summaryrefslogtreecommitdiff
path: root/arch/x86/lib
Commit message (Collapse)AuthorAgeLines
* x86: Fix indirect jmp warning in zimage.cSimon Glass2012-12-06-3/+3
| | | | | | | | | | | | | | This fixes the following warning: zimage.c:312: Warning: indirect jmp without `*' Also fixed these warnings to keep checkpatch quiet: warning: arch/x86/lib/zimage.c,311: unnecessary whitespace before a quoted newline warning: arch/x86/lib/zimage.c,312: unnecessary whitespace before a quoted newline warning: arch/x86/lib/zimage.c,313: unnecessary whitespace before a quoted newline Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: Provide a function to clean up just before booting a zimageStefan Reinauer2012-12-06-0/+11
| | | | | | | | This function can be used by boards which want to do some clean-up before booting a zImage. Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: Add a CBMEM timestamp generated right before the kernel startup.Vadim Bendebury2012-12-06-0/+6
| | | | | | | | | | To maintain the initialization state of the timestamp facility, thesq pointer to the CBMEM section containing the timestamp table should be kept in the .data section (so that it is maintained across u-boot relocation). Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: Add function to read time stamp counterVadim Bendebury2012-12-06-0/+17
| | | | | | | | | | | Put this function in the u-boot-x86.h header file. We could instead create timer.h perhaps. We support setting a base time, and reading the time relative to this base. Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: Fix typo in pcat_timer.cStefan Reinauer2012-11-30-1/+1
| | | | | | | Fix a small comment typo. Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: Allow compiling out realmode/bios codeGabe Black2012-11-30-5/+10
| | | | | | | | We don't want this for coreboot, so provide a way of compiling it out. Signed-off-by: Gabe Black <gabeblack@chromium.org> Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: Remove duplicate PCI initGraeme Russ2012-11-28-3/+0
| | | | | Signed-off-by: Graeme Russ <graeme.russ@gmail.com> Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: Put global data on the stackGraeme Russ2012-11-28-37/+2
| | | | | | | | | | Putting global data on the stack simplifies the init process (and makes it slightly quicker). During the 'flash' stage of the init sequence, global data is in the CAR stack. After SDRAM is initialised, global data is copied from CAR to the SDRAM stack Signed-off-by: Graeme Russ <graeme.russ@gmail.com> Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: Forward declare gd_tGraeme Russ2012-11-28-1/+1
| | | | | | | | So it can be used as a type in struct global_data and remove an ugly typecast Signed-off-by: Graeme Russ <graeme.russ@gmail.com> Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Marek Vasut <marex@denx.de>
* serial: Remove CONFIG_SERIAL_MULTI from remaining sourcesMarek Vasut2012-10-15-2/+0
| | | | | | | | | | | | Remove the parts depending either on disabled CONFIG_SERIAL_MULTI or ifdefs around CONFIG_SERIAL_MULTI parts since CONFIG_SERIAL_MULTI is now enabled by default. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Stefan Roese <sr@denx.de>
* net: move bootfile init into eth_initializeMike Frysinger2012-05-15-15/+0
| | | | | | | | All arches init this the same way, so move the logic into the core net code to avoid duplicating it everywhere else. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
* net: punt bd->bi_ip_addrMike Frysinger2012-05-15-11/+0
| | | | | | | | | This field gets read in one place (by "bdinfo"), and we can replace that with getenv("ipaddr"). After all, the bi_ip_addr field is kept up-to-date implicitly with the value of the ipaddr env var. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
* x86: Convert board_init_f_r to a processing loopGraeme Russ2012-01-04-125/+168
| | | | | | | | | | | | | | Create an init function array for board_init_f_r - This finalises the migration to a purely array based initialisation mechanism Also tweak a few comments while we are at it so everything is 'correct' -- Changes for v2: - Renamed to a more apt name - Fix bug in set_reloc_flag_r - Re-instate gd->flags = boot_flags; in board_init_f - Added commit message
* x86: Split init functions out of board.cGraeme Russ2012-01-04-221/+357
| | | | | | This patch moves towards reducing board.c to simply a set of init cores for the three initialisation phases (Flash, Flash/RAM, and RAM), a set of three init function arrays and a init function array processing function
* x86: Move relocation code out of board.cGraeme Russ2012-01-04-67/+118
|
* x86: Move setup_pcat_compatibility() out of board.cGraeme Russ2012-01-04-7/+7
| | | | | | | | | This function simply does not belong in board.c -- Changes for v2: - Added commit message
* x86: Move do_go_exec() out of board.cGraeme Russ2012-01-04-27/+65
| | | | | | -- Changes for v2: - None
* CHECKPATCH: arch/x86/lib/*Graeme Russ2012-01-04-73/+122
|
* x86: Allow cache before copy to RAMGraeme Russ2012-01-04-5/+10
| | | | | | -- Changes for v2: - None
* x86: Create weak init_cache() and default enable_caches() functionsGraeme Russ2012-01-04-0/+1
| | | | | | -- Changes for v2: - Tweaked commit title
* x86: Set GD_FLG_RELOC after entering in-RAM copy of U-BootGraeme Russ2012-01-04-2/+2
| | | | | | -- Changes for v2: - None
* x86: Use fs for global dataGraeme Russ2012-01-04-17/+39
