summaryrefslogtreecommitdiff
path: root/arch/x86/include
Commit message (Collapse)AuthorAgeLines
* x86: broadwell: Add an LPC driverSimon Glass2016-03-17-0/+32
| | | | | | | | Add a driver for the broadwell LPC (low-pin-count peripheral). This mostly uses common code. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Bin Meng <bmeng.cn@gmail.com>
* x86: broadwell: Add a pinctrl driverSimon Glass2016-03-17-0/+91
| | | | | | | | | | | GPIO pins need to be set up on start-up. Add a driver to provide this, configured from the device tree. The binding is slightly different from the existing ICH6 binding, since that is quite verbose. The new binding should be just as extensible. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Bin Meng <bmeng.cn@gmail.com>
* x86: broadwell: Add a PCH driverSimon Glass2016-03-17-0/+153
| | | | | | | Add a driver for the broadwell low-power platform controller hub. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Add basic support for broadwellSimon Glass2016-03-17-0/+446
| | | | | | | | This adds the broadwell architecture, with the CPU driver and some useful header files. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Add support for running Intel reference codeSimon Glass2016-03-17-0/+12
| | | | | | | | | | | | Intel has invented yet another binary blob which firmware is required to run. This is run after SDRAM is ready. It is linked to load at a particular address, typically 0, but is a relocatable ELF so can be moved if required. Add support for this in the build system. The file should be placed in the board directory, and called refcode.elf. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Drop all the old pin configuration codeSimon Glass2016-03-17-141/+0
| | | | | | | | We don't need this anymore - we can use device tree and the new pinconfig driver instead. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Add an ICH6 pin configuration driverSimon Glass2016-03-17-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a driver which sets up the pin configuration on x86 devices with an ICH6 (or later) Platform Controller Hub. The driver is not in the pinctrl uclass due to some oddities of the way x86 devices work: - The GPIO controller is not present in I/O space until it is set up - This is done by writing a register in the PCH - The PCH has a driver which itself uses PCI, another driver - The pinctrl uclass requires that a pinctrl device be available before any other device can be probed It would be possible to work around the limitations by: - Hard-coding the GPIO address rather than reading it from the PCH - Using special x86 PCI access to set the GPIO address in the PCH However it is not clear that this is better, since the pin configuration driver does not actually provide normal pin configuration services - it simply sets up all the pins statically when probed. While this remains the case, it seems better to use a syscon uclass instead. This can be probed whenever it is needed, without any limitations. Also add an 'invert' property to support inverting the input. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Update microcode for secondary CPUsSimon Glass2016-03-17-0/+3
| | | | | | | | Each CPU needs to have its microcode loaded. Add support for this so that all CPUs will have the same version. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Record the CPU details when starting each coreSimon Glass2016-03-17-0/+9
| | | | | | | | As each core starts up, record its microcode version and CPU ID so these can be presented with the 'cpu detail' command. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Allow I/O functions to use pointersSimon Glass2016-03-17-2/+10
| | | | | | | | | | | | | | | | | | | | | It is common with memory-mapped I/O to use the address of a structure member to access memory, as in: struct some_regs { u32 ctrl; u32 data; } struct some_regs *regs = (struct some_regs *)BASE_ADDRESS; writel(1, &reg->ctrl); writel(2, &reg->data); This does not currently work with inl(), outl(), etc. Add a cast to permit this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Add macros to clear and set I/O bitsSimon Glass2016-03-17-0/+22
| | | | | | | | | | The clrsetbits_...() macros are useful for working with memory mapped I/O. But they do not work with I/O space, as used on x86 machines. Add some macros to provide similar features for I/O. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: ivybridge: Drop sandybridge_early_init()Simon Glass2016-03-17-2/+0
| | | | | | | | This function was removed in the previous clean-up. Drop it from the header file also. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Move Intel Management Engine code to a common placeSimon Glass2016-03-17-334/+393
| | | | | | | | | | Some of the Intel ME code is common to several Intel CPUs. Move it into a common location. Add a header file for report_platform.c also. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> [squashed in http://patchwork.ozlabs.org/patch/598372/] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Rename PORT_RESET to IO_PORT_RESETSimon Glass2016-03-17-1/+1
| | | | | | | This same name is used in USB. Add a prefix to distinguish it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Move common CPU code to its own placeSimon Glass2016-03-17-2/+44
