summaryrefslogtreecommitdiff
path: root/arch/x86/lib/fsp
Commit message (Collapse)AuthorAgeLines
* x86: Update microcode for secondary CPUsSimon Glass2016-03-17-0/+2
| | | | | | | | Each CPU needs to have its microcode loaded. Add support for this so that all CPUs will have the same version. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: fsp: Make sure HOB list is not overwritten by U-BootBin Meng2016-02-21-0/+33
| | | | | | | | | | | | | | | | | | | | | Intel IvyBridge FSP seems to be buggy that it does not report memory used by FSP itself as reserved in the resource descriptor HOB. The FSP specification does not describe how resource descriptor HOBs are generated by the FSP to describe what memory regions. It looks newer FSPs like Queensbay and BayTrail do not have such issue. This causes U-Boot relocation overwrites the important boot service data which is used by FSP, and the subsequent call to fsp_notify() will fail. To resolve this, we find out the lowest memory base address allocated by FSP for the boot service data when walking through the HOB list in fsp_get_usable_lowmem_top(). Check whether the memory top address is below the FSP HOB list, and if not, use the lowest memory base address allocated by FSP as the memory top address. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Tested on link (ivybridge non-FSP) Tested-by: Simon Glass <sjg@chromium.org>
* x86: baytrail: Add option to disable the internal UART to setup_early_uart()Stefan Roese2016-01-28-1/+1
| | | | | | | | | | | This patch adds a parameter to the function setup_early_uart() to either enable or disable the internal BayTrail legacy UART. Since the name setup_early_uart() does not match its functionality any more, lets rename it to setup_internal_uart() as well in this patch. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* Merge branch 'master' of git://git.denx.de/u-boot-x86Tom Rini2016-01-14-39/+23
|\
| * x86: fsp: Always use hex numbers in the hob command outputBin Meng2016-01-13-2/+2
| | | | | | | | | | | | | | | | | | In the 'fsp hob' command output, decimal numbers and hexadecimal numbers are used mixedly. Now change to always use hex numbers to keep consistency. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
| * x86: fsp: Set up init runtime buffer in update_fsp_configs()Bin Meng2016-01-13-6/+1
| | | | | | | | | | | | | | | | | | fsp_init() runtime buffer parameter might be different across different platforms. Move this to update_fsp_configs(). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
| * x86: fsp: Introduce CONFIG_FSP_USE_UPD Kconfig optionBin Meng2016-01-13-9/+14
| | | | | | | | | | | | | | | | | | | | Not every FSP supports UPD, thus we introduce a Kconfig option CONFIG_FSP_USE_UPD and use it to wrap these common UPD handling codes in fsp_support.c. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
| * x86: fsp: Rename update_fsp_upd() and change its signatureBin Meng2016-01-13-6/+6
| | | | | | | | | | | | | | | | | | | | | | To support platform-specific configurations (might not always be UPD on some platform), use a better name update_fsp_configs() and accepct struct fsp_config_data as its parameter so that platform codes can handle whatever configuration data for that FSP. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
| * x86: fsp: Rename shared_data to fsp_config_dataBin Meng2016-01-13-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | FSP has several config data like UPD, HDA verb table which can be overridden or provided by bootloader. Currently in U-Boot only UPD is handled via struct shared_data. To accommodate any platform, we rename shared_data to fsp_config_data and move the definition from common place fsp_support.h to platform-specific place fsp_configs.h. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
| * x86: fsp: Add boot_mode as a member of struct shared_dataBin Meng2016-01-13-0/+1
| | | | | | | | | | | | | | | | Save boot_mode in struct shared_data for future refactoring. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
| * x86: fsp: Avoid cast stack_top in struct shared_dataBin Meng2016-01-13-2/+2
| | | | | | | | | | | | | | | | | | Declare stack_top as u32 in struct shared_data and struct common_buf so that we can avoid casting in fsp_init(). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
| * x86: fsp: Simplify fsp_continue()Bin Meng2016-01-13-23/+6