| | | | | | | | | | | | | | | | | | | | | | Use the base address of the 'F' segment as a pointer to the global data structure. By adding the linear address (i.e. the 'D' segment address) as the first word of the global data structure, the address of the global data relative to the 'D' segment can be found simply, for example, by: fs movl 0, %eax This makes the gd 'pointer' writable prior to relocation (by reloading the Global Desctriptor Table) which brings x86 into line with all other arches NOTE: Writing to the gd 'pointer' is expensive (but we only do it twice) but using it to access global data members (read and write) is still fairly cheap -- Changes for v2: - Rebased against changes made to patch #3 - Removed extra indent - Tweaked commit message
* x86: Rework relocation calculationsGraeme Russ2012-01-04-12/+11
| | | | | | | | | | This commit introduces no functional changes - It simply re-arranges the calculations so that adding to them in future commits will be cleaner -- Changes for v2: - Fixed typo in title - Added commit message
* x86: Simplify Flash-to-RAM code execution transitionGraeme Russ2012-01-04-3/+22
| | | | | | | | | | | Move the relocation offset calculation out of assembler and into C. This also paves the way for the upcoming init sequence simplification by adding the board_init_f_r flash to RAM transitional function -- Changes for v2: - Added commit message - Minor adjustment to new stack address comment
* x86: Speed up copy-to-RAM and clear BSS operationsGraeme Russ2012-01-04-12/+5
| | | | | | | | | The implementations of memcpy and memset are now the optimised versions from glibc, so use them instead of simple copy loops -- Changes for v2: - Removed unneeded brackets
* x86: Import glibc memcpy implementationGraeme Russ2012-01-02-0/+61
| | | | | | | | Taken from glibc version 2.14.90 -- Changes for v2: - None
* x86: Add support for specifying an initrd with the zboot commandGabe Black2011-12-19-4/+19
| | | | | | | | | | | This change finishes plumbing the initrd support built into the zboot mechanism out to the command interface. It also fixes a bug in the command declaration where the kernel size could be passed as an optional second parameter but not enough arguments were allowed. Signed-off-by: Gabe Black <gabeblack@chromium.org>
* x86: Refactor the zboot innards so they can be reused with a vboot imageGabe Black2011-12-19-87/+117
| | | | | | | | | | | | | | | If vboot successfully verifies a kernel, it will leave it in place and basically ready to boot. The zeropage table which is part of the x86 boot protocol is at the end of the kernel, though, instead of the beginning, and because the image is already in place there's no need to copy it around. This change refactors the code which implements the zboot command so that the configuration of the zeropage table and loading the pieces of the kernel into memory are done separately. Also, because the command line goes before the zeropage table in vboot which is somewhat incompatible with the normal protocol, where to put the command line is a now a parameter instead of being hard coded. Signed-off-by: Gabe Black <gabeblack@chromium.org>
* x86: Add support for booting Linux using the 32 bit boot protocolGabe Black2011-12-19-15/+55
| | | | | | | | | This change conditionally modifies the zboot command so that it can use the 32 bit boot protocol. This is necessary because the 16 bit realmode entry point assumes that it can call BIOS services which neither coreboot nor u-boot provide. Signed-off-by: Gabe Black <gabeblack@chromium.org>
* x86: Clean up the x86 zimage code in preparation to extend itGabe Black2011-12-19-37/+45
| | | | | | | | This change cleans up some formatting issues in the zimage handling code, and converts it from using offsets added to a base pointer to using the available structure definitions which were already being included. Signed-off-by: Gabe Black <gabeblack@chromium.org>
* x86: Wrap small helper functions from libgcc to avoid an ABI mismatchGabe Black2011-11-29-0/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When gcc compiles some 64 bit operations on a 32 bit machine, it generates calls to small functions instead of instructions which do the job directly. Those functions are defined in libgcc and transparently provide whatever functionality was necessary. Unfortunately, u-boot can be built with a non-standard ABI when libgcc isn't. More specifically, u-boot uses -mregparm. When the u-boot and libgcc are linked together, very confusing bugs can crop up, for instance seemingly normal integer division or modulus getting the wrong answer or even raising a spurious divide by zero exception. This change borrows (steals) a technique and some code from coreboot which solves this problem by creating wrappers which translate the calling convention when calling the functions in libgcc. Unfortunately that means that these instructions which had already been turned into functions have even more overhead, but more importantly it makes them work properly. To find all of the functions that needed wrapping, u-boot was compiled without linking in libgcc. All the symbols the linker complained were undefined were presumed to be the symbols that are needed from libgcc. These were a subset of the symbols covered by the coreboot code, so it was used unmodified. To prevent symbols which are provided by libgcc but not currently wrapped (or even known about) from being silently linked against by code generated by libgcc, a new copy of libgcc is created where all the symbols are prefixed with __normal_. Without being purposefully wrapped, these symbols will cause linker errors instead of silently introducing very subtle, confusing bugs. Another approach would be to whitelist symbols from libgcc and strip out all the others. The problem with this approach is that it requires the white listed symbols to be specified three times, once for objcopy, once so the linker inserts the wrapped, and once to generate the wrapper itself, while this implementation needs it to be listed only twice. There isn't much tangible difference in what each approach produces, so this one was preferred. Signed-off-by: Gabe Black <gabeblack@chromium.org>
