summaryrefslogtreecommitdiff
path: root/arch/x86/include
Commit message (Collapse)AuthorAgeLines
...
* x86: Add the root-complex block to common intel registersSimon Glass2016-03-17-5/+4
| | | | | | | | This is similar to MCH in that it is used in various drivers. Add it to the common header. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Create a common header for Intel register accessSimon Glass2016-03-17-3/+15
| | | | | | | | | | | | | | There are several blocks of registers that are accessed from all over the code on Intel CPUs. These don't currently have their own driver and it is not clear whether having a driver makes sense. An example is the Memory Controller Hub (MCH). We map it to a known location on some Intel chips (mostly those without FSP - Firmware Support Package). Add a new header file for these registers, and move MCH into it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Move microcode code to a common locationSimon Glass2016-03-17-0/+0
| | | | | | | This code is used on several Intel CPUs. Move it into a common location. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: cpu: Add functions to return the family and steppingSimon Glass2016-03-17-0/+14
| | | | | | | | These two identifiers can be useful for drivers which need to adjust their behaviour depending on the CPU family or stepping (revision). Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Add comments to the SIPI vectorSimon Glass2016-03-17-0/+1
| | | | | | | | | The Intel SIPI (start-up inter-processor interrupt) vector is the entry point for each secondary CPU (also called an AP - applications processor). The assembler and C code are linked, so add comments to indicate this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Correct duplicate POST valuesSimon Glass2016-03-17-2/+2
| | | | | | | Two power-on-self-test values are the same. Fix this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: gpio: Correct GPIO setup orderingSimon Glass2016-03-17-0/+5
| | | | | | | | | | | | | The Intel GPIO driver can set up the GPIO pin mapping when the first GPIO is probed. However, it assumes that the first GPIO to be probed is in the first GPIO bank. If this is not the case then the init will write to the wrong registers. Fix this. Also add a note that this code is deprecated. We should move to using device tree instead. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Add some more common MSR indexesSimon Glass2016-03-17-18/+40
| | | | | | | | | Many of the model-specific indexes are common to several Intel CPUs. Add some more common ones, and remove them from the ivybridge-specific header file. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Support booting SeaBIOSBin Meng2016-03-17-0/+3
| | | | | | | | | | | | | | | SeaBIOS is an open source implementation of a 16-bit x86 BIOS. It can run in an emulator or natively on x86 hardware with the use of coreboot. With SeaBIOS's help, we can boot some OSes that require 16-bit BIOS services like Windows/DOS. As U-Boot, we have to manually create a table where SeaBIOS gets system information (eg: E820) from. The table unfortunately has to follow the coreboot table format as SeaBIOS currently supports booting as a coreboot payload. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* x86: Implement functions for writing coreboot tableBin Meng2016-03-17-0/+10
| | | | | | | | To prepare generating coreboot table from U-Boot, implement functions to handle the writing. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* x86: Change write_acpi_tables() signature a little bitBin Meng2016-03-17-1/+1
| | | | | | | | Change the parameter and return value of write_acpi_tables() to u32 to conform with other table write routines. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* x86: Use a macro for ROM table alignmentBin Meng2016-03-17-0/+2
| | | | | | | Define ROM_TABLE_ALIGN instead of using 1024 directly. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* x86: Clean up coreboot_tables.hBin Meng2016-03-17-73/+80
| | | | | | | | | Clean up this file a little bit: - Remove inclusion of <linux/compiler.h> - Use tab in the macro definition Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* x86: Move sysinfo related to sysinfo.hBin Meng2016-03-17-4/+2
| | | | | | | | coreboot_tables.h should not include sysinfo related stuff. Move those to asm/arch-coreboot/sysinfo.h. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* x86: Move asm/arch-coreboot/tables.h to a common placeBin Meng2016-03-17-1/+1
| | | | | | | | Move asm/arch-coreboot/tables.h to asm/coreboot_tables.h so that coreboot table definitions can be used by other x86 builds. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* x86: ivybridge: Add FSP supportBin Meng2016-02-21-0/+52
| | | | | | | | | | IvyBridge FSP package is built with a base address at 0xfff80000, and does not use UPD data region. This adds basic FSP support. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Tested on link (ivybridge non-FSP) Tested-by: Simon Glass <sjg@chromium.org>
