for the basic support to queensbay platform and crownbay board. Currently the implementation is to call fsp_init() in the car_init(). We may move that call to cpu_init_f() in the future. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Integrate Tunnel Creek processor microcodeBin Meng2014-12-18-0/+368
| | | | | | | | Integrate the processor microcode version 1.05 for Tunnel Creek, CPUID device 20661h. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Correct problems in the microcode loadingSimon Glass2014-12-18-10/+15
| | | | | | | | | | | | | There are several problems in the code. The device tree decode is incorrect in ways that are masked due to a matching bug. Both are fixed. Also microcode_read_rev() should be inline and called before the microcode is written. Note: microcode writing does not work correctly on ivybridge for me. Further work is needed to resolve this. But this patch tidies up the existing code so that will be easier. Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: ivybridge: Update the microcodeSimon Glass2014-12-18-1374/+1504
| | | | | | | | There are new microcode revisions available. Update them. Also change the format so that the first 48 bytes are not omitted from the device tree data. Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: Move microcode updates into a separate directorySimon Glass2014-12-18-2/+2
| | | | | | | We might end up with a few of these, so put them in their own directory. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: move arch-specific asmlinkage to <asm/linkage.h>Masahiro Yamada2014-12-15-1/+11
| | | | | | | | | | | | | | | | | | Commit 65dd74a674d6 (x86: ivybridge: Implement SDRAM init) introduced x86-specific asmlinkage into arch/x86/include/asm/config.h. Commit ed0a2fbf14f7 (x86: Add a definition of asmlinkage) added the same macro define again, this time, into include/common.h. (Please do not add arch-specific stuff to include/common.h any more; it is already too cluttered.) The generic asmlinkage is defined in <linux/linkage.h>. If you want to override it with an arch-specific one, the best way is to add it to <asm/linkage.h> like Linux Kernel. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
* x86: Add a simple command to show FSP HOB informationBin Meng2014-12-13-0/+68
| | | | | | | | | | | | | | FSP builds a series of data structures called the Hand-Off-Blocks (HOBs) as it progresses through initializing the silicon. These data structures conform to the HOB format as described in the Platform Initialization (PI) specification Volume 3 Shared Architectual Elements specification, which is part of the UEFI specification. Create a simple command to parse the HOB list to display the HOB address, type and length in bytes. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Support Intel FSP initialization path in start.SBin Meng2014-12-13-0/+20
| | | | | | | | | | | | | | | | | Per Intel FSP architecture specification, FSP provides 3 routines for bootloader to call. The first one is the TempRamInit (aka Cache-As-Ram initialization) and the second one is the FspInit which does the memory bring up (like MRC for other x86 targets) and chipset initialization. Those two routines have to be called before U-Boot jumping to board_init_f in start.S. The FspInit() will return several memory blocks called Hand Off Blocks (HOBs) whose format is described in Platform Initialization (PI) specification (part of the UEFI specication) to the bootloader. Save this HOB address to the U-Boot global data for later use. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Add post failure codes for bist and carBin Meng2014-12-13-0/+3
| | | | | Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: queensbay: Adapt FSP support codesBin Meng2014-12-13-18/+28
| | | | | | | Use inline assembly codes to call FspNotify() to make sure parameters are passed on the stack as required by the FSP calling convention. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
generated by cgit v1.1 at 2024-07-16 11:56:38 +0000