* x86: Import the glibc memset implementationGabe Black2011-11-29-0/+88
| | | | | | | The new implementation is about twice as fast as the old. This is from glibc-2.14, sysdeps/i386/memset.c. Signed-off-by: Gabe Black <gabeblack@chromium.org>
* x86: Fix a few recently added bugsGabe Black2011-11-29-1/+5
| | | | | Signed-off-by: Gabe Black <gabeblack@chromium.org> Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
* x86: Don't relocate symbols which point to things that aren't relocatedGabe Black2011-11-29-11/+8
| | | | | | | | This change adds an upper bound for symbols which are fixed up after u-boot is relocated into RAM. This way portions that are left at their original location can be referred to without having to manually fix up any pointers. Signed-off-by: Gabe Black <gabeblack@chromium.org>
* x86: Fix how the location of the realmode and bios blobs are calculatedGabe Black2011-11-29-2/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are two blobs embedded into the u-boot image which are linked to run at an address which is different from where they actually end up in the ROM, one called "realmode" and one called "bios". There are realmode_setup and bios_setup functions which prepare those blobs by copying them into the location they're supposed to run from, among other things. During u-boot relocation from ROM to RAM, the text and a few data segments are copied over. The realmode and bios sections are not copied, and so the only place they can be read from is their original location in the ROM. Looking specifically at the bios blob, there are symbols defined in the linker script called __bios_start and __bios_size which are defined to be the start and size of the blob in the ROM. In the bios_setup function, there seem to be two mistakes happening. First, the offset from ROM to RAM is being added to __bios_start which implies that this code expects to use the copy moved to RAM. No such copy is made, so that's wrong. More subtly, when u-boot relocates itself, it goes through all of the relocations stored in .rel.dyn and fixes them up. This has the effect of transforming the __bios_start reference in bios_setup so that it refers to the version in RAM (if one existed) instead of the one in ROM. To correct for that, the offset actually needs to be subtracted out again to translate the address back into the ROM. The net effect is that for both blobs, a + needs to be changed to a -. Signed-off-by: Gabe Black <gabeblack@chromium.org>
* x86: Misc PCI touchupsGraeme Russ2011-11-29-3/+7
| | | | Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
* x86: Ensure IDT and GDT remain 16-byte aligned post relocationGraeme Russ2011-11-29-5/+12
| | | | | | Some CPUs have strict alignment requirements for these tables Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
* x86: Provide more configuration granularityGraeme Russ2011-11-29-51/+56
| | | | | | Planned future ports requires more granularity for some options Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
* cosmetic: checkpatch cleanup of arch/x86/lib/*.cGraeme Russ2011-11-29-432/+501
| | | | Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
* x86: Fix a compiler warning in arch/x86/lib/realmode.cGabe Black2011-11-02-1/+1
| | | | | | | Ensure that the value being passed to a %d format specifier is of type int. Signed-off-by: Gabe Black <gabeblack@chromium.org>
* x86: Rename include/asm/ic to include/asm/arch-sc520Graeme Russ2011-11-02-1/+0
| | | Also include some trivial related cleanups
* x86: Use getenv_ulong() in place of getenv(), strtoulSimon Glass2011-10-23-11/+3
| | | | | | This changes the board code to use the new getenv_ulong() function. Signed-off-by: Simon Glass <sjg@chromium.org>
* net: drop !NET_MULTI codeMike Frysinger2011-10-05-2/+0
| | | | | | | | | | | This is long over due. All but two net drivers have been converted, but those have now been dropped. The only thing left to do is actually delete all references to NET_MULTI and code that is compiled when that is not defined. So here we scrub the core code. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Convert ISO-8859 files to UTF-8Albert ARIBAUD2011-08-04-17/+17
| | | | | | | | There was a mix of UTF-8 and ISO-8859 files in the U-Boot source tree, which could cause issues with the patchwork review system. This commit converts all ISO-8859 files to UTF-8. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
* unify version_stringAndreas Bießmann2011-07-28-4/+0
| | | | | | | | | | | | This patch removes the architecture specific implementation of version_string where possible. Some architectures use a special place and therefore we provide U_BOOT_VERSION_STRING definition and a common weak symbol version_string. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> CC: Mike Frysinger <vapier@gentoo.org> CC: Peter Pan <pppeterpppan@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org>
* Timer: Remove reset_timer() for non-Nios2 archesGraeme Russ2011-07-26-5/+0
|
* Timer: Remove set_timer completelyGraeme Russ2011-07-26-7/+0
|
* x86: Rename i386 to x86Graeme Russ2011-04-13-0/+3703
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
generated by cgit v1.1 at 2024-12-19 23:36:48 +0000