summaryrefslogtreecommitdiff
path: root/arch/x86/include
Commit message (Collapse)AuthorAgeLines
* x86: tsc: Remove legacy timer codesBin Meng2015-12-01-1/+0
| | | | | | | | | | | Now that we have converted all x86 boards to use driver model timer, remove these legacy timer codes in the tsc driver. Note this also removes the TSC_CALIBRATION_BYPASS Kconfig option, as it is not needed with driver model. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Remove MIN_PORT80_KCLOCKS_DELAYBin Meng2015-12-01-2/+0
| | | | | | | | | | This is not referenced anywhere. Remove it, as well as tsc_base_kclocks and tsc_prev in the global data. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Fix 'Reomve' typo: Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: Remove legacy pci codesBin Meng2015-11-13-21/+0
| | | | | | | | Now that we have converted all x86 boards to use driver model pci, remove these legacy pci codes. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: queensbay: Really disable IGDBin Meng2015-11-13-4/+3
| | | | | | | | | | | | | | | | | | | | | | According to Atom E6xx datasheet, setting VGA Disable (bit17) of Graphics Controller register (offset 0x50) prevents IGD (D2:F0) from reporting itself as a VGA display controller class in the PCI configuration space, and should also prevent it from responding to VGA legacy memory range and I/O addresses. However test result shows that with just VGA Disable bit set and a PCIe graphics card connected to one of the PCIe controllers on the E6xx, accessing the VGA legacy space still causes system hang. After a number of attempts, it turns out besides VGA Disable bit, the SDVO (D3:F0) device should be disabled to make it work. To simplify, use the Function Disable register (offset 0xc4) to disable both IGD (D2:F0) and SDVO (D3:F0) devices. Now these two devices will be completely disabled (invisible in the PCI configuration space) unless a system reset is performed. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Rename pcat_ to i8254 and i8259 accordinglyBin Meng2015-11-13-1/+1
| | | | | | | | Rename pcat_timer.c to i8254.c and pcat_interrupts.c to i8259.c, to match their header file names (i8254.h and i8259.h). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Fix cosmetic issues in the i8254 and i8259 codesBin Meng2015-11-13-37/+37
| | | | | | | | This cleans up i8254 and i8259 codes to fix several cosmetic issues, like coding convention and some comments improvement. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Rename CONFIG_SYS_NUM_IRQS to SYS_NUM_IRQSBin Meng2015-11-13-0/+2
| | | | | | | | | CONFIG_SYS_NUM_IRQS is actually not something we can configure, but an architecture defined number of ISA IRQs. Move it from x86-common.h to asm/interrupt.h and rename it to SYS_NUM_IRQS. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Use the generic bitops headersFabio Estevam2015-11-05-1/+20
| | | | | | | | | | | | Use the generic bitops and also add custom __ffs() implementation as per the kernel. Also align the ffs() implementation with the kernel. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Jagan Teki <jteki@openedev.com>
* x86: Use struct mrc_region to describe a mrc regionBin Meng2015-10-21-4/+9
| | | | | | | | | | | | | | | | Currently struct fmap_entry is used to describe a mrc region. However this structure contains some other fields that are not related to mrc cache and causes confusion. Besides, it does not include a base address field to store SPI flash's base address. Instead in the mrccache.c it tries to use CONFIG_ROM_SIZE to calculate the SPI flash base address, which unfortunately is not 100% correct as CONFIG_ROM_SIZE may not match the whole SPI flash size. Define a new struct mrc_region and use it instead. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Add more common routines to manipulate mrc cacheBin Meng2015-10-21-0/+51
| | | | | | | | | | | | | | This adds mrccache_reserve(), mrccache_get_region() and mrccache_save() APIs to the mrccache codes. They are ported from the ivybridge implementation, but with some changes. For example, in the mrccache_reserve(), ivybridge version only reserves the pure MRC data, which causes additional malloc() when saving the cache as the save API needs some meta data. Now we change it to save the whole MRC date plus the meta data to elinimate the need for the malloc() later. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Add various minor tidy-ups in mrccache codesBin Meng2015-10-21-10/+10
| | | | | | | | Fix some nits, improve some comments and reorder some codes a little bit. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Do sanity test on the cache record in mrccache_update()Bin Meng2015-10-21-1/+1
