summaryrefslogtreecommitdiff
path: root/arch/x86
Commit message (Collapse)AuthorAgeLines
...
* x86: Initial import from Intel FSP release for Queensbay platformBin Meng2014-12-13-0/+1522
| | | | | | | | | | | | | | This is the initial import from Intel FSP release for Queensbay platform (Tunnel Creek processor and Topcliff Platform Controller Hub), which can be downloaded from Intel website. For more details, check http://www.intel.com/fsp. Note: U-Boot coding convention was applied to these codes, so it looks completely different from the original Intel release. Also update FSP support codes license header to use SPDX ID. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Add a simple superio driver for SMSC LPC47MBin Meng2014-12-13-0/+90
| | | | | | | | | On most x86 boards, the legacy serial ports (io address 0x3f8/0x2f8) are provided by a superio chip connected to the LPC bus. We must program the superio chip so that serial ports are available for us. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Add Intel Crown Bay board dts fileBin Meng2014-12-13-1/+55
| | | | | Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: ich6-gpio: Move setup_pch_gpios() to board support codesBin Meng2014-12-13-0/+7
| | | | | | | | | Movie setup_pch_gpios() in the ich6-gpio driver to the board support codes, so that the driver does not need to know any platform specific stuff (ie: include the platform specifc chipset header file). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Clean up asm-offsetsBin Meng2014-12-13-2/+3
| | | | | | | | | Move GD_BIST from lib/asm-offsets.c to arch/x86/lib/asm-offsets.c as it is x86 arch specific stuff. Also remove GENERATED_GD_RELOC_OFF which is not referenced anymore. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Make ROM_SIZE configurable in KconfigBin Meng2014-12-13-1/+77
| | | | | | | | | | Currently the ROM_SIZE is hardcoded to 8MB in arch/x86/Kconfig. This will not be the case when adding additional board support. Hence we make ROM_SIZE configurable (512KB/1MB/2MB/4MB/8MB/16MB) and have the board Kconfig file select the default ROM_SIZE. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* Replace <compiler.h> with <linux/compiler.h>Masahiro Yamada2014-12-08-6/+7
| | | | | | Including <linux/compiler.h> is enough for general use. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* Kbuild: introduce Makefile in arch/$ARCH/Daniel Schwierzeck2014-12-08-0/+12
| | | | | | | | | | | | | | | Introduce a Makefile under arch/$ARCH/ and include it in the top Makefile (similar to Linux kernel). This allows further refactoringi like moving architecture-specific code out of global makefiles, deprecating config variables (CPU, CPUDIR, SOC) or deprecating arch/$ARCH/config.mk. In contrary to Linux kernel, U-Boot defines the ARCH variable by Kconfig, thus the arch Makefile can only included conditionally after the top config.mk. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Acked-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* x86: dts: Add video information to the device treeSimon Glass2014-11-25-0/+13
| | | | | | This provides panel timing information needed by the video driver. Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: Add initial video device init for Intel GMASimon Glass2014-11-25-1/+927
| | | | | | | | | Intel's Graphics Media Accelerator (GMA) is a generic name for a wide range of video devices. Add code to set up the hardware on ivybridge. Part of the init happens in native code, part of it happens in a 16-bit option ROM for those nostalgic for the 1970s. Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: Add support for running option ROMs nativelySimon Glass2014-11-25-0/+946
| | | | | | | | On x86 machines we can use an emulator to run option ROMS as with other architectures. But with some additional effort (mostly due to the 16-bit nature of option ROMs) we can run them natively. Add support for this. Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: Add vesa mode configuration optionsSimon Glass2014-11-25-0/+149
| | | | | | Add Kconfig options to allow selection of a vesa mode on x86 machines. Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: Add GDT descriptors for option ROMsSimon Glass2014-11-25-22/+18
| | | | | | | Option ROMs require a few additional descriptors. Add these, and remove the enum since we now have to access several descriptors from assembler. Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: ivybridge: Add northbridge init functionsSimon Glass2014-11-25-1/+207
| | | | | | Add init for the northbridge, another part of the platform controller hub. Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: Drop some msr functions that we don't supportSimon Glass2014-11-25-11/+0
| | | | | | These are not available in U-Boot as yet, so drop them. Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: Add init for model 206AX CPUSimon Glass2014-11-25-0/+526
| | | | | | Add the setup code for the CPU so that it can be used at full speed. Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: Add LAPIC setup codeSimon Glass2014-11-25-2/+181
| | | | | | | Add code to set up the Local Advanced Peripheral Interrupt Controller. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Drop old CONFIG_INTEL_CORE_ARCH codeSimon Glass2014-11-25-28/+0