* x86: Drop pci_type1.c and DEFINE_PCI_DEVICE_TABLEBin Meng2016-02-05-7/+0
| | | | | | | | | Now that we have converted all x86 codes to DM PCI, drop pci_type1.c which is only built for legacy PCI. Also per checkpatch.pl warning, DEFINE_PCI_DEVICE_TABLE is now deprecated so drop that too. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* x86: pci: Drop legacy PCI APIsBin Meng2016-02-05-12/+0
| | | | | | | | | Now that we have converted all x86 codes to use DM PCI APIs, drop those legacy ones. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
* x86: irq: Move irq_router to a per driver privBin Meng2016-02-05-4/+8
| | | | | | | | | | | At present irq_router is declared as a static struct irq_router in arch/x86/cpu/irq.c. Since it's a driver control block, it makes sense to move it to a per driver priv. Adjust existing APIs to accept an additional parameter of irq_router's udevice. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
* x86: Drop asm/arch/gpio.hBin Meng2016-02-05-89/+0
| | | | | | | | | asm/arch/gpio.h is not needed anymore as we get the GPIO base from PCH driver. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
* x86: qemu: add the ability to load and link ACPI tables from QEMUMiao Yan2016-01-28-0/+61
| | | | | | | | | | | This patch adds the ability to load and link ACPI tables provided by QEMU. QEMU tells guests how to load and patch ACPI tables through its fw_cfg interface, by adding a firmware file 'etc/table-loader'. Guests are supposed to parse this file and execute corresponding QEMU commands. Signed-off-by: Miao Yan <yanmiaobest@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
* x86: qemu: setup PM IO base for ACPI in southbridgeMiao Yan2016-01-28-0/+7
| | | | | | | | Enable ACPI IO space for piix4 (for pc board) and ich9 (for q35 board) Signed-off-by: Miao Yan <yanmiaobest@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
* x86: qemu: re-structure qemu_fwcfg_list_firmware()Miao Yan2016-01-28-3/+6
| | | | | | | | | Re-write the logic in qemu_fwcfg_list_firmware(), add a function qemu_fwcfg_read_firmware_list() to handle reading firmware list. Signed-off-by: Miao Yan <yanmiaobest@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
* x86: baytrail: Add option to disable the internal UART to setup_early_uart()Stefan Roese2016-01-28-1/+1
| | | | | | | | | | | This patch adds a parameter to the function setup_early_uart() to either enable or disable the internal BayTrail legacy UART. Since the name setup_early_uart() does not match its functionality any more, lets rename it to setup_internal_uart() as well in this patch. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* x86: ivybridge: Use syscon for the GMA deviceSimon Glass2016-01-24-2/+4
| | | | | | | | | Until we have a proper video uclass we can use syscon to handle the GMA device, and avoid the special device tree and PCI searching. Update the code to work this way. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Set up a shared syscon numbering schemaSimon Glass2016-01-24-0/+9
| | | | | | | | | Each system controller can have a number to identify it. It can then be accessed using syscon_get_by_driver_data(). Put this in a shared header file and update the only current user. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: ivybridge: Drop XHCI supportSimon Glass2016-01-24-1/+0
| | | | | | | This is not used on link which is the only ivybridge board. Drop this code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: ivybridge: Drop special EHCI initSimon Glass2016-01-24-1/+0
| | | | | | | | | | This is not needed. On reset wake-on-disconnect is already set. It may a problem during a soft reset or resume, but for now it does not seem important. Also drop the command register update since PCI auto-config does it for us. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: ivybridge: Sort out the calls to bridge_silicon_revision()Simon Glass2016-01-24-1/+7
| | | | | | | | This function is called all over the place. Convert it use the driver model PCI API, and rationalise the calls. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: ivybridge: Move code from pch.c to bd82x6x.cSimon Glass2016-01-24-18/+0
| | | | | | | This code relates to the PCH, so we should move it into the same file. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: ivybridge: Convert pch.c to use DM PCI APISimon Glass2016-01-24-5/+37
| | | | | | | Convert this file to use the driver model PCI API. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: ivybridge: Convert report_platform to DM PCI APISimon Glass2016-01-24-1/+1
| | | | | | | Convert these functions to use the driver model PCI API. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: ivybridge: Convert SDRAM init to use driver modelSimon Glass2016-01-24-5/+40