| | | | | | | | For the cache record to write in mrccache_update(), we should perform a sanity test to see if it is a valid one. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Move mrccache.[c|h] to a common placeBin Meng2015-10-21-0/+0
| | | | | | | | mrccache implementation can be common for all boards. Move it from ivybridge cpu directory to the common lib directory. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Add SMBIOS table supportBin Meng2015-10-21-0/+236
| | | | | | | | | | | | System Management BIOS (SMBIOS) is a specification for how motherboard and system vendors present management information about their products in a standard format by extending the BIOS interface on Intel architecture systems. As of today the latest spec is 3.0 and can be downloaded from DMTF website. This commit adds a simple and minimum required implementation. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Move install_e820_map() out of zimage.cBin Meng2015-10-21-3/+3
| | | | | | | | install_e820_map() has nothing to do with zimage related codes. Move it to a dedicated place. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Allow disabling IGD on Intel QueensbayBin Meng2015-10-21-0/+5
| | | | | | | | | | Add a Kconfig option to disable the Integrated Graphics Device (IGD) so that it does not show in the PCI configuration space as a VGA disaplay controller. This gives a chance for U-Boot to run PCI/PCIe based graphics card's VGA BIOS and use that for the graphics console. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: quark: Configure MTRR to enable cacheBin Meng2015-09-16-0/+44
| | | | | | | | | | | | | | | | | Quark SoC does not support MSR MTRRs. Fixed and variable range MTRRs are accessed indirectly via the message port and not the traditional MSR mechanism. Only UC, WT and WB cache types are supported. We configure all the fixed range MTRRs with common values (VGA RAM as UC, others as WB) and 3 variable range MTRRs for ROM/eSRAM/RAM as WB, which significantly improves the boot time performance. With this commit, it takes only 2 seconds for U-Boot to boot to shell on Intel Galileo board. Previously it took about 6 seconds. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
* x86: quark: Initialize thermal sensor properlyBin Meng2015-09-16-0/+14
| | | | | | | | | | | | | | Thermal sensor on Quark SoC needs to be properly initialized per Quark firmware writer guide, otherwise when booting Linux kernel, it triggers system shutdown because of wrong temperature in the thermal sensor is detected by the kernel driver (see below): [ 5.119819] thermal_sys: Critical temperature reached(206 C),shutting down [ 5.128997] Failed to start orderly shutdown: forcing the issue [ 5.135495] Emergency Sync complete Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: quark: Lock HMBOUND register before jumping to kernelBin Meng2015-09-16-0/+1
| | | | | | | | | | | | | | When Linux kernel boots, it hangs at: [ 0.829408] Intel Quark side-band driver registered This happens when Quark kernel Isolated Memory Region (IMR) driver tries to lock an IMR register to protect kernel's text and rodata sections. However in order to have IMR function correctly, HMBOUND register must be locked otherwise the system just hangs. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: quark: Add clrbits, setbits, clrsetbits macros for message port accessBin Meng2015-09-16-0/+31
| | | | | | | | | On Intel Quark, lots of registers on the message port need be programmed. Add handy clrbits, setbits, clrsetbits macros for message port access. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* x86: quark: Add PCIe/USB static register programming after memory initBin Meng2015-09-16-0/+22
| | | | | | | | | This adds static register programming for PCIe and USB after memory init as required by Quark firmware writer guide. Although not doing this did not cause any malfunction, just do it for safety. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: quark: Add USB PHY initialization supportBin Meng2015-09-09-0/+8
| | | | | | | | USB PHY needs to be properly initialized per Quark firmware writer guide, otherwise the EHCI controller on Quark SoC won't work. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Enable PCIe controller on quark/galileoBin Meng2015-09-09-0/+42
| | | | | | | | | | | | | Quark SoC holds the PCIe controller in reset following a power on. U-Boot needs to release the PCIe controller from reset. The PCIe controller (D23:F0/F1) will not be visible in PCI configuration space and any access to its PCI configuration registers will cause system hang while it is held in reset. Enable PCIe controller per Quark firmware writer guide. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: quark: Optimize MRC execution timeBin Meng2015-09-09-0/+35