| | | | | | | | Some of the Intel CPU code is common to several Intel CPUs. Move it into a common location along with required declarations. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Move common LPC code to its own placeSimon Glass2016-03-17-2/+59
| | | | | | | | Some of the LPC code is common to several Intel LPC devices. Move it into a common location. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Add the root-complex block to common intel registersSimon Glass2016-03-17-5/+4
| | | | | | | | This is similar to MCH in that it is used in various drivers. Add it to the common header. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Create a common header for Intel register accessSimon Glass2016-03-17-3/+15
| | | | | | | | | | | | | | There are several blocks of registers that are accessed from all over the code on Intel CPUs. These don't currently have their own driver and it is not clear whether having a driver makes sense. An example is the Memory Controller Hub (MCH). We map it to a known location on some Intel chips (mostly those without FSP - Firmware Support Package). Add a new header file for these registers, and move MCH into it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Move microcode code to a common locationSimon Glass2016-03-17-0/+0
| | | | | | | This code is used on several Intel CPUs. Move it into a common location. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: cpu: Add functions to return the family and steppingSimon Glass2016-03-17-0/+14
| | | | | | | | These two identifiers can be useful for drivers which need to adjust their behaviour depending on the CPU family or stepping (revision). Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Add comments to the SIPI vectorSimon Glass2016-03-17-0/+1
| | | | | | | | | The Intel SIPI (start-up inter-processor interrupt) vector is the entry point for each secondary CPU (also called an AP - applications processor). The assembler and C code are linked, so add comments to indicate this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Correct duplicate POST valuesSimon Glass2016-03-17-2/+2
| | | | | | | Two power-on-self-test values are the same. Fix this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: gpio: Correct GPIO setup orderingSimon Glass2016-03-17-0/+5
| | | | | | | | | | | | | The Intel GPIO driver can set up the GPIO pin mapping when the first GPIO is probed. However, it assumes that the first GPIO to be probed is in the first GPIO bank. If this is not the case then the init will write to the wrong registers. Fix this. Also add a note that this code is deprecated. We should move to using device tree instead. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Add some more common MSR indexesSimon Glass2016-03-17-18/+40
| | | | | | | | | Many of the model-specific indexes are common to several Intel CPUs. Add some more common ones, and remove them from the ivybridge-specific header file. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Support booting SeaBIOSBin Meng2016-03-17-0/+3
| | | | | | | | | | | | | | | SeaBIOS is an open source implementation of a 16-bit x86 BIOS. It can run in an emulator or natively on x86 hardware with the use of coreboot. With SeaBIOS's help, we can boot some OSes that require 16-bit BIOS services like Windows/DOS. As U-Boot, we have to manually create a table where SeaBIOS gets system information (eg: E820) from. The table unfortunately has to follow the coreboot table format as SeaBIOS currently supports booting as a coreboot payload. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* x86: Implement functions for writing coreboot tableBin Meng2016-03-17-0/+10
| | | | | | | | To prepare generating coreboot table from U-Boot, implement functions to handle the writing. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* x86: Change write_acpi_tables() signature a little bitBin Meng2016-03-17-1/+1
| | | | | | | | Change the parameter and return value of write_acpi_tables() to u32 to conform with other table write routines. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* x86: Use a macro for ROM table alignmentBin Meng2016-03-17-0/+2
| | | | | | | Define ROM_TABLE_ALIGN instead of using 1024 directly. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* x86: Clean up coreboot_tables.hBin Meng2016-03-17-73/+80
| | | | | | | | | Clean up this file a little bit: - Remove inclusion of <linux/compiler.h> - Use tab in the macro definition Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* x86: Move sysinfo related to sysinfo.hBin Meng2016-03-17-4/+2
| | | | | | | | coreboot_tables.h should not include sysinfo related stuff. Move those to asm/arch-coreboot/sysinfo.h. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* x86: Move asm/arch-coreboot/tables.h to a common placeBin Meng2016-03-17-1/+1
| | | | | | | | Move asm/arch-coreboot/tables.h to asm/coreboot_tables.h so that coreboot table definitions can be used by other x86 builds. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* x86: ivybridge: Add FSP supportBin Meng2016-02-21-0/+52
| | | | | | | | | | IvyBridge FSP package is built with a base address at 0xfff80000, and does not use UPD data region. This adds basic FSP support. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Tested on link (ivybridge non-FSP) Tested-by: Simon Glass <sjg@chromium.org>