| | | | | | | This is no-longer used, so drop it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Refactor interrupt_init()Bin Meng2014-11-25-14/+23
| | | | | | | | | | | Rename interrupt_init() in arch/x86/lib/pcat_interrupts.c to i8259_init() and create a new interrupt_init() in arch/x86/cpu/interrupt.c to call i8259_init() followed by a call to cpu_init_interrupts(). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
* x86: Remove cpu_init_r() for x86Bin Meng2014-11-25-8/+0
| | | | | | | | | Since cpu_init_interrupts() was moved out of cpu_init_r(), it is useless to keep cpu_init_r() for x86, thus remove it. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
* x86: Call cpu_init_interrupts() from interrupt_init()Bin Meng2014-11-25-2/+3
| | | | | | | | | | | | | Currently cpu_init_interrupts() is called from cpu_init_r() to setup the interrupt and exception of the cpu core, but at that time the i8259 has not been initialized to mask all the irqs and remap the master i8259 interrupt vector base, so the whole system is at risk of being interrupted, and if interrupted, wrong interrupt/exception message is shown. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
* x86: Add Intel speedstep and turbo mode codeSimon Glass2014-11-25-0/+219
| | | | | | | Intel chips have a turbo mode where they can run faster for a short period until they reach thermal limits. Add code to adjust and query this feature. Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: ivybridge: Set up XHCI USBSimon Glass2014-11-25-0/+34
| | | | | | Add init for XHCI so that high-speed USB can be used. Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: ivybridge: Set up EHCI USBSimon Glass2014-11-25-0/+33
| | | | | | Add init for EHCI so that USB can be used. Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: dts: Add SATA settings for linkSimon Glass2014-11-25-0/+7
| | | | | | Add the requires settings to enable SATA on link. Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: ivybridge: Add SATA initSimon Glass2014-11-25-0/+306
| | | | | | Add code to set up the SATA interfaces on boot. Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: dts: Add LPC settings for linkSimon Glass2014-11-25-0/+8
| | | | | | Add some settings required to set up the LPC correctly. Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: dts: Move PCI peripherals into a pci nodeSimon Glass2014-11-25-13/+15
| | | | | | | | These peripherals should not be at the top level, since they exist inside the PCI bus. We don't have a full device tree node for pci yet, but we should at least put it at the right level. Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: ivybridge: Add additional LPC initSimon Glass2014-11-25-1/+528
| | | | | | | Set up all the remaining pieces of the LPC (low-pin-count) peripheral in PCH (Peripheral Controller Hub). Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: ivybridge: Add PCH initSimon Glass2014-11-25-0/+173
| | | | | | Add required init for the Intel Platform Controller Hub in ivybridge. Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: Add a simple header file for ACPISimon Glass2014-11-25-0/+24
| | | | | | | We don't use many features yet, so this only has a few declarations. It will be expanded as needed. Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: ivybridge: Add support for BD82x6x PCHSimon Glass2014-11-25-0/+167
| | | | | | Add basic setup for the PCH. Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: Set up edge triggering on interrupt 9Simon Glass2014-11-25-0/+49
| | | | | | | Add this additional init in case it is needed by the OS. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: pci: Add handlers before and after a PCI hose scanSimon Glass2014-11-25-0/+15
| | | | | | | | Some boards will want to do some setup before and after a PCI hose is scanned. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Add ioapic.h headerSimon Glass2014-11-25-0/+38
| | | | | | Add definitions for the I/O Advanced Peripheral Interrupt Controller. Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: Factor out common values in the link scriptSimon Glass2014-11-25-7/+12
| | | | | | | | | Define the reset base in config.mk so that it does not need to be calculated twice in the link script. Also tidy up the START_16 and RESET_VEC_LOC values to fit with this new approach. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Ensure that all relocation data is included in the imageSimon Glass2014-11-25-1/+3
| | | | | | | | | Some toolchains put the relocation data into separate sections. Adjust the linker script to catch this case. Without relocation data, U-Boot will not boot. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Panic if there is no relocation dataSimon Glass2014-11-25-0/+3
| | | | | | | | | This normally indicates a problem which will prevent relocation from functioning, resulting in a hang. Panic in this case to make it easier to debug. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Remove board_early_init_r()Simon Glass2014-11-25-11/+0