| | | | | | | | | | | | | | | | | | There is no need to pass shared_data to fsp_continue() so we can remove unnecessary codes that simplifies the function a lot. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
* | Fix board init code to respect the C runtime environmentAlbert ARIBAUD2016-01-13-2/+2
|/ | | | | | | | | | | | | board_init_f_mem() alters the C runtime environment's stack it is actually already using. This is not a valid behaviour within a C runtime environment. Split board_init_f_mem into C functions which do not alter their own stack and always behave properly with respect to their C runtime environment. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net> Acked-by: Thomas Chou <thomas@wytron.com.tw>
* x86: Remove legacy pci codesBin Meng2015-11-13-5/+0
| | | | | | | | Now that we have converted all x86 boards to use driver model pci, remove these legacy pci codes. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: fsp: Pass mrc cache to fsp_init() and save it to gd after fsp_init()Bin Meng2015-10-21-1/+35
| | | | | | | | | | fsp_init() call has a parameter nvs_buf which is used by FSP as the MRC cache but currently is blindly set to NULL. Retreive the MRC cache from SPI flash and pass it to fsp_init() call. After the call, save FSP produced MRC cache to SPI flash too. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: fsp: Add a hdr sub-command to show header informationBin Meng2015-10-21-1/+31
| | | | | | | | It would be helpful to have a command to show FSP header. So far it only supports FSP header which conforms to FSP spec 1.0. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: fsp: Make hob command a sub-command to fspBin Meng2015-10-21-0/+103
| | | | | | | | | Introduce a new fsp command and make the existing hob command a sub-command to fsp for future extension. Also move cmd_hob.c to the dedicated fsp sub-directory in arch/x86/lib. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: fsp: Report correct number of E820 table entriesBin Meng2015-09-28-1/+2
| | | | | | | | | The logic to calculate the number of E820 table entries is wrong when walking through the FSP HOB tables. Fix it. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Jian Luo <jian.luo4@boschrexroth.de> Acked-by: Simon Glass <sjg@chromium.org>
* x86: fsp: Add comments about U-Boot entering start.S twiceBin Meng2015-08-26-1/+1
| | | | | | | | | Add some comments in start.S for the fact that with FSP U-Boot actually enters the code twice. Also change to use fsp_init() and fsp_continue for accuracy. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: fsp: Enlarge the size of malloc() pool before relocationBin Meng2015-08-26-1/+15
| | | | | | | | | | After fsp_init() returns, the stack has already been switched to a place within system memory as defined by CONFIG_FSP_TEMP_RAM_ADDR. Enlarge the size of malloc() pool before relocation since we have plenty of memory now. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Drop FSP error defines and use EFI insteadSimon Glass2015-08-14-1/+1
| | | | | | | | Now that we have an efi.h header we can use that for FSP error defines. Drop the FSP ones. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Split out fsp_init_phase_pci() code into a new functionSimon Glass2015-08-14-3/+8
| | | | | | | | | | | This code may be useful for boards that use driver model for PCI. Note: It would be better to have driver model automatically call this function somehow. However for now it is probably safer to have it under board control. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: fsp: Do not assert VPD_IMAGE_REV when DEBUGBin Meng2015-08-14-2/+1
| | | | | | | | | | When using different release version of Intel FSP, the VPD_IMAGE_REV is different (ie: BayTrail Gold 3 is 0x0303 while Gold 4 is 0x0304). Remove the asserting of this so that U-Boot does not hang in a debug build. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Add some missing global_data declarations in files that use gdSimon Glass2015-08-05-0/+2
| | | | | | | Some files use global_data but don't declare it. Fix this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Reserve PCIe ECAM address range in the E820 tableBin Meng2015-07-28-0/+6