| | | | | | | | | | | | | | | | | Intel Quark SoC has a low end x86 processor with only 400MHz frequency. Currently it takes about 15 seconds for U-Boot to boot to shell and the most time consuming part is with MRC, which is about 12 seconds. MRC programs lots of registers on the SoC internal message bus indirectly accessed via pci bus. To speed up the boot, create an optimized version of pci config read/write dword routines which directly operate on PCI I/O ports. These two routines are inlined to provide better performance too. Now it only takes about 3 seconds to finish MRC, which is really fast (4 times faster than before). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Generate a valid ACPI tableSaket Sinha2015-08-26-0/+393
| | | | | | | | | | | | | | | | | Implement write_acpi_table() to create a minimal working ACPI table. This includes writing FACS, XSDT, RSDP, FADT, MCFG, MADT, DSDT & SSDT ACPI table entries. Use a Kconfig option GENERATE_ACPI_TABLE to tell U-Boot whether we need actually write the APCI table just like we did for PIRQ routing, MP table and SFI tables. With ACPI table existence, linux kernel gets control of power management, thermal management, configuration management and monitoring in hardware. Signed-off-by: Saket Sinha <saket.sinha89@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tidied up whitespace and aligned some tabs: Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: superio: Add keyboard controller support to smsc_lpc47m driverBin Meng2015-08-26-0/+3
| | | | | | | | | Add an api to enable and configure the integrated keyboard controller on SMSC LPC47m superio chipset. It also adds several macros to help future extension. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Remove calculate_relocation_address()Bin Meng2015-08-26-2/+0
| | | | | | | Now that we have generic routine to calculate relocation address, remove the x86 specific one which is now only used by coreboot. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
* x86: coreboot: Increase memrange entry number to 32Bin Meng2015-08-26-6/+3
| | | | | | | | | Increase lib_sysinfo memrange entry number to 32 to sync with coreboot. This allows a complete E820 table to be reported to the kernel, as on some platforms (eg: Bayley Bay) having only 16 entires does not cover all the memory ranges. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Drop FSP error defines and use EFI insteadSimon Glass2015-08-14-11/+0
| | | | | | | | Now that we have an efi.h header we can use that for FSP error defines. Drop the FSP ones. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Move the GDT into global_dataSimon Glass2015-08-14-1/+3
| | | | | | | | | Rather than keeping track of the Global Descriptor Table in its own memory we may as well put it in global_data with everything else. As a first step, stop using the separately allocated GDT. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Remove init_gd() functionSimon Glass2015-08-14-1/+0
| | | | | | | This is declared but no-longer exists. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Allow pirq_init() to return an errorSimon Glass2015-08-14-1/+3
| | | | | | | | This function can fail. In this case we should return the error rather than swallowing it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Split out fsp_init_phase_pci() code into a new functionSimon Glass2015-08-14-0/+7
| | | | | | | | | | | This code may be useful for boards that use driver model for PCI. Note: It would be better to have driver model automatically call this function somehow. However for now it is probably safer to have it under board control. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: fsp: Do not assert VPD_IMAGE_REV when DEBUGBin Meng2015-08-14-2/+0
| | | | | | | | | | When using different release version of Intel FSP, the VPD_IMAGE_REV is different (ie: BayTrail Gold 3 is 0x0303 while Gold 4 is 0x0304). Remove the asserting of this so that U-Boot does not hang in a debug build. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Add support for passing tables into U-BootSimon Glass2015-08-05-0/+1
| | | | | | | | | | | | The EFI stub provides information to U-Boot in a table. This includes the memory map which is needed to decide where to relocate U-Boot. Collect this information in the early init code and store it in global_data. Fix up the BIST code at the same time since we don't have it when booting from EFI and can assume it is 0. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* efi: Add 64-bit payload supportSimon Glass2015-08-05-1/+4