* x86: Drop pci_type1.c and DEFINE_PCI_DEVICE_TABLEBin Meng2016-02-05-7/+0
| | | | | | | | | Now that we have converted all x86 codes to DM PCI, drop pci_type1.c which is only built for legacy PCI. Also per checkpatch.pl warning, DEFINE_PCI_DEVICE_TABLE is now deprecated so drop that too. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* x86: pci: Drop legacy PCI APIsBin Meng2016-02-05-12/+0
| | | | | | | | | Now that we have converted all x86 codes to use DM PCI APIs, drop those legacy ones. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
* x86: irq: Move irq_router to a per driver privBin Meng2016-02-05-4/+8
| | | | | | | | | | | At present irq_router is declared as a static struct irq_router in arch/x86/cpu/irq.c. Since it's a driver control block, it makes sense to move it to a per driver priv. Adjust existing APIs to accept an additional parameter of irq_router's udevice. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
* x86: Drop asm/arch/gpio.hBin Meng2016-02-05-89/+0
| | | | | | | | | asm/arch/gpio.h is not needed anymore as we get the GPIO base from PCH driver. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
* x86: qemu: add the ability to load and link ACPI tables from QEMUMiao Yan2016-01-28-0/+61
| | | | | | | | | | | This patch adds the ability to load and link ACPI tables provided by QEMU. QEMU tells guests how to load and patch ACPI tables through its fw_cfg interface, by adding a firmware file 'etc/table-loader'. Guests are supposed to parse this file and execute corresponding QEMU commands. Signed-off-by: Miao Yan <yanmiaobest@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
* x86: qemu: setup PM IO base for ACPI in southbridgeMiao Yan2016-01-28-0/+7
| | | | | | | | Enable ACPI IO space for piix4 (for pc board) and ich9 (for q35 board) Signed-off-by: Miao Yan <yanmiaobest@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
* x86: qemu: re-structure qemu_fwcfg_list_firmware()Miao Yan2016-01-28-3/+6
| | | | | | | | | Re-write the logic in qemu_fwcfg_list_firmware(), add a function qemu_fwcfg_read_firmware_list() to handle reading firmware list. Signed-off-by: Miao Yan <yanmiaobest@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
* x86: baytrail: Add option to disable the internal UART to setup_early_uart()Stefan Roese2016-01-28-1/+1
| | | | | | | | | | | This patch adds a parameter to the function setup_early_uart() to either enable or disable the internal BayTrail legacy UART. Since the name setup_early_uart() does not match its functionality any more, lets rename it to setup_internal_uart() as well in this patch. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* x86: ivybridge: Use syscon for the GMA deviceSimon Glass2016-01-24-2/+4
| | | | | | | | | Until we have a proper video uclass we can use syscon to handle the GMA device, and avoid the special device tree and PCI searching. Update the code to work this way. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Set up a shared syscon numbering schemaSimon Glass2016-01-24-0/+9
| | | | | | | | | Each system controller can have a number to identify it. It can then be accessed using syscon_get_by_driver_data(). Put this in a shared header file and update the only current user. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: ivybridge: Drop XHCI supportSimon Glass2016-01-24-1/+0
| | | | | | | This is not used on link which is the only ivybridge board. Drop this code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: ivybridge: Drop special EHCI initSimon Glass2016-01-24-1/+0
| | | | | | | | | | This is not needed. On reset wake-on-disconnect is already set. It may a problem during a soft reset or resume, but for now it does not seem important. Also drop the command register update since PCI auto-config does it for us. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: ivybridge: Sort out the calls to bridge_silicon_revision()Simon Glass2016-01-24-1/+7
| | | | | | | | This function is called all over the place. Convert it use the driver model PCI API, and rationalise the calls. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: ivybridge: Move code from pch.c to bd82x6x.cSimon Glass2016-01-24-18/+0
| | | | | | | This code relates to the PCH, so we should move it into the same file. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: ivybridge: Convert pch.c to use DM PCI APISimon Glass2016-01-24-5/+37
| | | | | | | Convert this file to use the driver model PCI API. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: ivybridge: Convert report_platform to DM PCI APISimon Glass2016-01-24-1/+1
| | | | | | | Convert these functions to use the driver model PCI API. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: ivybridge: Convert SDRAM init to use driver modelSimon Glass2016-01-24-5/+40
| | | | | | | | | SDRAM init needs access to the Northbridge controller and the Intel Management Engine device. Add the latter to the device tree and convert all of this code to driver model. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: ivybridge: Move LPC init into the LPC probe() methodSimon Glass2016-01-24-2/+0
| | | | | | | | Drop the lpc_init_extra() function and just use the post-relocation LPC probe() instead. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
generated by cgit v1.1 at 2024-11-10 06:14:24 +0000