| | | | | | | | | SDRAM init needs access to the Northbridge controller and the Intel Management Engine device. Add the latter to the device tree and convert all of this code to driver model. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: ivybridge: Move LPC init into the LPC probe() methodSimon Glass2016-01-24-2/+0
| | | | | | | | Drop the lpc_init_extra() function and just use the post-relocation LPC probe() instead. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: ivybridge: Move lpc_enable() into gma.cSimon Glass2016-01-24-1/+0
| | | | | | | | This graphics init code is best placed in the gma init code. Move the code and drop the function. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: ivybridge: Use the SATA driver to do the initSimon Glass2016-01-24-1/+0
| | | | | | | | Instead of manually initing the device, probe the SATA device and move the init there. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: ivybridge: Drop the unused bd82x6x_init_extra()Simon Glass2016-01-24-1/+0
| | | | | | | This function does nothing now so can be dropped. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: ivybridge: Do the SATA init before relocationSimon Glass2016-01-24-1/+0
| | | | | | | | | The SATA device needs to set itself up so that it appears correctly on the PCI bus. The easiest way to do this is to set it up to probe before relocation. This can do the early setup. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: ivybridge: Use driver model PCI API in bd82x6x.cSimon Glass2016-01-24-3/+0
| | | | | | | | | Adjust most of the remaining functions in this file to use the driver model PCI API. The one remaining function is bridge_silicon_revision() which will need a little more work. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: ivybridge: Move northbridge and PCH init into driversSimon Glass2016-01-24-1/+0
| | | | | | | | | | Instead of calling the northbridge and PCH init from bd82x6x_init_extra() when the PCI bus is probed, call it from the respective drivers. Also drop the Northbridge init as it has no effect. The registers it touches appear to be read-only. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Make x86_init_cpus() staticSimon Glass2016-01-24-2/+0
| | | | | | | | There are no other implementations of this function, and boards that need it can implement a CPU driver. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: ivybridge: Move CPU init code into the driverSimon Glass2016-01-24-15/+0
| | | | | | | | Use the CPU driver's probe() method to perform the CPU init. This will happen automatically when the first CPU is probed. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: ivybridge: Rename lpc_init() to lpc_init_extra()Simon Glass2016-01-24-1/+1
| | | | | | | | In preparation for adding an init() method to the LPC uclass, rename this existing function so that it will not conflict. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: ivybridge: Rename bd82x6x_init()Simon Glass2016-01-24-1/+1
| | | | | | | | Rename the existing bd82x6x_init() to bd82x6x_init_extra(). We will remove this in a later patch. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: ivybridge: Move lpc_early_init() to probe()Simon Glass2016-01-24-10/+0
| | | | | | | | Move this code to the LPC's probe() method so that it will happen automatically when the LPC is probed before relocation. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* dm: x86: Drop the weak cpu_irq_init() functionSimon Glass2016-01-24-10/+0
| | | | | | | | There are no callers now. Platforms which need to set up interrupts their own way can implement an interrupt driver. Drop this function. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* dm: x86: Add a common PIRQ init functionSimon Glass2016-01-24-0/+7
| | | | | | | | | Most x86 interrupt drivers will want to use the standard PIRQ routing and table setup. Put this code in a common function so it can be used by those drivers that want it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* dm: x86: Set up interrupt routing from interrupt_init()Simon Glass2016-01-24-10/+0
| | | | | | | | | | | | | | | At present interrupt routing is set up from arch_misc_init(). We can do it a little later instead, in interrupt_init(). This removes the manual pirq_init() call. Where the platform does not have an interrupt router defined in its device tree, no error is generated. Some platforms do not have this. Drop pirq_init() since it is no-longer used. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
* Add more SPDX-License-Identifier tagsTom Rini2016-01-19-12/+1
| | | | | | | | | In a number of places we had wordings of the GPL (or LGPL in a few cases) license text that were split in such a way that it wasn't caught previously. Convert all of these to the correct SPDX-License-Identifier tag. Signed-off-by: Tom Rini <trini@konsulko.com>
* Merge branch 'master' of git://git.denx.de/u-boot-x86Tom Rini2016-01-14-29/+159
|\
generated by cgit v1.1 at 2024-11-05 10:33:49 +0000