| | | | | | | | This function is not needed. Remove it to improve the generic init sequence slightly. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Add ivybridge directory to MakefileSimon Glass2014-11-25-0/+2
| | | | | | | It is now required to add subdirectories in the x86 cpu Makefile. Add this to fix a build breakage for chromebook_link. Signed-off-by: Simon Glass <sjg@chromium.org>
* Merge git://git.denx.de/u-boot-x86Tom Rini2014-11-24-175/+6391
|\ | | | | | | | | | | | | Conflicts: arch/x86/cpu/Makefile Signed-off-by: Tom Rini <trini@ti.com>
| * x86: Rename chromebook-x86 to corebootSimon Glass2014-11-21-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Rename this vendor since it is intended to be used on any platform where coreboot runs at reset and then loads U-Boot. So far it is only tested on link. When other boards are supported it is likely that we will need to move to multiple board names, all under the 'coreboot' vendor. So while it would be possible to remove the vendor for now, that would be short-sighted. Suggested-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Simon Glass <sjg@chromium.org>
| * x86: ivybridge: Implement SDRAM initSimon Glass2014-11-21-5/+1861
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Implement SDRAM init using the Memory Reference Code (mrc.bin) provided in the board directory and the SDRAM SPD information in the device tree. This also needs the Intel Management Engine (me.bin) to work. Binary blobs everywhere: so far we have MRC, ME and microcode. SDRAM init works by setting up various parameters and calling the MRC. This in turn does some sort of magic to work out how much memory there is and the timing parameters to use. It also sets up the DRAM controllers. When the MRC returns, we use the information it provides to map out the available memory in U-Boot. U-Boot normally moves itself to the top of RAM. On x86 the RAM is not generally contiguous, and anyway some RAM may be above 4GB which doesn't work in 32-bit mode. So we relocate to the top of the largest block of RAM we can find below 4GB. Memory above 4GB is accessible with special functions (see physmem). It would be possible to build U-Boot in 64-bit mode but this wouldn't necessarily provide any more memory, since the largest block is often below 4GB. Anyway U-Boot doesn't need huge amounts of memory - even a very large ramdisk seldom exceeds 100-200MB. U-Boot has support for booting 64-bit kernels directly so this does not pose a limitation in that area. Also there are probably parts of U-Boot that will not work correctly in 64-bit mode. The MRC is one. There is some work remaining in this area. Since memory init is very slow (over 500ms) it is possible to save the parameters in SPI flash to speed it up next time. Suspend/resume support is not fully implemented, or at least it is not efficient. With this patch, link boots to a prompt. Signed-off-by: Simon Glass <sjg@chromium.org>
| * x86: ivybridge: Add LAPIC supportSimon Glass2014-11-21-0/+163
| | | | | | | | | | | | | | | | The local advanced programmable interrupt controller is not used much in U-Boot but we do need to set it up. Add basic support for this, which will be extended as needed. Signed-off-by: Simon Glass <sjg@chromium.org>
| * x86: Make show_boot_progress() commonSimon Glass2014-11-21-24/+24
| | | | | | | | | | | | | | This function can probably be used on all x86 boards, so move it into the common file. Signed-off-by: Simon Glass <sjg@chromium.org>
| * x86: chromebook_link: Enable GPIO supportSimon Glass2014-11-21-0/+3
| | | | | | | | | | | | | | Enable GPIO support and provide the required GPIO setup information to the driver. Signed-off-by: Simon Glass <sjg@chromium.org>
| * x86: ivybridge: Add support for early GPIO initSimon Glass2014-11-21-6/+158
| | | | | | | | | | | | | | | | | | | | | | | | | | | | When not relying on Coreboot for GPIO init the GPIOs must be set up correctly. This is currently done statically through a rather ugly method. As the GPIOs are figured out they can be moved to the device tree and set up as needed rather than all at the start. In this implementation, board files should call ich_gpio_set_gpio_map() before the GPIO driver is used in order to provide the GPIO information. We use the early PCI interface so that this driver can now be used before relocation. Signed-off-by: Simon Glass <sjg@chromium.org>
| * x86: ivybridge: Add early init for PCH devicesSimon Glass2014-11-21-1/+524
| | | | | | | | | | | | | | Many PCH devices are hard-coded to a particular PCI address. Set these up early in case they are needed. Signed-off-by: Simon Glass <sjg@chromium.org>
| * x86: dts: Add microcode updates for ivybridge CPUSimon Glass2014-11-21-0/+1382
| | | | | | | | | | | | | | | | | | | | Add two microcode updates that are provided for this CPU. The updates have been converted to a device tree form. Note: SPDX submission has been done. If this license is approved I will convert the files to use SPDX. Signed-off-by: Simon Glass <sjg@chromium.org>
| * x86: ivybridge: Perform Intel microcode update on bootSimon Glass2014-11-21-0/+177
| | | | | | | | | | | | | | Microcode updates are stored in the device tree. Work through these and apply any that are needed. Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.1 at 2024-08-24 11:49:14 +0000