| | | | | | | | We should mark PCIe ECAM address range in the E820 table as reserved otherwise kernel will not attempt to use ECAM. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: fsp: Move FspInitEntry call to board_init_f()Bin Meng2015-07-14-21/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | The call to FspInitEntry is done in arch/x86/lib/fsp/fsp_car.S so far. It worked pretty well but looks not that good. Apart from doing too much work than just enabling CAR, it cannot read the configuration data from device tree at that time. Now we want to move it a little bit later as part of init_sequence_f[] being called by board_init_f(). This way it looks and works better in the U-Boot initialization path. Due to FSP's design, after calling FspInitEntry it will not return to its caller, instead it jumps to a continuation function which is given by bootloader with a new stack in system memory. The original stack in the CAR is gone, but its content is perserved by FSP and described by a bootloader temporary memory HOB. Technically we can recover anything we had before in the previous stack, but that is way too complicated. To make life much easier, in the FSP continuation routine we just simply call fsp_init_done() and jump back to car_init_ret() to redo the whole board_init_f() initialization, but this time with a non-zero HOB list pointer saved in U-Boot's global data so that we can bypass the FspInitEntry for the second time. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Andrew Bradford <andrew.bradford@kodakalaris.com> Tested-by: Simon Glass <sjg@chromium.org>
* x86: fsp: Load GDT before calling FspInitEntryBin Meng2015-07-14-0/+3
| | | | | | | | | | | | | | | | | | | | | Currently the FSP execution environment GDT is setup by U-Boot in arch/x86/cpu/start16.S, which works pretty well. But if we try to move the FspInitEntry call a little bit later to better fit into U-Boot's initialization sequence, FSP will fail to bring up the AP due to #GP fault as AP's GDT is duplicated from BSP whose GDT is now moved into CAR, and unfortunately FSP calls AP initialization after it disables the CAR. So basically the BSP's GDT still refers to the one in the CAR, whose content is no longer available, so when AP starts up and loads its segment register, it blows up. To resolve this, we load GDT before calling into FspInitEntry. The GDT is the same one used in arch/x86/cpu/start16.S, which is in the ROM and exists forever. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Andrew Bradford <andrew.bradford@kodakalaris.com> Tested-by: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
* x86: fsp_support: Correct high mem comment typoAndrew Bradford2015-06-04-1/+1
| | | | | | | | High mem starts at 4 GiB. Signed-off-by: Andrew Bradford <andrew.bradford@kodakalaris.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: fsp: Use reset_cpu()Simon Glass2015-04-29-7/+0
| | | | | | | | Now that reset_cpu() functions correctly, use it instead of directly accessing the port on boards that use a Firmware Support Package (FSP). Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Allow a UART to be set up before the FSP is readySimon Glass2015-02-06-0/+4
| | | | | | | | | Since the FSP is a black box it helps to have some sort of debugging available to check its inputs. If the debug UART is in use, set it up after CAR is available. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Remove unnecessary casts and fix comment typosSimon Glass2015-02-06-5/+5
| | | | | | | Tidy up the FSP support code a little. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: mmc: Move common FSP functions into a common fileSimon Glass2015-02-06-0/+56
| | | | | | | | | | | | Since these board functions seem to be the same for all boards which use FSP, move them into a common file. We can adjust this later if future FSPs need more flexibility. This creates a generic PCI MMC device. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Make CAR and DRAM FSP code commonSimon Glass2015-02-05-0/+207
| | | | | | | | | For now this code seems to be the same for all FSP platforms. Make it common until we see what differences are required. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Adjust the FSP types slightlySimon Glass2015-02-05-2/+2
| | | | | | | | | | To avoid casts, find_fsp_header() should return a pointer. Add asmlinkage to two API functions which use that convention. UPD_TERMINATOR is common so move it into a common file. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Move common FSP code into a common locationSimon Glass2015-02-05-0/+415
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
generated by cgit v1.1 at 2024-12-28 06:33:10 +0000