| | | | | | | | | | | | Most EFI implementations use 64-bit. Add a way to build U-Boot as a 64-bit EFI payload. The payload unpacks a (32-bit) U-Boot and starts it. This can be enabled for x86 boards at present. Signed-off-by: Simon Glass <sjg@chromium.org> Improvements to how the payload is built: Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Add a way to call 32-bit code from 64-bit modeSimon Glass2015-08-05-0/+9
| | | | | | | | | The procedure to drop from 64-bit mode to 32-bit is a bit messy. Add a function to take care of it. It requires identity-mapped pages and that the calling code is running below 4GB. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Add an enum for some commonly-used GDT bitsSimon Glass2015-08-05-0/+18
| | | | | | | | Rather than add these as open-coded values, create an enum with the commonly used flags. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Add support for U-Boot as an EFI applicationBen Stoltz2015-08-05-0/+10
| | | | | | | | | | Add the required x86 glue code. This includes the initial start-up, relocation and jumping to efi_main(). We also need to avoid fiddling with interrupts. Signed-off-by: Ben Stoltz <stoltz@google.com> Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Add asm/elf.h for x86-specific ELF definitionsSimon Glass2015-08-05-0/+46
| | | | | | | | Bring in this file from Linux 4.1. It supports relocation features specific to x86. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* efi: Add start-up library codeSimon Glass2015-08-05-57/+2
| | | | | | | | | | | When running as an EFI application, U-Boot must request memory from EFI, and provide access to the boot services U-Boot needs. Add library code to perform these tasks. This includes efi_main() which is the entry point from EFI. U-Boot is built as a shared library. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Allow use of global_data with EFISimon Glass2015-08-05-0/+7
| | | | | | | | | | | | | | | On x86 the global_data pointer is provided through a somewhat-bizarre and x86-specific mechanism: the F segment register is set to a pointer to the start of global_data, so that accesses can use this build-in register. When running as an EFI application we don't want to mess with the Global Descriptor Table (GDT) and there is little advantage (in terms of code size) to doing so. Allow global_data to be a simple variable in this case. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Drop unused copy_fdt_to_ram()Simon Glass2015-08-05-1/+0
| | | | | | | | This is now handled by generic U-Boot code so we do not need an x86 version. It is no-longer called, so remove it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Tidy up global_data flagsSimon Glass2015-08-05-4/+4
| | | | | | | | | | These flags now overlap some global ones. Adjust the x86-specific flags to avoid this. Since this requires a change to the start.S code, add a way for tools to find the 32-bit cold reset entry point. Previously this was at a fixed offset. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: baytrail: Update UPD setting for FSP Gold4 releaseBin Meng2015-08-05-1/+2
| | | | | | | | BayTrail FSP Gold4 release adds one UPD parameter to control IGD enable/disable. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: qemu: Turn on PCIe ECAM address range decoding on Q35Bin Meng2015-07-28-0/+4
| | | | | | | Turn on PCIe ECAM address range decoding on Q35. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: qemu: Enable I/O APIC chip select on PIIX3Bin Meng2015-07-28-1/+5
| | | | | | | | The PIIX3 chipset does not integrate an I/O APIC, instead it supports connecting to an external I/O APIC which needs to be enabled manually. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: mpspec: Allow platform to determine how PIRQ is connected to I/O APICBin Meng2015-07-28-0/+17
| | | | | | | | | Currently during writing MP table I/O interrupt assignment entry, we assume the PIRQ is directly mapped to I/O APIC INTPIN#16-23, which however is not always the case on some platforms. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: pci: Assign pci irqs to all functionsBin Meng2015-07-28-2/+1
| | | | | | | | We need walk through all functions within a PCI device and assign their IRQs accordingly. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Change pci option rom area MTRR setting to cacheableBin Meng2015-07-28-0/+2
| | | | | | | Turn on cache on the pci option rom area to improve the performance. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>